Problems with interlaced and progressive on the same timeline ?

Is there any problem with having both interlaced and progressive on the same timetine ? EG will DVD work OK?
thanks
Narada

Hey Narada,
I've had projects where I used both and DVD worked just fine. The only thing I'm not sure about now, though, is what I had my field dominance set to. I'm pretty sure it was set to the default so either lower or higher. This leads me to ask the old pros around here a second question:
What happens to progressive video that's placed in a timeline with a field dominance? Is it no longer treated as progressive?
Anyway, to answer your question my DVDs worked just fine.
Hope that helps,
Cameron

Similar Messages

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

Can I use HP Pro 8600 with usb and wireless at the same time

Can I use HP Pro 8600 with usb and wireless at the same time? Sometimes I cannot get the wireless to work, it seems to be my laptop. It would be nice if I could use the usb, but it doesn't work. What should / can I do, if anything?
Sam

Hi,
Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Best way to work with interlaced and progressive clips in the same timeline

I´m shooting with Sony MC-50E camera in 1920x1080, 50i. When importing with Log & Transfer I can work with ProRes 422 files in interlaced mode. I have to mix the footage with video screencapture which is progressive (ProRes 422). The final videos are for web only so it should end up as progressive H264 videos. I´m getting good result if exporting to H264, 1024x576 with deinterlacing enabled, but exporting to full HD gives typical interlaced lines in the picture. How can I avoid this and what is the best solution for working with both interlaced and progressive clips?

Deinterlace in Compressor using Frame Controls, Best settings. You can reconnect the deinterlaced files to your project, if you've already edited, but you may need to copy and paste the clips in your sequence to a new 25p timeline, then Remove Attributes, Basic Motion.
When you're ready to export your sequence, use Quicktime Movie, Current Settings, Self-contained. Take that file to Compressor to transcode back to h.264.
The Apple T.V. preset is very good.

[Solved] Sound with ALSA and PulseAudio at the same time?

Hi, I am using arch linux to play Counter Strike on.
While it works fine and all, I just don't get any sound in CS because I am using Mangler, which only seems to work with my microphone if I use PulseAudio.
I hope this is a rather simple issue, basicly, I just want to enable sound in PulseAudio and ALSA at the same time, is this possible?
Last edited by Paaskehare (2010-08-12 15:39:09)

I have read that PulseAudio decreases sound quality, and therefore I would not like to use this as a systemwide driver, but rather only where it is needed.
Please correct me if I am wrong
Edit:
Ok, sound quality isn't noticeably worse, so this will do. HOWEVER, while I am in Counter Strike my sound is delayed by ~1 second, and it is therefore useless, any thoughts on that matter?
Edit again .. Solved this time:
I set my ALSA plugin in winecfg to "Hardware Acceleration: Emulation" - that seemed to do the trick.
Last edited by Paaskehare (2010-08-12 15:38:56)

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Trying to make a link under and object on the same timeline in-active

Hello Flash pros, I am wonder if there is a way to make a linked object deactivate if another object appears above it in my swf file. Basically when mousing over the a image that covers the link object, the hot spot still works which give the impression that the image that is showing above it has a link. Btw I already know how to place the overlaying image on another timeline of which the linked object is not on, but that is not what I am looking for in this case, I actually need the linked object to remain on the same timeline as the overlay images.
Please help
thanks
MontyRob

When you get back, move your posting to the AS1/AS2 forum if this doesn't resolve it for you. Make the image a movieclip and assign it a rollover code as well.
on(rollover){
this.useHandCursor = false;
That will block access to the button below but disable the cursor changing to indicate the image as an interactive object.

Problem with FWSM and L3 interface in same switch

I have two 6513s with an 802.1q trunk connecting them. Each switch has redundant Sup720s running in Native mode, IOS ver 12.2(18)SXF (they were initially running SXD3). A FWSM (ver 2.3(3), routed mode, single context) is in each switch, setup in failover mode.
I can not get a PC, in a vlan that has the layer 3 interface defined on the switch with the active FWSM in it, to communicate with devices "behind" the FWSM. If I move the layer 3 configuration for that vlan to the other 6513, everything works fine.
The MSFCs are on the inside of the firewall, they have a layer 3 interface configured in the same vlan as the FWSM "inside" interface. Several "same security level" interfaces are defined on the FWSM and used to protect server farms. I am using OSPF on the MSFCs and FWSM and the routing table is correct.
The FWSM builds connections for attempts made by the PC with the layer 3 interface defined on the same switch as the active FWSM just fine, so this is not a FWSM ACL problem.
A ping of the FWSM "inside" interface from a PC with the layer 3 interface defined on the same switch as the active FWSM fails, even though debug icmp trace on the FWSM shows the request and the response. A packet capture, using the NAM-2, shows only the request packets. I have captured on the common vlan and the FWSM backplane port channel interface.
Just to add to the confusion, if I capture in the same places, but do the ping from a PC that is in a vlan with the layer 3 interface defined in the 6513 that does not contain the active FWSM, which works fine, I see the request and reply on the common vlan capture, but only the request on the port channel capture.
This problem has been there from the beginning of this implementation and has not changed with IOS and FWSM software upgrades. I have experienced this with any and all vlans that I tried to define the layer 3 interface for on the switch with the active FWSM. I have MLS turned on.
If anyone else has experienced this and solved it, or knows what is going on, I would appreciate any insight.
Thanks.
Keith

I will have to get setup to record more data, but I do know the FWSM showed a ping request and a ping reply at the "inside" interface.
I believe my problem is related to the IOS command "firewall multiple-vlan-interfaces" which I put in place to allow IPX traffic to be brought around the FWSM. The little documentation that there is for this command, states that policy routing may need to be implemented to prevent ip packets from going around the firewall. I do not have any policy routing in place.
I also do not have any active layer three interfaces defined for any of the vlans assigned to the firewall except the "inside" interface. So my resoning was that I did not need to be concerned about ip packets having a way around the FWSM. My suspicion is that this command and the fact that I have mls on is causing some type of a problem which results in the packet being "lost" when it needs to be going through the MSFC in the switch with the active FWSM to get to the PC. Hopefully that makes some sense.
Do you have any idea where better documention on using the "firewall multiple-vlan-interfaces" may be, or a better explanation of all that is happening inside the switch when that command is used?
Thanks.

Problem with static and nonstatic objects in same code?

Hi everyone, I am working on a project and I kept running into an odd problem where my code would compile but when I went to run the code I would get an exception. I finally narrowed my problem down to a small fragment. Here is an example.
class Mut{
static Mut Fido = new Mut();
Mut Sammy = new Mut();
public static void main(String args[]){
This piece of code will compile but when I run it on an WindowsXP machine the JRE tells me there is an exception at line 3. If I change the code to this:
class Mut{
static Mut Fido = new Mut();
static Mut Sammy = new Mut();
public static void main(String args[]){
The code runs fine without any problems. My question is: why can't I create a static object and a nonstatic object in the same class? Is this a certain feature of JAVA I don't understand or is this a blackbox problem with XP? Any help is appreciated. Thanks
Vance

Is the exception stack trace what is displayed in the command-line window? If it is here is what is displayed(This is a lot):
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
at Mut.<init>(Mut.java:3)
C:\>
I don't know if this is everything because the winow won't let me scroll back up to where I enterd "java Mut"
Hope this helps.
Message was edited by: Vance
cell@tech

Problem with changes and visualization in the forms

I have a problem with forms, the problem is the next, I do a modification in the database with a update or with form and in other station no visualized the change. The other station need close the form and open for visualize the modification.
Why I have this problem

I am not sure what you mean. Are you saying that after one form changes and commits data, it is not visible on the other user's screen?
If that is the problem, unfortunately, that is the way Forms works. A form must re-query the data to see changes on the database. If your form must close and re-open, then you should create a trigger in your form to re-query the same data.
I hope this helps.

IPhone - how to sync with iPhoto and Aperture at the same time ???

I'm having a really hard time with syncing my photos - I'm using iPhoto and Aperture on my Mac. When I launch iTunes and start managing my iPhone, it seems like I should be able to sync photos from a variety of sources all at once (iPhoto, Aperture, other folders).
However, whichever option I select in the photos drop-down becomes the only libraries that are available to sync. What I mean is that if I select some of the Albums in my iPhoto list and sync those, when I later drill down to Aperture and select albums from there and perform a sync - then the previously synced/loaded albums and photos from iPhoto are automatically removed from the iPhone.
Why can't I sync between multiple photo albums / sources at the same time? This is incredibly annoying.

Here's how I solved this problem:
In Aperture, select File -> Import -> iPhoto Library
Then under the "Store Files" dropdown, be sure "In their Original Location" is select. This will allow Aperture to see your iPhoto library, but it will be managed by reference rather than phyisically imported.
Now, in iTunes, select Aperture as the application from which you want to synch photos, and select the option to synch specific albums.
You should be able to see the names of albums in iPhoto as well as those created in Aperture.

BEX : report with real and budget on the same line

Hi everyone,
I need to create a Bex report showing on the same line :
- budget WBS element stored in a DSO (DataSource 0CO_OM_WBS_1)
- used amount stored in another DSO (DataSource 0FI_GL_4)
Data are stored in 2 different DSOs.
If a create a multiprovided with both DSOs I will get 2 lines in my report as axes are different,no ?
Thanks for any idea.
Aussie

Hi,
You can make use of infoset.You can also do a lookup from one dso to another ant transport the values in one dso.So by doin this alll your values will be stored in one place and then you can show the values in one line in report.
Please also give me the idea of keyfields of both dso's.
You can also use constant selection in report if you are using multiprovider through this to some extenet you can solve the problem of values in coming in two lines.
Also check out the below PDF for Displaying Result Row in One Line While Reporting On Multiproviderer.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70dcd7b5-6a3d-2d10-c984-e835e37071a2?quicklink=index&overridelayout=true
Hope it helps.
Regards,
AL
Edited by: AL1112 on Aug 3, 2011 11:55 AM

Problem with multiple Ajax calls to the same Servlet

Hi,
I am new to AJAX. I have a requirement where in, i have to make ajax calls to the same servlet in an infinite loop and check for an application context attribute to refresh the contents in the JSP.I am using the following script in JSP. The problem is i am not able to invoke the servlet more than one time.But I am able to go through the script at specific time interval using setInterval() function of Javascript and able to get alerts.But the problem is with xmlhttp.open("Get", url, true);. Its not getting called more than one time, even though i make multiple calls to the function.
*<script type="text/javascript">*
var xmlhttp
var resp
function fAjax()
alert("Here");
xmlhttp=null;
resp=null;
// code for Mozilla, etc.
if (window.XMLHttpRequest)
xmlhttp=new XMLHttpRequest();
// code for IE
else if (window.ActiveXObject)
xmlhttp=new ActiveXObject("Microsoft.XMLHTTP");
if (xmlhttp!=null)
xmlhttp.onreadystatechange=state_Change;
xmlhttp.open("GET","/PSAPBackOffice/TestServlet",true);
xmlhttp.send(null);
else
alert("Your browser does not support XMLHTTP.")
function state_Change()
// if xmlhttp shows "loaded"
if (xmlhttp.readyState==4)
// if "OK"
if (xmlhttp.status==200)
     resp=xmlhttp.responseText;
     //alert(resp);
     if (resp=="CALL"){
     form.method="GET";
     form.action="/Project/Details.jsp
form.submit();
else
alert("Problem retrieving XML data")
function callTimer(){
     setInterval("fAjax()",5000);
*</script>*
*Code for Servlet here:*
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException
ServletContext objContext= getServletContext();
     String value;
     synchronized (objContext) {
               value=(String) objContext.getAttribute("Flag");
                    if(value==null){
                    else if(value.equals("Done")){
                         response.setContentType(CONTENT_TYPE);
                         PrintWriter out = null;
                              try {
                                   out = response.getWriter();
                              } catch (IOException e) {
                                   // TODO Auto-generated catch block
                                   e.printStackTrace();
                                                            } catch (NullPointerException npe) {
                                   // TODO Auto-generated catch block
                                   npe.printStackTrace();
                         objContext.setAttribute("Flag","No");
                         out.println("CALL");
Can someone figureout the problem or mistake and help me out.Its urgent and please help me in this regard.Thanks in Advance !

I'm not sure I'm following you. The mapping from URL to servlet can contain anything you want. So you could have the URL /blah/blah/blah that, with a mapping something like /blah/* would pass all requests with that URL pattern to your servlet - no one has to know it is a servlet. Your servlet could then parse the URL to see what it has to do or you could pass parameters as part of the URL or as hidden fields.

Problems with 10049- start menu remains the same, flash crashes, spartan crashes

I updated from 10041, I cannot open start menu at first. After I restarted several times, I can open it but it seems to be the same with old version. I tried Spartan using the search function, and it always crash the time it opens.
Another problem I found is that I cannot use flash in all programs, it always said it crashed.
Additionally, the system becomes really slow compared with older versions.
Thank you for your help

Hi whOWe,
Please submit what you have encountered through Windows Feedback.
Take a try with the command suggested by team zigzag, run the following command first:
DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:\Sources\Install.wim:1 /LimitAccess
Where the X: is the mounted drive using the downloaded Windows 10 build 10041 ISO ifle.
See this thread for reference:
The "new" dism and sfc methods do not work
for me
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

1. Working with DV and HDV in the same project 2. importing music error

1. I am working on a project that was shot with both HD and DV footage. What is the best way to work with both types of files on the same time line so that I can compress them to DV format video?
2. Also, I am having a problem importing music files into Premier. The error message pops up and says that it has an error compiling movie.I am not sure what setting i need to change to get this to work. I am working with MP3 files like I have done with past projects but nothing seems to work. Please help.

i "I have never worked with with soundbooth but i changed the file type to WAV but had to use IMA ADPCM for the Audio options because I could not save the uncompressed type."
Ellis,
How did you "change" the MP3 - what program did you use? You might want to explore Soundbooth, as Aanarav suggests. It works well with PP & Encore.
[EDIT] I use Audition, but think Soundbooth would be a good choice, as it is bundled in the Production Studio CS3.
Many folk have problems with MP3 files, for whatever reason. You should be able to convert to PCM WAV from any number of good conversion programs.
I use a fair number of MP3's in PP and have never had any trouble. Some others have never been so lucky.
Hunt

Problems with interlaced and progressive on the same timeline ?

Similar Messages

Maybe you are looking for