Problems with G6 - PT API and Content Service Upload Installation

Hi all,
What port number is PT API using in G6? Examples in Installation Guide are using 11905for PT API, is that the right port or just a dummy port? Same question for Content Service Upload, is port 11910dummy?
I installed all Plumtree Foundation Components in one box as a Test. Followed every single instruction in the installation guide and the installation went successfully. Installation logs have no errors at all. Run diagnostic.bat test and it went successfully. All Plumtree services started successfully.
But the installation didn't create a "ptapi" virtual directory in IIS, hence the verifying installation (following instruction in installation guide page 4-25) step failed. PTSpy captured an error message (please see my reply coz the collab message can't exceed 16K chars).
Verifying Content Upload Service also failed (Tried to upload a simple document to a KD folder, error occured and upload was unsuccessful). PTSpy captured some error messages (please see my reply coz the collab message can't exceed 16K chars).
Can someone give me a hint ? Has anyone experienced these problems too???
Regards,
JS

Content Service Upload Error
406 portal.saptg6.Administrator 2-9-2006 16:12:10.296 Error Portal_Browsing .NET #37 com.plumtree.portalpages.browsing.directory.DirRepostControl DirRepost::PerformAction The following error occured when trying to submit a card: Error in function PTDataSource.ImportDocument (vDocumentLocationBagAsXML == '<?xml version="1.0" encoding="ucs-2"?><PTBAG V="1.1" xml:space="preserve"><I N="PTC_PBAGFORMAT">2002</I><S N="PTC_UNIQUE">http://www.copyright.gov/legislation/dmca.pdf</S><I N="PTC_DTM_SECT">1001</I><S N="PTC_DOC_ID">application/pdf</S></PTBAG>', lDocumentTypeID == 103, pCard == com.plumtree.server.impl.directory.PTCard, bSummarize == true, pProvider == ): Error in function PTDataSource.ImportDocument (vDocumentLocationBagAsXML == <?xml version="1.0" encoding="ucs-2"?><PTBAG V="1.1" xml:space="preserve"><I N="PTC_PBAGFORMAT">2002</I><S N="PTC_UNIQUE">http://www.copyright.gov/legislation/dmca.pdf</S><I N="PTC_DTM_SECT">1001</I><S N="PTC_DOC_ID">application/pdf</S></PTBAG>, lDocumentTypeID == 103, pCard == com.plumtree.server.impl.directory.PTCard, bSummarize == true, pProvider == ): Error in function PTFileAccessorBase.AttachToDocument (pBagDocumentLocation == <?xml version="1.0" encoding="ucs-2"?><PTBAG V="1.1" xml:space="preserve"><I N="PTC_PBAGFORMAT">4000</I><S N="PTC_FILE">C:\Program Files\plumtree\ptportal\6.0\tmp\tmp\{73B926FC-52D7-4675-B0EA-BBFC610A8253}~~~1139465529921.pdf</S><S N="PTC_WEB_URL">http://www.copyright.gov/legislation/dmca.pdf</S><S N="PTC_WEB_CT">Windows-1252</S></PTBAG>, pSession == com.plumtree.server.impl.core.PTSession): Year must be a positive numbercom.plumtree.openfoundation.util.XPIllegalArgumentException: Error in function PTDataSource.ImportDocument (vDocumentLocationBagAsXML == '<?xml version="1.0" encoding="ucs-2"?><PTBAG V="1.1" xml:space="preserve"><I N="PTC_PBAGFORMAT">2002</I><S N="PTC_UNIQUE">http://www.copyright.gov/legislation/dmca.pdf</S><I N="PTC_DTM_SECT">1001</I><S N="PTC_DOC_ID">application/pdf</S></PTBAG>', lDocumentTypeID == 103, pCard == com.plumtree.server.impl.directory.PTCard, bSummarize == true, pProvider == ): Error in function PTDataSource.ImportDocument (vDocumentLocationBagAsXML == <?xml version="1.0" encoding="ucs-2"?><PTBAG V="1.1" xml:space="preserve"><I N="PTC_PBAGFORMAT">2002</I><S N="PTC_UNIQUE">http://www.copyright.gov/legislation/dmca.pdf</S><I N="PTC_DTM_SECT">1001</I><S N="PTC_DOC_ID">application/pdf</S></PTBAG>, lDocumentTypeID == 103, pCard == com.plumtree.server.impl.directory.PTCard, bSummarize == true, pProvider == ): Error in function PTFileAccessorBase.AttachToDocument (pBagDocumentLocation == <?xml version="1.0" encoding="ucs-2"?><PTBAG V="1.1" xml:space="preserve"><I N="PTC_PBAGFORMAT">4000</I><S N="PTC_FILE">C:\Program Files\plumtree\ptportal\6.0\tmp\tmp\{73B926FC-52D7-4675-B0EA-BBFC610A8253}~~~1139465529921.pdf</S><S N="PTC_WEB_URL">http://www.copyright.gov/legislation/dmca.pdf</S><S N="PTC_WEB_CT">Windows-1252</S></PTBAG>, pSession == com.plumtree.server.impl.core.PTSession): Year must be a positive numbercom.plumtree.openfoundation.util.XPIllegalArgumentException: Error in function PTDataSource.ImportDocument (vDocumentLocationBagAsXML == '<?xml version="1.0" encoding="ucs-2"?><PTBAG V="1.1" xml:space="preserve"><I N="PTC_PBAGFORMAT">2002</I><S N="PTC_UNIQUE">http://www.copyright.gov/legislation/dmca.pdf</S><I N="PTC_DTM_SECT">1001</I><S N="PTC_DOC_ID">application/pdf</S></PTBAG>', lDocumentTypeID == 103, pCard == com.plumtree.server.impl.directory.PTCard, bSummarize == true, pProvider == ): Error in function PTDataSource.ImportDocument (vDocumentLocationBagAsXML == <?xml version="1.0" encoding="ucs-2"?><PTBAG V="1.1" xml:space="preserve"><I N="PTC_PBAGFORMAT">2002</I><S N="PTC_UNIQUE">http://www.copyright.gov/legislation/dmca.pdf</S><I N="PTC_DTM_SECT">1001</I><S N="PTC_DOC_ID">application/pdf</S></PTBAG>, lDocumentTypeID == 103, pCard == com.plumtree.server.impl.directory.PTCard, bSummarize == true, pProvider == ): Error in function PTFileAccessorBase.AttachToDocument (pBagDocumentLocation == <?xml version="1.0" encoding="ucs-2"?><PTBAG V="1.1" xml:space="preserve"><I N="PTC_PBAGFORMAT">4000</I><S N="PTC_FILE">C:\Program Files\plumtree\ptportal\6.0\tmp\tmp\{73B926FC-52D7-4675-B0EA-BBFC610A8253}~~~1139465529921.pdf</S><S N="PTC_WEB_URL">http://www.copyright.gov/legislation/dmca.pdf</S><S N="PTC_WEB_CT">Windows-1252</S></PTBAG>, pSession == com.plumtree.server.impl.core.PTSession): Year must be a positive number at com.plumtree.openfoundation.util.XPException.GetInstance(String strErrorMsg, Exception e) at com.plumtree.server.impl.directory.PTDataSource.ImportDocument(String vDocumentLocationBagAsXML, Int32 lDocumentTypeID, IPTCard pCard, Boolean bSummarize, IPTDataSourceProvider pProvider) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\directory\PTDataSource.cs:line 465 at com.plumtree.portalpages.browsing.directory.DirModel.SubmitCardWithPropertyBag(Int32[] arFolderIDs, String strLanguage, Int32 nDocTypeID, Int32 nDataSourceID, IXPPropertyBag pbagCardProp, String strCardName, String strCardDescription) in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\directory\DirModel.cs:line 3290 at com.plumtree.portalpages.browsing.directory.DirModel.SubmitCardWithPropertyBag(Int32 nDataSourceID, String strCardName, String strCardDescription, IXPPropertyBag pbagCardProp) in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\directory\DirModel.cs:line 3205 at com.plumtree.portalpages.browsing.directory.DirModel.SubmitCard() in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\directory\DirModel.cs:line 3051 at com.plumtree.portalpages.browsing.directory.DirRepostControl.PerformAction(Int32 nAction) in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\directory\DirRepostControl.cs:line 626   at com.plumtree.uiinfrastructure.form.RepostControl.CheckActionSecurityAndExecute(XPHashtable arguments) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\form\RepostControl.cs:line 184   at com.plumtree.portalpages.browsing.directory.DirRepostControl.CheckActionSecurityAndExecute(XPHashtable arguments) in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\directory\DirRepostControl.cs:line 312   at com.plumtree.uiinfrastructure.interpreter.MVCController.HandleRedirect(Redirect redirect, RequestData tempData) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\MVCController.cs:line 385   at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 387   at com.plumtree.uiinfrastructure.interpreter.Interpreter.DoService(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 167   at com.plumtree.uiinfrastructure.web.XPPage.Service(HttpRequest httpRequest, HttpResponse httpResponse, HttpSessionState httpSession, HttpApplicationState httpApplication) in e:\buildroot\Release\httpmemorymanagement\2.0.x\dotNET\src\com\plumtree\uiinfrastructure\web\XPPage.cs:line 82   at com.plumtree.portaluiinfrastructure.activityspace.PlumHandler.ProcessRequest(HttpContext context) in e:\buildroot\Release\portalui\6.0.x\ptwebui\portal\dotnet\prod\src\web\PlumHandler.cs:line 37   at System.Web.CallHandlerExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute()   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)   at System.Web.HttpApplication.ResumeSteps(Exception error)   at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)   at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)   at System.Web.HttpRuntime.ProcessRequest(HttpWorkerRequest wr)   at System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)Caused by: com.plumtree.openfoundation.util.XPIllegalArgumentException: Error in function PTDataSource.ImportDocument (vDocumentLocationBagAsXML == <?xml version="1.0" encoding="ucs-2"?><PTBAG V="1.1" xml:space="preserve"><I N="PTCPBAGFORMAT">2002</I><S N="PTC_UNIQUE">http://www.copyright.gov/legislation/dmca.pdf</S><I N="PTC_DTM_SECT">1001</I><S N="PTC_DOC_ID">application/pdf</S></PTBAG>, lDocumentTypeID == 103, pCard == com.plumtree.server.impl.directory.PTCard, bSummarize == true, pProvider == ): Error in function PTFileAccessorBase.AttachToDocument (pBagDocumentLocation == <?xml version="1.0" encoding="ucs-2"?><PTBAG V="1.1" xml:space="preserve"><I N="PTC_PBAGFORMAT">4000</I><S N="PTC_FILE">C:\Program Files\plumtree\ptportal\6.0\tmp\tmp\{73B926FC-52D7-4675-B0EA-BBFC610A8253}~~~1139465529921.pdf</S><S N="PTC_WEB_URL">http://www.copyright.gov/legislation/dmca.pdf</S><S N="PTC_WEB_CT">Windows-1252</S></PTBAG>, pSession == com.plumtree.server.impl.core.PTSession): Year must be a positive number at com.plumtree.openfoundation.util.XPException.GetInstance(String strErrorMsg, Exception e) at com.plumtree.server.impl.directory.PTDataSource.ImportDocument(IXPPropertyBag vDocumentLocationBagAsXML, Int32 lDocumentTypeID, IPTCard pCard, Boolean bSummarize, IPTDataSourceProvider pProvider) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\directory\PTDataSource.cs:line 446 at com.plumtree.server.impl.directory.PTDataSource.ImportDocument(String vDocumentLocationBagAsXML, Int32 lDocumentTypeID, IPTCard pCard, Boolean bSummarize, IPTDataSourceProvider pProvider) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\directory\PTDataSource.cs:line 456 ... 18 moreCaused by: com.plumtree.openfoundation.util.XPIllegalArgumentException: Error in function PTFileAccessorBase.AttachToDocument (pBagDocumentLocation == <?xml version="1.0" encoding="ucs-2"?><PTBAG V="1.1" xml:space="preserve"><I N="PTC_PBAGFORMAT">4000</I><S N="PTC_FILE">C:\Program Files\plumtree\ptportal\6.0\tmp\tmp\{73B926FC-52D7-4675-B0EA-BBFC610A8253}~~~1139465529921.pdf</S><S N="PTC_WEB_URL">http://www.copyright.gov/legislation/dmca.pdf</S><S N="PTC_WEB_CT">Windows-1252</S></PTBAG>, pSession == com.plumtree.server.impl.core.PTSession): Year must be a positive number at com.plumtree.openfoundation.util.XPException.GetInstance(String strErrorMsg, Exception e) at com.plumtree.server.impl.directory.accessors.PTFileAccessorBase.AttachToDocument(IXPPropertyBag pBagDocumentLocation, IPTSession pSession) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\directory\accessors\PTFileAccessorBase.cs:line 130 at com.plumtree.server.impl.directory.providers.PTWebProvider.AttachToDocument(IXPPropertyBag spIPBagDocumentLocation, String AccessorID) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\directory\providers\PTWebProvider.cs:line 183 at com.plumtree.server.impl.directory.PTDataSource.InternalImportDocument(IXPPropertyBag vDocumentLocationBagAsXML, Int32 lDocumentTypeID, IPTCard pCard, Boolean bSummarize, IPTDataSourceProvider pProvider, IPTDocumentType spDocumentType) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\directory\PTDataSource.cs:line 1494 at com.plumtree.server.impl.directory.PTDataSource.ImportDocument(IXPPropertyBag vDocumentLocationBagAsXML, Int32 lDocumentTypeID, IPTCard pCard, Boolean bSummarize, IPTDataSourceProvider pProvider) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\directory\PTDataSource.cs:line 436 ... 19 moreCaused by: com.plumtree.openfoundation.util.XPIllegalArgumentException: Year must be a positive number at com.plumtree.openfoundation.util.XPCalendar.ValidateYearRange(Int32 year) at com.plumtree.openfoundation.util.XPCalendar..ctor(Int32 year, Int32 month, Int32 day, Int32 hour, Int32 minute, Int32 second) at com.plumtree.openfoundation.util.XPCalendar.GetInstance(Int32 year, Int32 month, Int32 day, Int32 hour, Int32 minute, Int32 second) at com.plumtree.server.impl.directory.accessors.PTPDFAccessor.convertStringToDate(String val) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\directory\accessors\PTPDFAccessor.cs:line 643 at com.plumtree.server.impl.directory.accessors.PTPDFAccessor.assignPropertyValue(Int32 iRow, Object key, OpenSearchFileProperty prop) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\directory\accessors\PTPDFAccessor.cs:line 363 at com.plumtree.server.impl.directory.accessors.PTPDFAccessor.ReadPDFFieldsFromDoc() in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\directory\accessors\PTPDFAccessor.cs:line 292 at com.plumtree.server.impl.directory.accessors.PTPDFAccessor.CheckDocumentValidity() in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\directory\accessors\PTPDFAccessor.cs:line 40 at com.plumtree.server.impl.directory.accessors.PTFileAccessorBase.AttachToDocument(IXPPropertyBag pBagDocumentLocation, IPTSession pSession) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\directory\accessors\PTFileAccessorBase.cs:line 113 ... 22 more

Similar Messages

  • Problems with Internetstick CS-10 and "Data Servic...

    Hi,
    I have problems with my USB-Stick CS-10 with MultiSim-Card. MultiSim supports simultanious opereation, when Stick is connected to the PC/Notbook an outgoing call from my mobile is possible an incoming is rejected after the first dialtone. I found in the www some hints to change the mode with at-commands in hyperterminal, I can connect the stick with hyperterminal and for example the command to check the manufactor "ati" is working and sending an "at" is answered by "OK". But the commands like "enter at_odo?" to check the status and the others to change the status are not working for the cs-10. Have you some hints to solve the problem.
    Thanks in advance
    yours Hans

    HI,
    we have seen that there might be some issue with MultiSim and working on that issue.
    In meantime you might check with
    AT%ICSCALL=1,0 command. IN most cases this worked
    Br, Oliver

  • Problem with signed SAML assertion and Web Services Manager

    Folks,
    I’m having some issues trying to generate a proper signed SAML assertion using JDeveloper 10.1.3. I am securing a java proxy class using the wizard as described in http://www.oracle.com/technology/products/jdev/howtos/1013/wssecure/10gwssecurity_howto.html .
    On the OWSM side, I have a service that I am securing with SAML - Verify WSS 1.0 Token. If I set the "Allow signed assertions only" property to false I can complete the service call. However, when it is set to true I am receiving the following fault: javax.xml.rpc.soap.SOAPFaultException: SAML token verification failed.
    When I examine the message going to OWSM in a packet analyzer, it is missing the signature in the SAML assertion. The <saml:Assertion> tags looks like:
          <saml:Assertion MajorVersion="1" MinorVersion="1"
                          xmlns="urn:oasis:names:tc:SAML:1.0:assertion"
                          xmlns:saml="urn:oasis:names:tc:SAML:1.0:assertion"
                          AssertionID="yM0oqZgF0N1a1td6yzKgOQ22"
                          IssueInstant="2007-01-23T17:15:27Z"
                          Issuer="HealthMarkets_s3">
            <saml:Conditions NotBefore="2007-01-23T17:15:27Z"
                             NotOnOrAfter="2007-01-24T17:15:27Z"/>
            <saml:AuthenticationStatement AuthenticationInstant="2007-01-23T17:15:27Z"
                                          AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">
              <saml:Subject>
                <saml:NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified">client_s3</saml:NameIdentifier>
                <saml:SubjectConfirmation>
                  <saml:ConfirmationMethod>urn:oasis:names:tc:SAML:1.0:cm:sender-vouches</saml:ConfirmationMethod>
                </saml:SubjectConfirmation>
              </saml:Subject>
            </saml:AuthenticationStatement>
          </saml:AssertionI have selected the Sign Outbound Messages in step 3 of the Secure Web Proxy Wizard. This step uses the DSA-SHA1 algorithm.
    Any help is greatly appreciated.
    Thanks in advance,
    Joseph

    Thanks for the response. I am not using any pages for this application yet... just calling the web service from SOAP UI or any Web Service testing tool causes the problem.
    All that has to be done to replicate it is to build a simple EJB 3.0 JPA bean using the entities from tables wizard and then add named query as follows:
    @NamedQuery(name = "BomHeader.findByDesc", query = "select o from BomHeader o where o.bomDesc like :p_bomDesc")
    then build a session bean with the wizard that includes the JPA persistence unit and the entity and subsequently use the wizard to wrap the session bean in a web service.
    The whole replication process should take 5 minutes if you have some database tables to work with. It breaks when the web service is called.
    Thanks in advance

  • I have a problem with my iPhone 4s. Location Services is turned on, but off in applications and I can not change it. It's just marked in gray. What should I do?

    I have a problem with my iPhone 4s. Location Services is turned on, but off in applications and I can not change it. It's just marked in gray. What should I do?

    No - restrictions are not on...
    and  under privacy>location Services - just like before - I can´t change it here

  • I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

    I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

    So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct?  Where do you look, or what do you do, that indicates the playlists are in alphabetical order?  Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
    If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe. 
    The 3rd gen shuffle uses VoiceOver.  If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details).  When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
    There are more details in the manual for the 3rd gen shuffle, which is online here
    http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
    See page 22 for the section about setting up and using VoiceOver.  The part about switching playlists starts on page 23 (Using the Playlist Menu).

  • Problems with the home button and generally freezing and shutting down often.

    I have had this iPad 2 for around 3 months. After about a month I noticed that I was having to press the home button multiple times in order to get it to respond. It is now at a stage where I have to press it as many as 12-13 times. It's won't do this every time but all day for maybe 3 out of 5 days the other times it works fine.
    As well as this I have also had issues with the Internet shutting down, Skype going crazy, picture albums popping up and then vanishing and so on. I'm not a computer wiz but I would describe it as going crazy two or three times a day.
    While I was in a shopping centre about a week ago I asked about the problems in an apple store. The man was very helpful and asked if I had it on me so he could look at it. Unfortunately I didn't be he said I could bring it back whenever I like and it would take around 30 mins for someone to check it out. He said most Likley they would just give me a new one and that would be that. So of course happy that it could be sorted I went home. Today I decided to drive the nearly two hours down to Brisbane after having a nightmare time trying to Skype my friend this morrning. I hot to the store and asked if it could be looked at only to be told I need an appointment. I showed the card that I had been given and explained what I had being told. To cut a long story short he agreed that I had been told that but said the assistant clearly didn't know what he was on about and that I should come back. I offered to wait but dispute the shop being more full of staff watching movies and downloading songs then actual customers I was basically denied any sort of help and told to call the office to arrange an appointment.
    Sorry to rant! I just thought that apple were renowned for good service? 5 hours later I'm home with the same issues.
    If anyone has had similar problem with the device or even customer service I would be intrested.
    Regards,

    Me too!  I had many bugs and returned my phone for a brand new one that did this the first time it was turned on at the Apple store.  I was told it is a "software issue" and to "reboot the phone" if it continued to happen.  It happens almost every time I try to use my phone.  I've rebooted three times in a row some days.  Nothing really seems to help.  I keep waiting for an update.

  • Problem with sun outlook connector,  Microsoft LDAP services

    Dear All
    I have big problem with sun outlook connector and I can find any way to fix the problem,
    I am using sun java system connector deployment to create installation script for my clients.
    in the tool I have specify the location of Microsoft LDAP services, I am using outlook 2003 and sun say this option is not needed for outlook 2003, if I try to create the script and run the script on target client I will receive below error,
    I tried the office CD-ROM as path for LDAP services but the outlook connector says there is no LDAP services on the CD and I receive same error,
    19:02:29 [5365] Outlook version is 11.0.5608.0.
    19:02:29 [5376] Adding MAPI directory 'C:\Program Files\Common Files\System\MAPI\1033' to PATH.
    19:02:29 [5475] TMP directory is 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp'.
    19:02:31 [5362] Checking Windows version.
    19:02:31 [5363] Windows version is 5.1.
    19:02:31 [5364] Checking Outlook version.
    19:02:31 [5509] Checking default mail client.
    19:02:31 [5508] Default mail client is 'Microsoft Outlook'.
    19:02:31 [5178] Verifying that Outlook is not running.
    19:02:31 [5179] Trying to login to shared session.
    19:02:31 [5369] Installing Sun Java System MAPI Service Providers using 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp\Sun Outlook Connector\sunone-mapi-services.msi'.
    19:02:32 [5502] Upgrading the Sun Java System MAPI Service Providers.
    19:02:40 [5370] Finished installing Sun Java System MAPI Service Providers.
    19:02:40 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
    19:02:40 [5367] Sun Java System MAPI Service Providers are installed.
    19:02:40 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
    19:02:40 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
    19:02:40 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
    19:02:40 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
    19:02:40 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
    19:02:40 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
    19:02:41 ERROR: Microsoft LDAP Directory MAPI Service Provider must first be installed.
    Best regards
    Mo

    This is likely to depend on the version of the OC you have. The released one isn't supposed to work with Outlook 2003. Please contact Tech Support for the latest version and help.

  • Problems with a non-BT product or service

    I have just contacted BT as my down IP Profile has become 30% less than it should be over an approximately 6 month period.  This is despite the fact that my line is surprising stable with an average up time of around 14 days and the main disconnection being  BT induced profile resets.
    I have had this issue three times before. The solution is 1 to 3 Openreach Engineer visits that find no fault and end up with a line reset to up the profile.
    This time the Indian call centre rang me, tested the line and found no fault  (as expected). They said because of this they could not do anything and suggested I contacted second line support.
    I then received  the following email 
    "Problems with a non-BT product or service
    Hi,
    You recently contacted us regarding a non-BT product or service. We confirmed that your BT Broadband service and equipment were working ok but we were unable to help you with your product/service as it's non-BT.
    We recommend that you check your user guide or contact your manufacturer regarding the product/service. Before you do that, check out these links below as they may help you further.
    Happy to pay for technical support from BT?
    BT has a team of technical experts. For a monthly fee they can help you with a range of problems. Go to www.bt.com/techexperts to find out more and sign up.
    I am using a BT supplied OpenReach modem and HomeHub 4 A so other than devices connected to the HH4 all kit is BT supplied.
    Can I have some (preferably Moderator) help on this please ?
    Solved!
    Go to Solution.

    DavidM wrote:
    Hi vofsanity2,
    Thanks for posting. I can look into this for you. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
    Cheers
    David
    I am pleased to say that thanks to moderator intervention I was contacted by Kevin who arranged for an OR Engineer visit.
    As expected no fault was found and after a line reset to restore my profile to what it should be (actually slightly better) my 30% drop was corrected.
    It is fairly clear that if you have FTTC and a connection to the cabinet of 1200-1400metres then the DLM is happy to reduce your line speed but reluctant (if at all)  to increase it. This means your profile decreases over time and has to have a manual reset.
    The worrying development this time is that now when the helpdesk tests your line and finds line speed and profile match they assume you have  a problem with a non-BT product or service where as previously they accepted that a 30% drop in profile was a BT Fault. 

  • Hello I have a problem with my Iphone 5S and it`s under warrenty it doesn`t turn on and a blue screen cames up and it doesn`t reset what can I do, I live in Argentina Buenos Aires, please contact me soon, thank you

    Hello I have a problem with my Iphone 5S and it`s under warrenty it doesn`t turn on and a blue screen cames up and it doesn`t reset what can I do, I live in Argentina Buenos Aires, please contact me soon, thank you

    Where did you purchase the phone? Then, you can use this support document to find out how to contact Apple Support from your location. Contact Apple for support and service - Apple Support

  • Problems with Cocoon 2.03 and Weblogic 6.1 SP3

    I am having problems with Cocoon 2.03 and Weblogic 6.1 SP3, when I try to deploy
    the cocoon.war.
    Cocoon works fine when I unpack the cocoon.war into ...\mydomain\applications
    (after I changed cocoon.xconf to use the following transformer factory: org.apache.xalan.processor.TransformerFactoryImpl).
    However, when I deploy the cocoon.war through the weblogic console and try to
    invoke cocoon (http://localhost:7001/cocoon/) I get the following error:
    ERROR (2002-09-26) 11:28.40:859 [sitemap] (/cocoon/) ExecuteThread: '7' for
    queue: 'default'/Handler: Error compiling sitemap
    java.util.zip.ZipException: The system cannot find the file specified
         at java.util.zip.ZipFile.open(Native Method)
         at java.util.zip.ZipFile.<init>(ZipFile.java:110)
         at java.util.zip.ZipFile.<init>(ZipFile.java:125)
         at weblogic.utils.zip.ZipURLConnection.getInputStream(Handler.java:49)
         at org.apache.cocoon.components.source.URLSource.getInputStream(URLSource.java:151)
         at org.apache.cocoon.components.source.URLSource.getInputSource(URLSource.java:223)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.generateResource(ProgramGeneratorImpl.java:318)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.createResource(ProgramGeneratorImpl.java:282)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.load(ProgramGeneratorImpl.java:196)
         at org.apache.cocoon.sitemap.Handler.run(Handler.java:228)
         at java.lang.Thread.run(Thread.java:484)
    I understood that there were problems when the cocoon.war file that did occur
    when you unpacked the war, but I believed that these problems did not occur with
    WLS6.1 SP3.
    Has anyone else encountered this problem and solved it? Any help would be greatly
    appreciated.
    Thanks in advance.
    Paul

    This how I got Cocoon 2.04 up and running on WLS 6.1.4
    Download the Cocoon source from http://xml.apache.org/cocoon/dist/
    Remove all but the following JARs from lib/optional:
    commons-jxpath-1.0.jar
    jing-20020724.jar
    resolver-20020130.jar
    servlet_2_2.jar
    commons-logging-1.0.jar
    jtidy-04aug2000r7-dev.jar
    rhino-1.5r3.jar
    xt-19991105.jar
    Update lib/jars.xml to reflect these changes
    Issue build commands:
    ./build.sh clean (Note: Always clean first!)
    ./build.sh -Dinclude.webapp.libs=yes -Dexclude.webapp.samples=yes -Dexclude.webapp.documenation=yes
    -Dexclude.webapp.javadocs=yes webapp
    Copy the following JARs to your WLS instance’s lib directory:
    xercesImpl-2.0.0.jar
    xml-apis.jar
    xalan-2.3.1.jar
    xt-19991105.jar
    java/lib/tools.jar
    Sample of config/SERVER_NAME.setenv
    LIB=/path/to/lib
    JARS=$LIB/xercesImpl-2.0.0.jar:$LIB/xml-apis.jar:$LIB/xalan-2.3.1.jar:$LIB/xt-19991105.jar:/opt/java1.3/lib/tools.jar
    JAVACLASSPATH=$JARS:.:$JAVACLASSPATH
    JAVA_HOME=/opt/java1.3
    Deploy the resluting cocoon.war and you should have a Cocoon up and running that
    can do the XML->HTML Hello World sample. The status page works fine too.
    My advice is to launch this stripped configuration first and if needed add more
    features later by adding the JARs of your choice to the class path (or add the
    to your webapp-build if you are confident that WLS are capable of handling their
    manifests).
    Good luck
    /Peter
    "Paul Petley" <[email protected]> wrote:
    >
    >
    I am having problems with Cocoon 2.03 and Weblogic 6.1 SP3, when I try
    to deploy
    the cocoon.war.
    Cocoon works fine when I unpack the cocoon.war into ...\mydomain\applications
    (after I changed cocoon.xconf to use the following transformer factory:
    org.apache.xalan.processor.TransformerFactoryImpl).
    However, when I deploy the cocoon.war through the weblogic console and
    try to
    invoke cocoon (http://localhost:7001/cocoon/) I get the following error:
    ERROR (2002-09-26) 11:28.40:859 [sitemap] (/cocoon/) ExecuteThread:
    '7' for
    queue: 'default'/Handler: Error compiling sitemap
    java.util.zip.ZipException: The system cannot find the file specified
         at java.util.zip.ZipFile.open(Native Method)
         at java.util.zip.ZipFile.<init>(ZipFile.java:110)
         at java.util.zip.ZipFile.<init>(ZipFile.java:125)
         at weblogic.utils.zip.ZipURLConnection.getInputStream(Handler.java:49)
         at org.apache.cocoon.components.source.URLSource.getInputStream(URLSource.java:151)
         at org.apache.cocoon.components.source.URLSource.getInputSource(URLSource.java:223)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.generateResource(ProgramGeneratorImpl.java:318)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.createResource(ProgramGeneratorImpl.java:282)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.load(ProgramGeneratorImpl.java:196)
         at org.apache.cocoon.sitemap.Handler.run(Handler.java:228)
         at java.lang.Thread.run(Thread.java:484)
    I understood that there were problems when the cocoon.war file that did
    occur
    when you unpacked the war, but I believed that these problems did not
    occur with
    WLS6.1 SP3.
    Has anyone else encountered this problem and solved it? Any help would
    be greatly
    appreciated.
    Thanks in advance.
    Paul

  • Problems with AOL e-mail and Droid Charge

    Problems with AOL e-mail and Droid Charge
    After setting up my AOL email account on my Charge, it has been syncing new messages ok, but I've been having other problems:
    - Syncing AOL mail: I have the Charge set to sync 50 emails (set up the same way as my Comcast Account) but the AOL account pulls up the last 50 old emails and delivers them to the phone. (Comcast does not do this). If I delete these old messages, it just pulls up the same amount of even older mail. Very frustrating. Because of the 2nd problem below, some of these messages were actually deleted on my AOL account before I realized what was happening. It seems I have to just keep 50 old mails on my Charge to prevent this from happening. Any ideas?
    - Second problem (kinda related) Deleting Old Mail: When I delete AOL emails I have read on the Charge, they are also deleted from my 'old mail' folder on AOL and sent to deleted mail. This is not how it worked on my BB Storm2. After deleting them with the Storm, the AOL mail would show them as read and put them in 'old mail' unless I told the Storm to delete them from the server. I cannot find any "choice" option on the Charge. I hate this because the "deleted mail" folder on AOL dumps its contents much more quickly than the "old mail" folder. How do I stop this from happening?
    FYI, both Comcast and g-mail are working as they should.....
    Thanks,

    Dear Richs10,
    As to the second problem, I have seen this before in other threads. The only solution I can come up with is to delete the AOL account and set it up on the phone from scratch. The reason for this is that the ONLY time you are able to see the option for leaving email on the server (or removing them) after reading on the phone is during the account setup process. After the account is set up, there seems to be no way to access this setting again. Kind of dumb, IMHO, but that seems to be the case.
    If you need step-by-step walkthrough of the account setup, PM me.

  • There's a problem with my pervious purchase and it doesn't let me change cards why?

    There's a problem with my pervious purchase and it doesn't let me change cards why?

    Ashtin123 wrote:
    There's a problem with my pervious purchase..
    Then you need to Contact iTunes Customer Service
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Why I had no problems with the VZW employees and other people have?

    I think that most people who cannot resolve problems with the VZW have an attitude problem.
    Wise saying:  you can get more with honey than with vinegar.
    Since I “upgraded” my old Samsung Sway to a new Samsung Intensity III, in the past three weeks I spent many hours dealing with the VZW store employees, customer service reps, and tech support people. The phone was replaced two times, and I had no problem getting the replacements.
    The third phone did not working how I expected.
    Today I called VZW customer service and said I don’t need anymore trouble shooting and I wanted find a resolution, which will be satisfactory to both of us. After a short conversation with a customer service rep, I was connected with a tech support. I told him that I don’t need any more trouble shooting on the Samsung Intensity III because I already spent HOURS doing that on three devices.
    We spoke about what the VZW could offer me, about replacements with different phones, etc. Our conversation ended with me offering the resolution that could satisfy me, which was to keep this phone and my account will be credited for the $30.00 “upgrade” fee and I will buy Samsung Sway on eBay. NO PROBLEM. 
    My account was credited and I was advise about the ESN number and activation.
    Why I had no problems with the VZW employees and other people have? The answer is simple. I did not have attitude when I was spoke to them.
    So if you want the problem to be resolved, put your anger in you pocket before you start the conversation. You can say that you are angry, frustrated, etc like I did, but add that you understand that this is not their fault that the manufactures makes a crap phones.

    Yes, you are right. I lost my upgrade. Also, it’s true that I could buy the phone on eBay… if I knew then what I know now. In the past, I never had problem with any of my phones. Doing an upgrade with the VZW was a normal thing for me. I didn’t expect that Samsung Intensity III would be a junk phone.  My last upgrade was 4 years ago. I had $50.00 ‘new every two’ credit on my account, which was used for an upgrade.  I lost the $50.00 credit paying for Samsung Intensity III. Sometimes we learn from our mistakes or from a bad experience. Three weeks ago I did not know that I could buy a phone on eBay and activate with VZW without paying $30.00.
    Samsung Sway is coming from …eBay – keep your fingers crossed for me.

  • I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

    I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

    After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
    iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

    columbus new boy wrote:
    How crap is that?
    It's not crap at all.
    It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
    There has to be a solution.
    Why not simply make a playlist with the songs you want on the iPhone?
    and maintain a current backup of your computer.

Maybe you are looking for

  • FCP Studio defaults

    I have some HD footage I'm trying to capture into FCP studio but it keeps defaulting to standard def. Some setting I'm overlooking or something else I'm missing. How do you capture HD footage into FCP studio??

  • Total tax percentage in table

    Hi, We want to prepare one report with tax code and tax percentage.In one tax code different condiiton exists.In such case is their any table in which we can get total tax. For example Country code BE    tax code DA  input tax is 10% (condition type

  • Subcontracting process in APO

    Hi All, I am trying to create a typical subconracting process in APO as in R/3. Questions: 1-Do I have to create a resource in R/3? 2-Do I have to create a routing in R/3? 3-Do I have to create a subcontracting location except vendor location? 4-How

  • After Effects error: crash occurred while invoking rendering plug-in "Advanced 3D"

    Process:         After Effects [356] Path:            /Applications/Adobe After Effects CS5/Adobe After Effects CS5.app/Contents/MacOS/After Effects Identifier:      com.adobe.AfterEffects Version:         10.0.1 (10.0) Code Type:       X86-64 (Nativ

  • Want to see real time materialized view example

    Hi all i m d beginner with the pl/sql and want to know some real time scenario of materialized view ..i go through some examples on Database journal...but still oif u can help me for that it been great for me thanks rommy