Problems with dynamic data slices and BEx Analyzer

Hello experts,
we use a data slice to lock released data.
This data slice contains an exit-variable which selects all plan that are already released out of a ABAP dictionary table.
The user can release data via planning function. He can start this function with a button in a BEx workbook.
He use the same workbook for insert planning data.
the problem is:
when a user releases data, the value of the exit variable in our data slice changes but the data slice 9999 seems to be NOT generated with the new value. the reuslt is, that the user can still change released data.
the data slice is just new generated after logout and login again not after refresh the query.
Is there a possibility to force the system to generate data slice 9999 with the actual value of the exit variable? maybe a function module or method?
We have this problem just in BEx Analyzer. In Web Reporting everything works fine and the data is locked by the data slice after refresh.
Thank you
Johannes

Hallo Johannes,
if you want to have this kind of behaviour you need to go for a data slice of type exit. You will find some information about this in the Planning forum.
The data slice is instantiated once, but when you release the data you need to call a method in your exit data slice which rereads the values. This is a rough idea how this could be done.
Regards Matthias Nutt
SAP Consulting Switzerland

Similar Messages

Help In keithley 2400 VI!!(Problem with the data logging and graph plotting)

Hi,need help badly=(.
My program works fine when i run it,and tested it out with a simple diode.The expected start current steps up nicely to the stop current.The only problem is when it ends,i cannot get the data log and the graph,though i already have write code for it.Can someone help me see what's wrong with the code?I've attached the necessary file below,and i'm working with Labview 7.1.
Thanks in advance!!!
Attachments:
24xx Swp-I Meas-V gpib.llb ‏687 KB

Good morning,
Without the instrument it might be hard for others to help
troubleshoot the problem. Was there a
specific LabVIEW programming question you had, are you having problems with the
instrument communication, are there errors?
I’d like to help, but could you provide some more specific information
on what problems you are encountering, and maybe accompany that with a simple
example which demonstrates the behavior?
In general we don’t we will be unable to open specific code and debug,
but I’d be happy to help with specific questions.
I did notice, though, that in your logging VI you have at
least one section of code which appears to not do anything. It could be that a small section of code, or
a wire was removed and the data is not being updated correctly (see pic below). Is your file being opened properly? Is the data being passed to the file
properly? What are some of the things
you have examined so far?
Sorry I could not provide the ‘fix’, but I’m confident that
we can help. Thanks for posting, and
have a great day-
Message Edited by Travis M. on 07-11-2006 08:51 AM
Travis M
LabVIEW R&D
National Instruments
Attachments:
untitled.JPG ‏88 KB

Problem with BLOB data type and acute characters

Hi all, I have an issue related with BLOBS cols:
I have table A with a BLOB column and I need to insert that data into another table B, the thing is I use dbms_lob.read() that returns data into a RAW variable and then I convert it to a varchar2(with utl_raw.cast_to_varchar2) and it works ok if I have no "acute characters" on it, e.g Québec.
If I have acute characters, the "é" is inserted wrongly with an "¿" character on the table B. I tested the BLOB on the table A to check the data and the BLOB is showing correctly the "é" character, it seems that the dbms_lob.read() funct cannot handle accute characters and replace them with "¿".
How can I replace acute characters when I use the dbms_lob.read functionality?
Thank you!

what's the OS of the db server? is this code an anonymous pl/sql block, or stored pl/sql? does it run on the server or a client? if it's on the client, what's the o/s of the client?
you might want to look at the following, plus the first 3 notes in it's reference section
https://metalink.oracle.com/metalink/plsql/f?p=130:14:3038746456038321058::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,264157.1,1,1,1,helvetica

Problem with the Date format and sending it to R/3

Hi all,
I have an Adaptive RFC application which fetches the data from the R/3 and displays the Employee's Personal Data.
I am using a ZFM which is customised as per the requirement from the Standard BAPI_EMPLOYEE_GETDATA.
Now the Problem i am facing is Date is default and Optional Parameter in RFC.
If i execute the RFC in R/3 without Date it is not filling the Internal Tables. And if i pass the Date it is filling the Internal Table and fetches the Records.
So in WD application i am inputing Employee FirstName, LastName or the Employee ID.
User can give any of the above input or combination of FirstName and LastName Or only the Employee ID.
Now the Main Problem is of Date which is of type Date.
I have also tried the SimpleDateFormat Class, but i am not able to achieve the result.
I have also seen the Links and threads on SDN, but unable to solve the problem.
So pls help me out asap.
Thanks & Regards,
Dhruv Shah

Hi ,
By default , RFC accept date format of SQL date (yyyy-mm-dd) . If you are using a date picker from WD, it directly set the date in SQL date format. Incase if you are trying to pass date to RFC in some other way you have to convert that into SQL date format before passing.
if you are passing String date of format dd-mm-yyyy , you try this method to convert that to SQL date and pass to your RFC.
public java.sql.Date sqlDateConvert( String date) {
    //@@begin sqlDateConvert()
     java.sql.Date dateObj=null;
     try{
          StringTokenizer tempStringTokenizer = new StringTokenizer(""+date,"-");          int dd=Integer.parseInt(tempStringTokenizer.nextToken().trim());
                                int mm=Integer.parseInt(tempStringTokenizer.nextToken().trim());
          mm=mm-1;
          int yyyy=Integer.parseInt(tempStringTokenizer.nextToken().trim());
          Calendar cal =Calendar.getInstance();
          cal.set(yyyy,mm,dd);
          dateObj = new java.sql.Date( cal.getTime().getTime());
     }catch(Exception e)
          return dateObj;
Hope this will help you.

Problem with the data source and web.xml

I have an issue where JSC is removing my resource reference:
<resource-ref>
<description>Creator generated DataSource Reference</description>
<res-ref-name>jdbc/localOracleDatabase</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
from the web.xml and sun-web.xml.
The application has been working great in the IDE for months then wham, no more data source definition. I try and add the reference manually and the IDE takes it out. I am "NOT" adding it to the .xml's in the build area. Why is JSC removing the data source entry?

This continues to be a problem. The only way that I can get around the problem is to drag a table from the data source onto the design pallete and then the datasource is added back to the web.xml. I can run fine for 10 or 15 runs then the entry is once again removed from the web.xml.
Help please!

Problem with dynamic columns in the BEx report

Hi Gurus,
I am tryging to build some planning application using BI-IP and input ready queries.
I'm facing issues with making the columns in the query 'dynamic'. The example is given below: -
Lets say there are states and cities for which we have to plan sales volumes. Depending on the value I choose for 'State' it should create as many columns for 'Cities' as per the hierarchy of the cities.
Lets say if I choose Maharashtra then the report shud look like :-
State-> Maharashtra
Rows               Column1                      Column2                      Column3
GL Account      Mumbai/0quantity        Pune/0quantity            Aurangabad/ 0quantity
1000000            1000                               1500                              1200
State--> Karnatka
Rows                 Column1                  Column2
GL account        Bangalore                 Mangalore
1000000
Any idea how this can be achieved?
Best Regards,
SSC

Hi friend,
See the link below it is having the solution of hiding the columns in smart forms
Hide table columns in smart form?
Create a table to display your values with 12 col and hide the columns based on the idea provided in the link above.
I think this will solve your issue if you still have queries please revert back to me i will help you.
Thanks,
Sri Hari

Problem with concatenated data store and VACHAR(4000) field

Have a concatenated data store built from 18 columns in one table. The main column for the index is a VARCHAR(4000) field. When we insert more than 3215 characters in that field the row disappers from the index, 3215 characters or less works fine.
Anyone know why?

hi,
If you want to display them in an input field you will need to use expression box and use the formula as store@datastorefield.
if you want to display in the Plain text go to the display tab in the properties of plain text and use the same formula here, in plain text you can only display the values present in the datastore.
Regards,
Rk.

Problem with exit Variable in may BEx Analyzer Workbook

Hello,
I have created a workbook. In this workbook I use the 0CMONTH variable. I always want to get the previous month. For that I have the variable 0CMONTH-1 inserted in the query at default values in the query designer by 0calmonth.
It will automatically deliver the previous month.
When I put this query in the Bex Excel Anayzer Workbook, then comes the following message:
Diagnosis
In the query definition, the default values of characteristic
[0CALMONTH]Calendar Year/Month are stored as variables. The system tires to fill
these variables again from the last restrictions so that it can use them as
default values. In this case, however, the restriction is so complex, that the
variable values cannot be reconstructed from it.
System Response
Procedure
Change the restrictions in the query result if necessary.
Procedure for System Administration
Kind Regards
Kerim

Hello,
I can not find the SAP variable 0CMLMON in 0CALMONTH. I have OI_CMNTH, 0CMONTH ...
Do I have to register somewhere?
regards
Kerim

Problem with Java Dates and UPDATE for SQL2000

I am having problems with the date formats for Java. I am trying to put the current date time into a SQL table, here it the code I am using:
var Today = new Date()
var conn = Server.CreateObject( "ADODB.Connection" )
conn.Open( "Provider=SQLOLEDB;Server=(local);Database=BillTracking;UID=sa;PWD=;")
var sql = "UPDATE BillAssignments SET DatePosted = " + Today + " WHERE AssignmentID = '" + Request.QueryString("AssignmentID") + "'"
var rs = conn.execute(sql)
I keep getting different errors and I have been unable to find a solution yet. I know that I need to change the date format from the Java standard to the one that SQL likes.
Help....
Norm...

Please tell us where the Java part of this comes in. I see that you are using JavaScript to load up data via an ADO connection (presumably on an IIS platform) - but I do not see where you are using Java
Lee

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to use sync data in my iphone back to itune n my lap top. how can I perform this task with out loosing data in my i phone.

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to sync data in my iphone back to itune on my lap top. how can I perform this task with out loosing data in my i phone.

Hey floridiansue,
Do you have an installed email program such as Microsoft Outlook? If your email is through an online login, such as Gmail, etc, then one will have to create an email association with a program such as Microsoft Outlook on the PC for this Scan to Email system to function.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Problems with retrieving data from tables with 240 and more records

Hi,
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.
I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables.
First I used the same connection string, driver and so on (O10 Oracle 10g) then I tried ORA Oracle but with no luck. The result is like this:
I'm able to connect to database. I'm able to retrieve data but from small tables (e.g. with 110 records it works perfectly using both O10 and ORA drivers). When I try to retrieve data from tables with like 240 and more records retrieval simply hangs (nothing happens at all - no error, no timeout). Application seems to hang forever.
I'm using Powerbuilder to connect to Database (either PB10.5 using O10 driver or PB12 using ORA driver). I used DBTrace, so I see that query hangs on the first FETCH.
So for the retrievals that hang I have something like:
(3260008): BIND SELECT OUTPUT BUFFER (DataWindow):(DBI_SELBIND) (0.186 MS / 18978.709 MS)
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=1
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): EXECUTE:(DBI_DW_EXECUTE) (192.982 MS / 19171.691 MS)
(3260008): FETCH NEXT:(DBI_FETCHNEXT)
and this is the last line,
while for retrievals that end, I have FETCH producing time, data in buffer and moving to the next Fetch until all data is retrieved
On the side note, I have no problems with retrieving data either by SQL Developer or DbVisualizer.
Problems started when I installed 11.2.0 Client. Even if I want to use 10.0.1 Client, the same problem occurs. So I guess something from 11.2.0 overrides 10.0.1 settings.
I will appreciate any comments/hints/help.
Thank you very much.

pgoel wrote:
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.Earlier (before installing new stuff) did you ever try retrieving data from big tables (like 240 and more records), if yes, was it working?Yes, with Oracle 10g client (before installing 11g) I was able to retrieve any data, either it was 10k+ records or 100 records. Installing 11g client changed something that even using old 10g client (which I still have installed) fails to work. The same problem occur no matter I'm using 10g or 11g client now. Powerbuilder hangs on retrieving tables with more than like 240 records.
Thanks.

Spotify and facebook problem with the date

Hi, everyone.My spotify account have a problem with the date. I changed the date on facebook and nothing happens with that, the spotify account has a wrong date, is not the same as facebook account

Hi ,
By default , RFC accept date format of SQL date (yyyy-mm-dd) . If you are using a date picker from WD, it directly set the date in SQL date format. Incase if you are trying to pass date to RFC in some other way you have to convert that into SQL date format before passing.
if you are passing String date of format dd-mm-yyyy , you try this method to convert that to SQL date and pass to your RFC.
public java.sql.Date sqlDateConvert( String date) {
    //@@begin sqlDateConvert()
     java.sql.Date dateObj=null;
     try{
          StringTokenizer tempStringTokenizer = new StringTokenizer(""+date,"-");          int dd=Integer.parseInt(tempStringTokenizer.nextToken().trim());
                                int mm=Integer.parseInt(tempStringTokenizer.nextToken().trim());
          mm=mm-1;
          int yyyy=Integer.parseInt(tempStringTokenizer.nextToken().trim());
          Calendar cal =Calendar.getInstance();
          cal.set(yyyy,mm,dd);
          dateObj = new java.sql.Date( cal.getTime().getTime());
     }catch(Exception e)
          return dateObj;
Hope this will help you.

Difference between bexbrowser and Bex analyzer

Hi,
   can any body tell me what is the difference between bex browser and bex analyzer and how end users will access the reports and how they access SAP.

Hi
*BEx Web Analyzer *
The BEx Web Analyzer is a standalone, convenient Web application for data analysis that you can call using a URL or as an iView in the portal.
The Web Analyzer allows you to execute ad hoc analyses on the Web: When you have selected a data provider (query, query view, InfoProvider, external data source), the data is displayed in a table with a navigation pane. You can navigate to the data and use other Web Analyzer functions available in the application toolbar. For example, you can change the type of data display, use the information broadcasting functions to broadcast your analyses to others, and create printable versions of your analyses.
In the Web Analyzer, you can save the data view generated from navigation and analysis as a query view by choosing Save View in the context menu, and you can save the ad hoc analysis by choosing Save As. When the query view is saved, only the data view is saved; when the ad hoc analysis is saved, the entire Web application is saved, including the properties of Web items and the layout of the data.
Check the link for more info
http://help.sap.com/erp2005_ehp_03/helpdata/EN/00/e8d13f7fb44c21e10000000a1550b0/frameset.htm
Bex Browser
The Business Explorer Browser (BEx Browser) makes it possible for you to access all document types of the Business Information Warehouse that are assigned to your role or that you have stored in your favorites. You can select and open documents assigned to you in the BEx Browser or store and manage new documents in the BEx Browser.
Document types that you can work with in the BEx Browser are:
·        BW workbooks
·        Documents that are stored in the Business Document Service (BDS)
·        Links (references to file system, shortcuts)
·        Links to internet sites (URLs)
·        SAP transaction calls.
·        Web applications and Web templates
·        Crystal Reports
Regards
Shilpa

How to call javascript function with dynamic data in display tag

Hi,
Iam new to pagination concept. Iam using display tag to display rows in jsp by strtus.
I have a problem when calling the javascript function using ahref in attribute in display tag.
<bean:define name="form1" property="EditDetails.List" id="ListDisplay"/>
<display:table name="pageScope.ListDisplay" cellpadding="0" cellspacing="1" pagesize="10" partialList="false" size="listSize" requestURI="">
<display:column property="poNo" href='javascript:searchEditDetails("./submitOrder.do? actionID=getMISLoadEdit&poNumberSel=<%=((com.po.bean.EditDetails)poListDisplay).getNo()%>&statusIdSelected=<%=((com.po.bean.EditDetails)ListDisplay).getStatusId()%>")'
title="Number"/>
<display:column property="strDate"title="Date" />
<display:column property="orderValue"title="Order Value(INR)"/>
<display:column property="stringRequestedDeliveryDate"title="Suggested Delivery Date"/>
<display:column property="statusDescription" title="Status" />
</display:table>
The above code display the data in row format is working fine when I click the No It thow javascript error and its not redirecting to the other page.
When I try this with ordinary struts its working fine the code is:
<logic:iterate id="polist" name="Form1" property="EditDetails.List" indexId="i" type="com.bean.EditDetails">
<tr>
<td ><a href="javascript:searchEditDetails("./submitOrder.do?actionID=getMISLoadEdit&NumberSel=<%=((com.bean.EditDetails)polist).getNo()%>&statusIdSelected=<%=((com.bean.EditDetails)polist).getStatusId()%>")"><html:hidden name="polist" property="No" write="true" /></a>     </td>
<td><html:hidden name="polist" property="strDate" write="true" /></td>
<td><html:hidden name="polist" property="orderValue" write="true" /></td>
<td><html:hidden name="polist" property="stringRequestedDeliveryDate" write="true" />     </td>
<td><html:hidden name="polist" property="statusDescription" write="true" /></td>
</tr>
</logic:iterate>
Please help me how to call javascript with dynamic data.
Thanks in advance

The ADF Mobile Container Utilities API may be used from JavaScript or Java.
Application Container APIs - 11g Release 2 (11.1.2.4.0)

Connect an 1-D array of cluster of 3 elements with dynamic data

hi everybody.
I am trying to wire an 1-D array which consists of a cluster of 3 elements with dynamic data. The error that appears says that I'm trying to "connect two terminals of different types". Actually, what I want to do is write to a file the FFT data produced by the Spectral Measurements vi. In order to write to a file, I am using the Write to Measurement File vi, but I don't know if this is the right way to do this. Has anyone any idea about this problem, because I'm out of ideas....
Thanks a lot!!

ok! This works really good! thanks a lot! now i'm facing an other problem...The output file does not contain the right data. I want to collect the FFT (frequency vs. amplitude) of a time signal and it gives me the record length and the sampling rate instead.
For example, if I use a sampling rate of 300 ksamples/sec and a record length of 1000 sampling points, the file to be created has one column containing the record length e.g.
0
1
2
3
498
499
and on more column containing almost zero values and the value of the sample rate. Do you have any idea why this is happening?
Thank you!!

Problems with dynamic data slices and BEx Analyzer

Similar Messages

Maybe you are looking for