Problems with logitech headset

Hey guys I was just playing Call of Duty 4 the other day, using my Logitech headset on Mountain Lion 10.8.3. But when I updated to 10.8.4 the sound from the game just completely stuffed up. The music is OK but all other sound is gone. The only other sound I can hear is what appears to be voice chat coming from the right headphone but it is very, incredibly soft and you an barly hear it. Although the sound is fine when I use the built-in speakers. Is there a problem with the headset or is it just the software in Call of Duty 4?

Hi,
As it has been so long I reread the topic.
I am now confused though.
In the first post you said
... It works fine with Skype, but when using iChat, there is no microphone pick up. I have set the audio settings to the USB headset in both the System preferences for my iMac and for the iChat preferences; ...
From that I went on to say set the iChat bits to anything else then set System Preferences > Sound > Input and then reset iChat to the Headset Mic option.
You then said it was the Output (incoming Audio) that you could not hear.
I suggested the same technique be applied to the iChat Output options/System Preferences > Sound > Output with iChat again being Set "Last".
You have replied that you have set the preferences in both places but not to the order in which you did them (this is the important bit).
I have seen one post that suggests that Output to the Headset should be done before the Mic/Input settings but did view this with a deal of scepticism.
Also even though you have no MIDI device can you Open Audio MIDI Set up in Applications/Utilities and see what sample rate the Headset is using for Input (Mic) and Output.
Ideally iChat seems to prefer 44100
You may also notice here that you have different controls over the volume.
Is it Mic/Input (your Outgoing Audio) or Incoming Audio/Output to Headset that is the issue ?
8:52 PM Tuesday; June 22, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
Message was edited by: Ralph Johns (UK)

Similar Messages

HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

C2-00 Problem with Bluetooth headset

I use it for a week and have a problem with bluetooth headset.
When I finish a call my mobile is stop working.
The only way to get it back is remove a battery.
I try to use other bluetooth headset but it have the same problem.
Please help me to fix this problem.
Thank you.

conceivably, yes, that is how its supposed to work
i was just wondering if there was a way to turn it off somehow, so as to only enable the bluetooth for calls and not for all audio. unpairing and pairing the bluetooth definitely works, but it just seems like overkill everytime i want to anything regarding sounds (asise from calls)
thanks,
vasilis

Blackberry 8220 Flip Black problems with Bluetooth headsets/caller cannot hear me

Problems with 3 headsets. Eralier it was working fine. but now I can hear the caller but the caller cannot hear me or anything from my side over the bluetooth headset. Otherwise without the headset the phone and the speakerphone work just fine. Any ideas????

I am experiencing the same problem, started about 10 days ago. To date, I have reset network settings, and have restored to default without success.
The weird thing with my issue I've noticed, after I go through a half dozen attempts at calling and recalling the person back, eventually, the problem goes away and the caller can hear me without issue after that. But then that may just be the 50% of the time occurrence.
So, I wonder if this is signal related, although it has occurred in 3 different locations in the US. Or if there is some restricted, or privacy policy that is related to AT&T regarding my account when calling. Kind of like being on a no fly list?
However, I can't continue with this happening, everyone says I am give Steve Jobs a bad name, so its to the genius bar or whatever they call it these days, I am heading.

Problems with the Headset SBH80 of Sony

With OS X Yosemite ver 10.10.3 (14D131) The Headset SBH80 of Sony distorted like speakers being played too loudly or blown out, but this distortion is present at all volumes levels with the headset. The problem is less present when someone speaks softly.
Someone has the same problem?
In the same form this Headset has problem with other devices of Apple like iPhone 6 iOS8.3 and Mini iPad2.
When I connected it with other devices different of Apple sound great without problem. Only with Apple's devices has the problem, why?
Thanks a lot.

Hi
please try two things.
1) factory reset
if that does not help
2) format the mass memory.
before doing factory reset, please do back up your of your personal data to a memory card or Ovi suite.

Problem with speakers/headset working together

I'm trying to set it up so all my sound comes through the speakers except for Ventrilo, which would come through the headset. The mic on the headset is working fine, and there are no problems with the speakers at all. The only problem is getting only Ventrilo to come through on the headset.

Hi,
Try the following.
Download the Conexant HD Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45166.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the Conexant device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the Conexant installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Help with Logitech Headset

So today I bought a logitech headset so I could do TeamSpeak with some friends in this game. Apparently there is something wrong with my sound card No matter which port I plugged the mic jplug into it would no record then I started playing somemusic and pressed record (using sound recorder) and it picked up the sound in perfect quality... SO I was like.. wtf why won't it record me so I unplug the mic part and try again... records in perfect quality... then I unplugged everything (all three speaker jacks and the mic jac from the headphone) and again it recorded whatever sound my computer made. Could someone please tell me what is going on? haha And hopefully help me solve my mic delima so I can just get my mic to work w/o my comp recording every sound it makes

Shibi wrote:
So today I bought a logitech headset so I could do TeamSpeak with some friends in this game. Apparently there is something wrong with my sound card No matter which port I plugged the mic jplug into it would no record then I started playing somemusic and pressed record (using sound recorder) and it picked up the sound in perfect quality... SO I was like.. wtf why won't it record me so I unplug the mic part and try again... records in perfect quality... then I unplugged everything (all three speaker jacks and the mic jac from the headphone) and again it recorded whatever sound my computer made. Could someone please tell me what is going on? haha And hopefully help me solve my mic delima so I can just get my mic to work w/o my comp recording every sound it makes
What freaking card you have? Have you select the correct recording sources in surround mixer? Try changing to 'What U hear' option.

Problem with my headset - right side: cannot hear anything

Hello
I have a macbook air and i plugged in a headseat today but I've noticed that the right side of my headset is not working. I cannot hear anything.
I made some tests and tried several different headsets and I realised it is always a problem with the right side. When I try any headset with my mac book air, I've noticed that I could not hear anything at my right ear.
Then I made another test, and I used the same headset and in other devices like my iphone for example. I've noticied that I can hear everything at both sides, so nothing is wrong with the headsets.
It seems to me that there is a problem with my computer. How do I go about solving this issue?
Is there both left and right sound boxes in my mac book air? I am asking this because I cannot see any sound boxes in my macbook air and therefore I wonder if there may be a problem with the right side of my sound box? Can this be possible?
Appreciated quick replies.
Tks,
Debora

System Preferences > Sound > Output > Internal Speakers/Headphone
Settings for the selected device:
Balance:
Make sure that the slider is set at middle.

Initialisation problem with Logitech Mx900 Bluetooth Mouse

Dear all,
I have a recent problem with the initialisation of the Bluetooth connection at startup with my Logitech Mx900.
The system fails to connect with the device. I have to go to the bluetooth pane (with the USB mouse) and to make a search in order to get the connection.
This is very disturbing issue.
I have seen quite the same topic with an intellimouse. Is there some general issue with 10.4.4 or Bluetooth firmware?
iMac G4 - Mac OS X 10.4.4 (8G32) - Bluetooth module DLINK DBT-120 Firmware 1.443 (1.443)
i mac G4 Mac OS X (10.4.4)

Well, I got it working, sort of. The normal buttons and the scroll wheel work as the should. The browse back and browse forward buttons do not work. The tilt wheel works, with tilting right acting as the browse back button, and tilting left acting as browse forward.

JMF Problem with Logitech camera

Hi
I have a problem with JMF Registry Editor. I've tryed Detect Capture Devices and during detecting my computer crashes (blue screan) and restart the system. How can I solve this problem? I've set JMFHome.
Thank you in advance.
Falken

Blue screen means something in the Windows code is crashing your computer. There's probably not anything you can do to fix it except unplug any devices you have plugged in...

Lumia 620 Music problem with wired headset

Sometimes when I start listen music with my Lumia 620 using WH-208 headset (great price/quality ratio),music is only heard from left earpiece. Then I switch power off/on and it plays normally. This has happeded before and after Amber update.

Seen that happen on 925 as well. Restart fixed it, my 925 came with Amber pre-installed, not sure if it is some bug.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Having problems with Logitech Vision Pro and AIM and I chat

Can't believe it can be this hard I'm trying to install a Logitech Vension Pro web cam and make with work with AIM via Ichat. I've got the camera to work in some applications so it does work. After many hours on line I decided that I needed to down load the new version of Ichat. But when I tried to install this I get the following error message: Cannot install Ichat Update on this volume. This volume does not meet the requirements for this update. Can some please give me an idea of what I need to do????
Thanks
Myrnarafa

Glen,
Thanks for the reply. The problem is that the Logitech Web Cam will not work in the AIMs program. I have it linked to the Ichat program but when I try to do a video chat there is nothing in the bottom of the chat window about video or audi. On my Windows PC, when you initate a chat window with someone you see on the bottom of the chat window a link to start a vidoe chat or an audio chat.
But there is nothing there on the MAC/AIM/Ichat window. I can type text and that works fine. The camera seems to work in other application and Microphone seems to work if you look in System Preferances/Sounds. The WebCam does not show up by name in the AboutThisMac/MoreInfo/USB but it does work in someother applications. So the problem is getting it to work in IChat and AIMS. Any suggestions would be greatly appreacated.
MyrnaRafa

Problem with iPhone Headset after plugging and unplugging from PC

Hello
First I would like to introduce myself, My name is Lukasz and I can very happy customer company Apple.
but...
I have one problem, which is really annoying , I hope that someone will be able to help me...here we
A 3 months ago I bought a Apple Headset for my iPhone 4s. After realising iPhone 5 there also been realeased new iPhone headset.http://static5.businessinsider.com/image/50451874eab8eab73c000005-960/iphone-5-h eadphones-rumor.jpg
http://static5.businessinsider.com/image/50451874eab8eab73c000005-960/iphone-5-h eadphones-rumor.jpgHere is a link but you probably all know what I mean.
To last couple days I was saying that Apple is the best, its Quality, Its something amazing, most amazing accessories I ever had.
But I plug this headset into the normal PC in a college library...quest what happen after that?
buttons for volume stop working I can only use the headset to listen to music now but I cant change any volume or double click to change the song.
Since I plugged in and unplugged it into PC they just do not work. (it was a first time when I plugged them into PC since I bought them).
I heard from a few people that they have the same, but you now, its not supposed to happen like that.
Such a simply stuff and "all that amaziness and greatness" its not the same now
Does anyone have solution for that?
I cant afford to speend another £30 for headset because I plugged them into PC and they do not work any more...
Please Help,
Regardless
Lukasz

@aion321
Welcome to the forum!
AFAIK you would need adapter similar to this one:http://www.currys.co.uk/gbuk/kit-5300auadp-3-5mm-audio-adapter-for-nokia-mobile-phones-07960271-pdt....
Happy to have helped forum with a Support Ratio = 42.5

Problem with the headset jack

I am unable to play audio in the earpiece in notebook c55-b5201. the notebook does not recognize the headset. the devices menu sound reproduction does not appear the option of the headset. I already installed and uninstalled the driver and the problem still remains

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
- Peter

2.6.33 problems with bluetooth headset

I have been using blueman+pulse to get a bluetooth headset working, which has been a great combination but now with 2.6.33 it doesn't work with any of my two Arch boxes and crashes pulseaudio in /var/log/everything.log it says
Apr 10 14:08:26 pluto bluetoothd[3960]: Disconnected from 7A:11:63:00:5E:10, /org/bluez/3960/hci0/dev_7A_11_63_00_5E_10
Apr 10 14:08:41 pluto bluetoothd[3960]: link_key_request (sba=00:25:56:D9:26:57, dba=7A:11:63:00:5E:10)
Apr 10 14:08:49 pluto kernel: btusb_isoc_complete: hci0 corrupted SCO packet
Apr 10 14:08:49 pluto kernel: btusb_isoc_complete: hci0 corrupted SCO packet
Apr 10 14:08:49 pluto kernel: hci_scodata_packet: hci0 SCO packet for unknown connection handle 0
Apr 10 14:08:49 pluto kernel: hci_scodata_packet: hci0 SCO packet for unknown connection handle 0
Apr 10 14:08:49 pluto kernel: hci_scodata_packet: hci0 SCO packet for unknown connection handle 0
Apr 10 14:08:49 pluto kernel: hci_scodata_packet: hci0 SCO packet for unknown connection handle 0
Apr 10 14:08:49 pluto kernel: hci_scodata_packet: hci0 SCO packet for unknown connection handle 0
Apr 10 14:08:49 pluto kernel: hci_scodata_packet: hci0 SCO packet for unknown connection handle 0
Apr 10 14:08:49 pluto kernel: hci_scodata_packet: hci0 SCO packet for unknown connection handle 0
Apr 10 14:08:49 pluto kernel: hci_scodata_packet: hci0 SCO packet for unknown connection handle 0
Apr 10 14:08:49 pluto kernel: hci_scodata_packet: hci0 SCO packet for unknown connection handle 0
Apr 10 14:08:49 pluto kernel: hci_scodata_packet: hci0 SCO packet for unknown connection handle 0

Spacenick wrote:It seems it fixed itself on my main system, got some problems on the laptop still but that might have todo with my stupidity in switching from KDEmod to Xfce which is now run directly with startx... and it seems it's important when using my blueman+pulse combination to NOT use padevchooser to select the headset.
There's a few things here, one is you probably need ck-launch, since pulseaudio depends on consolekit running.
Secondly, padevchooser is deprecated (read, avoid under all circumstances) upstream. Use pavucontrol instead.

Problems with logitech headset

Similar Messages

Maybe you are looking for