Problems with installation of system and support files with Labview 5.1 on Windows NT.
I make installations disks with Labview 5.1 on Windows NT and I need to add some system files and other support files. When I'm in App Builder I choose them in "Add support files" and I mark their "custom directory destination" (c:\winnt\system32, c:\est\base) but, when I test the installation I see that files don't save in this directory, they save in 'C:\c\winnt\system32' and 'C:\c\est\base'. How can I solve this problem?
Jorge,
I know there were some problems with the LabVIEW 5.1 Application Builder that were fixed in the LabVIEW 5.1.1 Updater. I recommend you download that update to see if this fixes the problem. Also, double-check to make sure you have typed the file paths correctly. If you continue to have problems after installing the 5.1.1 updater, please let me know, and please attach your .bld file so I can examine it for any problems.
Thanks for your patience on this issue, and have a pleasant day.
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Similar Messages
-
Convert executable and supporting files to msi
Hello all,
Wanting to know if it is possible, or if anyone has tried, to roll a labview executable and supporting files into a .msi microsoft installer package. Wanting to do this for its auto exection and encryption. I have attempted using third party applications like "Advanced Installer" and Altris wise package studio with no avail. I found the following old post describing this exact problem using a different third party applicaiton and labview 6.1. I am currently running Labview 2011 professional.
http://forums.ni.com/t5/LabVIEW/Repackaging-Labview-using-Veritas-Wininstall-fails/td-p/89442
I know that Lab-windows can be used to package a .msi installer but I do not have access to it nor am I trained to use it.
Just wanting some information, any information, on how to make this happen.When you built the exe in the project, you should have noticed the option to create an installer. Fully documented in the LabVIEW help.
-
Dump Previous Systems and Damaged Files?
I just upgraded to Tiger (10.4.6) from 10.3.9. I have two new folders on my Finder now, Previous Systems and Damaged Files. As I have only 25 GB of an 80 gig hard drive left, is it OK to dump them?
eMac 1.24 GHz Power PC G4 Mac OS X (10.4.6)With 25 GB remaining you should be in no immediate danger of filling the hard drive and killing the system, so you can take your time checking out 10.4.6 before you toss the Previous Systems folder. You can look it over and decide if there are any files in there you want to still use. That said, I kept the Previous System folder around on my eMac after updating for all of maybe three days, so yeah, you can toss Previous Systems.
I'd be more concerned about a Damaged Files folder. I've never seen thaat as part of an upgrade, it suggests there may be directory or physical disk damage. If you open Disk Utility, what does it show for your hard drive's SMART status? If you boot from the Tiger install disk and run Disk Utility> Repair Disk from the Installer menu, does it report any problems? What sort of files are in the Damaged Files folder? -
Hi,
I am facing the problem in opening the word and excel files received through email in my MS office professional 2013 paper licence, Microsoft Windows 8.1 enviornment. please help in this matter
regards
Rajeev Bhagwat
Administrative Officer-I
Purchase and Store Section
UGC-DAE Consortium for Scientific Research,
University Campus, Khandwa Road, Indore (M.P.), India.
Telefax-+917312361546I should further say the files I sent are .xlsx and .docx files. They look fine my end and I send such files all the time without problems.
However, I did try to cheat by going in via the Safari onto my 'live' online email account and the Safari automatically transfers them to winmail.dat files with the same result.
Ahh - have just been on using my PC this time and you are right, it seems that the service provider does the transfer and then when my outlook opens the file (on the PC), it must reconvert to .xlsx etc again.
Very strange.
Ergo, I guess the question should be how I open wimail.dat files ?? -
How do we embed projector and supporting files within an XCode project/app?
Many Director 12 developers would like to put their projects into the Mac App Store, and I'm one of them. It seems to me that the safest way to meet Apple's various requirements (sandbox, receipt validation, and whatever Apple adds in the future) is to somehow use Apple's own tool: Xcode.
Which web pages out there explain how to add/embed a Macintosh application (Director 12 projector) and supporting files (movies, casts, sound files, etc) within an XCode project and resulting app?
I got no obviously right results with Google searching. I might have chosen the wrong keywords to search for.
I searched this forum and found some posts about preparing for the Mac App Store, but those answers seem to be either out-of-date or very incomplete for this purpose.
Huge thanks to anyone out there who can point me in the right direction!So receipt validation should be implemented via an Xtra? Then I must hire a Xtras developer, because I don't know the C++ programming language nor Objective-C/Xcode.
Maybe I should ask that developer to implement this:
https://github.com/roddi/ValidateStoreReceipt
I must decide whether to have all the receipt validation logic coded in the Xtra, or simply have the Xtra access the receipt and then I would code all the receipt validation using Lingo. Perhaps having all that coded in C++ would be more secure against hackers, but I lack the technical knowledge to be sure. Doing the validation in Lingo would make it easy to change that validation Lingo code for each product I put in the App Store; Apple asks developers to change and obfuscate validation code, to make hacking more time consuming I guess.
I read a forum message somewhere here, that hinted third-party Xtras could create issues with code signing? Does anybody have experience with that?
Plus there is the whole issue of sandboxing. I think my apps will need no entitlements at all. Do I need to indicate that fact, somehow, somewhere? Some of my apps use the Lingo getPref and setPref commands, but I think that does not require an entitlement. I'm not doing anything special at this point, but might want to make use of Game Center and In-App purchases later.
And then there is this whole business:
http://forums.adobe.com/message/5755957#5755957
It seems to me that we on these forums should be discussing all these kinds of issues in detail. It is both very complicated and very important for the many Director developers who would like to publish to the Mac App Store.
I think Adobe could sell more copies of Director 12 to aspiring App Store publishers, if they contributed to their customers' understanding of these issues. But maybe the Adobe people don't have special knowledge on this topic. I fear that we are on our own. -
Problems with LabVIEW 7.1 and lock-in amplifier Stanford SR530?
Does has anybody had problems with LabVIEW 7.1 and the instrument driver for the lock-in amplifier Stanford SR530?
With LabVIEW 6 there are no problems at all, but with LabVIEW 7.1 it is impossible to communicate with the instrument.amr_attia wrote: (Private message, no need to private message)
My problem is to get the data out from the divice x and y readings . Can you help me
Here is the code and snippet. I had it from before. It reads Channel 1 and Channel 2 from the SR530, that is whatever the display is for Channel 1 & 2. You set the display manually or programmatically, I let you figure that part out.
Cheers,
mcduff -
Installation of .pkg and .mpkg files does not continue. Please help
1. Installation of .pkg and .mpkg files does not continue after password prompt. Please help if anyone have fix this issue. I tried repairing disk permissions but no change.
2. When I do the unlock to make the changes then again that lock does not allow me to unlock again for the particular permission like internet sharing
Mac Mini running OS X 10.7.5harrymash wrote:
1. Installation of .pkg and .mpkg files does not continue after password prompt. Please help if anyone have fix this issue. I tried repairing disk permissions but no change.
2. When I do the unlock to make the changes then again that lock does not allow me to unlock again for the particular permission like internet sharing
Mac Mini running OS X 10.7.5
What are you trying to install?
Pete -
Problem with AIR Bundled Distribution on Windows 7 (Error #5100)
We've just finished an application and have set up the bundled distribution for the Installation of AIR and the Application. It works fine on Windows XP, Vista, and too on MAC OS X.
On Windows 7 however, it doesn't install. It loads the installer, and gets to the stage to ask for user options (installation dir etc), and then after this when installing (both AIR and application) - somewhere, it dies with the following error (Error #5100)...
Sorry, an error has occurred.
And error occurred while uninstalling the application. Try uninstalling it again. If the problem persists, contact the application author.
Any solutions to this? Thanks.Hi,
Is it possible to get the application installer log?
Moved discussion to the Installation Issues forum.
Chris -
Problem with tv@nywhere plus on windows 8
hi
i have a problem with tv@anywhere plus on windows 8. i can setup the pvr plus app completely but when i open that and click on "watch and record dtv program" icon, i will see an error that says: "invalid class string!"
i think this problem should be for its driver because i'm using windows 8 64bit and the driver is for windows 7, i couldn't find an appropriate driver for windows 8 on MSI driver downloads, as matter of fact it didn't exist.
so what should i do for my problem?I'm afraid TV@nywhere Plus is a bit outdated for Win8. There is no update so far since 2010. Could be MSI won't add Win8 support if it would be anyway possible.
-
Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?
giadad,
It sounds as this issue:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:
https://forums.adobe.com/message/6854594#6854594
It has been described on this Adobe page:
http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/ -
I am facing problem with adobe illustrator cc in windows 8,it closes automatically after few secons,please help
[ link removed by moderator ]Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi? There is probably a trivial, easy way to get this info, but I have not yet found it! Thanks..
Or if you want to grab all the paths programatically, try the attached VI.
Open the top level that you want all the paths from and close all others, then open the
attached and run it. It will return an array of all the VIs that the VI
in question uses, including vi.lib VIs. You can filter these as well if
you like.
Ed
Message Edited by Ed Dickens on 08-01-2005 07:01 PM
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Attachments:
Get all paths.vi 29 KB -
Hi there,
I am planning to use Labview 2010 in a short time.
But before I'm going to use it I have some questions.
I know it is possible to run Labview 2010 in an XP environment. But is it also possible to, when running Labview 2010 on a XP system, to build a project to a version that is useful in a Windows 7 environment?
Or do I have to run Labview 2010, when I want to build a project that is useful on a Windows 7 system, on a system with Windows 7?
Please give me some information.
I hope to hear from one of you soon.
Regards,
Kenny
Solved!
Go to Solution.Is it possible to build a project with Labview 2009 on a Windows XP system, that is useful for a system with windows 7 on it?
Thanks.
Philippe B.
Certified Associate Developer / Dépt Moyens d'essais
www.ingenia-system.com -
Sequence of Installs of RTA and SCA files for GRC AC 5.3
Hello,
I would like to confirm the correct sequence of applying RTA and SCA files for GRC AC 5.3.
On ABAP Stack
1- Install VirsaNH RTA on ECC 6.0 System with SAINT
2- Install VirsaHR RTA on ECC 6.0 system which has SAP_HR
3- Install both VirsaNH RTA and VIRSAHR RTA on a system which is SAP HR
4- Install VIRSANH RTA on BI System. (There is no need of VirsaHR on BI system)
5- Install all Support Packages up to 10 or 11 for VIRSANH & VIRSAHR with SPAM
Next
On JAVA Stack
6- Install
VIRCC00_0.sca
VIRAE00_0.sca
VIRRE00_0.sca
VIRFF00_0.sca
7- Install VIRACLP00_0.sca
8- Then install VIRACCNTNT.SAR
9- Next install EP RTA VIREPRTA00_0.sca
10- Install all Java patches for the above components
Based on the above,
a- Plz confirm if the above sequence is right.
b- My question is can I install 6, 7,8, 9 with JSPM at once as one step?
c- Also can I install SCA files with JSPM first and then install RTA files on ABAP stack later?
d- Also we have BI system with ABAP & JAVA Stacks. Is VIRSANH sufficient for both ABAP & JAVA, or do we need an additonal RTA for BI JAVA ?
Thanks for your valuable inputs in advance.
Regards,
HaleemHi,
> 1- What is the UME of your BI Java stack ?
>
> Answer: We have installed BI JAVA, EP, EP Core, so we use SSO with EP and BI ABAP. So the portal is UME for BI Java stack.
>
Check below link which will answer your queries:
Java RTA for GRC 5.3
> 2- Check SAP Note 1174625 - Access Control 5.3 Java Support Pack Installation
>
> I checked the note 1174625, which says the following
>
> All of the sap.com/grc files have to be undeployed except the db and dictionary files for each component. The files that are NOT to be undeployed are:
>
> - sap.com/grc/ccxsysdb
> - sap.com/grc/aedict
> - sap.com/grc/redictionary
> - sap.com/grc/ffdb
>
> Since this is a GRC AC 5.3 install on a fresh Netweaver 7.0 EHP1 Java stack install, do I need to undeploy all the above components, before doing AC 5.3 install, as mentioned in the note.
>
This is used when you do upgrade your old GRC release to latest one. So if you are doing fresh install then you need not to do these steps.
> 3- Also this note 1174625 answers to most of my questions, but does not mention anything about VIRACCNTNT.SAR. Is >this SAR file installed on JAVA Stack or ABAP stack? Is there a OSS note on VIRACCNTNT.SAR?
>
This file contains Roles, Rules, functions for RAR, CUP, ERM etc. in txt files which you need to upload when you will do the configuration of GRC.
Thanks
Sunny -
Problems Post installation - Oracle 8i and Forms 6i
Hello,
This is with respect to the two issues I am encountering in Oracle. Kindly somebody help with these issues as it is urgent.
PLEASE GO THROUGH EACH AND EVERY POINT BEFORE ARRIVING AT A CONCLUSION
1. With the Post Oracle database installation
2. Oracle forms connectivity to the Oracle database (FORMS WAS INSTALLED PRIOR TO ORACLE INSTALLATION)
I will start with the 1st issue (Post Oracle database installation)
Steps A01
1. I unistalled an existing version 8.1.7 using the steps mentioned in the following link (http://www.oracle-base.com/articles/misc/ManualOracleUninstall.php)
2. I chose typical installation (default, all the rest of installation methods were default)
3. Gave SID as ORCL_DB
4. Created database by installation
5. connected to SYS using default password - no problem
6. Created another user usr01 and granted necessary privileges Was able to logon to the database using usr01. No problem
But if I do a restart of the machine and then I am encountering an error ORA-27101: shared memory realm does not exist after which I am unable to connect to the database.
##### (PLEASE NOTE THAT I AM ABLE TO CONNECT TO ORACLE FOR THE FIRST TIME WITHOUT ANY PROBLEMS. THE ERROR IS THROWN IF WE REBOOT THE MACHINE AND TRY TO CONNECT TO ORACLE) ###
The steps I tried to troubleshoot this
a. Checked the oracle network admin directory. All the config files are there (TNSNAMES.ORA, SQLNET.ORA, LISTNER.ORA)
b. did a tnsping
c:\tnsping ORCL_DB
NO PROBLEM WITH THAT. GETTING OK FOR THE PING
c. Checked the oracle registries.
Could find all these entries have the correct value:
ORACLE_HOME - C:\ORACLE
ORACLE_SID - ORCL_DB
ORACLE_BASE - c:\oracle
There were no extra slash or extra character with the registry entries.
Now the the post forms installation scenario
Steps A02 (FORMS WAS INSTALLED PRIOR TO ORACLE INSTALLATION)
1. Installed forms (directory c:\orant)
Steps A03
1. Copied the contents tnsnames.ora file entries from oracle\network\admin directory to the orant\net80\admin\tnsnames.ora file
2. Tried to connect to oracle forms (user : usr01, database : ORCL_DB).
Got error : ORA-12154: TNS:could not resolve service name
3. Created an environment variable : tns_admin with value c:/oracle/network/admin. Tried to connect again
Now getting another error : unable to connect to the destination : ora-12203 (unable to connect to destination)
I have installed forms and oracle in separate directories. Can somebody help to resolve these issues?
Thanks in advance
ChanayaPlease find the content of the alert logfile
Dump file C:\oracle\admin\PPDDEV\bdump\ppddevALRT.LOG
Fri Nov 04 17:47:05 2011
ORACLE V8.1.7.0.0 - Production vsnsta=0
vsnsql=e vsnxtr=3
Windows 2000 Version 5.1 Service Pack 3, CPU type 586
Starting up ORACLE RDBMS Version: 8.1.7.0.0.
System parameters with non-default values:
processes = 150
shared_pool_size = 52428800
large_pool_size = 614400
java_pool_size = 20971520
control_files = C:\oracle\oradata\PPDDEV\control01.ctl, C:\oracle\oradata\PPDDEV\control02.ctl, C:\oracle\oradata\PPDDEV\control03.ctl
db_block_buffers = 19200
db_block_size = 8192
compatible = 8.1.0
log_buffer = 32768
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
db_files = 1024
db_file_multiblock_read_count= 8
max_enabled_roles = 30
remote_login_passwordfile= EXCLUSIVE
global_names = TRUE
distributed_transactions = 500
instance_name = PPDDEV
service_names = PPDDEV
mts_dispatchers = (PROTOCOL=TCP)(PRE=oracle.aurora.server.SGiopServer)
open_links = 4
sort_area_size = 65536
sort_area_retained_size = 65536
db_name = PPDDEV
open_cursors = 300
os_authent_prefix =
job_queue_processes = 0
job_queue_interval = 10
parallel_max_servers = 5
background_dump_dest = C:\oracle\admin\PPDDEV\bdump
user_dump_dest = C:\oracle\admin\PPDDEV\udump
max_dump_file_size = 10240
oracle_trace_collection_name=
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Fri Nov 04 17:47:07 2011
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Fri Nov 04 17:47:08 2011
create controlfile reuse set database PPDDEV
datafile 'C:\oracle\oradata\PPDDEV\system01.dbf',
'C:\oracle\oradata\PPDDEV\temp01.dbf',
'C:\oracle\oradata\PPDDEV\rbs01.dbf',
'C:\oracle\oradata\PPDDEV\indx01.dbf',
'C:\oracle\oradata\PPDDEV\tools01.dbf',
'C:\oracle\oradata\PPDDEV\dr01.dbf',
'C:\oracle\oradata\PPDDEV\users01.dbf'
logfile 'C:\oracle\oradata\PPDDEV\redo01.log' size 1M,
'C:\oracle\oradata\PPDDEV\redo02.log' size 1M,
'C:\oracle\oradata\PPDDEV\redo03.log' size 1M resetlogs
Fri Nov 04 17:47:12 2011
Successful mount of redo thread 1, with mount id 1145344671.
Fri Nov 04 17:47:12 2011
Completed: create controlfile reuse set database PPDDEV
dataf
Fri Nov 04 17:47:12 2011
alter database PPDDEV open resetlogs
RESETLOGS after incomplete recovery UNTIL CHANGE 282235
Fri Nov 04 17:47:12 2011
Errors in file C:\oracle\admin\PPDDEV\udump\ORA02644.TRC:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: 'C:\ORACLE\ORADATA\PPDDEV\REDO03.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Nov 04 17:47:12 2011
Errors in file C:\oracle\admin\PPDDEV\udump\ORA02644.TRC:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLE\ORADATA\PPDDEV\REDO02.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Nov 04 17:47:12 2011
Errors in file C:\oracle\admin\PPDDEV\udump\ORA02644.TRC:
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: 'C:\ORACLE\ORADATA\PPDDEV\REDO01.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Nov 04 17:47:14 2011
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO03.LOG
Successful open of redo thread 1.
Fri Nov 04 17:47:14 2011
SMON: enabling cache recovery
Fri Nov 04 17:47:15 2011
Dictionary check beginning
Dictionary check complete
Fri Nov 04 17:47:15 2011
SMON: enabling tx recovery
Fri Nov 04 17:47:31 2011
Completed: alter database PPDDEV open resetlogs
Fri Nov 04 17:47:31 2011
alter database PPDDEV character set WE8ISO8859P1
Fri Nov 04 17:47:31 2011
Thread 1 advanced to log sequence 2
Current log# 2 seq# 2 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO02.LOG
Thread 1 advanced to log sequence 3
Current log# 3 seq# 3 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO01.LOG
Thread 1 advanced to log sequence 4
Current log# 1 seq# 4 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO03.LOG
Thread 1 cannot allocate new log, sequence 5
Checkpoint not complete
Current log# 1 seq# 4 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO03.LOG
Thread 1 advanced to log sequence 5
Current log# 2 seq# 5 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO02.LOG
Fri Nov 04 17:47:40 2011
Completed: alter database PPDDEV character set WE8ISO8859P1
Fri Nov 04 17:47:40 2011
alter database PPDDEV national character set WE8ISO8859P1
Completed: alter database PPDDEV national character set WE8IS
Fri Nov 04 17:47:40 2011
alter database rename global_name to "PPDDEV"
Completed: alter database rename global_name to "PPDDEV"
Fri Nov 04 17:47:40 2011
Restarting dead background process EMN0
EMN0 started with pid=11
Fri Nov 04 17:47:43 2011
Shutting down instance (normal)
License high water mark = 1
Fri Nov 04 17:47:46 2011
ALTER DATABASE CLOSE NORMAL
Fri Nov 04 17:47:46 2011
SMON: disabling tx recovery
SMON: disabling cache recovery
Fri Nov 04 17:47:48 2011
Thread 1 closed at log sequence 5
Fri Nov 04 17:47:48 2011
Completed: ALTER DATABASE CLOSE NORMAL
Fri Nov 04 17:47:48 2011
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
archiving is disabled
Starting up ORACLE RDBMS Version: 8.1.7.0.0.
System parameters with non-default values:
processes = 150
shared_pool_size = 52428800
large_pool_size = 614400
java_pool_size = 20971520
control_files = C:\oracle\oradata\PPDDEV\control01.ctl, C:\oracle\oradata\PPDDEV\control02.ctl, C:\oracle\oradata\PPDDEV\control03.ctl
db_block_buffers = 19200
db_block_size = 8192
compatible = 8.1.0
log_buffer = 32768
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
db_files = 1024
db_file_multiblock_read_count= 8
max_enabled_roles = 30
remote_login_passwordfile= EXCLUSIVE
global_names = TRUE
distributed_transactions = 500
instance_name = PPDDEV
service_names = PPDDEV
mts_dispatchers = (PROTOCOL=TCP)(PRE=oracle.aurora.server.SGiopServer)
open_links = 4
sort_area_size = 65536
sort_area_retained_size = 65536
db_name = PPDDEV
open_cursors = 300
os_authent_prefix =
job_queue_processes = 4
job_queue_interval = 10
parallel_max_servers = 5
background_dump_dest = C:\oracle\admin\PPDDEV\bdump
user_dump_dest = C:\oracle\admin\PPDDEV\udump
max_dump_file_size = 10240
oracle_trace_collection_name=
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
SNP0 started with pid=8
SNP1 started with pid=9
SNP2 started with pid=10
SNP3 started with pid=11
Fri Nov 04 17:47:56 2011
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Fri Nov 04 17:47:57 2011
alter database mount
Fri Nov 04 17:48:04 2011
Successful mount of redo thread 1, with mount id 1145346003.
Fri Nov 04 17:48:04 2011
Database mounted in Exclusive Mode.
Completed: alter database mount
Fri Nov 04 17:48:04 2011
alter database open
Fri Nov 04 17:48:04 2011
Thread 1 opened at log sequence 5
Current log# 2 seq# 5 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO02.LOG
Successful open of redo thread 1.
Fri Nov 04 17:48:04 2011
SMON: enabling cache recovery
SMON: enabling tx recovery
Fri Nov 04 17:48:05 2011
Updating character set in controlfile to WE8ISO8859P1
Completed: alter database open
Fri Nov 04 17:48:20 2011
Thread 1 advanced to log sequence 6
Current log# 3 seq# 6 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO01.LOG
Maybe you are looking for
-
Moving Favorites from PC to Mac
Hello, I'm moving favorites from IE 7 on Windows XP to Mac Leopard. Do I just move the files over and import or is there something specific regarding conversions I need to complete? Thanks.
-
Wireless runs great, but printer problems...
My Airport Extreme was a breeze to hook up and get connected to the internet, but printing is an issue. The Airport Utility sees the printer from both a macbook and a 64 bit Vista desktop, but when I try to print and get a message that says printer c
-
Custom Login Module Called by WebLogic
I have managed to write and deploy a custom login module that works just fine with other app servers (except WebLogic). I am using WebLogic 6.1 with sp2. When WebLogic starts up, it seems to be calling my custom login module with a user of "system".
-
Hi All Could anybody tell me the latest version of SAP Web AS . thanks in advance, Madhusudan
-
Boots from disc, but doesn't recognize hard drive
I've got an 800mhz G4 iMac and it won't start up. It boots really slowly into the blue screen and then never passes that point. It's just a blue screen. I can move the mouse around, but nothing else happens and there's nothing for the mouse to manipu