Problems with MSI K7N2 DELTA ILSR

I set my bios to high performance defaults and now when i turn it on the diagnosis LED's say that the processor, then the RAM are damaged, but this isnt the case as i have tested them in a different machine and they are ok. I have tried clearing the CMOS using the jumpers but nothing happens. I have read on here that the way to solve this problem is to set the CPU FSB jumper to 100mhz... could somebody please tell me if there are any other usjestions about how to solve this please...
Nick

Quote
Originally posted by Nerdyjim
cheers.. is it worth going for a 3200+ Athlon, or should i save the money and go for a 3000+ Athlon??
Get something like a 2700+, I've got one, if I OC the FSB by 5, I achieve the performance of a 3200+, I can go higher, but I don't want to until I get a volcano 12, soon.

Similar Messages

Internet Connection Problem on MSI K7N2-Delta-ILSR

Hi, recently I buy an MSI K7N2-Delta-ILSR.I have a problem when I was trying to connect to the Internet through my modem on WinXP Pro SP1. It bring me up an error message 678 ( The computer that was tried to connect did not respond...). I have also a second hard disk with Mel windows. On disk the disk with the Mel I don’t have any problem with the internet connection. All my settings are same on WInXP pro and Mel.I have checked I thousand times. My computer configuration is:
Athlon XP 2400+ Overclocked to 2205MHz
2 memory modules of 256MB 400 manufactured by Samsung
TharmalTake Volcano 11
Triplex Xabre 400 PRO with 128MB
Hercules Gamesurrround Fortissimo III 7.1
Microcom InPorte Home modem 56k
Leadtek winfast 2000 (TV/FM radio)
Acard SCSI controller (Acard AEC-6710D) for my scanner
WesternDigital WD800 GB
WesternDigital 15.3gb
Bios ver.7.4
Can anyone help me?

Quote
Originally posted by Roger Wilco
Hmmmmm, I\'m also having a problem with the onboard lan of the K7N2 Delta.
I have an ADSL connection, and have an Alcatel SpeedTouch Home modem.
I pretty much get the same error as SiliconMan (The computer that was tried to connect did not respond...)
I ended up giving up on it for the time being, just using my SMC NIC. Would be quite interested in finding out what the problem is though.
Anyone else in the same boat?
Hi,
Your problem is not the same, SiliconMan is trying to connect with a dial-up modem not LAN. Your problem sounds like it may be configuration, do a search on this post, I'm sure you will find people with onboard LAN troubles. It's hard to troubleshoot though since you didn't provide any info about your computer. Good Luck
Rob

G4Ti4200-VTD64 voltage incompatibility with MSI K7N2 Delta-ILSR??

Hello,
I have the MSI G4Ti4200-VTD64 (4X) video card.. I want to upgrade my motherboard to K7N2 Delta-ILSR. Is there any voltage incompatibility?? I heard that new mother boards will support only AGP 1.5V. Is the AGP voltage of K7N2 Delta-ILSR 1.5volts?? Is my video card compatible with this voltage?? I really want to retain my current video card as I am quite satisfied with it and I'm not willing to invest on a new one at the moment. If there is an incompatibility could you suggest another Socket A MB with good performance and SATA RAID support.
Thanks in advance
Regards,
Joseph

Joseph,
All 4X Vid Cards work on all 4X and 8X mobos. All 4X mobos work with all 4X and 8X Vid Cards.
Take Care,
Richard

Lock Ups with MSI K7N2 Delta-ILSR [Resolved] thnx!

Well this is a first for me and it is driving me nucking futs !,
I have been building my own pc's for at least 10 years now and never had a problem where I have even needed to come to a forum like this. So as I see there are some very helpful and knowledgable peeps (nice work guys) here I thought I would ask as I have read through all stickies etc... and have not actually seen an answer to the problems of locking up. I am fast forming the opinion that this motherboard has a serious problem that MSI have not fixed yet. Anyway here is some info on the spec and what I have tried so far :
Have checked for viruses...
Did a fresh format and re-install...
Unplugged all that is not essential to run...
Symptoms..
Cannot write files to make a DVD in any authoring program.. it locks up after about 5 minutes
Locks up in most Games, some run for 5 mins then other times run for hours
Cannot run some setup.exe files (Like Zone Alarm Pro)
Sometimes (locks up just surfing)
Microsoft Word seems to mess up a lot and have to run the repair option..
IRQ Settings
IRQ 0   System timer   OK
IRQ 1   Easy Internet Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 10   NVIDIA nForce PCI System Management   OK
IRQ 13   Numeric data processor   OK
IRQ 14   NVIDIA nForce 2 ATA Controller (v2.5)   OK
IRQ 15   NVIDIA nForce 2 ATA Controller (v2.5)   OK
IRQ 17   Creative SB Audigy   OK
IRQ 18   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 18   WinXP Promise FastTrak 376/378 (tm) Controller   OK
IRQ 19   NVIDIA GeForce4 Ti 4600   OK
IRQ 20   Standard OpenHCD USB Host Controller   OK
IRQ 21   NVIDIA nForce Networking Controller   OK
IRQ 22   Standard OpenHCD USB Host Controller   OK
Readings from MSI PC Alert 4
CPU Temp    : 48 C
System Temp    : 33 C
Vcore       : 1.63
3.3V       : 3.31
+5v       : 5.00
+12v       : 11.70
I am about seriously considering giving this board some cement legs and drowning it ! This is my first (and probably last) MSI board and cannot believe the problems so many seem to have. Maybe best and quickest option is to do just that and go buy a decent board.
Any help much appreciated.

Hi,
First of all thanks to all for the help, and CJLittle...LMAO ! My car is a Scooby and a nice blue paint job ! Believe it or not they assured me all this would work.. I bought it in one package and even questioned it. Also to be fair up until then they had always been very good... shows they have no zero about 3200XP 200 fsbetc... When I went back with the power supply and told them they changed it out and let me off on the extra money it should have been.
The crashes are as follows :-
[list=1]
Locks up after random amounts of time in games, sometimes dont even get to load it up at all, other times I can play 2 hours. When the games lock up usually there is a high pitch squeal and can only get out of it by reset or power off.
I cannot install Zone Alarm Pro or Agnitum Outpost are 2 anyway (there are others) these just come up with the installer screen and hangs there, I have to go to Task Manager to close them down, unlike the lock up in games.
The cooler is the Coolermaster Jet... and the temperature is more than acceptable (right now is 44 C) so I cannot see that at all being a factor.
leds are on on the d bracket when it locks, I did not know of this function and will check it out. Thanks for that tip.[/list=1]
Question from me: would the 2700 RAM cause these lockups ? I would have thought it would just not work at all ? If this is possible then I will go and change out the RAM as tuning it down to 166 (if it is possible) does not appeal to me ! But yes it may show what the problem is.
Thanks again, will see what happens...

Low FSB problem on MSI K7N2 Delta-ILSR.

Today is the first day this happened, and I don't know why it did it. I've had this for 5 days with no such problem like this B4.
Here goes... in my BIOS, I have the FSB set to 166(333), and the Ram synced with it. This afternoon I started up my computer and went into Aida32, and it said my FSB was at 157(314), it usually says 168(336).
Aida32 isn't lying, my clock was even gaining time. (That is the reasond I checked)
My question is, what would cause this?
Could it be bad power? A lousy start up?
Maybe the CPU? I've seen this happen on a couple other nForce2's I've had. Could it be nVidia's fault?
I just don't know were to start on troubleshooting this problem.
BioHaz

Quote
Originally posted by wrosensteel
I don\'t know that I would trust the software reading as much as the bios itself. There may be a glitch in the software code.
If it says the same when you go into the bios as Aida32 is reporting, you may have a defect somewhere on the board causing the issue. If not, uninstall your current version of Aida32 and try going back to the previous version and see what it reads.
That is what I first thought, but the real-time-clock is also running very fast when aida32 said it was 157, as you know the clock is FSB related.
I think I know what the problem is, and I'm almost sure it's power related. If I turn on my computer first then my monitor, my UPS overloads and shuts everything off plugged into the battery section of the UPS. To avoid this I have to turn on the monitor first, then the computer.
The day I started experiencing this problem, is the day that I turned on my computer first then the monitor, thus the UPS overloaded. So what I did to fix this, is I shut down my computer, switched off the PSU, unplugged the power cord, plugged it back in, turned the PSU on, then the computer on (monitor still was on), then it started it up and everything was back to normal. I've restarted my computer 10 times, and it's been working good ever since.
I'll keep you posted if I run into this problem again.
BioHaz

Msi k7n2 delta ilsr problem

hi i have this configuration on my pc:
antec true control 550 watts
msi k7n2 delta ilsr
kingston hyper x pc3700 2x512 mb
athlon xp 3200+
seagate 120 gb sata 7200.7 hd
ati radeon 9800 pro excalibur ice q
i have 2 problems : the first one is that sometimes windows display me a blue screen with certain problem related to ati2dg.dll i think that problem is beacause the video card so i decided to update the bios , in the live update page from msi says that the bios 7.6 fix a bug with ati vga cards but after flashing and updating to bios v7.6 that blue screen with the same error still appearing so i dont know what else to do to solve the problem and the second one is that when i start any game or make the processor to work a little mostly related with video stuff the case speaker start to beep and the pc lags until he restarts with no reason i really dont know why if u can help me thank you

Foxtrotccs,
In the BIOS try setting the AGP to 4X and disable Sidebanding. Then set the AGP Apeture to 256. See if that helps.
Make sure you are running the lastest nVidia nForce Drivers and the latest ATI Catalyst Drivers
Take Care,
Richard
P.S. There is still a possibility that the Kingston RAM is the problem.

MSI K7N2 Delta ILSR Memory problems

I'm trying to burn in a system in a 50 deg C (122 deg F) room for a minimum of 12 hours. The main system components are as follows:
Motherboard: MSI K7N2 Delta ILSR
CPU: AMD Athlon XP 2800+
Memory: 2x512 OCZ PC3200 EL
My problem is that the burn-in software continues to freeze up during the memory test. I've already contacted the software manufacturers and the software is stable. It's a problem with the way the motherboard handles the memory. I've tried putting the memory in dual channel configuration and changing the timing settings in the BIOS. The SPD settings are 2.5-3-3-7. Right now I have them at 3-4-3-8. It's a lot more stable than it was under the default settings but it still freezes up sometime after 7 hours. Unfortunately, I wasn't around when it froze so I don't know exactly how long it lasted. I can say that after 7 hours, it wasn't showing any slowdown in performance. If anyone could think of anything else I might be able to do to get the system stable, I would greatly appreciate it.

Thanks for the suggestions. The CPU FSB is 200, so it's already matched up there. And we have a ton of fans already. There are two in the front, 4 inside and 1 on the back. It's a custom case, 2u high. The power supply is oversized and more than adequate to provide the required power. I have four of these units running right now. Two with 2x512 sticks and two with 1x1024 sticks. For each combination, the memory clock speed for one is 166 and 200 for the other. I have been loosening up the memory timings trying to get the system stable, but it still isn't. If the power supply is good, and I'm unable to cool the system anymore due to limititions within the case, is there anything you can think of to stabilize the system. Maybe other settings in the BIOS or suggestions on how to go about getting good timings for the memory. Thanks.

MSI K7N2 Delta-ILSR (MS-6570) BSOD problems grrr

I recently purchased this board and although it is an awesome product, I'm having a problem with BSOD's when I play a game for a certain period of time
Specs:
MSI K7N2 Delta-ILSR (7.6 BIOS)
AMD Athlon XP 2800+ Barton
512MB (2x256MB) Samsung PC-2700 DDR memory (2.5-3-3-6 1T)
MSI 128MB GeForce4 Ti 4200 (4X AGP)
NVIDIA nForce on-board sound
Western Digital 80GB drive w/ 8MB cache
MSI X48 CD/CD-RW/DVD combo drive
Windows XP Professional SP1
PSU:
Turbolink 420watt (came with case)
+3.3V is 28A
+5V is 40A
+12V is 18A
So what happens is I get a STOP error during the game that shows the kmixer.sys driver as the culprit. Sometimes it's accompanied by PAGE_FAULT_IN_NON_PAGED_AREA too. I read somewhere that kmixer.sys has to do with windows audio and that it's a 3rd party driver issue or a memory issue. I'm using the latest NVIDIA 3.13 nForce platform drivers. I ran Memtest lastnight for 12 hours straight and 0 errors. I'm thinking the memory may not be compatible with the board nor dual channel, is this possible? I have also tried several different drivers for both video and chipset including MSI's own and I still get the kmixer.sys BSOD when playing games. My previous motherboard was an MSI KT3 Ultra2-R (MS-6380E) which I had no issues with. Any help would be greatly appreciated. Thank you in advance.
--Update--
I just tried to play a game with audio disabled and it crashed this time with DRIVER_IRQL_NOT_LESS_OR_EQUAL with nv4_mini.sys as the problem. My IRQ table shows some sharing, but device manager shows no conflicts.

Ok I tried running the DTM-CB3 module which is nForce2 approved at 3-4-4-11 2T timings and experienced the same result even at 2.6 and 2.7v. I tried both in dual-channel and same thing happened. However, I downloaded a program called Prime95 and ran the CPU torture test and the system returned a fatal error within the first few minutes. CPU Temp was at 57 C and the warning beep (set to 60C though) sounded intermittentley which is strange. I let it cool down then ran the torture test again and about 5min. later the system either seized completely or the program crashed. IE has also crashed randomly on me. I did this several times, before trying a different FSB/DRAM ratio. So I left the system at 200 FSB and used a 6:5 ratio so my memory was running at DDR333 and processor was a 3200+. I ran Prime95 again and the system locked up just as it did the other times. So after I did this a few times with consistent results. I went back and set the FSB to 166 and tried a 5:6 ratio so the memory was DDR400 and processor was the normal 2800+. I ran it again and to my suprise it passed all the tests and after an hour of this, I tried a game and that was perfectly fine as well. I checked the temps and CPU was only 45 C this time. So I'm thinking the processor can't handle anything above 50C or it's just plain overheating. I ordered a Thermaltake Silent Boost HSF today which is tested up to 3400+ so this should fix my problem. If not, then I'm going to replace the memory with a 512MB Geil PC3200 golden dragon dual-channel kit.

MSI K7N2 Delta ILSR (MS 6570) trouble With ATA card

Hi, i have major trubble.
Ihave two 300gb, two 120gb and two 80gb harddrives + 1 DVD burner and 1 CD burner with ultra DMA 100 PCI card and it works fine without using the sata or ide3 raid function. I purchased an new PCI ATA 133 card and the system won't boot. I have tried for an long time to get the raid function to work but wihtout results with my old ATA 100 card (it works when i unplugg the ide cable from ide3).
Is there anybody that knows with type off PCI ATA 133 card that works or how too coop whith this problem.
I've got the latest bios ver. 7.8 but no difference
AMD XP2800+
Kingston 2x512mb
ATI Saphire Radeon 9600pro 256mb
Soundblaster Live Value
XP pro sp2
MSI K7N2 Delta ILSR (MS 6570)

I went to JME-Data and purchased an
True430
ATX 430 Watt Power Supply with PFC
For AMD™ and Intel® systems including
Pentium® 4
Dedicated output circuitry
Voltage feedback
Antec Low NoiseTechnology
AQ3 - Antec 3 year parts & labor warranty
True430 is a 430 Watt 6-output, dual fan-cooled ATX12V (Baby AT or PS/2 Size) power supply designed for personal computer or industrial applications.
Its ATX12V compliance allows its use with the latest Pentium 4 processors while its backward compatibility ensures its usability with any ATX-based AMD™or Intel® system
The prise 1099:-
And everything works great, Thank you very much for the tip. :-)
No more blue screen and it even works with my memory Kingston Value Ram 2x512 ddr400.
Is it possible to change the FSB from 166 to 200, and what should i think about before action. Like i said before i have an xp2800+
Alltså är det möjligt att få cpu gå på samma frekvens som minnena om man ökar FSB har några tip så är jag tacksam.
Att en nätdel kan göra så mycket helt otroligt TUSEN TACK för hjälpen till och med cpu tempen har sänkts från ca 56 till 46 grader fattar ingenting.

Someone plz help me with my k7n2 delta-ilsr

Hey everyone,
I just put my sytem togother and ran into a problem. I got the system to boot up just fine. It was not until I tried installing windows xp proffesional that I ran into problems. The installation process runs pretty smoothly, until the computer reboots to run windows for the first time. After it reboots the windows logo appears and the after 2 seconds or so, a blue screen appears saying that windows was shut down to prevent any damage to my computer. I have never encountered this problem before when I built other systems. The screen suggests that I should check my HDD's for viruses or check to see if they are configured correctly. The HDD's are SATA and I have them set up in RAID 0 mode and yeah I installed the RAID drivers during the installation process. Thinking that I had made mistake setting up the SATA drives, tried installing windows using a regular IDE hard drive and it gave the same message. I am stumped anybody have any ideas of what I might be doing wrong? Any help would be appreciated . My system specs are below.
MSI k7n2 delta-ilsr mobo
AMD 3000+ Athlon XP cpu (333 fsb)
ATI Raedon 9000 ( I know it's crappy , I'm still saving up for the ATI all in wonder 9800 )
x1 kingston 512mb pc3200 DIMM
x2 maxtor 80gb maxtor hdd's
x1 regular cd-rom drive
x1 floppy drive
420w raidmax psu
(+3.3v = 26A, +5v = 32A, +12v=13A)

Memory that comes with timing of 5 2 2 2 or 6 2 2 2 or usally winbond BH-5 memory chips. Ones with 5 3 2 2 or CH-5 winbond chips. The BH-5 chips overclock a little better than the CH-5. (Muskin uses BH-5 winbond in there black ram)
Winbond is no longer making BH-5 chips but is going to make a limited run of them as demend is high for them.
The first number shown here is the Traz and it controls the flush timing bench testing is showing that a higher number of 9, 10 or 11 or getting better bench results than the 6 or 5. Thats with Dual Channel memory.
The timing you show probly should be something like 8 3 3 3 or 8 3 3 2.5 unless it is there faster Dual channel ram.
The timing numbers can also appear like this 2 2 2 5 the high number is the Traz either way.
Look on your memory manufactor web site for the timing that if should run at also look at the voltage as this can make a big differance.

Strange phantom restarts on MSI K7N2 Delta ILSR

Just wanted to see if I could get opinions on this. My MSI K7N2 Delta ILSR mobo runs real nice now, but still, on occasion, very rare and intermittently, it will just restart. Not likely a heat issue, as the temps are nice and low. Also, not just happenning when I'm playing a game or anything strenuous. Did it once while checking email, once during install of an MS Office program, and once during a game. Could it be my old Gforce 2 MX 200 video card, as the picture sometimes gets wavy (like fine waves on an ocean), and the old computer it was in did similar things, or is it common with this mobo.
MSI K7N2 Delta ILSR
Athlon XP 2500+ Barton
1026 MB Kingston DDR RAM (2x512 Dual)
Gforce 2 MX 200 AGP 4x
WD 60 GB 7200 RPM

I had errors on test 4 not 5 with Winbond 2-512 Dual Channel called Hardcore Cooling and they said that getting errors with memtest86 may not mean that the ram is defective, it may not be compatible with the memory comtrol and they had me RMA it back. I also was not able to run the ram stable at there advertized rate of 6 2 2 2 it was only stable at 8 3 3 2.5
I replaced it with OCZ after talking to there Tech support people about compatiblety problems with the Nvidia chipset. Sense I installed the OCZ I only had one ram reboot and when I checked I was running the voltage at 2.5 and OCZ said that I should be running at 2.6. They also said that I could run it up to 2.8 with no worry.
Look on manufactor web site to see what ram timing yours should be running at and what voltage, Auto setting in Bios is not always the best setting.
If it still not stable at manufactor spec than I'd talk to who ever you bought it from about replacing it or refund and buy something thats on the Nvidia compatible list.
Most ram manufactors have a list of motherboards that there ram will work on but sometimes the newer boards like K7N2 or not listed yet as still working that out.

Data corruption on MSI K7N2 Delta ILSR

Hi all,
Just got my new MSI K7N2 Delta ILSR up and running.
Got some issues with the memory running at 200mhz while the Barton core of my Athlon Xp 2600+ was running 166mhz, this had to be 1:1 (thx forum )
While running the default bios settings with cpu/mem at 166/166 fsb everything is stable as hell. I have been running Prime95 for 2 days now and using the system for dvd ripping/encoding, UT2004 gaming etc.
Then the overclocking began I'm using the standard AMD cooler that came with my boxed Xp2600+ so I didn't expect an FSB of 200mhz.
I stopped at an FSB of 190mhz...been crunching Prime95 for 18 hours now and again very stable.
Now comes the problem : Sometimes I get crc errors when installing a game or decrypting a dvd!! But how can this be? Prime95 is stable at this 190fsb overclock.
When using an FSB of 166mhz no data corruption or crc errors.
What can this be? It's not the cables because they're all the same as in my old setup which was running (ahum...walking) stable. PCI/AGP speeds are locked when overclocking...
Only thing I can think of is the power supply. I've read in a warning post from Bas that the Q-Tec 550w psu I have is crap. So my guess is PSU, but maybe it's something else I'm forgetting...Any suggestions??
The stupid thing is when I'm not overclocking I don't have the data corruption problems, but I'm still using the same crappy Q-Tec 550w PSU.
Help!
gr,
Remco

Hmmm, that's curious. On the MSI K7N2 Delta ILSR product page Kingston memory is recommended
Ok, did a Memtest86 v1.11 pass at cpu/dimm 166/166 - no problems whatsoever. I think using Prime95 would have revealed memory problems...but will do another pass with cpu/dimm at 190/190.
Can overclocking affect the Promise Raid Controller?? It should be locked like the PCI/AGP but who knows...
Well, I still have to replace my PSU but I'm not 100% sure that this is the problem. What PSU would you recommend? ...and I'm also thinking about replacing the standard CPU cooler, any advice is welcome
gr,
Remco

FLASH BIOS MSI K7N2 Delta-ILSR ????????

I am trying to flash the BIOS of my K7N2 Delta-ILSR board. I follwed all the instructions from the MSI Web but I can't get it going. I booted from Win ME & Win98 but could not get into C: drive. So I used Command Prompt from Window to get into the C: drive and follwed the Flash Bios Procedures. I keep getting the message: AwdFlash No Support WinNT/2000/XP OS
I got problem with the temp after I updated the BIOS. I wanted to flash it back to the old Bios. Please help me out
Thank you
My system:
WinXP Pro
MSI K7N2 Delta-ILSR
AMD 2500+
1 GB DR3200
Seagate 160 SATA

http://www.msi.com.tw/html/support/bios/note/ntfs.htm

Sudden Restarts MSI K7n2 DELTA ILSR

I've had this setup for about a year now.
Sudden restarts now plague my system, no virus found per NAV 2004, ran processor burn in wizard, SISOFT sandra, on cpu arithmetic and cpu multimedia setting, 100 cycles (no problems) windows memtest ran with no errors via start up disk full cycle of tests.
Have reloaded video drivers,to no avail, this happens about once a week, any ideas????
MSI k7n2 delta ILSR Bios version 7.7
1.5 Gig Micron PC 3200 (512x3) RAM supporting dual channel stock voltage
mixed bag o ram, crucial, micron technology, and, patriot
Athlon xp 2500 stock voltage
SLK 900A heatsink with 80 mm tornado (temps at idle 35-38c) (42 load)
Creative SB Live
Nvidia 256 mb asylum video card GE FORCE USR DATA PCI FAX Modem (V92) 5610b
Hercules 420W PS
All drivers are up to date and windows update run regularly (Win XP Pro SP2)
[/COLOR]

Quote
Originally posted by scooter787b
well for one thing the k7n2 series can only support 2 pc3200 dimms,
are you really sure ?
my motherboard which is rather old now supports 3 pc3200 dimms.
norton antivirus is CRAP.
i stopped using it when i found my harddrive was full of viruses.
try avg6 for example which is free.

MSI K8T Neo2 F vs. MSI K7N2 Delta ILSR

Hi there !
I have an amd Athlon XP 3200+ overheating problem, and contacted the technical support of the shop where the processor and CPU was coming from.
Since they do not have any XP 3200+ to replace mine, they propose me to replace fro free :
- the XP 3200+ by an AMD Athlon 64 3200+
- my actual MSI K7N2 delta ILSR by an MSI K8T Neo2 F
... and this for free.
Since I do not know this new motherboard that has been proposed, I'd like to have advice on if this is a good deal ?!?
My actual system has :
- an Aluminium case with 2x 12cm FAN's
- 2 IDE hard drives
- 1 SATA hard drive
- TWINX Corsair XMS 2x256MB PC 3200L (Extreme low latency)
- an AGP 8x video card
- An Antec True Power 480W.
will the new motherboard fit with this configuration?
Many thanks for your input !

Not really, unless you really want to oc your cpu. The K8T boards aren't that good in OC-ing. But still, some is possible and you'll be sure that the board is as steady as a rock.
For a moment I thought you were talking about a Neo board ... but I just saw it's a Neo2. That means Socket 939 -> dual channel RAM.
The only risk you have now, is that your RAM won't work in dual channel with the CPU. But that's not really a board-problem, more a CPU/RAM-controller related problem. But then, it's still a great offer and chances are good that it will work. If you run into any trouble, RAM-related, just flash bios to version 1.9 and you will probably be just fine.

Problems with MSI K7N2 DELTA ILSR

Similar Messages

Maybe you are looking for