Problems with early 2011 MacBook Pro 13" 2.7 GHz / OWC Mercury Extreme Pro

*Has anyone else experienced issues getting their OWC Mercury Extreme Pro SSD working in the early 2011 MacBook Pros?*
I am having difficulties getting OS X installed on the new OWC Mercury Extreme Pro 240 GB. When I install the SSD in place of the factory HDD and boot from the 10.6.6 reinstallation DVD the SSD is not visible to the installation program. If I quit the 10.6.6 installer and run Disk Utility (from the 10.6.6 installation DVD) the SSD is not visible. If I quit Disk Utility and run System Profiler (from the 10.6.6. installation DVD) the drive is visible and firmware and serial numbers are displayed. So like the drive is visible to OS X but the installer / Disk Utility can not see it.
If I put the SSD in an external USB enclosure it is visible - I can format the drive and copy files to it.
I also tried installing the SSD in place of the factory HDD, putting the HDD in a USB enclosure, booting from the OS X installation on the HDD and running the OS X installer from the 10.6.6 DVD. I was able to select the SSD as the target for the installation and the initial file copy was OK, but when the laptop restarted during the installation the SSD would not boot. The grey folder icon with the flashing question mark was displayed instead. Holding down Option while booting only gave me the option to boot from the DVD.
I also tried resetting the NVRAM and SMC of the MacBook Pro - this did not resolve the issue.
I spoke to OWC support who said they did not know of any compatibility issues with the new MacBook Pros and suggested I request a replacement.
The firmware version of the SSD is 350a13f0

This is my exact problem. I have had 2 of these drives so far and both of them have had the same problem with installation internally. The first one I was able to get operational using the method you described, ie: put the OWC SSD in an external case (FW800 was my choice) and install it there. But I encountered the sleep issues, so I sent it back for a replacement.
The second drive I was finally able to install using the second method, but now the computer regularly locks up. So I'm going to call again and hopefully the third try will work.
Just to clarify. The first drive had sleep issues, but had the older firmware. The second drive had the newer firmware (360 I think it is) and didn't have the sleep issues, but locks up while running.
I'm so irritated on how many hours I've spent on this issue. And their support department, though very nice, wasn't helpful at all. It's as if they never heard of this problem.

Similar Messages

  • Is it OCZ Agility 3 480GB SATA3 compatible with Early 2011 macbook pro?

    Hello everyone, i'm insteresting to change my Hard Drive to a Solid State Drive on my MacBook Pro 15inch early 2011. I'm thinking to buy this one (OCZ Agility 3 480GB 2.5" SATA 6Gb/s Solid State Hard Drive - (AGT3-25SAT3-480G)) but I don't know if is it compatible with my macbook version.
    Here some details about the SSD
    Read Speed: 525MB/Sec,
    Write Speed: 500MB/Sec,
    Flash: MLC,
    Controller: SandForce SF-2281,
    Buffer: 0MB
    My Macbook details
    CPU: 2.2 Intel Core i7
    Ram: 8GB
    So what do you think? Is tis compatible or not?
    Thank you
    George

    Hi Eleni1,
    If you are having intermittent but persistent WiFi issues with your MacBook Pro, you may find the troubleshooting steps outlined in the following article helpful. You may also want to consider upgrading to OS X 10.8.4 or later to take advantage of the more advanced Wireless Diagnostics that were added with that release.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Regards,
    - Brenden

  • Anyone have problems with a 2011 MacBook Air battery going dead

    Has anyone had repeated issues with their  11" MacBook Air battery dying?  I took mine in about 3-6 months ago and they replaced the battery.  It was fried.  It's happened again.  Has anyone else had the same problems?  Has anyone got apple to replace their Air with a newer model free of charge?  Please reply back if anyone has had similar problems.  Thank you.

    How exactly are you using your Air?
    A: are you ever or often letting your Air shut down from power loss?
    B: do you have your Air always charging AND in sleep mode?
    Your service on your battery has a warranty, contact Apple for another visit for full diagnostic and possible repair.
    your logic board could have a fault causing the battery to dissipate abnormally.

  • Early 2011 MacBook Pro 15 model freezing problems

    I've been experiencing problems with my 2011 MacBook Pro 15 model with it freezing on me all the time.  I have read around and came to a conclusion that it is a logic board problem on the logic board that supports 3 GBs on the superdrive bay.  Have any of you had this problem? What did you do to get the problem resolved? I'm going to my local Apple store to try to get this fixed (With the current logic board that supports 6 GBs on the superdrive bay) or get a replacement laptop. Thanks for your input!

    You are doing the right thing.
    Take it to the Apple Store . Let them fix it for you.
    Nobody here can help you with hardware problems.
    Best.

  • LaCie Desktop Manager doesn't recognize LaCie RAID with my 2011 MacBook Pro

    Hello,
    I have a new MacBook Pro 17" but I am not able to use the LaCie Desktop Manager with the LaCie 4big Quadra Enterprise Class RAID. The drive is recognized by the finder via eSATA, FireWire, USB, but is not recognized by the LaCie Desktop Manager. This prevents me from encrypting the drive. The LaCie Desktop Manager could recognize the raid with my early 2008 MacBook Pro.
    I'd like to know if anyone else is having the same problem with their 2011 MacBook Pro.
    I have been communicating with LaCie support but he tells me that he can't check the same or similar configuration as mine.
    Thanks,
    Dennis

    Looks like the cable is the same if you still have the 2010.
    http://www.ifixit.com/MacBook-Parts/MacBook-Pro-15-Inch-Unibody-Mid-2009-Mid-201 0-Early-2011-SATA-SuperDrive-Cable/IF161-040

  • Early 2011 MacBook Pro- The thermal paste discussion.

    It is my goal to clear up the questions and concerns Apple customers have been having regarding heat or fan related concerns with Early 2011 MacBook Pros. If your MacBook Pro was produced within the last few months the thermal issue has been resolved and it will likely not be in issue for you. If you are still wondering if your computer is effected or what the real issue is keep reading.
    The MacBook Cools itself by 2 main methods: active and passive. The active cooling is via a fan that blows air through a heatsync and into a tube called a heat pipe which leads to the back of the computer where the hot air is discharged through a vent at the bottom of the screen behind the hinge. The fan lowers the air pressure inside the case causing outside air is drawn in the case, displacing the hot air inside and helping to cool the other components.
    The computer uses passive cooling to remove the residual heat from the processor which comes mostly in the form of radiant heat. Passive cooling is also used to cool the other components of the computer (memory, disk drives, battery etc). Passive cooling works by conductive heat transfer ie. syncing to the case of the computer. Some of the heat then is radiated. Some of it is transferred from the outside of the case via convective cooling; the foot pads on the bottom cover are designed to raise it up just enough to allow air underneath for convection to occur. (Convection is the process in which hot air to rises and is displaced by cooler air.) The rest of the heat from the bottom cover is absorbed by whatever surface you have the computer on.
    The processor will not sync to the case very much if the board is assembled properly however the other components of the computer will, requiring the case to be in open air to allow for passive cooling to take place.
    If you have some sort of covering such as a plastic snap on case it will likely interfere with passive cooling in all of it's 3 of it forms, this will cause the computer to be abnormally hot. I recently saw someone in the Apple store with a MacBook Air experiencing abnormal heating due to a plastic snap case so this particular problem is not unique to MacBook Pros and it is not the cause of the issue being discussed here. I do not recommend the use or anything that covers the computer while it is running with the exception of something that covers the back of the display panel only. If you are worried about your computer getting damaged go and buy a laptop insurance policy from Worth Ave group. The insurance does not cover cosmetic damage or misplaced items but will cover accidental damage including spills. This insurance also covers theft, vandalism and natural disasters, is quite inexpensive and the claims process and deductible  is similar to most phone insurance plans (which they also offer).
    User induced overheating can also occur when the computer is placed on an improper surface such as a couch cushion, car seat, bed, pillow etc. Doing this can interfere with both passive and active cooling.
    As I mentioned earlier In all likelihood if your computer was produced after May it is not affected. I personally have been in posession of 3 MacBook Pros, one produced before May which had the problem, one after which had no problems and one produced more recently that has mind blowing thermal performance way beyond all of my expectations.
    So the question at this point is exactly what is the problem, how can it be diagnosed and how can it be rectified.
    After extensive research and testing I have determined the issue to be related to improper application thermal paste. I involuntarily became involved in this pursuit as a result of the problems I was experiencing and I did not initially come at from an objective viewpoint but rather one of cautious skepticism. I had anticipated before purchasing my computer that there may be a thermal issue. This anticipaion came as a result of reading an article on ifixit.com about the disassembly of the brand new early 2011 MacBook Pro. When the technician performing the disassembly removed the main heat sync he expressed concern about how much much thermal paste was present, expressing that it seemed excessive. This lead the technician to question wether or not it would cause heating problems.
    Proper application of thermal paste is critical to the functionality of the active cooling system and when applied improperly will not properly transfer the heat to the heat-sync which in turn gets cooled by the fan. Proper application of thermal paste insures the heat is removed from the case as efficiently as possible. Doing this both reduces the speed at which the fan needs to run in a lot of situations and prevents too much heat from the processor needing to be cooled by passive means. If is is not applied properly it will eventually lead to overheating of the case as well as the other components of the computer. This can cause damage firstly to the computer's battery and can also significantly shorten the life computer. (Or any other kind of electronic device for that matter.)
    The problem can be diagnosed by testing the computer using a program called System Load or any other software that will put your computers proscessor use up to its maximum and keep it there indefinitely. Placing full load on your GPU at the same time during the test is also recommended. Keep in mind, if you are using your computer the fan will spin up if needed for additional cooling. You should expect the fan go up to its maximum speed during the test, it is not in of itself an indication of a negative result. Make sure to have the computer plugged in, fully charged and on a proper surface. A desk or other flat surface should be fine. Exceptions would include the top of a refrigerator since it has insulation just underneath the metal exterior or any surface that is heated by any means such as a dryer or other appliance.
    (The temps to follow are in ºF)
    Run the test for up to 1 hour. If the case of the computer breaks 93 degrees your unit is likely affected. Expect the unit to even possibly reach temps approaching and exceeding 100º, if this happens immediately abort the test. Also look for the processor temp shooting up to around 180 in the first 30 seconds and the fan spinning up right away. Typically on a properly functioning unit the temperature of the case will end up being somewhere in the neighborhood of 88-91º. If this test is preformed in a room with a normal ambient room temperature of about 68 degrees. Even after an hour the case of the computer should not be significantly hot, just warm to the touch. On a normally operating unit the fan will start to kick in within 90 seconds or so and may not reach full speed even after several minuets.
    At one point the case of my computer actually reached 95º during normal web browsing.
    This is a problem that I have had successfully corrected twice by reapplication of thermal paste. The first time was on a machine produced prior to may and the second was after a logic board was replaced at the repair depot. (I suspect the inventory turnover is lower for boards than whole computers resulting in a board from the initial production run being installed in my computer.)
    If you forget everything I just wrote remember this. #1 if you are using your computer hard enough the fan will end up running at high speed at some point. #2 This problem is not in any way related to the design of the MacBook Pro, or its use/application. #3 This mostly not a problem of the CPU being too hot; these Sandy Bridge CPUs are rated for 212ºf and will routinely be in the neighborhood of 200º, this is hotter than other chips but well within design limits. #4 I have done everything in my power to make sure that this problem has been corrected and I have every logical and evidenced based reason to believe it has been resolved in machines produced after may. #5 This is not an Apple acknolidged issue. Technicians will tell you that there is no problem because these higher temps are normal and within operating limits and if they weren't the machine would shut itself off. (This is a bit extreme; just like a lot of other devices such as electronics, toaster ovens and space heaters with thermal overload protection this automatic shutoff is intended to occur when damage or risk of fire is imminent because the device is WAY outside of normal operating paramaters.) They will also not tell you when asked what these limits are, that they know what they are or in some cases that such figures they even exsist.
    I stake my personal and professional reputation on the accuracy of my findings, it is my job as a private consultant to help my clients to resolve complicated and expensive issues just like this one.
    Bottom line if you are having a problem and Apple won't fix it on warranty don't ditch your machine, just pay to have it done yourself. In most cases you can pay have it done at the Apple store. It will probably cost you less than 100.00, and it will not void your warranty as long as the work is done by Apple certified technician. It will be well worth it; after all in spite of this MacBook Pro's are hands down the best portable computers on the market, with an industry leading warranty and support to back it up. On it's worst day Apple's service and support is better than any computer/ consumer electronics company, even on its best day.
    I hope this helps to clarify this issue! I also hope it will help anyone affected to resolve the problem instead of resorting to a refund and settling for something else.

    hello all
    you can try this:
    Go to system preferences > settings > built in display >  see bottom of window.
    check "show mirroring options in the menu bar when available". then click "airplay display" > and select your device.
    That's what happened to my MBP - 15-inch, Late 2011 model.

  • I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck and will post the output. Please can someone help me with what it all means.Thanks in advance

    I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck. Please can someone help me with what it all means.
    Thanks in advance.
    EtreCheck version: 1.9.15 (52)
    Report generated 19 September 2014 08:07:14 GMT+8
    Hardware Information: ?
      MacBook Pro (13-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.3 GHz Intel Core i5 CPU: 2 cores
      4 GB RAM
    Video Information: ?
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ?
      OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:29
    Disk Information: ?
      Hitachi HTS545032B9A302 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 319.21 GB (147 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      MATSHITADVD-R   UJ-898 
    USB Information: ?
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ?
      Apple Inc. thunderbolt_bus
    Gatekeeper: ?
      Mac App Store and identified developers
    Kernel Extensions: ?
      [not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
      [loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
      [loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [running] com.sophos.autoupdate.plist Support
      [running] com.sophos.configuration.plist Support
      [running] com.sophos.intercheck.plist Support
      [running] com.sophos.notification.plist Support
      [running] com.sophos.scan.plist Support
      [running] com.sophos.sxld.plist Support
      [running] com.sophos.webd.plist Support
      [running] com.trusteer.rooks.rooksd.plist Support
    Launch Agents: ?
      [loaded] com.divx.dms.agent.plist Support
      [loaded] com.divx.update.agent.plist Support
      [running] com.sophos.uiserver.plist Support
      [running] com.trusteer.rapport.rapportd.plist Support
    User Launch Agents: ?
      [loaded] com.adobe.ARM.[...].plist Support
      [running] com.amazon.music.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
    User Login Items: ?
      iTunesHelper
      TomTomHOMERunner
      AdobeResourceSynchronizer
      Dropbox
    Internet Plug-ins: ?
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      EPPEX Plugin: Version: 10.0 Support
      Default Browser: Version: 537 - SDK 10.9
      OVSHelper: Version: 1.1 Support
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
    Safari Extensions: ?
      Ultimate
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
      Flash Player  Support
      Perian  Support
      Trusteer Endpoint Protection  Support
    Time Machine: ?
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 297.29 GB Disk used: 160.38 GB
      Destinations:
      Data [Network] (Last used)
      Total size: 2 TB
      Total number of backups: 99
      Oldest backup: 2012-04-20 17:05:32 +0000
      Last backup: 2014-09-18 23:49:25 +0000
      Size of backup disk: Excellent
      Backup size 2 TB > (Disk size 297.29 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU: ?
          6% InterCheck
          5% iCalExternalSync
          3% WindowServer
          2% CalendarAgent
          2% SystemUIServer
    Top Processes by Memory: ?
      152 MB SophosScanD
      147 MB InterCheck
      106 MB SophosAntiVirus
      66 MB Dropbox
      57 MB com.apple.iTunesLibraryService
    Virtual Memory Information: ?
      161 MB Free RAM
      1.55 GB Active RAM
      1.41 GB Inactive RAM
      902 MB Wired RAM
      611 MB Page-ins
      0 B Page-outs

    Uninstall Trusteer software
    http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
    Remove Sophos
    https://discussions.apple.com/message/21069437#21069437

  • I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?

    I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?
    Do Not post stuff about how Airplay doesnt work, because i dont have Apple TV and dont need to hear about it.

    If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

  • How can I connect my Early 2011" Macbook Pro 13" inch, with a generic Mini Display Port to HDMI connector, to a LG 32LD340 LCD TV, using Mountain Lion 10.8.2?

    I have an Early 2011" macbook pro 13 inch (core i5 2.3ghz 4gb ram 320hdd) with Mountain Lion 10.8.2, and I want to connect it via Mini DP to HDMI connector, and a HDMI cable to a LCD TV LG 32LD340. When I had Lion OS, I had no problems at all.

    If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

  • If I buy an external monitor (with a res of 2560x1440) will my early 2011 MacBook Pro work ok? And will it be utilising the monitors full res or not?

    Hi,
    I have an early 2011 MacBook Pro. I use Premiere Pro CS5 to video edit on. It's fine but when it comes to grading it's nearly impossible on such a small screen.
    I'd like to buy a 27inch external monitor (Asus, Samsung, Dell, whatever - haven't decided yet) for when I'm editing at work (which is most days). My query is regarding the resolutions. Obviously my MacBook Pro displays a resolution of 1280x800, so if I buy a monitor with a resolution of 2560x1440 for example, what gets displayed?
    And also does the connecting cable make any difference? For example, if I'm connecting by Thunderbolt out to HDMI, then an HDMI to HDMI cable to the external monitor, what happens then? Or should I be using a Mini Display Port to Display Port connecting lead?
    I guess all I really want to know is, will it work? But also, am I wasting my money buying an external monitor with a 2560x1440 resolution? Should I just go for one that's the same res at my MacBook Pro?
    I've never really understood how these things all work!
    Thanks in advance for anyones help.
    Regards,
    Phil   

    I think it will work.  You would need a mini displayport to (single link) DVI adapter to hook up that monitor.
    Not sure what kind of problems you had with the ViewSonic but I'm guessing the Dell is probably a better monitor anyhow.

  • Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?

    Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
    I have 2 and cannot seem to get them to work?

    Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
    I have 2 and cannot seem to get them to work?

  • My early 2011 MacBook Pro says battery not detected and does not work with a new battery either. Works only with the charger plugged in.

    About a year back i had replaced the MLB of my early 2011 macbook pro and it was all working fine. A month back my battery went dead saying "Battery Not Detected". I went to Ample technologies, Bangalore, India and gave it for diagnosis. Ample technologies are the authorized Apple support service in Bangalore, India. After 3 days and no phone calls they email me that "They feel that the MLB MIGHT be the problem and they want to test it by replacing the MLB and i have to pay for their testing". I had already spent 40k indian rupees ($700) less than a year back to replace an MLB and now they want to replace it again at the cost of 43k ($750) indian rupees. I have no idea what to do now. Spending 80k indian rupees ($1400) in less than a year to replace the MLB twice sounds unfair to me. Can someone help me out here ? Is there a valid warranty period applicable , since i have changed the MLB a year back ?

    short of doing a SMC reset, you maybe at their mercy.
    resetting the  SMC http://support.apple.com/kb/ht3964
    You can try yourself running the Apple Hardware Test- and see if it generates any error codes. Post the results
    AHT  http://support.apple.com/kb/HT1509

  • HT2845 can't get my apple magic mouse to work on my boot camp on my early 2011 macbook pro with latest Marveric OS

    I can't get my apple magic mouse to work on my boot camp,running Windows 7 Ultimate on my early 2011 macbook pro with latest Marveric OS........ It works perfectly on the Apple ,

    Not sure if this will help anyone, but I had trouble installing on 10.8.
    I then found this particular support page:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&s w_lang=&product=4231205#N228
    Be patient with the download, it takes some time ... When it has downloaded, follow the install instructions. It works well.
    I use the printer through usb but my wife uses wireless from her PC laptop.
    Andre Francis

  • My early 2011 MacBook Pro 15" non-glare display has developed a dark band at the edges of the screen approximately the same width as the aluminum surround. This wasn't present when the MBP was new. Am near an Apple Store, but anyone else had this problem

    My early 2011 MacBook Pro 15" non-glare display has developed a dark band at the edges of the screen approximately the same width as the aluminum surround. This wasn't present when the MBP was new. I'm near an Apple Store and can take the laptop in, but has anyone else had this problem?

    Thanks for your input. I didn't completely flesh out what I'm seeing visually. The resolution settings are all correct for my screen. The problem is if, say, looking at the gray startup screens or a completely white full-screen image, there is a perimeter of graying, almost as if the LEDs are somehow not as bright as the rest. It's also curious that the thickness of this phenomenon is almost exactly the same as the metal bezel around the display. I will be taking it to an Apple Store for a look, as I'm also having several minor hardware problems that need to be addressed and remedied.

  • Airplay mirroring on early 2011 macbook pro not mirroring

    First, here's what I have:
    Early 2011 macbook pro (identifier 8,3) with 2.2 Intel Core i7 processor connected over Wifi on 2.4 Ghz channel.
    OSX 10.8 Mountain Lion
    Apple TV 3 (fully up to date)
    The stats I've read say airplay mirroring should work fine.  I can connect both machines just fine. I can stream movies just fine. I can send music just fine.  I just cannot mirror my desktop.  I have the icons, a connection is made, but all that shows is a blank screen. I've adjusted the resolutions with no luck.  I've shut down and rebooted both machines with no luck...
    Any solutions or do I have to count my losses with Apple Airplay and spend more money on a 3rd party alternative (AirParrot)?

    Hi eoinodonnell,
    The problem was resolved, but I have the worst answer... it just started working, and has remained reliable since.  I never found out exactly what fixed it, but I would try these things:
    1) Try a factory reset on the Apple TV, and make sure your Macbook pro has all the latest updates.
    2) Try to repair disk permissions (better to do it from disk utility from boot menu) and reboot your macbook.
    3) Backup your files and do a fresh install of OSX.
    I know I performed all these tasks, and possibly more, but something along the way did fix the problem. 
    I hope something here works!  If so, please let me know what did it.

Maybe you are looking for

  • Sharing i-tunes on different computers

    I want to share my I Tunes library at home with my work computer how do i do that?

  • Final Cut Pro running very slow

    I've just re-installed OSX 10.3.9 and Final Cut Pro was the first program I put back on. But it's now running incredibly show - 12 hours to render 4 minutes. And any time I click anyhere, whether in the timeline or menu bar, there's a few seconds lag

  • Problem sybcing movies

    I'm having a syncing issue. I manually sync ATV and for some reason, the movies I have recently purchased directly on atv are not showing up in my itunes menu so I can't watch them on my imac. However, if I purchase on my computer and then sync the m

  • IPhoto has destroyed my external library yet again

    I've been using an external firewire HD to contain my expanding photo library because there's (a) not enough room on my MacBook Pro, and (b) I don't want to lose all my photos if my computer is lost/damaged/stolen. So I've noticed the most infuriatin

  • VI to determine what applicatio​ns and services are running in memory.

    I need to be able to determine if a LabVIEW executable is running. If I had access to the info in the Task Manager window (running .exe's) -  that would provide all the needed information.