Problems with EAXC_Theme_PCApp_LB_3_10_13 update after installat

Hi.
I was just wondering if anyone else got this issue before I started looking the knowledge base.
I just tried to install the update for the EAX Console for my card seeing as how I met the redquirements for it and whatever potential problems that might have occured without the update..
Anyways I installed the update, and now for some reason I can not use any of the Mediasource components at all, when I start the machine the Creative system volume program comes up with an error and has to close, also I cannot seem to get the EAX console to come up nor can I do the same with mixer, graphic equilizer, speaker settings. The components that do work are diagnostics, which report no problems with the hardware and the software components connected to it, and the device control.
this is my set up.
P4 2.8, FSB 533
GB pc200 DDR 266
40 GB Seagate ATA HDD
ati Radeon 9600 XT
SB Li've 24bit(Retail not OEM)
I also have a newer LG DVD burner, but seeing as this is a downloaded update and not a disc one, I doubt that it is my newer dri've that is the source of the problem.

Similar Messages

Problem with iWork updates after iOS 5.1 install

iTunes showed updates for my iWork apps, but indicated I needed to update to iOS 5.1 first. I updated to iOS 5.1, and then did the updates for Pages, Keynote, and Numbers. The Pages update was successful. The updates for Keynote and Numbers will not load, but now I can't use either app at all. The app shows up with the loading ticker at the bottom, but when touched, indicates "Waiting", then a message comes up that says "Unable to Download Application", with choices for "Done" or "Retry." "Retry" does nothing and the message comes up again. I've tried restarting and resetting with no success.
Thoughts?
Thanks.

Here's how to fix this.
1) Get your playlist in the order you want in iTunes.
2) Create a new playlist and drag all the songs into it from the sorted playlist.
The next 2 are important!!!
3) Do not change the order using any of the column headers.
4) Do not select Copy To Play Order.
5) (Optional) Delete old playlist, rename new playlist.
Sync your device.
The problem is in the sorting. If you don't sort your playlist via the column headers you're OK.
Hope this helps.

Problem with App update after upgrade to ios7

Hi
I have just upgraded to ipads (ipad2 + ipad mini) to ios7.
One thing I have noticed on both.
I updated apps in the app store, now the apps that updated are sitting on the screen, they have been updated, and can be opened.
However in the past once apps had been updated this screen would clear.
I have tried logging out/in in itunes. Hard reset. Restore from itunes.
Still the same.
How do I refresh this screen.
Cheers
Andy.

Hi
I cannot find it again, but I found a possible answer in another forum.
It is correect. Ios 7 has an option for auto app update.
The information is left on the screen to advise you which apps have been updated. Apparently they will clear after a week, only time will tell.
If I find the link I will repost.
One thing I noticed was that if you delete the app the update notice goes, only to return when you reinstall.......weird.
Cheers
Andy.

Problems with FlashPlayer Update.

Problems with FlashPlayer Update.
after download, install begins, but when the progress bar ends a typical Windows error message displays showing :
(literal translate from spanish):
" is not found the enter point of procedure SetDIIDirectoryW into the dinamic Links Library KERNELL32.dll "
ihave: windows32, XP + FlashPlayer Ver: 11.1.102.55 + MozilaFirefox10.0
flash works ok, but i can't complete a new update since Version: 11.1.102.55
please help me, Thanks

Microsoft Windows XP Professional Version 5.1.2600 Compilacion 2600
(looks like old windows98 / 2000 style but it's XP (i choose the old look in display preferences)
i think it's Service Pack 1 beacause there were problems with SP2 updates with some programs, so this version works Ok with all my software... until now. i Know there's a SP3 and it is an obsolate OS but i like it and works well in this PC.
Do you think that it's the problem? i must install SP3?

Problems with System Update 3.14.0019 after installation SP2

Have you encountered problems with System Update 3.14.0019 after installation SP2 for Windows Vista?
After this upgrade I view this error: "An error occurred while gathering user information."
Thanks for the help

A known issue. It wasn't supposed to be supported until SP2 is RTM. However, look at the stickied post in the forum for some bad news about SU.
x61s

Has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

fair enough. No need for any unnecessary posts either. You issue had been addressed ad nauseum already in this forum had you bothered to search this forum (as forum etiquette would dictate) before posting.
In any case, I hope that your problem was solved.

I am having problem with my sound, after i updated to ios 6, apple please help

i am having problem with my sound, after i updated to ios 6, i can hear music with headphone only, apple please help

Try going into your settings and 'reset all settings'
You will need to retweak your device but it's been said to help with sound issues.

Having problem with my camera after updating 8.1.3

having problem with my camera after updating 8.1.3.. how will you fix this

Try Resetting your phone: hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons. If this does not work Restore your iPhone in iTunes.

TS1559 i am have a problem with wi-fi after i update my system to IOS 7.1

i am have a problem with wi-fi after i update my system to IOS 7.1

And what would that problem entail?
Did you look at the link that you tagged?

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Tell Apple about it: http://www.apple.com/feedback/iphone.html
Be sure to give as much detail as possible.
I would also check LG's site.

HT204490 OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

I've been using it on all of my computer without any problems. Remember you won't see any positive comments here. Everyone here is complaining about a problem. If you want a good experience with any upgrade or update first make a backup from which you can boot the computer. If you are installing an update, like 10.10.3 for example, always download and install the Combo Updater - OS X Yosemite 10.10.3 Combo Update. Before you install any update or upgrade over an existing system you should do this:Repair the Hard Drive and Permissions:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu.

Problems with ITMS Videos after 1.1 Update

OK, so there are lots of posts about video problems on 5G ipods after software update 1.1 and what encoding methods were used etc etc.
After updating my 60GB iPod to 1.1 all my videos, including those purchased from the iTunes Music Store, suffer from audio problems.
The video playback is fine, no freezing like others have mentioned, but I get loud popping and clicking sounds on the audio, particulalry at the start of a clip.
Has ayone else experienced problems with video sound after the 1.1 update?
Restoring to software 1.0 resolved the problem so there is definitely a problem with 1.1 and ITMS content.
Apple need to sort this out. Fast.

I foolishly did the 1.1 upgrade to my 60G iPod. I found that, as we all know by now, that all ov my videos that weren't from Quicktime Pro or purchased through iTunes hang after about 30 seconds, and then continues without any audio. But, the really obnoxious part is that my videos that I converted via QuickTime Pro suffered from very strange audio artifacts. These would fall into the category of clicks, purrs, warbles and other strange noises in addition to the audio that is supposed to be there. That pushed me over the line, and I "downgraded" my iPod back to release 1.0. I did the "restore" to completely erase my iPod and then re-loaded it from iTunes. I had already upgraded iTunes, and it has no problems with my now-restored-to-version 1.0 iPod. By the way, you have to edit a system file in order to do the downgrade: Put the ipod in harddisk mode. Edit the file (hidden folder and file) \iPod_Control\Device\SysInfo Replace the line that have the word "buildID" with this line:
buildID: 0x05908000 (6.0)
Then run the original iPod Updater to put 1.0 back onto it. This will leave you with the "feature" that any video that you change the Video Kind to TV Show will not show up on your iPod unless it's in a Video Play List. I actually like this, as it keeps the Video list from being cluttered up.
Sony Vaio PCG-U1 Windows XP Pro

Dear i have a problem with the fingerprint after updating to ios 7.1 when plugged in electricity works like a charm

dear sirs.
i am an apple customer since first iphone but right now i am having problems with fingerprint sensor after updating to ios 7.1.
when plugged to electricity it works but when unplugged sometimes work.
please solve this issue by a quick update and thanks.

I have been on the phone twice today with my carrier. They reset it the first time, it worked for an hour then messed up again. They reset it a SECOND time.. It worked for 6 hours, then messed up again. I don't know if this is a software issue or what but if ANYONE has any insight, I would appreciate it greatly.

Facing network problem with iPhone 5s after updating it to iOS 7.1.2 .

Facing network problem with iPhone 5s after updating it to iOS 7.1.2 , using Vodafone in india. if at one place network is full then after few minutes at same place i get no network ? what can be done ?

Hi srikka,
I'm sorry to hear about the issues you've been having with the iOS 8 upgrade on your iPhone 5s; I know how frustrating that can be, especially on a device you use every day like a smartphone. If you continue to have issues with your WiFi and cellular data connections, you may find the troubleshooting steps outlined in the following articles helpful:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
iPhone cellular data connection issues - Apple Support
Regards,
- Brenden

Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
I can not believe that Apple did not test this for major bugs like this one is.
I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

Problems with EAXC_Theme_PCApp_LB_3_10_13 update after installat

Similar Messages

Maybe you are looking for