Problems with Oracle Database 10g Express Edition and JBoss

Hi all,
I try to use Oracle Database 10g Express Edition and JBoss, but sometimes i have a connection problems.
Sometimes i have starnge warning:
WARN [JBossManagedConnectionPool] Unable to fill pool
org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (java.sql.SQLException: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
and:
org.jboss.util.NestedSQLException: Could not create connection; - nested throwable: (java.sql.SQLException: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
Oracle Database 10g Express Edition support Distributed Transaction Processing (DTP) XA interface or not?
Some ideas?
Thanks in advance!
Stoyan

Hi,
yes, it will work, but only with the Western European Edition, not the Unicode release.
See this thread for details:
Re: Connection error from SqlPlus 8.0 to Oracle XE in the same computer
Regards,
~Dietmar.

Similar Messages

Oracle Database 10g Express Edition and Forms 6i

Hello
Is it possible to combine those two in an application? I mean...can i make an application in Forms&Reports 6i with Oracle Database 10g Express Edition?
Sorry if that sounded silly but i didnt found a phrase on this subject on Oracle's forums
Thanks,
Oana

Hi,
yes, it will work, but only with the Western European Edition, not the Unicode release.
See this thread for details:
Re: Connection error from SqlPlus 8.0 to Oracle XE in the same computer
Regards,
~Dietmar.

Oracle Database 10g Express Edition and xmlelement

Hi
when i tried to execute the following Sql command on a Oracle Database 10g Express Edition
select level,xmlelement(evalname(desc), value1)
from hr.xml_local
connect by prior id = id - 1 start with level = 1
i got this error:
ORA-19039: The keyword EVALNAME is reserved for future use as a builtin function.
is there a workaround to avoid this?
MDK.

mdrake wrote:
Catch-22.. The other way of doing this easily is XQuery, but since in 10.2.0.1.0 XQuery had a dependancy on Java, and Java is not supported in XE we are back to square 1.
The only other ways are (a) string manipulation - which I refuse to discuss, or (b) DOM-APIOr Oracle Support providing the person with the relevant "alter session set events ..." statement to switch on that feature in 10.2.0.1 (as shown in the SQL and PL/SQL forum thread). Obviously as it's from Oracle support, it can't be supplied on the forums.
;)

Can't succesfully install Oracle Database 10g Express Edition on Ubuntu

Hi,
I've been trying to install Oracle Database 10g xe on Ubuntu 10.04 and when I execute the .deb package (oracle-xe-universal_10.2.0.1-1.0_i386.deb) I get a quick installation that doesn't ask me for any configuration settings. When the installation is finished I don't get any menu in my Applications menu named "Oracle Database 10g Express Edition" as specified in Getting Started Guide (I only get some items grouped into an category called "Other" (Backup Database, Get Started, Get Started With Oracle Database 10g Express Edition, Go To Online Forum, Read Documentation, Read Online Help, Register For Online Forum, Restore Database, Run SQL Command Line, Start Database and Stop Database). As a consequence I can't access the Oracle Database Home Page.
In addition when I click on Start Database I get the following message: "Operation failed. josep is not member of 'dba' group".
I've tried to re-download the packages and to configure it by editing /etc/init.d/oracle-xe but this doesn't solve my problem.
can you give me some help?
Thabk you in advance!

Markus Waldorf wrote:
Did you run the post-installation?
$ sudo /etc/init.d/oracle-xe configureYes I've done it but it doesn't seem to work...

Migration Oracle 9iR2 - Oracle Database 10g Express Edition, please, help

Good day!
Now I study examples from tutorial book "Oracle 9iR2 Data Warehousing"
(translated to Russian) written by Lilian Hobbs, Susan Hilson, Shilpa Lawande. However my Oracle is "Oracle Database 10g Express Edition" and ( as I thought ) for this reason I can't perform these examples.
Please, help me, if it no hard.
First example founded on using "Oracle Database Configuration Assistant"
and "Oracle Enterprise Manager Console". However, I not found them at
"Oracle Database 10g Express Edition".
Now I use only "Oracle Application Express" ( and SQL ). Please, tell me,
if "Application Express" has enough functionality with comparision to
"Oracle Database Configuration Assistant" and "Oracle Enterprise Manager Console"
and how I need to do ? (It must, because 10 > 9)
Second example founded on using SQL. First 80% SQL-commanfs of this executed succesfully. But command "CREATE TABLE easydw.purchases" has error message
"PARTITIONing is not available." Really, in "2 Day Developer Guide"
(SQL Reserved Words ) PARTITION is not exist.
Can I CREATE TABLE easydw.purchases by "Oracle Database 10g Express Edition"
(with PARTITIONing by other means of SQL )?
There is full text of this SQL-Command:
CREATE TABLE easydw.purchases
(product_id varchar2(8)
constraint not_null_product_id NOT NULL
constraint fk_product_id
REFERENCES product(product_id),
time_key date
constraint not_null_time NOT NULL
constraint fk_time
REFERENCES time(time_key),
customer_id varchar2(10)
constraint not_null_customer_id NOT NULL
constraint fk_customer_id
REFERENCES customer(customer_id),
purchase_date date,
purchase_time number(4,0),
purchase_price number(6,2),
shipping_charge number (5,2),
today_special_offer varchar2(1)
constraint special_offer
CHECK (today_special_offer IN ('Y','N')) )
PARTITION by RANGE (time_key )
partition purchases_jan2002
values less than (TO_DATE('01-02-2002', 'DD-MM-YYYY'))
pctfree 0 pctused 99
storage (initial 64k next 16k pctincrease 0)
tablespace purchases_jan2002,
partition purchases_feb2002
values less than (TO_DATE('01-03-2002', 'DD-MM-YYYY'))
pctfree 0 pctused 99
storage (initial 64k next 16k pctincrease 0)
tablespace purchases_feb2002,
partition purchases_mar2002
values less than (TO_DATE('01-04-2002', 'DD-MM-YYYY'))
pctfree 0 pctused 99
storage (initial 64k next 16k pctincrease 0)
tablespace purchasee_mar2002 );
Naturally, I also shall continue try find solution.
Winni.

Winni,
Partitioning is only available with Oracle Enterprise Edition.
Here is a list of features by edition:
http://www.oracle.com/database/product_editions.html
DBCA is not needed with Express edition because you can only have one XE database per server, and all options are pre-configured.
Enterprise Manager Console is not included with XE - only with the other editions.
You can get most of the functionality through SQL, Application Express and SQL Developer.

Problem upgrading Apex 2.1 to 3.2.1 in Oracle Database 10g Express Edition

G'Day Apex gurus,
I installed Oracle Database 10g Express edition in my Windows XP PC which comes with Apex 2.1 with no problems. Then I wanted to upgrade Apex 2.1 to 3.2.1 (Currently Apex download in OTN) following the document below:
http://www.oracle.com/technology/products/database/application_express/html/3.1_and_xe.html
I went to the steps:
@apexins SYSAUX SYSAUX TEMP /i/
Then to change the password for the admin account run apxchpwd.sql and when prompted enter a password for the ADMIN account.
@apxchpwd
with not problems
Then I connected to SQL*Plus as SYS by:
sqlplus /nolog
CONNECT SYS as SYSDBA
Enter password: xxxxxxxxxxx
but when I tried to run:
@APEX_HOME/apex/apxldimg.sql APEX_HOME
where APEX_HOME is Apex3.2.1 in my case
SQL> @Apex3.2.1/apex/apxldimg.sql Apex3.2.1 (I get the messages below)
PL/SQL procedure successfully completed.
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as 'Apex3.2.1/apex/images'
Directory created.
declare
*+
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the path specified.
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "SYS.XMLTYPE", line 287
ORA-06512: at line 15
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Commit complete.
timing for: Load Images
Elapsed: 00:00:00.17
Directory dropped.
Can anyone help me in how to trouble shout this?
I tried to continue by following the steps document
@APEX_HOME/apex/apxxepwd.sql password
(where password is the password of the Application Express internal ADMIN account)
but when I tried to login in:
http://localhost:8080/apex/f?p=4550:1
when I type the credentials
system
system
systempassword
nothing happens
or even If I try:
http://localhost:8080/apex/f?p=4550:10
admin
adminpassword
nothing happens here too.
I appreciate any help
Kind regards
Carlos

My database version is 10.2.0.1.0 Oracle express.
Operating system is Windows Vista.
I started installing using the following commands.
@ C:\temp\apex\apexins.sql
it prompts me for the values of sysaux sysaux temp and c:\temp\apex\images\
If I supply the value for images the sqlplus window closes after scrolling a lot of info.
Enroute it also prompts me for a value for 9:
I don't know what the input shall be.
Then it again stops at enter value for version:
I used 3.2.1.0
The window scrols a while and closes.
later I changed the password and ran the command.
@c:\temp\apex\apxldimg.sql c:\temp
but no success with installation.
the output is as following.
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Nov 27 18:13:43 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect system/sairam as sysdba;
Connected.
SQL> @ c:\temp\apex\apxchpwd
Enter a value below for the password for the Application Express ADMIN user.
Enter a password for the ADMIN user []
Session altered.
...changing password for ADMIN
wwv_flow_security.g_security_group_id := 10;
ERROR at line 3:
ORA-06550: line 3, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_SECURITY_GROUP_ID' must be declared
ORA-06550: line 3, column 5:
PL/SQL: Statement ignored
ORA-06550: line 4, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_USER' must be declared
ORA-06550: line 4, column 5:
PL/SQL: Statement ignored
ORA-06550: line 5, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 5, column 5:
PL/SQL: Statement ignored
ORA-06550: line 8, column 23:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 7, column 15:
PL/SQL: SQL Statement ignored
ORA-06550: line 13, column 32:
PLS-00364: loop index variable 'C1' use is invalid
ORA-06550: line 12, column 9:
PL/SQL: Statement ignored
ORA-06550: line 19, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 19, column 5:
PL/SQL: Statement ignored
Commit complete.
SQL> @c:\temp\apex\apxldimg.sql c:\temp
PL/SQL procedure successfully completed.
Directory created.
if wwv_flow_utilities.db_version_is_at_least('11') then
ERROR at line 32:
ORA-06550: line 32, column 25:
PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
ORA-06550: line 32, column 3:
PL/SQL: Statement ignored
PL/SQL procedure successfully completed.
if wwv_flow_utilities.db_version_is_at_least('11') then --11g only
ERROR at line 16:
ORA-06550: line 16, column 25:
PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
ORA-06550: line 16, column 3:
PL/SQL: Statement ignored
Commit complete.
timing for: Load Images
Elapsed: 00:00:00.32
Directory dropped.
SQL>
Does this require XE 11 or anything else.
This will happen even if I supply as following(closing of sqlplus in the begining).
@ C:\temp\apex\apexins.sql sysaux sysaux temp c:\temp\apex\images\
Any help.

I have Installed Oracle Database 10g Express Edition so i have Problem.....

Hello Friends
I have Installed Oracle Database 10g Express Edition in "Ubuntu Linux" but i have Following Problems:
1.) After i installed Oracle Database 10g Express Edition i gone to
"Application" -> "Oracle Database 10g Express Edition" -> "Run SQL Command Line"
SQL Window has been opened there i have typed "SELECT * FROM tab;" here i got Warning Messg of
"SP2-0640: Not connected"
2.) From There i have Again gone to
"Application" -> "Oracle Database 10g Express Edition" -> "Start Database"
i got Warning Messg of "Operation Failed. venu is not a Member of DBA Group"
3.) Finally i want Solution For "How to get Connected in "Oracle Database 10g Express Edition"
Please Post the Answer As Soon As Possible ...
From Venu(INDIA)

Was the oracle-xe configure completed successfully?
Are the pmon and listener processes running ... set your environment and connect via sqlplus if so. If no processes, the instance needs a startup.
$ ps -ef |egrep pmon
oracle ... ora_pmon_XE
$ ps -ef |egrep lsnr # can also check the listener status, see below
oracle ... /usr/.../tnslsnr ...
$ lsnrctl status
Endpoints Summary ...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<your hostname>)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=http) ... (PORT=8080)))
...In the ORACLE_HOME/bin directory there is a shell script you can source to set up your environment variables for connecting to the database. The full path to the .sh should be revealed by the tnslsnr process, /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh
$ /usr/.../oracle_env.sh
$ sqlplus /nolog
SQL> connect system
Password: ...
Connected.
SQL> select status from v$instance;
STATUS
OPENThe oracle user created by the configure won't have a known password set. Set it and switch user to the oracle login. If you don't want to muck about with the oracle user, at least add your user to the dba group so that you can connect with the sysdba privilege when needed.
Edited by: clcarter on Feb 22, 2011 7:06 AM

Can Oracle Database 10g and Oracle Database 10g Express Edition co-exist ?

I just installed Oracle Database 10g Express Edition. But I also want to access isql*plus for study purposes.
Can I download/install Oracle Database 10g without removing Oracle Database 10g Express Edition ?

I decided to download and install Oracle 10g myself and it was pretty quick to install. So I answered my own question : Oracle 10g Express is definitely able to co-exist with Oracle 10g no problem.
I want to post/share this answer for others who started with Oracle 10g express first - the journey I started.
The url isql*plus is displayed near the end of the installation together with the enterprise manager url. Pretty cool.
Now I can learn both Oracle 10g enterprise edition and Oracle 10g Express which is based on apex engine.

Download problems Oracle Database 10g Express Edition

Completed download.
Attempted to start application but cannot find the server.
Removed the software using add/remove programs.
Attempted to reinstall but it seems that some applications are still on my system.
Attempted to remove the application but the add/remove program does not recognized the application
What can I do.

Hello,
I need to install "Oracle database 10g Express Edition" with different database name example dev but it is taking
default name that is XE and there is no option come during installation where i can put the name of database as per my desire.First, note that you can't install more than one instance of XE per server. Changing the instance name won't help you with that.
As you've already found out, the installer always creates a database instance with default names. That's part of the "Express" concept: As little configuration as necessary to get a Oracle Database installed with just a few clicks. The second advantage is, that you can also simplify the documentation, as you can forget about several aspects when you don't have to configure them...
Since you don't have tools like dbca in XE, your only option would be to rename the database once it's created. There are a few threads on that topic in this forum, e. g. {thread:id=403056}.
But before you start working on that, could you explain why exactly you have to use a different database/instance name?
And also explain why we use "Oracle database 10g Express Edition" instead of Oracle database 10g. what is the meaning of Express Edition.Why and how should we answer why you picked a certain edition? The most likely cause is license costs: XE is available for free, all others are just free as long as you use the OTN license...
For an overview, there is a [url http://www.oracle.com/us/products/database/enterprise-edition/comparisons/index.html]Comparison Matrix for Oracle Database Editions.
I'd furthermore ask why you still use 10g XE instead of the current 11g XE?
-Udo

Oracle Database 10g Express Edition with openSUSE 10.3 ?

The install guide for Oracle Database 10g Express Edition say it requires Suse SLES-9 .
Does any know if Express Edition can be installed on openSUSE 10.3 ?
Thanks in advance.

Likewise. No issues at all.
You might want to web-search for Novell's orarun package. Not required if you read the install manual and understand Linux, but it helps prep the environment by eliminating some of the guess work.

Oracle database 10g express edition-database home page problem.

I've installed Oracle database 10g express edition.
When I try to launch to the database home page,a login pops up saying "connecting to 127.0.0.1" expecting an user and password.
I tried my system and sys login,but both were unsuccessful.
Could someone help me please.?
Thanks,
Bhagat

Feel free to join us in the XE forum at Oracle Database Express Edition (XE)
If you're not registered there, do so using http://www.oracle.com/technology/xe/registration
Also feel free to use the documentation at http://www.oracle.com/pls/xe102/homepage, specifically the "Getting Started Guide"
You need to log in using SYSTEM and the password you supplied during install.

Oracle Database 10g Express Edition Beta 2 Installation

Oracle Database 10g Express Edition Beta 2 Release for Microsoft Windows installation successful, no problems.

Hi Rekha,
The format mask 999G999G999G999G990D0000 is the format mask that I selected from the software itself. I also use this format mask for a single record update. If' s ok, no error, but with tabular form with multiple record update, it shows error .I also changed the decimal point to two digits ,select from software pop-up window (this was tested in the workspace provide by Oracle). It still shows error. Last test I put the space like 1 111,111.00 in a single record update it shows error (but if I put 1 in front of 111,111 without space it's ok-no space before). My point is from user point of view.In the first time user input 100000 the software accept it. Opp! it has to be 1100000. The user comes back after submit and put 1 without comma.It shows error (in tabular form with multiple record update not in single row update). While in the first time the user do not to key any comma at all. This may makes some confuses both the users and the developers which had to check error by adding program to checking some where in Page Processing or Page Rendering.
Thanks
Tritep

Oracle Database 10g Express Edition & linux Fedora

Hi guys
How are you doing?
I want to ask about my problem which is I can't access to the home page of Oracle Database 10g Express Edition when I press on "Go To Database Home Page" it's open firefox but does not do any thing by the way I try to write the web page http://127.0.0.1:8080/apex on the address bar but firefox give me an error which is "Unable to connect"
So please when you know the solution post it here step by step "I'm beginner linux user" .
My distribution is Fedora 14
..Thanks a lot
Saleh

Was the configure step completed successfully?i.e., did you run
/etc/init.d/oracle-xe configure after you installed the rpm? This is similar in XE 10g and 11g beta. You can run this again to reenter your configuration parameters, especially concerning HTTP port, and make sure they have the expected values that way.
Despite that, you could try to (re)start the service, and see if it comes up without errors.
/etc/init.d/oracle-xe stop
/etc/init.d/oracle-xe startIf everything doesn't look too bad, you could have a port conflict with another service using port 8080. In that case, you could reconfigure XE to have its HTTP server listening to a different port.
-Udo

Dowload oracle Database 10g Expression Edition

Hi im Keli
i tried many times to dowload the oracle Database 10g Expression Edition for linux but i couldn't
can someone give the the way to do it properly ?
thank for your help

What steps have you taken? (include links, responses and errors)
What connectivity do you have? (indicate modem, DSL/Cable, reliable link, link speed, perhaps even country of origin would be useful)
I regularily download and install new copies. Almost always with some form of high speed connection and I never had a problem. Therefore I conclude there is a concern about your connection or your process.
Answering the above questions in detail would be useful. (Missing detail is somewhat like saying "I can not start my car. What is wrong?")

Oracle Database 10g Express Edition (Oracle Database XE)/ BI Publisher

Hi,
I have installed Oracle Database 10g Express Edition (Oracle Database XE) on my windows machine and would like to work with BI publisher for reporting in APEX applications.
Question: Can I install and work with BI publisher on ORACLE DATABASE XE?
If not any other options available?
Appreciate any help.
Thanks,
Lakshmi

hi,
yes you can install.. try
Oracle Discoverer 10g (Oracle BI Suite Standard Edition)
regards,
Deepak

Problems with Oracle Database 10g Express Edition and JBoss

Similar Messages

Maybe you are looking for