Problems with installation I-200

Hi to all! I'm new in Adobe family.
I have 2 problems:
I've installed Muse CC, but... problem number one...error "I-200": what can i do?
I've uninstalled Muse from pc, deleted all folders, restarted my pc...and now in Adobe Application Manager (problem 2) i can't re-install Muse, it seems like installed...
Please help me...! thanks!!!
PROBLEM N°2 = solved.
PROBLEM N°1= The error I-200 is already present

Hi Gallozzi,
Please refer to the following article :  http://helpx.adobe.com/muse/kb/unexpected-error-occurred-i-200.html
Regards,
Aish

Similar Messages

  • Problem with installation on PIV

    I have a problem with installation Oracle 9.0.1 database on my
    RedHat 7.1 and 7.2 dist.
    My machine is PIV 1.4/768MB/40Gb
    On PIII 933/786/40 everethin works fine.
    Where is solution for my problem ??

    Hello,
    PIV isn't problem on Linux. (I am tried)
    What is your problem ?
    regards
    peco

  • Problem with installation - Augigy

    I have a problem with installation on 32bit Vista. Im downloaded newest drivers (SB24_VTDRV_LB__04_0077) and when the installation start, i receive message "A higher version of driver is found in your system, installation will abort.".
    Help?

    same problem here, is there a possibility zu force installation?

  • Problem with installation and activation

    Hi, I have a problem with the installation of Adobe Muse.
    I had a free 30-days trial, when it was over I bought the product ($ 13 per month), 
    I installed the program again and I see the same window with the finished Trials
    and it requires a serial number and does not allow to enter the program.
    I installed the program on your PC wife without any problems, but I can not install it on a laptop.
    I have a laptop with Windows 8 operating system.
    What I've done:
    1. Uninstalled the free program,
    2. check the connection to the Internet,
    3. has installed a new program from the official website adobe.com,
    4. Remove the line for the activation of the hosts file and resave the file,
    5. turned off the brandmower,
    6. rebooted.
    I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
    Please help me at [email protected]

    I guess this stuff helps me
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
    thanx
    >
    2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
        problem with installation and activation  created by Prabhakar.Kumar
    >> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
    >> Adobe Muse CC* - View the full discussion
    >> <https://forums.adobe.com/message/6619532#6619532>
    >>

  • Problem with installation of Adobe Air 2.6

    Hi,
    I've got a problem with installation of Adobe Air 2.6 under Mageia 2 Linux. The installation stops with an error. Here's the install.log:
    [Adobe AIR Application Installer:8550][ERR] Application Installer end with exit code 7
    [setup:11894][INFO] Runtime Installer begin with version 2.6.0.19170 on Linux x86
    [setup:11894][INFO] Commandline is:
    [setup:11894][INFO] No installed runtime detected
    [setup:11894][INFO] Relaunching with elevation
    [setup:11894][INFO] Launching subprocess with commandline /tmp/air.HmUPbw/setup -ei
    [setup:11894][ERR] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="/tmp/air.HmUPbw/build/opt/Adobe AIR/Versions/1.0/Resources/rpmbuilder error : symbol not found: parseSpec, /usr/lib/librpmbuild.so: undefined symbol: parseSpec error : + umask 022;+ cd /tmp/air.HmUPbw/build;+ '[' 1 -eq 1 ']';+ '[' 1 -eq 1 ']';+ '[' 1 -eq 1 ']';+ exit 0;+ umask 022;+ cd /tmp/air.HmUPbw/build;+ '[' /tmp/air.HmUPbw/build '!=' / ']';+ rm -rf /tmp/air.HmUPbw/build;++ dirname /tmp/air.HmUPbw/build;+ mkdir -p /tmp/air.HmUPbw;+ mkdir /tmp/air.HmUPbw/build;+ '[' 1 -eq 1 ']';+ true;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/opt/Adobe AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe;błąd: Nie odnaleziono pliku: /tmp/air.
    HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR/Updater;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR/crypt/config.xml;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/opt/Adobe AIR;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR/Updater;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR/crypt/config.xml" errorID=1]
    [setup:11894][ERR] Runtime Installer end with exit code 7
    How can I solve this problem? Thanks in advance for help.

    I'm not certain that Mageia 2 Linux is supported.  This Release Notes page and this Install Help page don't mention Mageia, just
    Fedora Core 12, Ubuntu 9.10, OpenSUSE 11.2.
    Roy

  • Hey, I had met a problem with installation. Can any one help me?

    Hi everyone, I'm an user of Windows 7(64 bit),
    I had just download "Master Collection CS5.5"
    Everything are fine but Adobe Acrobat Professional can't install on my computer.
    There are the details..:
    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 1 warning(s)
    WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
    ERROR: Install MSI payload failed with error: 1603 - 安裝時發生嚴重錯誤。
    MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed
    Thanks

    Re: Hey, I had met a problem with installation. Can any one help me?
    This worked for an English version and the concept should work with all Adobe programs - new or old (hopefully in any language). My guess is that you have/had an older version of Acrobat/Reader on your computer hard drive that needs to be *completely* removed first. Uninstall the new (and any old) Acrobat; then try using the "kb2..." guideline link below before reinstalling the new Acrobat. I am including the lengthy instructions in order to help others with more extensive installation problems. Good luck!
    I live on a fixed income and use CS for a hobby. I had problem installing Adobe Creative Suite (CS1) to Windows 7 64-bit Pro on my new computer. Also installed Adobe Photoshop LR3. What I learned: All Adobe products (Flash, Acrobat/Reader, Photoshop, Creative Suites, etc.) leave a VERY pervasive footprint on your hard drive. Logic finally worked for me.... think of building a house; there is an order you have to do things in. First, you have to clean the area before laying the foundation; then you have to build the framework before you put the roof on. You cannot install an older program over ANY newer program; and you will sometimes have a problem installing a newer program containing Flash, Reader, etc. unless you "erase" the older versions of Flash, Reader beforehand. If installing older programs, do a Custom/Manual install; do not install older versions of Flash, Reader, etc.  packaged with your Adobe software.
    SOLUTION (not easy, but it works):
    I first tried this; it did not solve my problem (but, if applicable, may help others).  http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Win dows
    Before doing anything, make document and any database/presets/cache back-ups beforehand (keep notes on their designated location*); manually create a System Restore point. (Be prepared to reinstall Windows if necessary - I didn't have to.)
    Completely and meticulously eradicate (clean) your hard drive of ALL Adobe programs [uninstall, remove remaining folders, and remove only the registry entries that have the Adobe name attached (unless you are an expert and fully understand the other entries)]. Use this as a guideline  http://kb2.adobe.com/cps/400/kb400769.html
    Do a Custom/Manual reinstall of all your Adobe products *in order of release dates* (OLDEST first).... do not include Reader, Flash, etc. If your CD will not automatically run at this point, click "Open folder to view files" (use Computer/Windows Explorer, if necessary). Click "Adobe Creative Suite (or your desired program) ==> Setup.exe" (IMPORTANT: Make sure that Reader, Flash, etc. are unchecked.)
    After each of your desired Adobe programs are installed, test to insure they boot up. Then download the latest Reader, Flash, etc. apps and install them (I did this in order of release date - oldest first). Do test boot(s) again.
    Copy/Paste your document and any database/presets/cache back-ups into the appropriate folders (*this will vary depending on your programs and your filing system).
    It has been four weeks and all my Adobe programs work flawlessly - system is stable, no problems!

  • ITunes will not up date get a messge saying problem with installer packge

    itunes will not up date get a message saying problem with installer packge

    TRy the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Problems with Installer application

    Hi!
    Lately I've been having problems with Installer with several packages. Some pkgs install just fine, but others fail whenever they try to run some preflight or preinstall scripts.
    My mac is new MacBook Pro Core 2 Duo shipped with 10.4.8. I think these problems might have started after some late Security Updates.
    I've been doing maintenance tasks prediotically as well as repaired permissions and disk in single user mode. I've also tried to copy Installer from my Tiger install DVD's but with no luck.
    Either system.log, console.log nor CrashReports don't show anything. Installer's own log just announces that install failed while running presomething-scripts. But when I run these scripts manually from Terminal, they work just fine without any errors.
    I'm hopeless. I wish won't have to see the day coming when I'll have to do that so well known regular windows-like format and reinstall procedure with OS X. Sadly there's several packages I need to have installed, so if reinstall is the only solution please throw some backup and restore tips at me.
    With kind regards,
    Joona

    The first package I noticed this problem with was DivX for Mac installer. The Installer's log pointed that installation failed while running the preflight script. The script is pretty long, but mainly just removes older version of DivX libraries and applications and when I run it from the shell, it works just fine.
    I've also tried downloading it again along with another versions, but all the Installer fail at the same point. I've also tried to find some help to this problem from their forums, but it seems to me that I'm the only one having this problem.
    Another package which I found failing is Missing Sync for Windows Mobile. I just ordered HTC TyTN -phone and tried to get Missing Sync working. Missing Sync itself installs correctly, but there's a application which comes bundled with MS called Mark/Space Notebook. The installer is multipackage installer and during the installation of M/S Notebook it fails while running preinstall script. The preinstall script is really simple, like this:
    #!/bin/bash
    rm -rf "/Applications/Mark:Space Notebook.app"
    I haven't yet tried these packages on other Macs, but I'm positive they will work just fine. I believe that the problem must be either the Installer app, or something in my shell environment that makes it fail. Any ideas what could it be?
    When searching help from this forum first to this problem I ran into post that indicated the same problem and the fix for that was recreating admin/root account. Although I am pretty familiar with *BSD and UNIX systems, I didn't quite get what was meant by that. As far as I know the root account can't be easily recreated?

  • Dreamweaver CS3. problem with installation

    Greetings...
    I have some strange problems with installation of Dreamweaver
    CS3: when I'm running setup -- it shows "initialization" window and
    then shows message that at one time I can install only one adobe
    produc. But there is no unfinished installations...
    Also this setup adds it's button to "Add or remove
    programs"...
    What should I do?
    Best regards...

    >I run the ADBEDRWVCSE_WWE.EXE 292.289 KB
    Where did you get this file?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "ABK54" <[email protected]> wrote in message
    news:fojl9t$e10$[email protected]..
    >I run the ADBEDRWVCSE_WWE.EXE 292.289 KB (for trial
    version of Dreamweaver
    >CS3)
    > and after I have try to run the Setup.exe file.
    > After 2 sec open a window - preparetion of Adobe
    Dreamweaver CS3 -
    > ,transer
    > some files and open a window Loading setup... in 2 sec
    close this window
    > and
    > after nothing!!!
    >
    > I need your help please
    > tks
    >
    >
    > sorry for the shuting
    >

  • Problems with installation / de-installation of WAS AS 6.20

    Problems with installation / de-installation of WAS AS 6.20
    Hello,
    is anyone able to help me ?
    The installation (started from setup on cd-1 kernel) of sapdb ends by 30 % with following massage:
    start massage:
    Warning: adaextractlctool_nt_ada InternallnstallationDo
    SAPCAR returns with error 29.
    Error:  adaextractlctool_nt_ada InternallnstallationDo
    Phase failed.
    Error: Main {}
    Installation aborted.
    end massage.
    massage above percent-banner on the left down-side:
    no R3SETUP connected.
    In the dos-window in background have been a lot of status-lines during extraction of sabdb-files. Also there have been a successful-massage:
    "installation of sap db server finished successfully...." l.
    The massage above was shown direct after the massage: "Extracting SAP DB Tools Software"
    The Loop-back adapter is already installed (was the first ein did) and the files in win-folder 'hosts' and 'service' are correct (IP and so on)
    my system:
    Acer Aspire 5100
    Ram 1 GB
    HD 160 GB (140 GB frei)
    Win XP prof.
    How can I solve the installationproblem ?
    I think, I have to clean my system before starting a new installation-try, because there are already entries in my win-start-button:
    a) SAP DB Manager (but behind only a html-Link / no entry DeInstall)
    b) a second entry  SAP Front End (also behind just a html-link / no deinstall-button)
    Under system/controll panel -> software are no entries. So, I`m not able to deinstall the sapdb by win-controll-panel.
    And what is with registry-entries ? How can I delete the right entries in the registry. I dont know how to find them.
    Another way I tried: on the  SAP-CD 1 (kernel) with the file resume_setup.bat I get the same abort during installation I described at the top.
    Please, I need help, because I need the system as 6.20 for a trainning.
    Much thanks,
    Regards, Lars Stolpe
    MfG Stolpe

    obsolete question ...

  • Provisioning Profile - problems with installation our app build on devices

    We have problems with installation our app build on few devices. There are all in Provisioning Profile, but we don't know why we can't install the build on some devices. Any ideas?

    Apple products needing Apple love/support (athough using Adobe to compile to Apple-code may be an obvious concern since nothing beats native-code)
    The app still however requires code-signing in the correct manner - personally, the more the merrier.

  • Problem with Nokia Asha 200 apps

    Hello guys,
    I am using Nokia Asha 200 and i am quite satisfy with this phone. The only drawback that i can find is that i cannot ue it social prebuild apps, like Social and i cannot use the e-mail app as well.
    When i open them and accept the license, i am waiting for the software to connect to internet and update it self's, but this never happen. I tried to wait for the apps to finish with there updates but after 10 minutes of inactivity it become clear that it will never happened. 
    In comparison when i am using the Nokia Web Browser i don't have any problems with opening web pages. The difference between the browser and the apps is that when i browse i see on the top left part of the screen the "E" symbol which indicates that the phone is connected to Edge network, but when i use Social, E-mail or even other apps i had downloaded from Ovi store i am not able to use them. For instance most apps i had download indicate me network connectivity problems. The only app i can use with my 3G internet is Nokia browser.
    My software version is:10.58.
    Thanks in advanced,
    Alex

    lobiaboy wrote:
    Pls my nokia 200 social network has been broken and my email is not working is just dere pls i need a help
    You have two options to resolve the issue:
    Update the phone's software.
    Ask for the configuration settings from your network provider.
    Before updating, use Nokia Suite to back up your phone. You can be sure that your contacts, messages, calendar entries, tasks, web feeds, and other important stuff are backed up safely. The contents of your phone memory and memory card, such as photos and videos, are safe and won’t be affected during the update.
    You can use the link to download the Nokia Suite: www.nokia.com/nokiasuite
    Connect the phone you want to back up to your computer with a USB cable. On your phone, select Nokia Suite (or PC Suite) and then select OK.
    In Nokia Suite, click Tools then Backup. Nokia Suite shows you a list of the content types that you can back up and prepares a list of information that can be backed up.
    Select the information that you want to back up. If you want to change where the backup file is saved, click Browse and choose another location. If you have a lot of music, photos or videos on your phone, including them in the backup will cause the backup process to be slower.
    Click Start to begin backing up. Do not disconnect or switch off your phone during the backup. If you need to stop the backup, click Stop. Nokia Suite will reach a safe stop point and will then stop the backup.
    Click Finish to close the window after the backup is complete.
    To update your phone software, you can follow the steps below:
    In Nokia Suite, select Tools then Software updates. If an update is available for your phone, you can see it here along with any other updates that are available.
    Click Install to start the installation. During the installation, Nokia Suite takes you through the following steps:
    Get started
    Back up (recommended)
    Install
    Restore (optional)
    Finish
    Please do not disconnect your phone until the installation is completely finished. Doing so might cause damage to your phone or result in its contents being lost.
    Hope this helps.

  • Problem with installation CF7 on W2K3

    //Original message //
    Здравствуйте,
    отдел
    поддержки
    Macromedia(Adobe). //
    // Проблема:
    При
    установке
    ColdFusion MX 7 на
    операционную
    систему Windows 2003
    Server на //
    // любой
    web-сервер
    (пробовал
    на Apache и на IIS) в
    лог-файле
    следующее: //
    // Installation: Successful with errors. //
    // 1736 SUCCESSES //
    // 0 WARNINGS //
    // 1 NONFATAL ERRORS //
    // 0 FATAL ERRORS //
    // Web Server Connector Configuration Error //
    // Status: ERROR //
    // Additional Notes: ERROR - JNDI port 2920 for server
    coldfusion//
    // is not active //
    // Раньше у
    меня
    программа
    была уже
    установлена
    на Windows Server 2003, но
    произошла //
    // какая-то
    ошибка и
    после я
    переустанавливал
    и
    программу
    и OS - никаких
    результатов.
    // Может
    быть
    необходимы
    какие-нибудь
    настройки? //
    // ColdFusion
    устанавливался
    на чистую OS
    без
    каких-нибудь
    программ.
    Без
    файрволла
    и //
    брандмауэра.
    На windows XP
    ставится
    отлично,
    без ошибок.
    // Если ColdFusion не
    поддерживается
    на Windows Server 2003,
    тогда
    почему
    раньше он //
    // работал? //
    // C глубоким
    уважением
    всем
    сотрудникам
    Macromedia и Adobe,
    Шильдяков
    Алексей из
    России. //
    // [email protected] //
    // Translated message //
    // Hello, a department of support Macromedia (Adobe). //
    // Problem: At installation ColdFusion MX 7 on operational
    system Windows 2003 Server on //
    // any web-server (tried on Apache and on IIS) in a log-file
    the following: //
    // Installation: Successful with errors. //
    // 1736 SUCCESSES //
    // 0 WARNINGS //
    // 1 NONFATAL ERRORS //
    // 0 FATAL ERRORS //
    // Web Server Connector Configuration Error //
    // Status: ERROR //
    // Additional Notes: ERROR - JNDI port 2920 for server
    coldfusion//
    // is not active //
    // Earlier at me the program was already established on
    Windows Server 2003, but //
    // there was any mistake and the ambassador I reinstalled
    also the program and OS - //
    // nothing results. It can be necessary any adjustments? //
    // ColdFusion it was established on pure(clean) OS without
    any programs. Without //
    // firewall and a fireproof wall. On windows XP it is put
    perfectly, without mistakes. //
    // If ColdFusion it is not supported on Windows Server 2003
    then why earlier it(he) //
    // worked? //
    // Deep respect to all employees Macromedia and Adobe,
    Shil'djakov Alexey from Russia. //
    // [email protected] //
    // translated by X-Translator of PROMPT:
    http://www.prompt.ru and online
    translate in //
    http://www.translate.ru //
    //// Sorry for possible mistakes while translating ////
    ///// [email protected] /////

    quote:
    Originally posted by:
    <newbie />
    Make sure IIS and CF is running and then run wsconfig.jar to
    configure
    IIS. Do a search on your hard-drive(s) to see if this jar is
    exists. Traverse
    to that directory using a command prompt and type:
    prompt>java -jar wsconfig.jar
    I installed Apache Server 2 and uninstalling IIS. Why I doing
    that CF will work in Apache2

  • Problem with installation on Fedora core 5 [OCRUTL]

    Hi
    We have problem with instalation XE on Fedora C5 64bit (RAID 10).
    In css.log we have errors:
    Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
    [  OCRUTL][4143179440]u_set_comp_error: Parameter was NULL
    [  OCRUTL][4143179440]u_set_ocr_error: Parameter was NULL
    2006-08-03 11:49:14.794: [  OCROSD][4143179440]utgdv:2:ocr loc file cannot be opened
    2006-08-03 11:49:14.794: [  OCROSD][4143179440]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
    [  OCRUTL][4143179440]u_set_gbl_comp_error: Parameter was NULL
    2006-08-03 11:49:14.794: [  OCRRAW][4143179440]proprinit: Could not open raw device
    2006-08-03 11:49:14.794: [ default][4143179440]a_init:7!: Backend init unsuccessful : [33]
    [  OCRUTL][4143179440]u_set_ocr_error: Parameter was NULL
    2006-08-03 11:49:14.794: [ CSSCLNT][4143179440]clsssinit: error(33 ) in OCR initialization
    While installation there are no errors. After trying to start oracle-xe (manually or after reboot) nothing happens (only errors in log files).

    you can ignore those errors, everyone gets them
    is there a specific problem you are having

  • Problem with installation of Adobe Flash Player on mac

        Hi, i have a macintosh with OsX Yosemite 10.10.2 and i can't update the software to te last version. The download always stop at 20-30%. It's not a problem of my internet connection. I tried to uninstall e reinstall flash player, but i have the same problem, with the difference that now i neither have the software... What can i do? Thank you!

    Hi,
    Ok.  So I found this and it worked:
    1.  Re: Flash download freezes at 25%. What will help?
           Jeromie Clark     Mar 18, 2015 5:00 PM  (in response to Geri J)   
    Please use the offline installer:
    http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
    Download the install package from this link.  Double-click to open it from your downloads folder; when you see the red "install" folder, right-click it and select "Show Package Contents"; click on the  "Contents" folder; then click on the "Resources" folder; then double-click on the "Adobe Flash Player.pkg" file. The installation will start.  It worked for me.... FINALLY!! I hope it also works for you.

Maybe you are looking for