Problems with IE 11 after the installation of KB2919355

Since the installation of update KB2919355 last night, my IE11 (and mail app and weather app) no longer go online althought the wireless and broadband are fine. Spotify appears to work. Any suggestions?

Hi,
How about your problem now? If problem persists, firstly, please check if you enable proxy in IE. If so, disable it.
Secondly, please try to reset IE for test.
Roger Lu
TechNet Community Support

Similar Messages

  • Problem with iWeb 09, after the publication in a local file.

    *Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
    After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
    Please help me.

    I want to activate the comments, it doesn't work neither.
    The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.

  • Has anyone experienced a problem with FB posting since the installation of iOS 6?

    Since the installation of iOS 6, I noticed that when I post a photo on FaceBook it does not show that post using my iPad or iPhone. I posted using my iMac and within seconds it showed up on two devices mentioned above. Please help.

    Hello,
    I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch/Ipad/Iphone/Ipod Classic, so I will try to find a solution to your problem.
    Do the IOS update (the one that is the latest)
    Reset All Settings: SETTINGS>GENERAL>RESET>RESET ALL SETTINGS
    Use it until it dies (automatically shuts off)
    Plug into Charge
    Leave it 1.5 hours or longer after it reaches 100% --> Undisturbed (preferably overnight)
    Give it a few days to Calibrate
    This has helped me on my Ipod Touch 4th generation, running IOS 6.0.1
    Hope that helps!
    If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
    Cheers!
    Pizza98704

  • Problem with installing programs after the new update.

    I am having a problem with mounting downloads. I tried installing a download and in the dowload manager it says the disk could not be mounted about 2mins later i get a warning telling me the device is not configured. I had the same problem as everyone else not being able to get past the frozen screen. I resolved this using the disk utility on the install disc. I am wondering if this had something to do with my mounting problem. I would love some help.
    Macbook G4   Mac OS X (10.4.9)  

    Others have reported the same experience, so you're not alone. The consensus seems to be booting into safe mode and mounting from there.
    See the following macfixit.com article for step-by-step info:
    http://www.macfixit.com/article.php?story=20070318234629161
    Dennis

  • Before mountain lion was installed on my mac it was running great and no problems at all and after the installation everything and i mean everything is super slow!!!! its frustrating. help please.

    help

    First, back up all data immediately, as your boot drive may be failing.
    Launch the usual set of applications you use when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. What approximate values are shown for Reads in/sec and Writes out/sec?
    Step 2
    You must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
    Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

  • TS1398 I have never had a problem with Apple. After the 7.02 update, my Wifi grayed out and would not turn on. Now my Wifi turns on but it will not connect. I even typed in the name and it still won't connect.  I have tried all of apple's solutions.

    I have tried all the solutions apple has offered online. I will not reset my phone to factory settings unless it is a last resort. What is Apple doing to fix this? I had my last Iphone last for more than 2 years and I hve had this one less than a year. My Wifi was greyed out and now it's on but won't connect or locate any networks (but if I keep switching it on and off it will freeze on me again). Does Apple have plans to fix this problem because I refuse to purchase a new phone?
    Are there any other new solutions to try in fixing the Wifi that doesn't require freezing or heating up the phone or switching to airplane mode and resetting the network settings as well making sure it's up todate or changing the apostrophe in the phone's name? My phone has never been dropped or damaged. Everyone around the world seems to be having this problem and Apple does not seem to be making a move to fix it? I use this phone for everything and 4g will only last so long before I reach my monthly limit. Please help!!!!!!!!!

    that makes no sense... it was only doing an update... if that's the case it should have promted me to back up first if this is even possible... there is a program that says it can recovery anything that hasn't been written over yet.. so would this not work? http://www.iphone-data-recovery.com/iphone-data-recovery.html   or would the apple store be able to recover it??? i've done plenty of data recovery on computers... why wouldn't it be possible on an Iphone... does apple seriously not care about thier customers at all??? how about thier employees that are gonna get more than an earful tomorrow when I walk in there store??? No wonder samsung paid 2 million to apple in pennies when they got sued... (how does it feel to be screwed with apple?!)

  • My apple ID was the original without the email extension.  It caused problems with ITunes conversion after the last upgrade.  Tech fixed that issue but my MacBook defaults to the old ID.  Even though I have a new ID it defaults to the old.  iTunes is ok.

    How do I change my Apple ID, when it defaults to an old ID and ITunes is accepting another ID?  The IDis very old and does not contain an email extension.  I had a problem because of that earlier this year in my ITunes account and Apple fixed it.

    Get in touch with Apple again -> http://www.apple.com/support/appleid/.
    Good luck,
    Clinton

  • Problem with Windows XP after a driver instalation

    Hi. I have a Lenovo SL400 with Windows XP. So, today I installed a few drivers from the Lenovo website because the volume and Lenovo Care keys and the bluetooth were not working since I changed to XP. After the installing process, I restarted my laptop and now just when its about to open the window to entet my password I get this blue screen for around 1 second and then it restarts itself, to do the same over and over again. The blue screen shows a four line message saying there is an error and some numbers. I have tried every option in the F8 menu and got nothing. Help me, please, I'm desperate :s

    my friend isten carefully:
    i have a g500,in which i tested a xp clean install(both x64 & x86 versions of xp*)(service pack 3 for the x86 version*).
    all the features work EXCEPT:when i install the wireless/bluetooth i start to receive the bsod(blue screen of death)
    i assume there is a VERY big issue(incompatibility) between the "high speed"(4.0 HS)adapter which is plugged in in this machine(and i also assume you have the same problem on your model).
    thing is........this adapter cannot work on windows xp,because:the intel chipset setup&the intel management engine interface setup have both tell your machine to work with specific "rules"(after the installation of these mentioned packages).
    that means,your system works fine,untill you try to install the bluetooth/wireless driver!
    after this installation,you receive this blue screen because the driver might be supossed/planned to work under windows xp,but the wifi/bluetooth adapter might NOT be working after the specific intel setup!..and that is a huge bug (in my opinion always).
    there is a workarround i think,but it demands that you actually must DOWNGRADE the motherboard setup(intel chipset drivers)or transform it to sth else,rather than what it is.
    the above has a result that the machine "sees" the usb ports as "generic"(...if i remember well)and then you can install the wifi/bluetooth set up normally.
    the whole problem stands on what i just mentioned:the wifi adapter is plugged under "internal usb" WHICH HAS TO WORK AS 3.0, BUT usb 3.0 IS NOT supported under win xp(or vista)!!!!!..so that's why the driver you(...and me)installed is the CORRECT ONE(according to the manufacturer)but THE MOTHERBOARD ON WHICH it is installed is NOT the suitable one(after the chipset setup installed of course!)
    Hope what i wrote helps everyone(plus Lenovo .....TO FIX IT!)

  • Has anyone had a problem with their imac because the power company installed a smart meter which broadcasts the readings to the company?

    Has anyone had a problem with their imac after the power company--in my case Pepco in Washington DC--installed "smart meters" which read the meter and transmit the data via wireless?  I've had trouble and when I move the imac downstair it disappears. Help!

    barryfromwashington wrote: 
    would putting up a metal shield by the meter help?
    It might, as long as the shield is grounded. Metallic (such as copper) window screen is often sufficient.
    As mentioned, it would not hurt to file a complaint. The burden of proper shielding should probably belong to Pepco. Among other things, the FCC frowns upon RF leakage and its interfereing with radio communications. Besides, Pepco probably would not want you to affix a shield around their gear - liability issues, etc.
    You could experiment by temporarily hanging a shield-screen on the inside of the wall, behind where the meter transmitter device is located, and see if there is any beneficial change.

  • Problems with ITMS Videos after 1.1 Update

    OK, so there are lots of posts about video problems on 5G ipods after software update 1.1 and what encoding methods were used etc etc.
    After updating my 60GB iPod to 1.1 all my videos, including those purchased from the iTunes Music Store, suffer from audio problems.
    The video playback is fine, no freezing like others have mentioned, but I get loud popping and clicking sounds on the audio, particulalry at the start of a clip.
    Has ayone else experienced problems with video sound after the 1.1 update?
    Restoring to software 1.0 resolved the problem so there is definitely a problem with 1.1 and ITMS content.
    Apple need to sort this out. Fast.

    I foolishly did the 1.1 upgrade to my 60G iPod. I found that, as we all know by now, that all ov my videos that weren't from Quicktime Pro or purchased through iTunes hang after about 30 seconds, and then continues without any audio. But, the really obnoxious part is that my videos that I converted via QuickTime Pro suffered from very strange audio artifacts. These would fall into the category of clicks, purrs, warbles and other strange noises in addition to the audio that is supposed to be there. That pushed me over the line, and I "downgraded" my iPod back to release 1.0. I did the "restore" to completely erase my iPod and then re-loaded it from iTunes. I had already upgraded iTunes, and it has no problems with my now-restored-to-version 1.0 iPod. By the way, you have to edit a system file in order to do the downgrade: Put the ipod in harddisk mode. Edit the file (hidden folder and file) \iPod_Control\Device\SysInfo Replace the line that have the word "buildID" with this line:
    buildID: 0x05908000 (6.0)
    Then run the original iPod Updater to put 1.0 back onto it. This will leave you with the "feature" that any video that you change the Video Kind to TV Show will not show up on your iPod unless it's in a Video Play List. I actually like this, as it keeps the Video list from being cluttered up.
    Sony Vaio PCG-U1   Windows XP Pro  

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

  • Has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

    has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

    fair enough.  No need for any unnecessary posts either.  You issue had been addressed ad nauseum already in this forum had you bothered to search this forum (as forum etiquette would dictate) before posting.
    In any case, I hope that your problem was solved.

  • Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message The server responded with \ 'HTTP/1.1 409 Conflict \'. can someone he

    Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message
    The server responded with \ 'HTTP/1.1 409 Conflict \'.
    can someone help me

    Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message
    The server responded with \ 'HTTP/1.1 409 Conflict \'.
    can someone help me

  • I can't install wmpfirefoxplugin at Firefox 4, It show "The installer has encountered an unexpected error installing theis package. This may indicate a problem with this package. The error code is 2755.

    The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2755.

    Although you're getting a different error message, perhaps try the procedure from the following user tip:
    "The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

  • The installer has encountered an unexpected error installing this package.This may indicate a problem with this package. The error code is 2869

    Hi,
    I am getting error "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2869." while installing SAP B1DE.
    Note:
    Downloaded the B1DE from B1DE:SAP Business One Development Environment Tools
    Using Window XP , .Net 2008, SAP B1 8.81 Version
    Company Name, Contact Person, Namespace all were given while installing. All of its length is less than 8
    Any help is appreciated.
    Thanks in advance.
    Parvatha Solai.N

    Hi,
    Try post a comment in B1DE 2.0.1 new version! blog.
    Beni.

Maybe you are looking for

  • Green vertical line on right side of my final .mov?

    I've exported a custom sized, 4:3, .mov file via Compressor. The final file has this bright green line running vertically down the right side of the frame. Any ideas how to remove it? I've run into this before - seems to happen inconsistently. Thanks

  • Need help ASAP...iPhone activation problems

    Today i bought two verizon iPhones from the apple store. I activated one just fine but I'm having problems with the other one. I used the upgrade for one of my lines on the account to purchase the other phone. I actually bought this for a friend who

  • Customer direct input

    Hi,        I'm having a problem loading customer data  using program RFBIDE00 & tcode XD01.The created session is running successfully till I encounter screen no 210 in pgm: SAPMF02D. The problem I have is that the batch input session created by RFBI

  • Putting someone on the cc: line of an email notification

    Putting someone on the cc: line of an email notification For email notifcations, how do we put people in "cc" line?  This is important particularly, for example, when line managers have delgated their authoritiy to others.  In this instance, presentl

  • Question about FCP and Varicam

    Hi everyone- I'm about to start editing a film. I'd like to use my FCP system. The producers are thinking they want to bring in all the footage in the native varicam format rather than downconverting to DV so they can save money by not having to make