Problems With Hardware Macbook Pro 13" Early 2011

Dear Mac-Friends,
My product is a Macbook Pro 13" Early 2011, runing a OS X 10.7.5.
Problems I am facing are:
1. Completly crash: with no explanation appears some patches of collored pixels all over the screen and the computer starts making a "Beep" (Then I need to manually re-start the Macbook). Some friends said it look like a "memory pouring".
2. Mac Crash: it appears that black screen saying: "You need to restart your computer, please press the power button).
Both problemas start happening since I recently changed it's ram memory. I took the 2 x 2GB original, replacing for a Kingston 2 x 4GB 1333MHz DDR3, following the instructions in the guide.
So far both problems happen when I am working (maximum time I have worked with no crash was something like 3 hours).
Concerned with my situation I have looked for help in the web and most people say I have to make a Hardware Test. But I am trying really hard to this the Hardware Test (I tried holding "D", holding "Option + D", holding "Alt + D" in many ways that you can imagine, but could not run the Hardware Test, and no problem message was shown).
I have already read the article in Mac Support Community about "Hardware Test" and I tried to install the EFI update for Macbook Pro 13" Early 2011, but says "This software is not compatible with your computer". So weird!
Would anybody help me please?
Thank you very much in advance.
Best to you all!

Hey friend.
The software Rember says: It's not compatible with my OSx.
This is the crash report:
Interval Since Last Panic Report: 40181 sec
Panics Since Last Report:          1
Anonymous UUID: DA567D70-8641-42CB-A7BE-29998F2FD508
Thu Apr 18 15:12:18 2013
panic(cpu 3 caller 0xffffff80002c4794): Kernel trap at 0xffffff800026ae60, type 6=invalid opcode, registers:
CR0: 0x0000000080010033, CR2: 0x0000000007e24000, CR3: 0x0000000193f9f053, CR4: 0x00000000000606e0
RAX: 0x0000000000000004, RBX: 0xffffff801ee6a3e0, RCX: 0x0000000000000005, RDX: 0x00000000001a28cd
RSP: 0xffffff80f0ef3cc8, RBP: 0x00000000ffffff44, RSI: 0x000000002231db52, RDI: 0xffffff80036f6460
R8: 0xffffff80008bd560, R9: 0x00000000fb275557, R10: 0x0000000007e58000, R11: 0xffffff80002dad00
R12: 0x0000000000000006, R13: 0x0000000000000000, R14: 0xffffff8009e6b460, R15: 0x0000000000000000
RFL: 0x0000000000010206, RIP: 0xffffff800026ae60, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000007e24000, Error code: 0x0000000000000000, Faulting CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff80f0ef3970 : 0xffffff8000220792
0xffffff80f0ef39f0 : 0xffffff80002c4794
0xffffff80f0ef3ba0 : 0xffffff80002da55d
0xffffff80f0ef3bc0 : 0xffffff800026ae60
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xffffff44
BSD process name corresponding to current thread: Google Chrome He
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 39330809944560
last loaded kext at 29693531183383: com.apple.driver.AppleUSBCDC            4.1.22 (addr 0xffffff7f80839000, size 16384)
last unloaded kext at 29882841748291: com.apple.driver.AppleUSBCDC         4.1.22 (addr 0xffffff7f80839000, size 12288)
loaded kexts:
com.microsoft.driver.MicrosoftMouseUSB   7.1
com.microsoft.driver.MicrosoftMouse          7.1
foo.tap   1.0
foo.tun   1.0
com.rim.driver.BlackBerryUSBDriverInt     0.0.74
com.apple.filesystems.smbfs          1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.driver.IOBluetoothSCOAudioDriver         4.0.8f17
com.apple.driver.IOBluetoothA2DPAudioDriver       4.0.8f17
com.apple.driver.AppleMikeyHIDDriver      122
com.apple.driver.AppleHDA          2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMikeyDriver            2.2.5a5
com.apple.driver.AudioAUUC       1.59
com.apple.driver.AGPM   100.12.75
com.apple.driver.AppleIntelHD3000Graphics            7.3.2
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleSMCPDRC            5.0.0d8
com.apple.iokit.IOUserEthernet      1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver   1.2.3
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.ApplePolicyControl          3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleBacklight    170.2.2
com.apple.driver.AppleMCCSControl         1.0.33
com.apple.driver.BroadcomUSBBluetoothHCIController        4.0.8f17
com.apple.driver.AppleUSBTCButtons       227.6
com.apple.driver.AppleUSBTCKeyboard     227.6
com.apple.driver.AppleIRController            312
com.apple.iokit.SCSITaskUserClient          3.2.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless   1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib        1.0.0d1
com.apple.BootCache       33
com.apple.driver.XsanFilter           404
com.apple.iokit.IOAHCISerialATAPI         2.0.3
com.apple.iokit.IOAHCIBlockStorage         2.1.0
com.apple.driver.AirPort.Brcm4331            561.7.22
com.apple.driver.AppleUSBHub    5.1.0
com.apple.driver.AppleSmartBatteryManager            161.0.0
com.apple.driver.AppleSDXC        1.2.2
com.apple.iokit.AppleBCM5701Ethernet     3.2.4b8
com.apple.driver.AppleEFINVRAM           1.6.1
com.apple.driver.AppleAHCIPort   2.3.1
com.apple.driver.AppleFWOHCI   4.9.0
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET        1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC     1.5
com.apple.driver.AppleAPIC         1.6
com.apple.driver.AppleIntelCPUPowerManagementClient      195.0.0
com.apple.nke.applicationfirewall   3.2.30
com.apple.security.quarantine        1.4
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement   195.0.0
com.apple.kext.triggers     1.0
com.apple.driver.DspFuncLib        2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily     10.0.5
com.apple.iokit.IOAudioFamily     1.8.6fc18
com.apple.kext.OSvKernDSPLib   1.3
com.apple.iokit.IOFireWireIP        2.2.5
com.apple.driver.AppleHDAController        2.2.5a5
com.apple.iokit.IOHDAFamily      2.2.5a5
com.apple.driver.AppleGraphicsControl       3.1.33
com.apple.driver.AppleSMC         3.1.3d10
com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily   5.1.1d6
com.apple.driver.AppleBacklightExpert       1.0.4
com.apple.iokit.IONDRVSupport   2.3.4
com.apple.driver.AppleSMBusController     1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB            7.3.2
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily            4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter       1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily            1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter            1.2.5
com.apple.driver.AppleUSBMultitouch       230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub        5.1.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice           3.2.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily        1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.driver.CoreStorage        182.13
com.apple.driver.AppleThunderboltNHI      1.6.0
com.apple.iokit.IOThunderboltFamily        2.0.3
com.apple.iokit.IO80211Family     420.3
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOEthernetAVBController   1.0.1b1
com.apple.iokit.IONetworkingFamily         2.1
com.apple.iokit.IOAHCIFamily     2.0.8
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.driver.AppleEFIRuntime            1.6.1
com.apple.iokit.IOHIDFamily       1.7.1
com.apple.iokit.IOSMBusFamily   1.1
com.apple.security.sandbox           177.9
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages         331.7
com.apple.driver.AppleKeyStore    28.18
com.apple.iokit.IOUSBMassStorageClass    3.0.3
com.apple.driver.AppleUSBComposite       5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice       3.2.1
com.apple.iokit.IOStorageFamily   1.7.2
com.apple.iokit.IOSCSIArchitectureModelFamily     3.2.1
com.apple.iokit.IOUSBFamily      5.1.0
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily        2.7
com.apple.iokit.IOACPIFamily     1.4

Similar Messages

What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

Hello Alex,
It sounds like you are getting excessive CPU usage when connecting an external display via HDMI to your computer. I would try the troubleshooting steps outlined in the article named:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
When using an external display be sure to check the following:
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the systemYou can reset the Mac's parameter RAM and SMC.Reset the resolutionStart by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Cheers,
Sterling

SSD-problem with MacBook Pro 13" (Early 2011)

Hi there,
I've tried to use two different SSDs in my MacBook Pro 13" (early 2011). The first one (Samsung 840 Series, 500GB) crashed after two days: the beachball appeared and after a restart there was this question mark-symbol on my screen: no system found. Had to send this SSD back to Amazon. A few days later I've bought a new one, a SanDisk Extreme with 450GB. I've used it for two days, then my system crashed again and after a restart of my Mac I couldn't get any further than to the grey apple-symbol. Even the recovery partition didn't work anymore. Does anyone of you have the same problem with his (or her) MacBook Pro 13" (early 2011) - and any ideas for a solution?
Thanks for your answers!
Torsten

can you confirm if this is ok to buy:
http://www.ebay.ca/itm/New-HDD-Hard-Drvie-Cable-for-13-MacBook-Pro-A1278-MD101-M D102-821-1480-A-2012-/181269577616?pt=LH_DefaultDomain_0&hash=item2a34823f90&_u h b=1
or
http://www.ebay.ca/itm/NEW-MacBook-Pro-Unibody-13-A1278-2012-md101-102-HDD-Hard- Drvie-Cable-821-1480-A-/121183868039?pt=LH_DefaultDomain_0&hash=item1c371f1487& _ uhb=1
or this one..??
http://www.ebay.ca/itm/for-APPLE-MacBook-Pro-13-A1278-HDD-Hard-Drvie-Cable-MD101 -MD102-821-1480-A-2012-/331060187298?pt=LH_DefaultDomain_0&hash=item4d14b990a2& _ uhb=1
i guess i aint gotta buy those brackets again..?
Thanks
Anjillan

Right, MacBook Pro 17" early 2011(Built March) and my new OCZ sata III 6G not working, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III.

My MacBook Pro 17" early 2011(built March) and my new OCZ sata III 6G are not working together, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III and in my MacBook Pro it does not work.
Now MacBook Pro 17" early 2011 built May onward do not have this problem it was fixed in the Intel's 6 Series Chipset. (So there is a problem). Cam I have my MacBook Pro fixed please.

After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it.

MacBook Pro 17" Early 2011 Model: Auto Shutdown/Restart Problem

Hey guys!
This is my first time to sign in, join the community, and ask a question or create a discussion. FYI, I really have little knowledge on tech stuff so please bear with me. Here's my problem, and I hope you can give out your suggestions:
I have a MacBook Pro 17" Early 2011 Model which I have upgraded to OS X Mountain Lion.
A month or two ago, it had started shutting down or restarting at random times. As time passed, this problem became more frequent.
I finally decided to have it checked at Digital Hub, a licensed Apple distributor. After almost a week, they've finally diagnosed that the problem is with my battery. I got my MacBook pro back around 2 (two) weeks ago, and ever since then I had to use an outlet in order for it and myself to work properly. Right now, I'm still saving up to purchase new batteries.
Recently, however, I've noticed that my MacBook Pro auto restarts even when plugged. Take note, RESTART and no longer shutting down completely. Upon further trials, I've finally concluded that it does so only during the use of heavy programs such as Diablo 3, Final Cut Pro X, and when rendering with iMovie. I have yet to try with Adobe products, particularly with Lightroom and Photoshop, and see if it does the same. But more or less, that's what I've noticed so far.
Given that I still haven't purchased the battery yet, I know it's still vague to know the real probelm/solution. But with the given situations, what are you views on this matter? Please let me know. It'd be of great help. Thank you and I hope to hear from you soon!
Brent Hughldridge A. Chua
Multimedia Arts Student
Philippines
(Note, I'm a starting out Multimedia Arts Student and photographer. I have little knowledge of the industry for now, but I'm willing to learn. So please forgive me if I don't understand your suggestions at once if they are very in depth or technical.)

Thanks for taking so much time in helping me.
Just an update:
2 loops/passes done - no errors.
Called up Digital Hub and talked to the technician, he says there are 3 possible problems:
1. Battery (which is still inside the laptop) may cause some disturbances with the electric current
2. Software related - most likely re-formatting may be needed
3. Video card may have failed, which means complete change of the logic board ----> worst case
I'm crossing my fingers that it's either of the first two.

MacBook Pro 13" Early 2011 Backlight Keyboard Not Working?! Software Problem...

So my "MacBook Pro 13" Early 2011" backlight keyboard hasn't been working. I have tried LabTick today, doesn't fix anything. Even in high or low lighting situations (dispite the Adjust keyboard brightness in low light being off) doesn't like to go on. It doesn't give me a circle with a cross like it does with that box checked in day light. It shows on the screen the
16 dots fully light after hitting F6 fully, just it doesn't light up. I one time had to reset my Mac OS at the Apple Store, it fixed the problem, but when I restored with a time machine backup, it went back to this software problem. How can I fix this?! What is wrong with my OS? Mountain Lion? How can I fix this?!

If it does not detect the display automatically, try going to system preferences>displays, click detect displays.

Severe wireless problems; MacBook Pro 13inch Early 2011

I just installed updates on my MacBook Pro 13inch early 2011. I now have severe problems with my wireless. What can I do to undo the updates? One of them was a firmare update.

There is generally no need to undo the Updates, just Re-Do your wireless setup:
System Preferences > Netowrk > WiFi > ( Assist Me ) ...
... Assistant.
Be sure to specify a new Location.

I want to upgrade the ram on my macbook pro 13inch (early 2011). i found an 8Gb (4Gb x2) PNY "mac compatible" that is DDR3 PC3-10666 but my macbook is a PC3-10600. Do i need to use a ram with the exact specifications that my macbook lists?

i want to upgrade the ram on my macbook pro 13inch (early 2011). i found an 8Gb (4Gb x2) PNY "mac compatible" that is DDR3 PC3-10666 but my macbook is a PC3-10600. Do i need to use a ram with the exact specifications that my macbook lists? Or will the ram i am trying to buy work fine?

Yes that is your best bet. Without looking at it too closely double check your options here:
OWC http://www.macsales.com/
or Crucial http://www.crucial.com/

I am looking at a MacBook pro 17 early 2011 with water damage that doesn't turn on. Now t would have a voided warranty wondered if anyone knew how much apple would charge to fix. If its worth fixing?

I am looking at a MacBook pro 17 early 2011 with water damage that doesn't turn on. Now t would have a voided warranty wondered if anyone knew how much apple would charge to fix. If its worth fixing?

It mostly depends on the damage that was done (the LCD, keyboard, etc) but yours does not turn on so I am assuming it was fully submerged and completely damaged. Therefore, I would think your warranty is most definitely void.
When did this happen? How bad was it? Have you taken any measures to get it to dry? You can go online and you can find tips on how to dry it at least a bit so that it is not as bad, it might not get it to work, but it can help you prevent rusting, which would cause further damage thus reducing the probability of getting repaired/replaced. Also, do not try to turn it on unless you have tried to dry it as it will damage it even more (electricity + water = destruction). I would suggest giving this a try, and if it is still not working then it is probably worth a try with Apple, just go in for a consultation in terms of pricing. If they seem too high and/or the warranty is void, then you can opt for after-market products which significantly reduce the repair costs... as you would have nothing to lose anyway in terms of warranty.
It's $3,000, that pays my rent. Even investing $1,000 would be better than just not giving it a try at all lol.

Does my macbook pro 13" early 2011 will be compatible with 2560x1440 thunderbolt screen resolution?

I'm planning to buy a Thunderbolt display for my macbook pro 13" early 2011,
I want to know if after connect the laptop to the screen, will show in 2560x1440 resolution
Thanks for your help!

Specs say:
External Resolution
Up to 2560 by 1600 pixels

15" i7 Macbook Pro from early 2011.takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get

Hello All,
I have a 15" i7 Macbook Pro from early 2011. The past few weeks, it has been getting increasingly difficult to get on my computer. It takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get to the dark gray log-in screen. Even when I finally get logged in to start working, thinking it would be okay now, it shuts down randomly.
I've ruled out the possibility of a software problem because I've just done a clean re-install of Mac OS X Mavericks on my computer just yesterday.
I did upgrade the RAM recently, about a month and a half ago, from 4GB to 16GB, I went to the apple store four days after that upgrade to have them do a hardware test, and clean the inside of my laptop, which helped with previous heat issues. When they did the hardware test, the hardware was all registered as fine from their system.
I've tried resetting the SMC, PRAM, and doing the internet recovery hardware test, but to no avail. I thought I could at least find out what parts needed to be replaced from the hardware test but it seems that when the hardware test is almost finished, the computer just shuts down, So I am unable to see the results.
My computer is also having battery issues, under battery condition, it says "replace now," parts have been ordered, waiting for arrival. But if the battery health is low, it should still boot up fine, it would just hold a significantly less charge.
Could this be a hard drive issue?
Has anyone had similar symptoms and how was it resolved?
Does anyone know what I can do to alleviate this issue?
I haven't had time to take it to Apple because I'm currently taking a 21 credit semester academically. I'm an art and design student so my computer is basically the bane of my existence. Help! Any constructive advice is welcomed!
Thank you so much for your input!
-Christina C.

Problem description:
The Hard Disk is failing.
EtreCheck version: 2.0.11 (98)
Report generated November 4, 2014 at 7:59:28 AM EST
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1440 x 900
AMD Radeon HD 6750M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:3:43
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
HDV4 (disk0s2) / [Startup]: 749.30 GB (712.10 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.avast.userinit.plist Support
Launch Daemons: ℹ️
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.avast.init.plist Support
[loaded] com.avast.uninstall.plist Support
[loaded] com.avast.update.plist Support
[invalid?] com.perion.searchprotectd.plist Support
User Launch Agents: ℹ️
[invalid?] com.avast.home.userinit.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.jdibackup.ZipCloud.autostart.plist Support
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
AdobePDFViewer: Version: 10.1.1 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Default Browser: Version: 537 - SDK 10.9
User Internet Plug-ins: ℹ️
TroviNPAPIPlugin: Version: 1.0 - SDK 10.9 Support
Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
Avast Online Security
Trovi Search for Safari
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      16% mds
      7% WindowServer
      1% loginwindow
      1% fontd
      1% com.avast.daemon
Top Processes by Memory: ℹ️
120 MB com.avast.daemon
86 MB Google Chrome
52 MB Finder
52 MB WindowServer
41 MB Google Chrome Helper
Virtual Memory Information: ℹ️
13.45 GB Free RAM
1.34 GB Active RAM
944 MB Inactive RAM
1.43 GB Wired RAM
1.11 GB Page-ins
0 B Page-outs

Help MacBook Pro 13" early 2011 suddenly black screen in Windows 7 SP1. EFI 2.2.

Hi, everyone, I need help here.
Apple MacBook Pro 13" early 2011 preinstall Lion version, EFI 2.2, Boot Camp 4.0. suddenly black screen in Windows 7 SP1 (black screen and also no sound at all, need to press power button to off). What happen?? Please someone tell me what to do?
I have delete bootcamp HD and reinstall windows 7 but the problem is still here, I have reset PRAM and SMC too.
The video on the black screen: (http://www.youtube.com/watch?v=z3dLTFSD-v8)

Oh I actually have the problem in Mac OS, not even using the Bootcamp or Windows 7
Csound1 wrote:
lokiman wrote:
I am having the exact same problem with my 13" early 2011 Macbook Pro. I have 10.6.8. I used the disk that came with the laptop to restore the OS to 10.6.7 but the problem existed there too. I have now updated it back to 10.6.8. The problem still exists. This doesn't seem to be limited to an OS version and seems like an issue with device driver or with hardware. I will try to take it to the Apple store and see if this gets resolved.
You too have a black screen in Windows 7. ?

MacBook Pro 13' Early 2011: Still Slow After 16GB RAM Upgrade

Hi,
I have a MacBook Pro 13' Early 2011 running Yosemite. After the RAM upgrade to 16GB, the speed of the computer is still not satisfactory, having some lag times in launching softwares and startup. Please suggest me what to do. Below is the report. Thank you!
Problem description:
The computer is still running slow even after the RAM upgrade to 16GB.
EtreCheck version: 2.0.11 (98)
Report generated November 18, 2014 at 5:40:20 AM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:7:52
Disk Information: ℹ️
ST9320325ASG disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 318.84 GB (156.62 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
[not loaded] com.marvell.kext.USBGenericPrinterClass (1.0.0) Support
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.74) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
[not loaded] com.wacom.kext.pentablet (5.3.0 - SDK 10.8) Support
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.rim.BBAlbumArtCacher.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[running] com.wacom.pentablet.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.rim.BBDaemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[not loaded] com.valvesoftware.steamclean.plist Support
User Login Items: ℹ️
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 71 Check version
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.0.11 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
DirectorShockwave: Version: 11.6.5r635 Support
User Internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
WebEx64: Version: 1.0 - SDK 10.6 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 162.22 GB
Destinations:
LACIE SHARE [Local]
Total size: 350.07 GB
Total number of backups: 5
Oldest backup: 2012-07-17 01:12:57 +0000
Last backup: 2014-03-19 07:05:24 +0000
Size of backup disk: Too small
Backup size 350.07 GB < (Disk used 162.22 GB X 3)
Top Processes by CPU: ℹ️
      9% mds
      6% WindowServer
      1% BBLaunchAgent
      0% AppleSpell
      0% fontd
Top Processes by Memory: ℹ️
103 MB mds_stores
86 MB Dropbox
86 MB ocspd
69 MB com.apple.WebKit.WebContent
52 MB Safari
Virtual Memory Information: ℹ️
13.07 GB Free RAM
1.71 GB Active RAM
740 MB Inactive RAM
1.66 GB Wired RAM
1.31 GB Page-ins
0 B Page-outs

First go to the RIM web site and look to see if they have an uninstaller for the device you had. Some times a reinstall of the application and then running the uninstaller is required for complete removal.
If no uninstaller is available, then you will have to use Spotlight to find all items with 'Blackberry' and 'Rim' in the titles. I would also download EasyFind and use that to locate such files. Often it will locate items that Spotlight misses.
Ciao.

My Macbook Pro (15" early 2011) got blue screen every i normally booted it. It only can enter the OS when it's in safe boot. Solution please.

My Macbook Pro (15" early 2011, Mountain Lion, but after reinstall i change it to snow leo) got blue screen every i normally booted it. It enter the OS only when it's in safe boot.
I've tried any solution that i got from the internet, such as:
-Reinstalling the OS X (normal install & clean install)
-Reset PRAM and SMC
-Repair Disk Permissions and Repair Disk from Disk Utility (the result is OK. There's no problem)
-Repair Disk Permissions manually (with Command + S at the beginning of booting)
-Checking Hardware from Application Installer DVD (result is OK)
-Checking from Mac Resource Inspector/MRI (result OK)
-Booting from Recovery Disk is same problem, blue screen
All of that solution is not working. My Macbook still got light blue screen and sometimes blue screen with lines after apple logo and spinning wheel is shown.
HDD is in good condition because when it's checked on the other macbook it can be booted. But if you must know, other HDD can't be booted when its plugged to my macbook (blue screen again). If i do safe booting, it works but can't play video and music also photobooth. I got confused with this case.
Any solution or comment? Thank you very much by the way

Hi. I'm not trying to rush things, you may have a different problem, but your issue looks quite familiar to me. I recently had a problem with the discrete graphics card (the Radeon GPU) due to overheating, all because a faulty application of the thermal compound in the factory.
In my case, the problem started slowly and intermittently, a few days after a gaming session (Quake 3) of about three hours (at the moment, I didn't realized that could be linked to the problem).
This issue is being actively discussed in another threads in this forum, but so far there's enough evidence that it's been causing similar problems for 2011 MBPs owners: screen corruption, black/blue screens, and in some cases, a total inability to boot. Some of the threads I'm talking about:
https://discussions.apple.com/message/13150366#13150366
https://discussions.apple.com/message/21110132#21110132
So far, and since the problem seems to affect only the discrete GPU (that's why you can boot in safe mode) a possible solution is to disable it by removing some extensions which prevent OS X from loading the Radeon drivers. This post describing the process (there are different files involved depending of your GPU version, so make sure you are moving the right ones):
https://discussions.apple.com/message/22521574#22521574
In the case your discrete GPU survived and is not permanently damaged, I personally had success by changing the thermal compound myself, which completely fixed the problem (at least for now). I've posted about it here:
https://discussions.apple.com/message/22630561#22630561
I hope you can find a solution, believe me I know the feeling when you see your expensive machine turning into a brick and it *****.
Good luck!

Macbook Pro 13" Early 2011 Lag Spikes

Okay let me just brief you on my Macbook.
In September 2011 i bought a Macbook Pro 13" Early 2011 model, 4GB RAM, 2.7GHz Processor, you can get the rest on the site.
( http://support.apple.com/kb/sp619 )
I bought it as a ex-display model, so you can imagine it already has some milage from it.
Through the (almost) 2 years i've had it, apart from the odd overheat shutdown, and a 1 charger replacement, it's been no hassle, even with me constantly shutting it and moving it. It seems that all the issues are coming in bulk.
I generally use the laptop for gaming, mostly World of Warcraft, sometimes Minecraft, and lately Starcraft, and Spellforce on BOOTCAMP or virtual machines.
About 2 weeks ago, the laptop started refusing to charge, i couldn't understand if it was the charger (as i only replaced it a few months earlier and the cable was still in perfect condition) or the port itself in the laptop. I took my laptop to an Apple store, found it was the Magsafe on the cable, replaced it on the spot, but the reason why i'm saying this is i'm wondering why it broke so quickly, and if lack of power has anything to do with it.
I've grown a liking to Spellforce so instead of having to restart into the Windows side of my Mac, i just use the Virtualbox Virtual OS i already have set up from when i used to work from home and have to use certain software on windows because Wine just couldn't cut it (and lets face it, Mission Control is awesome, then you go on Windows and everything just seems to cluttered). So i read the default specs for the game on Steam (2GB) so i give Virtualbox 2GB, but this was a MAHOOSIVE mistake, because as soon as i clicked start, it's been a down hill spiral.
The computer immediately started lagging, to the point where the laptop was actually unusable, so i force restarted it by pressing down the power button for 5 seconds and i let it restart. After it booted, everything seemed fine (i expected nothing else) so i decided to only give it 1GB of RAM, and just turn down the settings to the lowest possible (which is something i've had to do with World of Warcraft recently. It used to be able to run on Ultra when i first got the laptop, now it struggles on low and if i have a browser up at the same time). Again, big mistake, it lagged to unusability. So i restart again, but this time it takes 5 minutes to boot, and once booted everything is so slow, so i decide to re-install the OS, so i get my flash drive and spend the next hour moving things over from my user folder because when i would try to move a folder that had 5+ files or something that was 100MB or larger, it would error out saying a certain file couldn't be read or written, and would cancel and remove everything else that was transfering at the time.
So i restart but boot into the recovery option, and do a refresh the OS, and i let it download and install. I was surprised to see when it had all completed that it still had all my files, but it still ran slow, not as slow as before but definitely not as good as before, i would estimate at quatre the performance. So i assume that Virtualbox must have editted some system setting and my Mac thinks i only have 2GBs of RAM and not 4GB, so i search on how to reset the bootloader, and i was tried the alt + cmd + r + p, but after that when it booted, it came to the wallpaper but i was getting these popups that Finder had unexpectedly quit, so i click Okay a few times, they keep coming back up, so i look at the details and it says that the app had failed 500+ times before.
So i put my Snow Leopard disk in, use Disk Utility and use erase on my Mac OS partition, then i re-install Snow Leopard, then i download and install Mountain Lion again, but the snails pace remains. I do alittle more research and someone suggested modifying the partition size by a few gigs or so to re-write it and reset certain variables attached, didn't work, even after a reboot.
So yesterday i just put the Snow Leopard disk in, and i remove both partitons (Mac and Windows) and i make one partition. I install Snow Leopard and then Moutain Lion, and so far it appears that everything it back up to speed... however, i've been keeping a keen eye on Activity Moniter and "top" in Terminal, and my CPU usage and RAM usage are always relatively low. I always seem to have 1GB-2GB RAM free, and my Idle CPU always seems to be above 80%-90% but i'm getting these weird lag spikes. I notice it most when i try installing World of Warcraft again, the download speed averages around 3MB/s (my ISP is Virigin Media and i get 60Mbs/s fibre optic so i know it's not my connection failing) and then the app seems to freeze (stops refreshing the average speed, and then about 5-10 seconds later, it starts refreshing again but it's at 12-50KB/s. This also seems to happen a lot when i use web browsers.
I have noticed something new, literally only about 30 minutes before i started writing this. There is a noise that happens every 2-4 seconds, it's pretty regular, it sounds like a grasshopper, or other chirping bug/insect inside my laptop. It sounds like metal scraping against metal, which is worrying. It's coming from the right hand side of the Magic Track Pad, which is where i believe the Hard Drive is. I've looked online and this seems to be a sign that the harddrive is dying.

Yeah, the problem has been solved.
Unfortunately, the solution is buying a new storage device.
So if you're having these issues, i tried almost everything consumer possible, that's free anyway, and the hard drive was just too faulty to work properly. So backup all your stuff whilst you still can.
I bought an SSD for around £80, only 120 gigs of storage, but i have iTunes Match so i don't need to have my films and music downloaded.
If you're very mobile with your laptop, then i suggest getting an SSD. Lugging about a laptop with a storage device with moving parts is very very risky.
As soon as i got a new storage device, everything was back to normal. It was like it was new again.
Anyway, sorry i can't give you a free solution, but it's the only solution i got.

Problems With Hardware Macbook Pro 13" Early 2011

Similar Messages

Maybe you are looking for