Problems with files opened in Photoshop from Lightroom

Hi,
I started editing a large number of files recently and came upon strange problems when sending files to Photoshop from Lightroom:
1. Sometimes, all edits will be transferred to Photoshop except for the Lens Profile Correction. I tried clearing all changes and starting again, and it didn't work. However, if Lens Profile Correction is the ONLY change I make in Lightroom, it is correctly shown when the file is opened in Photoshop. [EDIT: I thought it was only the Lens Profile Correction, but with some files it appears other edits are disappearing too, such as cropping.]
2. Sometimes, and I can't seem to find any pattern for this, files I sent to Photoshop will open as only "slices" of images. In fact, there is only one sliver of the image that gets opened. Sometimes it is a vertical line, sometimes a horizontal line, usually about 1/20 as thick as it is long. For that problem, I haven't found a solution yet.
I am using the latest versions of Lightroom, Photoshop and Camera Raw, with RAW files created with a Nikon D7000 camera, on an iMac from 2011. I have no software or hardware problems apart from this.
Here's hoping someone can help.
Thanks!

Fireworks doesn't save or export in Quicktime format.

Similar Messages

  • Problem with image opened in Photoshop

    Hi all,
    I am having a strange problem with an image opened from Aperture in Photoshop. Though the image looks fine, something is amiss. Most notably when I try to use the shadow/highlight command in Photoshop, the image actually darkens (highlights are set to zero amount). If I export the image as a jpeg and open it in Photoshop, the s/h command works as expected. If I export as a .psd file and open it, the s/h command again darkens the image. Interestingly, the .psd file thumbnail shows orange with read streaks through it, but opens as it should. Corrupted .psd conversion maybe?
    Any thoughts or suggestions would be appreciated.
    Thanks,
    Steve

    Additional info:
    Same problem with a series of photos taken about the same time.
    Other photos work fine.
    I exported the original .nef file, opened it in camera raw/photoshop. Works fine.
    Corruption/bug in the .psd conversion looks more likely unless I'm missing something. . . .
    Help!!!

  • Problems with "File Open" and "File Save As" in Tiger

    I recently upgraded to OS10.4.3 on my PowerBook G4 and ever since I have had only frustration upon frustration with this new version.
    When launching a program whether it be QuarkXpress 6.5, Illustrator CS, Photoshop CS, InDesign CS or Acrobat 6.0 and you go "File Open", it can take up to 3 minutes before the "Open" window dialog box will appear so that you can access your files. The same applies to the first "File Save As" in any of these programs. After that everything works normally.
    Has anyone experienced this problem with Tiger and is there a solution? I should be most grateful for any assistance.
    Leon
    PowerBook G4   Mac OS X (10.4.3)  

    I got so frustrated with iDisk that I did indeed turn mine off altogether. Now I just mount it when I need it, and do whatever I want to do manually. And it is STILL annoyingly slow, not only in its own operations, but in the way it hijacks the Finder and can sometimes bring all Finder operations to a grinding halt.
    I keep a local copy of the all the files I have on my iDisk in a perfectly normal folder. And I keep looking forward to the day when the promised seamless operation of my local files and iDisk will actually work.
    I've been waiting for several years and thru several different incarnations of the OS, and it ain't there yet. I think Apple's version of WebDAV is just really really bad. I've heard other WebDAV servers work better. And I figured it was a bad sign when, back in Panther, one of Apple's own helpers recommended a third party WebDAV software (Goliath) to access the servers rather than using the Finder. I didn't think things could get any worse--until Tiger came along. A bad situation can get worse, and it did.
    Maybe when Leopard gets here.....
    Francine
    Schwieder

  • Problem With File Crashing in Photoshop CS5

    Hello I have a design file that  I just created in Photoshop CS5 last night. I went in to do some editing today and it keeps craahing within a few seconds of being opened. I have never had this problem with a file before and I need it to turn in at work.  ANy helpful ideas out there on what may be happening? It's happened at least twenty times now....

    If you do a search, you will find several threads dealing with file corruption in CS5/ CS5.1. The long and short of it is, that the file is a goner, but feel free to try things like opening it in another program (Art Rage, Corel Painter, GIMP) or image viewer (XnView, ACDSee) to recover at least parts of it...
    Mylenium

  • Problem with images opened in Photoshop CS 5

    Hi, I have a problem with images that I open in Photoshop CS 5. F. ex. I opened
    the following image:
    The image appears with a purple color in Photoshop. If I hover over the image
    with a tool like lasso, it temporarily regains it´s original color. The image mode is RGB Color, 8 Bits/Channel.
    I resetted the start settings of Photoshop with the CTRL-Shift-Alt-combination, which had no effect.

    The confusion arises from the imprecise error message in the Preferences > Performance dialog box, to wit:
    OK, that seems to be open to misunderstanding indeed.
    The video card: Citrix Systems Inc. Display Driver.
    Could not find a list for CS6 specifically, but the card may fall short.
    http://helpx.adobe.com/photoshop/kb/tested-video-cards-photoshop-cs5.html
    If I invoke View > Proof Colors, the only thing that changes is that the text in the brackets
    Also if you set View > Proof Setup to something different?
    Boilerplate-text:
    Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

  • Having problem with washed out prints only from Lightroom 5

    Hi,
    I have just gone over the Lightroom 5 and printing to an Epson Pro 3800. Background:
    Fuly colour manage screen
    Use Windows 7 64 bit
    Using latest drivers
    Only problem when printing from Lightroom 5, not PS CS5 or Nikon Capture NX2
    Same result whether print via LR5 (with printer CM turned off) or via Printer CM (with LR5 turned off)
    I cannot see any obvious issues or problems, so would be great if someone could assist!
    Thanks
    Krytten

    Now sorted - had to reinstall the drivers. Never had this before...

  • Problem with File Open Dialog box

    Gurus,
    I am using Forms 10g with Windows environment .. My requirement is, to display File Open Dialog Box, and whatever file I am selecting it has to open .. I am able to get Dialog box, problem is, when I select a file (for example, test.txt), I cant see the file getting opened .. Can anyone suggest me how to get the desired result ...
    Pasting my code below
    declare
         a varchar2(100);
    begin
         a := WEBUTIL_FILE.FILE_SELECTION_DIALOG('c:\temp','','*.*','c:\temp',OPEN_FILE, TRUE);
    end;
    Regards

    You can see the code in the webutil.pll library.
    FUNCTION CLIENT_GET_FILE_NAME (directory_name Varchar2 := NULL,
                                   file_name      Varchar2 := NULL,
                                   file_filter    Varchar2 := NULL,
                                   message        Varchar2 := NULL,
                                   dialog_type    Number   := OPEN_FILE,
                                   select_file    Boolean  := TRUE) return Varchar2 is                             
    * CLIENT_GET_FILE_NAME
    *   Client (Browser) side implementation of the standard GET_FILE_NAME Built-in
    *   Used to display File Open, Save  and directory listing dialogs
    *   Implemented using calls to WEBUTIL_FILE
    * Version 1.0.0
    * Change History
    *   1.0.0 DRMILLS 23/DEC/2002 - Creation
    \*********************************************************************************/ Here is one example:
    the_file := client_get_file_name('c:/', null, 'All Files (*.*)|*.*|',null,open_file,true);Francois

  • Problem with file opening and error message

    Hi there,
    In CP 7, I am having a problem opening a file adn was wondering if anyone else has had this and whether the file was recoverd effectively or at all...
    See message below
    Cheers
    Rossdo

    Are you trying to open a CP8 file in CP7? If you are facing the problem with CP7 file itself, first thing you need to do is check whether you got any .lck file (lock file) in the source file folder, which indicates that the file was opened and not closed properly.
    If not, try the method here:
    Recovering the project « Rapid eLearning | Adobe Captivate Blog
    Sreekanth

  • Problem with file association in Photoshop

    I am using Adobe Photoshop CS4, and I also have Adobe After Effects on my computer (which I don't use).  For some reason, when I click on a photograph in Adobe Bridge, the After Effects program opens, but the photo I want to open in Photoshop does not open.  I have reset the file associations in Photoshop, but Bridge ignores the settings and will only open After Effects.  How can I prevent this and return to having Photoshop open my photographs?
    Thank you for your help.

    Might try posting in the Bridge forum.
    If you're runign a Macinotsh, you an trash the bridge.plist but that's not always a good idea so don't do that till you know there's no better answer.

  • Problem with files: open with applications

    Hi to all!
    I have this problem:
    I have a little application in java and I make a button... when i press this button I wanna that the file named "example.pdf" will be opened with "pdf preferred application in OS" (for example in Windows xp , Acrobat 8)
    Can anyone help me?
    thanks!
    tommaso

    Set your default apps the way you want them.
    Navigate to ~/Library/Preferences/ and make sure the file com.apple.LaunchServices.plist is present and has a creation or modification date/time that matches the time when you set your last default application.
    Reboot.
    Navigate back to ~/Library/Preferences/ and make sure com.apple.LaunchServices.plist is still there and does not have any permissions issues.

  • Problems with file permissions (read only) from Migration Assistant

    So, I just got a new computer (Mac Pro / Leopard) and I used the Migration Assistant to bring in all of my information from my old Powerbook running Tiger. Once that was done I had two accounts: my old admin account (with all of my settings) and my new admin account (the default). I deleted the new admin account because I had no intent to use it any longer, and planned to continue using the old one.
    But since then, I have been having some permissions issues. Pretty much all of my files are Read Only, so I have to set the permissions on them one-by-one as I need to write them. This also prevented me from doing the 10.5.2 update in Software Update (I was able to get it manually from apple.com.
    I need to know if there's any way to fix this. I tried restoring from the discs, but that didn't affect anything. I've tried repairing permissions, and while that may have helped with some system folders, it doesn't help with the rest of the hundreds of files that I'm sure I'll need to "unlock" in the future.
    Please help!

    Repairing permissions won't fix this. Repair permissions can only work on system files and other files which have a bill of materials (BOM) receipt in /Library/Receipts.
    You need to change the ownership of the files. This is very easy to do with terminal if you know what you're doing:
    sudo chown -R username:staff
    where username is your short username (e.g. mine is blloyd).

  • When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm usi

    When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm using a Mac with Mountain Lion OS.  Any solutions?

    Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
    LN

  • When I open an image in Photoshop from Lightroom it does not show any adjustments, without restarting photoshop between each picture.

    I am using Macbook Pro, Photoshop CC, and Lightroom 5.
    The problem is: When I start edit in photoshop from Lightroom, the adjustment in Lightroom does not showing up in Photoshop. This has never been happen before while using Photoshop 6.
    I have tried to reinstall the products several times, including OS Yosemite. But it does not help.

    The problem with write permissions for the OneDrive folder only shows up in Lightroom 6's export dialogue, that's why it's to irritating. Lightroom 5.7.1 is not having that problem nor does the file explorer. The problem also exists on both of my machines. I will try to check for other problems with the OneDrive troubleshooter though: Running the OneDrive troubleshooter - Windows Help   

  • Unable to download from AppStore, updates,etc.Messages 'the installer is damaged' to 'there might be a problem with file ownership and permissions.' I am the owner and only user of a new MBP. What could be going on?

    Is anyone having the same type of problems I'm having with Lion. I have a new MacBook Pro, received 7 weeks ago, preinstalled with Leopard 10.6.7. I didn't migrate anything from my old iMac, wanted a clean install from the Apple Store. While there, I asked for the upgrade to Lion 10.7, however their system was down.
    I  installed it myself, wirelessly about a week later, and Apple emailed me a receipt. Now, I've had to call support directly last week when I lost Mail, Address Book, was unable to open Preview or iTunes, among other problems. Seemed fixed after a session that baffled even the store tech.  Now I am unable to download or install the recent Mac updates for Lion, from the App Store, could not install Adobe Reader, etc. Messages range from 'A network error has occured - Check your Internet connection and try again' to 'The Installer is damaged and cannot open the package. There may be a problem with file ownership or permissions.'  All fail and I'll probably have to call Apple again. I am frustrated beyond words.  Logs 'Install's runner tool is not properly configured as a setuid tool', domain errors, 'attempt to write a readonly database, and on and on. I have barely done a thing on this computer except search online for help with these problems. Safari gives me a 'You are not connected to the internet' too often. Diagnostics disagrees. I do see wi-fi problems in the forum. Disk and permissions were fine at the beginning of the earlier problems, checked first by support tech. I'm not sure if support tech even knew. I was just happy they were fixed. Anyone have these download and/or install problems after a 'clean bill of health' so to speak, only a week ago?

    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Why am I not able to export NEF files to Photoshop from Lightroom to edit. This is new. When I right click on an image, the export to PS option is not selectable.

    Why am I not able to export NEF files to Photoshop from Lightroom to edit. This is new. When I right click on an image, the export to PS option is not selectable. I've never had this happen before. I haven't used it for a few weeks, so maybe there's an update (Mac or otherwise) that's screwing things up? HELP!

    I have an Edit In - Photoshop option, but not an Export - Photoshop option.
    Obviously to have right-click Edit In to work, the photo you're right-clicking on needs to be selected.  I assume this is not the problem, and that the photo is selected.
    Mavericks 10.9.3 has a problem where the Users folder is hidden, and you need to update iTunes to fix it, but it's been a few weeks since this happened so hopefully you're up-to-date and the Users folder isn't hidden anymore.
    If you can't get things to work, I'd uninstall LR and uninstall Photoshop, then install Photoshop, and update it, then install LR and update it, as a way to get any wayward security or other OS-level things reset.

Maybe you are looking for