Problems with new catalyst

I Have a problem with newer catalyst version 4.7 and 4.8..sometimes the screen goes totally black,it's like the montitor goes into sleep mode or screensaver.
This can happen at startup or after while the only thing i can do is to restart the computer by turning it off(or reset).
With cat 4.6 and the drivers before everything works fine.
I tried fastwrites on/off(no good)
Disable Vpu recover(no good)
Raise agp voltage to 1.6V(no good)
I also tried asus own driver but the same thing happens.
However i came to think of if there is anything i should change in power managment in bios because the comp won't wake up from sleep mode when pushing on the keyboard or moving the mouse(this is with cat 4.6 wich works great otherwise)
I hope someone have an answer to my mysterious problem

Quote
Originally posted by Ycore
This is my exact problem. Computer has been running ROCK solid for the last few months with 4.7 catalysts. I install the 4.8's, reboot, load up Doom 3, and the computer hard locks within seconds of 3D mode being activated. Reboot, run 3dmark2001, and again, hard lock within a few minutes into the demo (screen goes black into power savings). At this point I figure it's a problem with the 4.8's, so I reinstall the 4.7's, fire up Doom 3, and IT FREEZES AGAIN.
At this point, I'm loathing my decision to mess with my vid drivers at all, and wondering how come the vid card has started to lock up in 3d.. I start messing with all sorts of settings.. Finally, tuning the AGP speed from 8X to 4X totally resolved the freezes.
QUESTION: WHY ALL OF A SUDDEN DID 8X AGP STOP WORKING???
AMD 64 3200+
K8T-NEO
Antec 430W PSU
ATI RADEON 9600 PRO AGP
SB LIVE
1GB CORSAIR C2 DDR (2x512)
Lite-ON DVD/CD+RW
Windows XP SP2
I have never got my 8x AGP to work, its always hard locks when I use it...dunno why I don't really care. When I upgrade to a pure 8x AGP card i might if it still happens. Actually if it continues to happen there is a good chance I will get rid of this board and get the nforce probable. But at any rate, setting AGP to 4x has always fixed every video card problem I have had since putting this computer together. So try that I suspect it will fix your problem as well.
Also note that we have very similar setup's so try it and let us know if that works out for you.

Similar Messages

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

Wifi problems with new ipad

I'm trying to learn how to correct wifi problems with new iPad. It is the wifi only, 64GB model. I want to be able to use it at work, where we have a great wifi network. I can usually connect to our network with no problem, but after an hour or so my iPad loses the network. When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network. My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi.
I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question. I can't think of any other methods that are available to an end user to correct the problem.
I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms.
Can anyone offer any advice here? This is quite frustrating.

No problem! Have a read at this most interesting article which has special significance as regards your models!
http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
created by Texas Mac Man in Using iPad - View the full discussion
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom ;)

List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

Problem with Cisco Catalyst 2960

I've got a problem with the Catalyst 2960 / 24TCL switch. The Flash-directory was empty. After I copy with xmodem the firmware bin-file into the flash-directory and installed it .. I miss the HTML-Directory. Can somebody tell me how I can get it back?

SSwitch3#test cable-diagnostics tdr int g1/0/16
TDR test started on interface Gi1/0/16
A TDR test can take a few seconds to run on an interface
Use 'show cable-diagnostics tdr' to read the TDR results.
SSwitch3#show cable-diagnostics tdr int g1/0/16
TDR test last run on: June 27 13:39:21
Interface Speed Local pair Pair length        Remote pair Pair status
Gi1/0/16 1000M Pair A     52   +/- 10 meters Pair A      Normal
                Pair B     52   +/- 10 meters Pair B      Normal
                Pair C     52   +/- 10 meters Pair C      Normal
                Pair D     52   +/- 10 meters Pair D      Normal
SSwitch3#

Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.?? y apple is nt working on dis problem wen users are facing problems with new os x .....

Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.?? y apple is nt working on dis problem wen users are facing problems with new os x .....

I suggest you contact Adobe tech support or their Mac forums for assistance.

Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple

Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple iTunes programs but uninstall them in right order and then do restart of computer then reinstall newest iTunes and it will all be fixed up syncing problems or other problems this is thanks to Apple phone support

What is your technical support question for these user to user technical support forums?

When Apple solve problems with new iTunes calendar sync with windows and outlook?

When Apple solve problems with new iTunes calendar sync with windows and outlook?

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
More Info here...
Apple ID FAQs > http://support.apple.com/kb/HT5622
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Before I buy has there been any problems with new 27 iMacs?

Before I spend my hard earned cash does anyone know if there has been any problems with new 27 iMacs?

Hello richard from Folsom:
Are you inside or outside? ( I could not resist, I lived in Sactown).
Anyway, advice is frequently worth what you pay for it, and mine is free.
If you want it, buy it. The posts above are right on the mark (except waiting is probably overly-cautious). The best advice (from anamusic) is to buy the extended warranty - well worth the money.
Barry

I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.

I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.
At first I thought it might be because I was using simultaneously my old iPhone 4S so it somehow realized the emails where being pushed to another device and the it marked as read, this has nothing to do since I have deleted the email account from the iPhone 4S

Contact the email provider for assistance with their service.

Premiere Elements 13 , Problems with new text/titles

Premiere Elements 13, bisher keine Probleme. Nachdem die Filmlänge etwa 15 Minuten beträgt immer größere Probleme Titel/texte einzugeben. Wartezeiten sind extrem lange oder Programm stürzt ganz ab.

High ATR,
Computer running on Widows 7 ,64 Bit System, Service Pack 1, Processor AMD Phenom(tm) X4 945 3.00 Ghz;RAM 8 GB
Grafikkarte: NVIDIA GeForce 8800 GT
If the video on the timeline is longer than 10 minutes the problem will be remarkable. The response times adding a title is getting longer(2-15 seconds).
As the video is now 18 minutes the response time is after each action(resizing of letters or any changes of the text) up to 30 seconds or the program crashes completely.
Project settings are the following:
General HD 1080i; 29,97frames/second; Video:1920v 1080 H, 30 fps
Video: maximale Bittiefe, Dateiformat i-frame only mpeg, Kompressor MPRG i-Frame, Standbilder optimieren
The video is a mixture of full HD videos 1920x 1080 .mov and pictures up to 4608x3456 pixels.
When the program crashes I remarked that the main memory RAM(8Gb) was fully used by the premiere program. Might there be a problem?
Thank you for your service.
thomasd
Von: A.T. Romano
Gesendet: Sonntag, 1. Februar 2015 23:55
An: Thomas Deschler
Betreff: Premiere Elements 13 , Problems with new text/titles
Premiere Elements 13 , Problems with new text/titles
created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <https://forums.adobe.com/message/7151822#7151822>

Facebook problems with new macbook pro.

Facebook problems with new macbook pro. I can't publish photo albums to timeline. I can't share items onto timeline. Photos I'm tagged in don't appear on my timeline. Any help?

Yes! Been living in a hellish nightmare since Sept-Oct. Unlike you, however, Apple has been of no help. They say the iPad is unhackable, plist and crash reports are none of my business and who understands them anyway, their route tracing apps are probably not reliable. The best they could do was wipe the iPad clean. Lost photos they said would be in the cloud....
Almost immediately was back in somebody's VPN, their remote controller, video, audio, working. Got the purple buddy for the first time today. I have been invaded, my iPad no longer feels like my own, I have lost thanksgiving, Christmas, new year trying to track down the invaders, signed up for a Cisco course, set/reset passwords.
I don't know who else to contact... Or what next to do.
I've read similar frustration in other posts, scattered around the support communities. Yours is the only one that has worked toward a solution.
How did you get anyone at apple to look at your logs and acknowledge there is a problem?
Would be happy for a suggestion on how to proceed. Already been the apple store genius and tech on phone route.

Firefox 6.0.1 causes extreme problems with ATI Catalyst 10.x drivers on a Win7 x64 system. When I roll back to Firefox 6.0, no problems. Can this be resolved?

Firefox 6.0.1 causes extreme problems with ATI Catalyst 10.x drivers on a Win7 x64 system. Took me quite awhile to identify, but when I roll back to Firefox 6.0, no problems. Once Firefox recognizes this and reinstalls the 6.0.1 update then severe display driver problems occur causing very erratic display behavior and ultimately rendering the system inoperative. The problem appears to occur within a minute or two after Firefox has been opened and it occurs even if Firefox has been subsequently closed prior to the actual event taking place. I have attempted this 6 times just to ensure that the problem was associated with the 6.0.1 update.

On Mac OS, plugins are installed to a common location, usually ''' /Library/Internet Plugins''' for system-wide availability or to '''~/Library/Internet Plugins''' for a specific user. Ref: http://kb.mozillazine.org/Issues_related_to_plugins#Background
Does Java 1.6.0_31 work on Safari or another browser?
I also found the following, in case it helps:
*http://reviews.cnet.com/8301-13727_7-57414869-263/how-to-use-java-applets-in-os-x-after-java-2012-003-update/
*http://stackoverflow.com/questions/6411909/how-to-downgrade-jre-jdk-on-mac-osx

Problems with new iMac and Adobe Creative Suite 2

Just wondering if anyone can help me out. I am a Graphic Design student and just bought Adobe Creative Suite2. I installed it on my new iMac, and it wouldn't open InDesign or Photoshop although I had no problems with Acrobat and Illustrator. A pop-up window stated that the program "unexpectedly quit". I have uninstalled and reinstalled three times and was on hold with Adobe Tech Support for three hours until I finally gave up. If anyone knows what's going on I would appreciate it!

I dragged the installer from the install disk to my desktop and was more successful in installing problem CS2 apps. Make sure to update everything as well. Some times it takes a restart to get the finickiness out of PS.

Problems with new catalyst

Similar Messages

Maybe you are looking for