Problems with facebook and loading page in Safari

When I am chatting on facebook and try to click around on the page, most specifically when I have other tabs running on Safari, facebook will not completely load and i will get the spinning cursor on the facebook tab that will not go away. It continually tries to load with no success. I have to close the window and open a new one for it to go away. It only seems to happen when I am chatting with people on facebook chat...any suggestions?

Ok...
Time to get out your install disc, run the Disk Utility app and check the startup disk for errors.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your startup disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 15% free space.*

Similar Messages

  • Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Hi Hanjon!
    Here is an article that will help you troubleshoot these purchased apps:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Upload problems with Facebook and Vimeo from Premiere Elements 10

    I have created a project in HD and am trying to upload to Vimeo.  Premiere Elements 10 does not have a preset so I followed some instructions from the Vimeo website.  Project is "blurry" when viewed.  I checked with Vimeo and they said what they converted matches what I sent so the problem must be in the export - bit rate may be incorrect.  Can anyone give me the correct presets for Vimeo from Premiere Elements 10.  I can view other people's video in HD and they look fine so I don't think it's my computer monitor.   I'm sure you will need more information about my project so please give me a list of specific things you need to know.  Thank you.
    My Facebook problem is as follows.  If I use the preset from Premiere Elements 10 to upload to Facebook it looks fine, HD quality as expected.  Problem is, I would like to upload to my business page.  Since the personal page and the business page (managed by my personal account) share a login, the preset always loads to my personal page.  Does anyone know the values of the preset so I can upload the video to my business page.  My business is event and wedding videography so I would like the posts to be as clear as possible.
    If the problem with the Vimeo uploads is solved then I suppose I can just share the Vimeo file on Facebook.  Thank you.

    VDRAVES
    I think that you are overlooking what you already have with regard to a Vimeo HD preset for export to file for upload of the saved file at the Vimeo website.
    Please see
    Share/Computer/AVCHD with Presets = Vimeo HD
    Under the Advanced Button/Video Tab, you can customize the preset further from 1280 x 720 to 1920 x 1080 and increase the bitrate, if necessary, to a level that does not give you a prohibitive file size. With Profile = Main and Level = 3.1, the bitrate range is 0.19 to 14 Mbps (megabits per second).
    I would start with the default bitrates of Target = 8 Mbps and Maximium = 9 Mbps and explore and experiment from there.
    If you customize the preset to 1920 x 1080 in the Export Settings customization area, then change the Profile to High and the Level to 5.1
    When you do that the bitrate range will be 0.19 to 300 Mbps instead of 0.19 to 14 Mbps.
    In all cases, watch for file size versus bitrate versus quality of end product.
    Please give that a look and then let us know if the above resolves your Vimeo and Facebook question.
    Please review and let us know the outcome.
    Thank you.
    ATR

  • Problems with facebook and YouTube

    Okay, so I upgraded my MacBook pro (early 2011) to mountain lion, and everything worked fine, it was also faster than lion. The problem is that yesterday I had troubles with facebook, the tab where I was got blocked and since that moment I can't log in to facebook, YouTube and other sites in any browser, I've tried all of them. It happened while I was usin chrome but safari, Firefox, opera, they don't work unless I set the private browsing. I don't know what to do, please help me.

    I had ths problem to and found out how to fix this here are some steps to fix it.Type on your keyboard ctrl+shift+delete (hold control shift and delete at the same time) after you press these keys a pop-up will come up saying "Clear All histroy" at the top where it says "time range to clear" select Everything after that underneath Details at the bottom check all the boxes off the list then click "Clear Now" (I attached a picture to show what it should look like you can see the picture at the bottom of this post)the the problems should be cleared with youtube and facebook
    ***By the way firefox doesn't force you to update you don't have to update firefox if you don't want to***
    All the help from-
    Spencer4757
    I helped you, can you help me by visiting my websites and other sites:
    My Website: http://www.spenceriscool.co.cc/
    My Youtube channel: http://www.youtube.com/spencer4757
    Twitter Fan Page : http://twitter.com/#!/spencerizcool
    Facebook Fan Page : https://www.facebook.com/pages/Spencer-Is-Cool/120710047950205

  • Problems with Facebook and theater mode

    When a photo is clicked on Facebook, the theater mode appears normally but the original page scrolls up randomly. Is there a fix for this?

    Hannes.S wrote:
    Hi tjk,
    thank you for your reply.
    I will do that, if there is no other solution. I just thought, it'll be better to know what's the problem with my mac...
    But probably you're right, this will be the best solution.
    The repair techs would be the best person to ask that. 

  • I am having a problem with display and loading problem on my macbook pro.

    when i am trying to login into my user account on my macbook pro. it just starts loading but after that it doesnt display anything and keeps on loading for hours.Also when i logged into guest user it asked me to restart for the safari use only and after using that option i am just able to use safari with the displaying problems.please reply mw with an answer.

    Your post somehow found its way to a little-viewed forum for an obsolete Apple productivity program. I have asked the Hosts to move you to a more appropriate and active forum for your product where you can get help faster.

  • Problems with Facebook and graphics?

    About a week ago i notice the lag time in typing is terrible and i must wait for the keyboard to catch up with me.  Now, the pictures and other graphics interfaces on Facebook are all screwed up.  I click on a picture in someone's timeline and the photo just starts to blink.  Sometime a cover photo on a friends page just does wierd things and blinks or even moves into strange positons.  I do not know when the last update to the graphic chip was, but is anyone else having this problem?  Sometimes it happens on twitter, but i think that is about all.  I really dont see it on web sites.
    i have a 15 inch macbook pro, retina, 16 MB of ram, SSD bought last july.

    Contact Facebook & Twitter customer support to determine if the issue is on their end. 
    How large is your hard drive and how much hard drive space do you have left? If you have Apple Care or are still under your 90 days of free phone tech support, call them. 

  • Problems with filters and jsp pages.

    I have the following simple filter that checks if there is user information in the session object and redirects accordingly:
    import java.io.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    public class LoginFilter implements Filter
         public void init(FilterConfig filterConfig) {}
         public void destroy() {}
         public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain)
         throws IOException, ServletException
              System.out.println("filter");
              HttpSession session = ((HttpServletRequest)request).getSession();
              String action = request.getParameter("action");
              if(action != null && !action.equals("login") && !action.equals("wronglogin"))
                   if(session.getAttribute("username") == null)
                        ((HttpServletResponse)response).sendRedirect("index.jsp?action=wronglogin");
                        System.out.println("User not OK, kicking out...");
                   else
                        chain.doFilter(request, response);
                        System.out.println("User OK, letting in...");
              else
                   chain.doFilter(request, response);
    }The filter is mapped to an admin page with the name index.jsp. However, I get an error for every <% and %> tag in the file (there are quite a few) when I use the filter with the page. The page works fine without the filter, and the filter seems to work with pages without scriptlets (without the <% and %> tags). Here is the beginning of the error report:
    org.apache.jasper.JasperException: Unable to compile class for JSP
    An error occurred at line: 6 in the jsp file: /admin/index.jsp
    Generated servlet error:
    Syntax error on tokens, AnnotationName expected instead
    An error occurred at line: 6 in the jsp file: /admin/index.jsp
    Generated servlet error:
    Syntax error on tokens, delete these tokens
    An error occurred at line: 6 in the jsp file: /admin/index.jsp
    Generated servlet error:
    Syntax error on token ";", [ expected
    An error occurred at line: 6 in the jsp file: /admin/index.jsp
    Generated servlet error:
    Syntax error on token ";", [ expected
    An error occurred at line: 6 in the jsp file: /admin/index.jsp
    Generated servlet error:
    Syntax error on token ";", [ expected
    Jasper gives me many errors per <% and %> tag. As you can see there is a <% tag on line 6. Any idea, why this does not work?
    Thanks!
    Message was edited by:
    chincillya

    What is the JSP scriptlet code at line 6 ?
    By looking at the code we can identify if there are any syntax errors, otherwise we can't really guess what might be the problem.

  • Problem with facebook and candy crush

    The face book will not talk with candy crush what is needed to be done?

    Contact the app developers and ask them for help.
    This is not the Facebook or Candy Crush support forum.

  • Problems with saving and inserting pages

    I am using Adobe Acrobat X Standard.   After I write a report and PDF it, I always have to insert other information in the report.  This additional information is also been PDF.  Why is it that sometimes it will not let me save the file after I have inserted new pages?  It says the file is “read-only” but I saved the file a few minutes before.  I have to save my changes to a new file name.
    Other times, I am replacing pages, and it will not let me.  I might be able to insert the new page but it will not let me delete the old page.  It says the file is open by someone else.  I am on a single laptop that is not on a LAN.   When this happens I must save what I have and close the file.  When I reopen the file I can delete the old page.
    Is there something that should be checked or unchecked?

    What is the JSP scriptlet code at line 6 ?
    By looking at the code we can identify if there are any syntax errors, otherwise we can't really guess what might be the problem.

  • Safari 5.1.10 has problem with Facebook

    Hi.  I have a MacBook Pro 3.1 with OS X 10.6.8 and Safari 5.1.10, which I understand is the latest version for the Snow Leopard.  When I log into Facebook the blue "ribbon" at the top (with the chat, friend, logoff etc buttons) doesn't show UNLESS my cursor is above the Friends online column to the right.
    I have tried another user and the problem persists.  Other browsers are working fine so the problem is only related to Safari.
    I have already:
    1. Reset Safari
    2. Emptied cache
    3. Removed all cookies.
    4. Removed the Safari .plist files
    5. Removed the Safari cookies file
    Anybode else have this problem?  Anybody know how to fix it?
    Thanks

    I started experiencing the missing Facebook toolbar a week ago with a church Page I manage.  Other Facebook pages, including my News Feed were fine.
    Yesterday, Facebook's blue toolbar disappeared from my News Feed page and my Timeline page.  Surprisingly, Group pages still have the toolbar.
    I'm experiencing this problem with Safari 5.1.10 on Mac OS X 10.6.8.
    Safari 6.1 on OS X 10.8.5 has no problem with Facebook toolbars.
    -- Ward

  • Safari 3.0.4 problems with Facebook...

    I've never had problems with Facebook, until I recently updated to Safari 3.0.4...
    Now when a friend is added, I see them in my personal news feed initially, but when I go back to my profile page later on, those people have disappeared! It's the same for looking at photo's on a friends page, sometimes it lets me, and then a moment it boots me out! Friends are disappearing and then reappearing... very annoying.
    I've tried resetting Safari, but the problems persist. Any recommendations? How do I go back to the previous version of Safari... I don't want 3.0.4 until they work the bugs out.
    Thanks in advance.

    Safari 3 has a few different security settings, for example, blocking cookies from 3rd party sites. You might want to try disabling that protection and seeing if Facebook behaves normally again, since that's a big part of how Facebook does its business. Good luck.

  • Problem with Frameset and page session

    All,
    I am having a problem with Framesets and page session attributes. I
    have a client who's application uses a three frame frameset. They
    have a requirement on several pages that when a button is pushed two
    different pages load into the right and left frames. The way they
    are accomplishing this is that on the pages were this is required,
    they are adding target="_top" to the form declaration in their JSP.
    Then they store the page names they want to display in session,
    forward the request to the frameset, the frameset then determines
    which pages to display based on the session variables. This works
    exactly how they want it to.
    Here is our problem. We need to store some information in page
    session attributes. We have tried to get a handle to the desired
    view bean and call the setPageSessionAttribute method. However,
    since we are forwarding to the frame and the frame handles displaying
    the desired JSP, that view bean we had the handle to is not the one
    that is created to hand the display of the JSP.
    The next thing I tried was to use the request object. In the
    handleBtnRequest method, I set an attribute in the request object. I
    then query the request object in the beginDisplay event of the view
    bean. When the frame is reset the request object does not contain
    the attribute that I have set. I'm confused by this because I
    thought the request object would be available to me throughout the
    life of the request.
    Given the above information, does anyone have any suggestions? Also,
    am I going about this in the wrong manner.
    The client had been storing this information in user session, which
    seemed to work. However, since the data being stored dealt
    specifically with data for the requested page, we felt that storing
    it as page session was more appropriate.
    Thanks,

    The script on your page web page has some obvious bugs.. Best
    fix those
    first before looking to blame Flash.
    Jeckyl

  • Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

    Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/

    Have you moved Pages from its installed location? Or just dragged a copy to your current system?
    It can't find some of its resources apparently.
    Peter

  • Problems with Mail and Safari

    Hi,
    I'm running OS 10.11 and am having some consistent problems with Mail and Safari on my MacPro Dual 2.66. Here they are:
    Sometimes, for no apparent reason, selecting these applications from the dock no longer opens the application (or a new window if already opened), but causes them to be revealed in the finder.
    In Safari, when this problem occurs, another symptom seems to be that new windows will ONLY open in a new tab, even though I have preferences set to open links in a new window. If I click on a bookmark within a folder in the bookmark toolbar, Safari will open ALL the bookmarks in the folder in new tabs!!
    In Mail, when I open my Inbox, clicking on various messages will highlight (in blue) ALL the messages I'm clicking on, instead of simply displaying the highlighted message in the reader.
    The only way to get things back to normal is to reboot my machine, which is getting to be a total drag, especially since this seems to happen fairly often.
    One other thing that may be related- if my screen saver is running, and I move the mouse to go to an active screen, the computer will "freeze." It stays like this indefinitely- I figured out that if I press the button on the machine itself it will go to sleep, and I can wake it up and then everything is fine, but I don't understand what's going on.
    I have tried using Disk Utility and Disk Warrior, and have used OnyX to clean out my system cache and aall sorts of other stuff, but to no avail.
    Is anybody else experiencing any of this? I'm starting to get really frustrated. Thanks for any advice.
    Cheers,
    Andrew

    Scott,
    I had posted earlier that I had Flash payer problems and then QuickTime and PDF preview problems too, on my Intel PowerMac. I could not figure out what the problem was, because fixing permissions and moving plugins did not work. Console indicated that the Quicktime components were not found, with the problem in a webkit pref file somewhere (nil field value). Anyway, I bailed and reinstalled Leopard from a 10.5.0 DVD, and then updated using the combo updater to 10.5.3. Everything worked. Then, after the 'Java for Mac OSX 10.5 Update 1', it all broke again. This time, repairing permissions resulted in:
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Home/lib/jvm.cfg", should be 0, user is 95.
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/classlist" , should be 0, user is 95.
    Now it all works again. This is obviously a flaw with the Java update, and also somehow Disk Utility did not find it earlier. Anyway, take a look at reverting the Java update, or manually changing user for those files (I suppose user 0 is root, but maybe it is nobody).
    Obscure....

Maybe you are looking for

  • Difference between NULL and two single quotes

    Hi, Please advice me on the following. First let's do an update. update table_name set column_name =''; After updating why do following queries return different results? 1. select count(*) from table_name where column_name is null; 2. select count(*)

  • Is there a way of disguising faces in this program?

    I am making a video to advertise a Museum but need to mask children faces for security reasons - is there a way of doing this in FCP X?

  • Installing Windows 7 Professional 64 bit drivers för Canon MF8330 Cdn printer/fax/scanner

    Hi! After Windows update in april 2014 I cant any longer use the scanning funktion via network from Canon MF8330 Cdn multifunktion printer/fax/scanner machine! It worked fine Before the april Windows update installation. I have reinstalled with Canon

  • The registry for burning CDs is missing.

    I  have tried reinstalling iTunes and using a tutorial to manually enter registry, but neither worked. Is ther anything else I can try? I don't have the installation disk or a backup that has that registry key. Also, using Microsofts' Mr. Fix-it and

  • Connection to Oracle BI server using BRIO

    Hi, I read in the administrator manual that it's possible to connect to Oracle BI Server with third-party tools over ODBC. The instructions say to configure a DSN on the remote machine using the Oracle BI Server driver. Does this mean that I need to