Problems with ipod after updating it

I hooked up my ipod and it was recognized by itunes. itunes asked me if i wanted to update the ipod and i clicked yes. While in the process of being updated, the ipod turned off and tried to restart but instead of restarting to complete the procedure, the ipod kept on turning on and off. I unplugged the ipod from the computer and plugged it in the electrical outlet, but unfortunately it keeps doing the same thing, just turning on and off. I tried to reset the ipod but it would not let me and now the ipod just keeps turning on and off by itself. What should I do ? Any ipod Pros out there that can help me Thank you

You could try resetting the Firmware... Plug it into your computer, and open iTunes 7.0, when your iPod shows up, click on it and click Restore, this will restore your iPod to the original settings and firmware.
If you cannot get the iPod to plugin and sync with iTunes, you might want to call AppleCare for more information.

Similar Messages

  • HT1589 problems with itunes after updating..can't locate some of my songs..some have an exclamation point beside them how do i get these songs back in my itunes

    I'm having problems with itunes after updating. I've lost all my playlists,,finally played around with it and got the songs back but some have an exclamation point beside them and can't be located. they are songs i've purchased. I'm not very computer literate so this is a major problem. I have spent hours with this. I just want all my songs to play even though I'm not happy that I have to recreate my playlists. It would be so much easier if I knew and understood how to correct this. Has anyone else had this problem and if so..is there an easy way to correct it?

    Not sure how this is an ipod touch question.
    Perhaps you should post in the itunes forum.

  • I am having problem with iMessage after updating my 5s to iOS 8.0.2

    I am having problem with iMessage after updating my 5s to iOS 8.0.2. I cannot send any text by iMessage anymore. My friend tries to text me and it did not go through

    Hello Huyen,
    Thank you for using Apple Support Communities.
    You can use the following article to troubleshoot Messages:
    iOS: Troubleshooting Messages
    Regards,
    Jeff D. 

  • HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

    I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

    Hi were you able to resolve yours?
    I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
    Perform a hard reboot
    Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

  • Ipad mini problem with wifi after update 6.1.3

    Hello!
    My ipad mini was working fine before the 6.1.3 upgrade, immediately after updating, the wifi stopped working. Restore the iPad to its factory settings as deleting both my data and to reintroduce the network, was still not working.
    Help please!

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Some other things to try:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Problems with X3 after updating

    Hi,
    first, it is possible that I will use some wrong expressions because my phone language is actually German.
    Last week I updated my phone from v6.11 to v8.4.
    Before, I saved my files to the memory card, afterwards I restored them. It said "Settings reset" and there were the problems I will describe; I tried to restore again, but I could not choose the menu item "programs and games" now.
    So, now
    - all the themes and ringtones are gone
    - the rest of my programs seems to be links named with with file type ".rms" which is "not supported" (All 4,0 MB and named chat_xxx, conv_xxx, isuite_xxx, mynokia_xxx or wocl_xxx), including the calculator which didn't leave a trace.
    - my games are playable 'cause I saved them manually on my memory card - but the ones I added after I bought the phone don't work (message: invalid program. Delete?)
    - I can't download a (special) program from ovi store (which I didn't try before the update, because of that I don't know if it's perhaps a problem of my provider) (message: certificate not on telephone or SIM)
    - when I choose "All photos" it says "no photos to show", but I can open them over "contents -> memory card -> pictures". The camera saves the photos there, too, but it doesn't show them either.
    I wonder now if it helps
    - restoring the first backup again, but just "gallery files" and "programs and games" (which is chooseable again now) (this, I think, would not solve the problems with my memory games and the invalid file types of my games)
    - making another backup and do the update again (will the first update then be chooseable again? I don't want to give up my programs, themes and ringtones... Can I restore them from the first backup and the rest from the second?
    I would have tried the second possibility if I knew if it is possible... Please answer that, or, if you have a better solution, please give it to me.
    Regards
    Philip

    Hi Philip,
    If you still have this issue (and have not tried yet), try to reset your device by selecting Menu > Settings > Restore factory settings > Restore all.
    And before restoring your backup check that all preloaded themes and ringing tones are working. Then try restoring apps and games from your backup again.
    If some apps/games are not working after restore it's most probably because those are DRM protected and those you would need to reinstall.
    -ThreeOs

  • Problem with iphone after update

    Hey guys, I am having a bit of bother with my iphone. Basically i was given an iphone 3g and I'm not really sure where it came from but it had a vodafone sim, I am on an orange contract so i took out the vodafone sim and put the orange one in and to my surprise it worked,  it has been working fine for months but tonight I decided to do an update on itunes and now it is telling me that the "sim card in this phone does not appear to be supported" and and my phone is stuck on a screen with the usb cord and the itunes logo telling me to connect it, also i can only make emergency calls. What on earth have i done? I no longer have the original sim so cant use that to activate it
    Is there any way to fix this? I had no idea doing an update would cause this trouble and atm my phone is useless.
    Any help would be very much appreciated,
    Cheers
    Tors,

    The problem also appeared for some people after updating to 7.0, and for some after updating to 6.1.3, or 6.1.2, or to 5.1, 5.0, etc. and some first saw it without updating at all. Which argues against it being a software problem with 7.1 specifically.
    Restore your phone using iTunes and set it up as a new phone. It you still have the problem it is a hardware failure.

  • Problem with screen after update

    hello,
    I have a BB Passport and I have a problem after the last software update OS 10.3.1.1565
    - the screen is flashing when i go into an application... This happens randomly... not every time. First I had this problem with Evernote. I erased everything from my phone and I performed a full wipe (factory reset). The problem is not solved. now is happening more often... when I go to settings, when I open an app... and so on. Usualy is flashing white screen, but last night when I wanted to watch a video, it flashed green screen...
    Is there a way to solve this problem? Is this a software problem? Or I have to replace my screen?

    http://www.blackberry.com/btsc/KB36757
    There is a fix, though not officially released yet by BlackBerry:
    http://forums.crackberry.com/bb10-leaked-beta-os-f​395/os-10-3-1-2480-upgrade-files-passport-only-100​...
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Problem with sound after update

    Hello
    After update to 11.3 I have no bass sound in subwoofer in Firefox browser (youtube). I uninstall the newest version and install previous (11.2) and bass plays ok.
    My os: Windows 7 x64. Sound card Creative X-fi.

    Hello!
    My problem is summed up in this topic.
    Updated Flash Player with 11.3 this morning (june 12th 2012) and since then my 7.1 Sound System works only 2.1. If i enable EAX Effects, works on 7.1 but since it`s just a room it sounds very odd.
    I have no problem with sound on HTML 5 websites for that matter, Winamp, Video Players, games.
    Uninstalled Flash Player, sounds work ok without it on different browsers, other than Chrome (since it has FP built in).
    I hope for a sollution soon.
    Thank you.
    *edit*
    Untill there is a permanent solution, i found a way to deal with my issue and i hope it will help others.
    I personally use Chrome and this is for this browser:
    1. Type "about:plugins" w/o the quotation in the navigation bar.
    2. On the upper right u will see "Details" click it then find the word "flash", and you will see something like this:
    Flash (3 files) - Version: 11,3,300,257
    Shockwave Flash 11.3 r300
    Name: Shockwave Flash
    Description: Shockwave Flash 11.3 r300
    Version: 11,3,300,257
    3. I say again, this worked for me on Chrome. The 3 files i have, two of them are Version 11,3,300,257 and one is 11.2.31.144
    4. Simply disable the lates version 11.3 and enable the previous version 11.2
    I hope this helps.
    Message was edited by: AndrewPAM

  • Problem with camera after updating z1 to 14.5.A.0.270

    Hello
    I'm facing a problem after updating my Xperia Z1 to 14.5.A.0.27, I.e. Lollipop 5.0.2.. problem is with the camera, when I tried to capture a picture with auto flash/flash on, a bright light is appearing on the lower portion of the image. Plz help to overcome this.. Thnx in advance
    Solved!
    Go to Solution.

    Ca you please test the same pictures with flash and without the case?
    A proud Sony User since 2002
    If I was helpful to you, thank me by Kudos

  • Problem with ipod nano updater

    Hi.
    I have the other problem with my ipod nano. I reset my software ipod nano, but ipod updater 2006-01-10 write:"iPod Updater 2006-01-10 cannot continue because there are other applications using iPod. Please close all iPod applications andtry again.". But I don´t using other applications, iTunes is closed. I try my iPod update on other computer, but text is same. Can you help me please?
    iPod is correct only as external disk. Thank you.

    Hi,
    I'm on a Mac so things may not work the same. Have you tried restarting your computer? If you do that maybe nothing will be using it at first.
    I hope someone who knows Windows will come to help you.
    Regards,
    Colin R.

  • Problem with Nano after Updating

    I recently bought an iPod Nano (Model MA005LL). When I first tried to put songs into it from iTunes it seemed like it worked - iTunes recognized it and successfully transferred the files. Then I noticed that couple of purchased songs didn't make it to my Nano's Playlist. I realized that I had to update the iPod Firmware. So, I downloaded & installed the latest Updater on my PC (running Win2K).
    That's when the problem happened - during the update process, both my PC and Nano froze. So, I had no choice but to disconnect the Nano and kill the updater process. Since then neither does my iTunes recognize my Nano nor does the updater.
    I think my PC recognizes it because whenever I disconnect the USB chord, the PC complains that I unplugged a device without stopping it first. Also, whenever I try to open Windows Explorer, it behaves extremely slow; whenever I plug it out, explorer goes back to normal.
    I have tried ALL the 5 Rs and nothing works - the updater freezes everytime I try to use it with the iPod; so I can't restore it using the updater.
    Another strange thing is that when I click on About, it not only says zero Songs & Photos, it also says 0 KB for Capacity & Available. The version does say 1.2 though. Also, the Format says Unknown.
    So, at this point of time, my Nano is pretty much useless. I would really appreciate if anybody could please help me fix it such that I don't need to take it back to the store.

    look on page 16(Help Nano 2g update problem) and if that does not help there is a really good one that I used myself on page 20(Problem with the update) which has a really good step by step process that returned mine to perfect working condition.

  • IOS 8.1.3 problems with email after update

    Hi i have problems accessing my email accounts after update to iOS 8.3.1 , I tried to delete all accounts but I still have the same problems.

    Hello, so, I was having the same issue including my memory showing 0 GB available. I tried all of these suggestions and couldn't make it work, here's what finally worked for me:
    on your Iphone, Go to Settings > iCloud > Find My Iphone and Turn it OFF.
    That worked for me and now shows the free GB I truly have left and no longer have issues with my email. Hope this helps if it does please let me know and pass it along.
    Thank you :-)

  • Problems with Audio after update to Firmware 2.1

    Dear Blackberry users
    Im using a Playbook SN 1344-6061-5356. After update to firmware 2.1.0.1753 the audio function is not working if I am connected with USB speakers.
    Pairing is okay, but the audio stream comes with no volume.
    Urgent help would be welcome . Thank you.
    Clemens Heddier/Germany

    I dont have my BT gateway with me but will test tonight.
    Have you tried removing the pairing and pair it again?
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Problems with WorksetMap after Update to SPS18

    Hello!
    We have a problem with our WorksetMap iViews after upgrading to SAP EP 6.0 SPS 18.
    In our reporting-application we have WorksetMap iViews to create company overwievs. But these iViews should not be appear in any navigation iView.
    Therefor is the iView option "Invisible in Navigation Areas" ... Until the update it had worked really fine, but after the update all WorksetMap iViews apper in every detailed navigation.
    Does anyone know this problem or have a solution for this problem?
    I would appreciative your help.
    Thanks in advance!
    Stephan

    Hi John!
    Thank you for this hint!
    I followed the instructions from this note and the porblem is solved!
    Thanks and best regards,
    Stephan

Maybe you are looking for

  • Error while deploying to Production Managed Server

    My setup is one Domain, one AdminServer, one Managed Server all running in Production Mode.. The AdminServer:7001 and ManagedServer:7003 are on the same box. I can deploy my app and hit it via a web service on AdminServer:7001 but I can't hit is on t

  • Query stats substitution strings on IR region

    Hello, Are the query stats substitution strings, like #ROWS_FETCHED#, #TOTAL_ROWS#, #FIRST_ROW_FETCHED# and #LAST_ROW_FETCHED#, should be active in an IR region? Currently, it seems they are not active, and I'm asking if it's intentional or a bug. Th

  • Lock the report changed by USER

    Hi All, I have created queries in BEx for the end user . now i want to lock these report so that no one can change it  ( Display Only). What are the steps to do that ? Regards, Komik Shah

  • How many Sql licenses do i need

    hi , With one sql license how many users can connect concorrently to SAP Business One.If there are more than 50 SBO users how many sql licenses do i need to take? Thanks OmPrakash.

  • 6600 slide update problem

    I made a huge mistake couple of days ago, I tried to update firmware on my 6600 slide, since I now have a new phone and I want to give this one away. Anyway, update failed (this happened last year, too, but I found a solution somewhere, I can' t reme