Problems with mapping after bundling messages into one XML-file

Hi all,
Case 1: one DebMas IDoc ==> XI ==> one XML-file : no problems with mapping.
Case 2: several DebMas IDoc's ==> XI ==> one XML-file : problems with mapping.
Explanation:
Incoming DebMas IDoc's:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 3 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 4 : Customer Master Partner Functions (E1KNVPM).
After bundling into one XML-file:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : no Customer Master Partner Functions (E1KNVPM) !!!!
Businesspartner 3 : Customer Master Partner Functions of Bp 2 (E1KNVPM) !!!!.
Businesspartner 4 : Customer Master Partner Functions of Bp 3 (E1KNVPM) !!!!.
All the payloads of the IDoc's are correct.
In the message mapping we use a Container for the Partner Functions (shown as below)
Is this a serious bug in the mapping of SAP XI ?
Does anyone knows how to solve this serious problem.
E1KNVVM -
> Partner_Container
E1KNVPM -
> Partner
PARVW -
> ParnerRole
KUNN2 -
> PartnerNumber
Regards,
Theo Pijlman

Hi,
Example:
Input idoc has field F1 with occurence 0..unbnd
My input values for field F1 is
1
none
2
3
Say, I have a mapping, F1---->TargetF1
In the target only 3 TargetF1s will be created for the values 1,2,3 and nothing will be created for the field F1 with no value.
To overcome this, use collapse contexts.
F1->collapsecontexts>TargetF1
This way, the TargetF1 fields created will have the following values:
1
blank
2
3
Collapse contexts makes sure that a target is created, even if there is a context change specified at the source.
Hope this is clear.
Regards,
Smitha.

Similar Messages

Problems with Integrating SRM, ESS/MSS into one portal 7.01

We are having major problems with integrating SRM, ESS/MSS into one portal 7.01?
Do we need to have a support portal for each.
We created test users for systems but sometimes we lose the users for no apparrent reasons. Very strange. Please advise and if you have new documentation regarding SAP Portal Authorization it will be helpful.

Hi
Please search on SDN for integrating SRM, ESS/MSS in Portal.
Regards
Arun

Problem with mapping parameter when specified through an XML config file

I have decided to attept to stipulate UDT mapping parameters from C# to Oracle in the AppConfig File.
The original code (which worked) was as follows:
namespace RoyalLondon.Processes.Oracle.Dto
[OracleCustomTypeMappingAttribute("TEST_SCHEMA.T_PROJECT_CODE_CHANGES")]
class ProjectCodeChangeTableFactory : TableFactoryTemplate<ProjectCodeChangeTableDTO>
So, I've commented out the [OracleCustomTypeMappingAttribute line and added the following into the config file:
<oracle.dataaccess.client>
    <settings>
      <add name="ProjectCodeChangeTableDTO"
       value="udtMapping factoryName='RoyalLondon.Processes.Oracle.Dto.ProjectCodeChangeTableFactory, RoyalLondon.Processes, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'
                         typeName='T_PROJECT_CODE_CHANGES'
                         schemaName='TEST_CON_DEV'"/>
    </settings>
</oracle.dataaccess.client>
This yields the following error message:
Unhandled Exception: System.InvalidOperationException: Custom type mapping for ' RoyalLondon.Processes.Oracle.Dto.ProjectCodeChangeTableDTO' is not specified or is invalid.
All the documentation I have read suggest that this ought to be ok. Is there anything obvious I am missing?

ummm, nevermind.
Turns out I hadn't updated the list of files that went in my servlet's jar file. I was recompiling the jar file successfully each time, but the list of files being included needed to contain a new class. This was a really stupid mistake on my part.
Just one of those things that I was bound to solve as soon as I broke down and posted something on the web. Sort of like taking your umbrella with you to ensure that it won't rain.
If anyone is reading this I am sorry I wasted your time.
Jon

A DIFFERENT problem with Maps after Hard Reset

Was advised to hard reset my phone after it started going crazy with data which I did using the advised *#7something# method.
Nokia Maps is fortunately still there upon reset. Phew. Although when I open it it starts downloading mad amounts of data.
All my maps are gone. it appears my mass memory got kind of messed up in the reset - it deleted a lot of the data off the mass memory, but left some of it. Example - my music files all went, but the directory structure remained. My photos remained, but Nokia doesn't know when they were taken.
I have tried connecting my phone to my PC and opening maps in Ovi Suite ... and it says 'cannot find maps or voice guidance files in your device', and I appear to have no option to re add them.
There is an 'open help' link below the message ... which opens a blank help page in my browser. Useful.
Can anyone help?

This has occurred the entire time I have owned the iPod. I only discovered iLyrics about 2 months ago. I don't believe iLyrics is to blame.
In general, the lyrics are in English and do not have special characters. This is a good suggestion though. I'm going to pay close attention to see if I can find any weird HTML bits showing up. It seems to occur about 70% of the time. I've assumed that it is completely random, so I'm going to pay closer attention to see if some songs work 100% of the time. Interestingly, it never goes wrong 100% of the time either. It sometimes takes 4 or 5 tries, but eventually I'll be able to scroll through the entire song.
I'm getting the impression that this is NOT a common problem....

Question: map the whole source message into one field in the target.

Hi Friends,
Is there a way to populate the whole source message into one of the fields in the target message?
I am trying to do this in message mapping. Guide if this could be done in any other way or is there a way to do it in message mapping.
Waiting for your valuable guidance,
Regards,
Lakshmi

Hi Friends,
I tried to convert the source message into a string using XSLT mapping. It was successful, however i need to have the source message in XML format and not in any other format. This is because, I am mapping the source XML into a field in a WSDL. The webservice requires the entire source message be inside a field called "Request" in the WSDL (it is like XML inside another XML).
Is there any way to do this? Please suggest.. (Im not good at java programming... may be i dont know)

Problem with maps on e72

Hi everyone
I've got a problem with maps on my E72.
I've seen advert that Nokia is going to let everyone use maps for free on selected models.
I was going to buy Sat Nav for whole Europe as I travel a lot and I was going to change my old N95. I thought I could do both in one new phone. Checked all the available models and chose E72. It said it;s got GPS and you don't need to use your network and spend fortune on internet connection. Got it from eBay for £270.
I installed Ovi Maps from internet and the first thing that surprised me was it had 'only' 7-8MB.
I thought that something was wrong, maps for 72 countries couldn't be 8MB big.
After some time I managed to set my e72 up. Put my Maps on and...
It takes loads of time to find GPS connection, but the worst thing is if I type lets say Paris it doesn't find anything. Map has wholes, like suddenly the roads end and there's nothing there.
My question is what am I doing wrong? Do I need to download something more? I didn't have any maps on my phone when I bought it. Where can I find them?
If someone could help I'd appreciate it.
Thanks a lot.

I forgot to mention that when I choose a destination it keeps saying Calculating route all the time. I waited about 15 minutesand it didn't calculate anything.

Append two message into one message in BPM

hi,
i have to receive two different outbound message interface in fork step. as soon as two message received
i have to append those message to one message as below;
A message
1001 AAAA BBBB CCCCC
1002 DDDD BBBB DDDDD
B message
1003 CCCC 1321 12213
1004 DAFD DDDD DDDDD
1005 EDDD DDDD DDDDD
target message for C
1001 AAAA BBBB CCCCC
1002 DDDD BBBB DDDDD
1003 CCCC 1321 12213
1004 DAFD DDDD DDDDD
1005 EDDD DDDD DDDDD
and then i have to send C
is it possible on BPM? i think not mapping issue and correlation.
how can i append two abstract message to one abstract message?
thanks
venjamin

hi all,
BpmPatternCollectMessageToBeCollected in basis in ir is not multi-row, this message type structure is just for individual message..
in my case, source message type can be received multi record in row in once.
so, what i want to say is interface mapping regarding
appending two abs message into one inbound message for transformation.
if it is possible, we may not need to container operation step because we already have bundled message in target abstract message. we can just send target abstract message.
if it is not possible, how do you map to use in transformation step? and configure container operation?
container operation should be appened from one structure message into one multi message.
does it make sense?
thanks
venjamin

Combining two messages into one

Hello,
I have a mapping issue, I have a business process in which I have to combine two messages into one.
To do so, I have defined a message mapping in which there are two source message types, and one target message type.
When testing the message mapping in the IR, it works fine, but when I define and test an interface mapping with that same message mapping, I receive this error message:
"Cannot produce target element /ns0:Messages/ns0Message1/MY_IDOC_TYPE/MY_SEGMENT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd."
What am I doing wrong ?
How am I supposed to combine two messages into one ?
Thanks,
Elad.

Hi Elad,
Just see if you have included both you source message interfaces and one target nessage interface correctly in while doing your interface mapping.....
The most common mistake made when we do scenarios which include combination of two source message types into one target type are:
- we forget to include both the source message interfaces.
- or we interchange between one of the source message interface with the target.
Just see if either of the 2 is aplicable in your case and just activate all components as and when you create them..
Regards,
abhy

Error Message When Merging Multiple PDF Files into One PDF File

Good Morning,
I have a problem with Adobe Acrobat 9 Pro. I am trying to merge/combine multiple PDF files into one PDF file, but I keep receiving this error message:
Does anyone have a fix for this? Thank you!

To fix:
Provide a unique name for each form field. This includes the individual PDFs fields. As you intend to combine/merge no field name in each of the individual PDFs can be the same.
Be well...

Problem with Map Loader 3.0.28.0 and 5800XM

Hi all, i have a problem with maps upload to my mobile, whenever i start Map Loader i see a message: You have connected at least one phone (Soft) without a Maps drive. Either you are using an old Map version - .. - or have never started your Maps application... I use USB PC-Suite mode, I have had run Maps application on my phone before i try to connect Map Loader, the Maps version installed on the phone is v3.03 10wk01 b05 - so that's obviously not a reason!! Now i can't install new maps anymore - i just can click this error window away and choose some maps, they would be downloaded from the Internet, but they would not appear on my mobile! With a previous version of the map loader (don't know the version number any more, and previous maps version on the phone, i have no problem) I also need a link to Maps Updater due the Nokia site malfunction - couldn't find this software anymore.... sorry my poor english :-)
Nokia users - the biggest beta test community of the world!

Problem solved! The STUPID software searchs for ALL mass storage devices attached to your computer, so I got error messages all the time until I unplug my USB Hard drive.
Thank you Nokia guys, your were great help by solving this problem .....
By the way, the STUPID software doesn't shows the maps that would be all ready installed on the phone, and you couldn't say that the upload of the maps was really successful until you waisting your time watching the progress bar to the end.
I wouldn't be suprise if you can install the same map twice so it takes the twice space....
regards, and sorry for my poor english
Nokia users - the biggest beta test community of the world!

Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it?

Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?

Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha

Problem with maps in Mavericks on iMac

I have a problem with my Maps on Mavericks.
I can open it just fine, no crash or whatever but the map itself just won't load, whatever mode it is on. Here is the screenshot of my Maps:
As you can see, it just stays blank all the time.
I'm also running Parallels 9 and don't know if that has something to do with problem.

Spent days trying various fixes, but this is the one that did it for me. Thanks!
livetowin
Re: Problem with maps in Mavericks on iMac
Dec 8, 2013 7:14 PM (in response to robin1943)
Try this
Since my date and time were incorrect and imessage was not working as well, I tried this
1. Go to system preferences and click date and time
2. Select date and time tab
3. Uncheck "set date and time automatically" and manually enter the correct time
4. Go to time zone tab and uncheck the box there too
5. Go back to date and time tab and now check the box "set date and time automatically"
6. Then check the box in time zone as well
Now open maps and see if it works!

Problems with Mail after upgrading to 10.9.1

I am running into problems with Mail after installing 10.9.1. I had NO problems with Mail prior to this update.
Problems I have encountered so far are:
- I don't receive some e-mails on my Gmail account.
- I have sent e-mails that supposedly got "sent" but do not show up in my Sent box both on mail and on web Gmail. My Outbox is empty also.
Has anyone encountered the same problems and found a solution?
Thanks in advance!

Yes Paul I have, but no solution. I cannot send email. My ISP uses a smtp mail server for sending and It will not log in. Have had ISP on phone and checked all settings. Can only put it down to Mavericks.
It worked OK for a week after upgrading then stopped. So now having to use web mail to send email.
Strange thing is I receive mail OK, just cant send.

Problem with mapping the Entity beans onto database tables

Hi,
I got a problem with mapping the Entity beans onto database tables. Here are what I did:
First Step:
asant capture-schema
Second Step:
capture-schema -driver com.pointbase.jdbc.jdbcUniversalDriver -dburl jdbc:pointbase:server://localhost/sun-appserv-samples -username pbPublic -password pbpublic -table APPLICANT -table APPLICANTSKILL -table CUSTOMER -table LOCATION -table job -table JOBSKILL -table SKILL -out build/agency.dbschema
The first step was fine. But, in the second step, I got the error message as follow:
using dburl:jdbc:pointbase:server://localhost/sun-appserv-samples
using username:pbPublic
using password:pbpublic
using driver:com.pointbase.jdbc.jdbcUniversalDriver
using schemaname:null
using output file:build/agency.dbschema
JDO71100: Failed to find a class. Verify that the class is available on your CLASSPATH
java.lang.ClassNotFoundException: com.pointbase.jdbc.jdbcUniversalDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:141)
at com.sun.forte4j.modules.dbmodel.jdbcimpl.ConnectionProvider.<init>(Co
nnectionProvider.java:38)
at com.sun.jdo.api.persistence.mapping.ejb.CaptureSchema.main(CaptureSch
ema.java:130)
at com.sun.jdo.spi.persistence.support.ejb.util.CaptureSchemaWrapper.mai
n(CaptureSchemaWrapper.java:29)
Thanks for your help!

You need to add the pbclient.jar or some similar name like that, in the CalssPath.

I am having problem with iMessage after updating my 5s to iOS 8.0.2

I am having problem with iMessage after updating my 5s to iOS 8.0.2. I cannot send any text by iMessage anymore. My friend tries to text me and it did not go through

Hello Huyen,
Thank you for using Apple Support Communities.
You can use the following article to troubleshoot Messages:
iOS: Troubleshooting Messages
Regards,
Jeff D.

Problems with mapping after bundling messages into one XML-file

Similar Messages

Maybe you are looking for