Problems with Preview and Digital Camera
Hi All,
I bought a Konica Minolta DImageX1 camera and the first few pics I took and downloaded them onto my ibook ans view them on Preview everything was alright. However, everytime I now transfer pictures to my laptop and when I view them with Preview it displays the following message:
"Preview cannot display the image properly. The file may be corrupt. Reason: Can't cache file". After this the image is loaded anyway.
But when I transfer the pictures to my Windows PC and I view them there, I get no warning message. And I downloaded an Image Viewer freeware from Versiontracker.com and it gave no warning message as well.
Any suggestions as to what could cause this problem with Preview?
Thank you in advance,
Eder
ibook g4 1.2 GHz Mac OS X (10.3.9)
Hi Eder,
I have exactly the same problem with you.
But what I am using is DiMAGE Z6.
What I am concern is that if this affect the image quality.
Anyone who know how to solve this, please advice.
Thanks and good day!
Similar Messages
-
Problem with Preview and PSD files - random gray square
Hi guys, hope you can help...
I've got a problem with Preview and PSD files.
If I open in Preview both an original jpg straight from my reflex and the photoshop version of the same picture, the psd file presents a gray square (of what it seems unrendered image) in a random area of the photo (sometimes in the center.). The square is quite big...
If I zoom in or zoom out it disappears...if I scroll to another photo and then back to the psd, the square it's there again...sometimes in a different position.
I've tried the same psd on my older iMac with leopard...and got no problem at all.
I suspect it got something to do with my Ati...
(this is the second iMac 27...the first went back for gray banding on the lcd screen and flickering and yellow tinge........)
Thanks for your help.
DAve.maybe I'm onto something...
I've just found out that opening Preview in 32bit mode (instead of default 64bit) works flawlessly with any psd files. If I switch back to 64bit mode, Preview is much faster but the gray square comes back...
It seems like the i7 is much faster than the Ati....
Any more realistic ideas? -
Problem with preview and pre-render
hello Ladies and Gentlemen
my problem is after i do any work(write, add, change) the preview is run automatic and after the pre-render come and ask my if i'll save the video
evry day
can you help my for my problem
sorry for any mistake in ortographeCan you provide some info about your system? Graphics card? Screeen resolution? Operating system? What input device (mouse or tablet)? This error has cropped up elsewhere recently, but since the person asking did not provide any details, we were unable to resolve it. If you are having difficulty posting in English, feel free to use your native language. We have English, French,Spanish, German, Russian and even a bit of Japanese covered by people here, so someone might be able to even answer in that language, provided a solution is available.
Mylenium -
Problems with headset and front camera
Hi, I get two problems about my Lumia 920 and my phone is still in warranty. Im just wondering whether these two issues are included in the warranty?
1. The left one of my headset suddenly goes wrong today, it cant give any sound now. Can it be fixed?
2. There are too much dust gets into the front camera, which has blurred the picture taken by it. Is there any possible way to clean it?
ThanksBoth should be covered under Warranty
Refer this for more details and the respective validity period ..
BTW, for the Headset issue, first check whether you are inserting the pin properly till the end. You may try a slight rotating actin or pull / push a few times and see. Also check whether there is any dirt within the post on the device that you can clean without damaging any terminals inside .. -
Problem with PREVIEW and photoshop JPG's
hi ...
just trying out the new version of Adobe's CS6 Photoshop;
exported a dozen files as JPG's for an album, but my app,
"JAlbum", which I normally use for HTML albums rendered
them as totally black, and when I try to open them in PREVIEW,
(they look normal when they open), and RE-SAVE them,
PREVIEW will not allow the save, and the estimated file
size on the "save as" is ZERO KB.
would anyone have a clue of what is going on?
thanks!Check the rights where you're trying to save them, or change the Save location for a test.
-
Problems with Preview and HTML
Hey people,
im relatively new to using dreamweaver and currently doing a
wesite for a friend. i did the layout in photoshop and sliced it
into tables and cells in dreamweaver and set each sliced image as
each of their bg images.
can anyone tell me why...
THIS
THIS
when previewed in dreamweaver looks like...
THIS
and when opening the saved html file as itself it looks
like...
THIS?
i have no idea why and am afraid to give my friend the html
files without knowing it won't look like that for him.
the images are located in a /images file.> all images are linked via a images folder as
/images/picture.jpeg
Actually not.
What you describe is a root relative link - that means that
all links begin
their path at the root of the site.
That's what you have here -
background-image: url(/images/grey.jpg);
But it's not what you have here -
background="middle.jpg"
Enable temp files in PREFERENCES | Preview in Browser, and
you'll see those
images in preview (after you fix the link I show above).
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Everlong-Drummer" <[email protected]> wrote
in message
news:[email protected]...
> all images are linked via a images folder as
/images/picture.jpeg
>
> heres the code
>
>
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <title>Untitled Document</title>
> <style type="text/css">
> <!--
> body {
> margin-left: 0px;
> margin-top: 0px;
> margin-right: 0px;
> margin-bottom: 0px;
> background-image: url(/images/grey.jpg);
> }
> .style1 {
> font-family: Verdana, Arial, Helvetica, sans-serif;
> font-size: 10px;
> }
> .style2 {font-family: Verdana, Arial, Helvetica,
sans-serif}
> body,td,th {
> font-family: Verdana, Arial, Helvetica, sans-serif;
> font-size: 12px;
> }
> -->
> </style></head>
>
> <body>
> <div align="center">
> <table width="800" height="689" border="0"
align="center"
> cellpadding="0"
> cellspacing="0">
> <tr background="/header.jpg">
> <td width="800" height="198" colspan="2"
valign="top"><div
> align="center"></div></td>
> </tr>
> <tr>
> <td width="234" height="198" valign="top"
> background="middle.jpg"> </td>
> <td width="566" height="198" valign="top"><img
src="/links.jpg"
> width="566" height="198" /></td>
> </tr>
> <tr background="/body2.jpg">
> <td height="217" colspan="2" valign="top"><div
align="center">
> <table width="800" border="0" align="center"
cellpadding="0"
> cellspacing="0">
> <tr>
> <td width="86" height="217"><div
align="center"></div></td>
> <td width="148"
valign="top"><p> </p>
> <p> </p>
> <p> </p>
> <p> </p>
> <p> </p>
> </td>
> <td width="479" align="left"
valign="top"><p>Welcome to our
> website.</p>
> <p>Put stuff here </p>
> <p> </p>
> <p> </p>
> <p> </p>
> <p>-Regards </p></td>
> <td width="87"> </td>
> </tr>
> </table>
> </div></td>
> </tr>
> <tr background="/bottom2.jpg">
> <td height="55" colspan="2" valign="top"><div
> align="center"></div></td>
> </tr>
> <tr>
> <td height="21" colspan="2" valign="top"><div
align="center"
> class="style1"> Copyright 2006 Etc
</div></td>
> </tr>
> </table>
> </div>
> </body>
> </html>
> -
Problems with Preview and changes made to images
i occasionally use Preview.app (v3.0.9) to rotate or crop image files (jpegs in this instance). if I then close the image, save changes and re-open, the image is changed. however, the icon doesn't update to the new orientation/crop and if I drag-and-drop the image into Mail.app or Photoshop.app (i'm using a very old Elements 2.0) I get the original image without the changes.
is this a fault or am I just not understanding the way it's supposed to function? surely there's a way to crop/rotate images on a Mac without 3rd party software like Photoshop?
(i'm not talking about images i want to retain in iPhoto either, i'm a business user and don't use iPhoto for work )Here's several freeware graphics apps that you might want to try.
Seashore @ http://seashore.sourceforge.net/
ImageJ @ http://rsb.info.nih.gov/ij/
Goldberg @ http://mac.softpedia.com/get/Graphics/Goldberg.shtml
Gimp @ http://www.gimp.org/macintosh/
Cheers, Tom -
Problem with Facetime and my MacBookPro camera
Hello,
I've got a MacBookPro and I have a problem with Facetime and my front camera.
When I have a discussion with an iMac or an other MacBook the image received by the other person becomes fix.
To unfix it I have to put my finger on my camera and then everything is good until the next time, 4 to 10 seconds later I've got the problem again.
Perhaps somebody can help me.
My head on my screen is always good even when the bug appear on my correspondent's screen.
For information, the 2 mac have the same iOS version (OSX Lion) and Facetime version.Hi Dave,
Edit: Well, I guess I was lost when I posted this. My answer was regarding a problem with OS X, not iOS. I'm going to leave the answer here in case someone else with a Facetime for Mac issue can benefit, because when you're searching for "Facetime AND Login", you could land in any discussion area. -Jerry
Keychain Access.app is in your Utilities folder in your Applications folder.
The path will be: Macintosh HD > Applications > Utilities > Keychain Access.app.
Keychain is where all your passwords are stored for those applications that you don't want to have to manually log into all the time.
It's a handy app to become familiar with, for instance if you want to look up a password or user name from the past.
Hope this helps you.
Jerry -
Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
I have an AE1 and dare my lenses comparable with the new digital cameras?
I have an AE-1 regular camera with lots of lenses and are they compatible with the new digital camera bodies?
Welcome rrodamer!
Your questions has been asked before, and answered:
http://forums.usa.canon.com/t5/Lenses/can-I-use-my-lenses-from-AE1-in-the-EOS-cameras/m-p/3841/
http://forums.usa.canon.com/t5/Lenses/Is-there-an-adapter-which-will-allow-me-to-use-my-old-AE-1/
Hope that helps. -
Problem with installing and running some applications or drivers
When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there. -
Problem with ADS and LDAP
I have installed Win2000 + sp1 and ADS on a computer. This computer is PDC.
After connection via LDAP I cann't get any object ( users or goups etc. ).
I try connect to ADS by java ( JNDI ).
When I use another clients of LDAP ( eg. Maxware Directory Explorer) I have
the same problem - no objects.
Can anybody help me?
Grzegorz Pszona
my e-mail: [email protected]Thanks a lot.
Softerra's browser is really good.
Thanks
Rashmi
"Anant Kadiyala" <[email protected]> wrote:
>
I used Softerra's LDAP browser. The browser is free. There is also a
java baded
LDAP browser from Univ of Michigan. I found the Softerra browser to be
more easier
to use.
-anant
"rashmi" <[email protected]> wrote:
Hi,
Can you please let me know which exact ADS tool that you used to examine
the
DN. I have Active Directory Users and Computers, Sites and Servicesand
Domain
and Trusts installed on my machine but I am not able to figure out how
to get
the DN?
Thanks
Rashmi
for Stephen Davies <[email protected]> wrote:
Grzegorz,
I have had WLS6.1 & ADS working ok using LDAP V2. Mind you it did take
a
fair bit of messing around to get it going. MS does have a few oddities,
for example the Administrators DN might look something like this:
cn=Administrator,cn=Users,dc=eglobal,dc=net
One tool that I found invaluable came with the additional support tools
for Windows 2000. The 'Active Directory Administration Tool' made it
easy to list the directory contents and examine the DNs.
Regards,
Steve
Stephen Davies
Principal Consultant
eGlobal Services Pty. Ltd.
Sydney, Australia
Ph. +61 2 9283 1033
http://www.eglobal.net/ -
Problem with vista and 5.1
problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions. -
Problem with preview PDF files on Windows 7 32bit
Hello,
in my office I have a problem with preview PDF files on my computers. The files are allright, but if I select a file and click on preview mode after ~ 10sec operation system write something "Preview this file is corrupt for PDF Preview Handler wrong". On other 64bit computers with same programs the preview is work. I try uninstall all Adobe soft (Reader, Flash), clean all Adobe data from folders in root and in register, but it is not solve this problem. On Microsoft forums wrote me, that the problem is probably with AR plugin.
So, can someone help me?
Config PC:
Windows 7 32/64bit Pro
Intel i3, 4GB
Adobe Reader 11.0.5
Adobe Flash Player 15 ActiveX
Adobe Flash Player 15 plugin
Preview Handler Surrogate Host ver.: 6.1.7601.17514
Thank you for help.I think I figured it out after reading other forums. Thanks!
-
Hello,
I have a problem with comma and point in a double-digit.
I use a english driver for HM8142. When I get the values then I only get
int-digits. How can I change "Use comma as separator" . I tried to change
the option in LabVIEW.
I changed it, then I got the window. "To change, restart the programm". I
have done this. But when I have a look at the option, it is not changed.
What can I do?
I am not the admin on the computer.
MartinHi Martin,
you do not have to change any system settings neither in LabVIEW nor in your windows.
All instrument drivers should use a point as decimal separator. You can overwrite the decimal point handling in the string functions "Scan from string" and "Format into string".
Make a right click on the function and use "Edit Scan String". In the dialog open the ring under "Selected operation", the last entry allows you to set the character for the decimal separator. This separator will be used for all the following floating point numbers.
From your name and problem I think you are located in central europe. I do not have a german version of LV so I cannot tell you how the elements are named in german.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions
Maybe you are looking for
-
Horrible iTunes Video Problems
This is getting ridiculous. When iTunes tried to download a video podcast, it keeps coming up with that message about it now being compatible! Those exact files were working before I had to partion and copy my library verbatim from my backup copy. Wh
-
i get a pop-up window saying the current version of Safari does not support the community toolbar. How do I get rid of this?
-
Firefox won't start after downloading update. I've reinstalled Firefox, still won't start. Help says check virtualization settings. What and where are virtualization settings? I have Windows XP.
-
Scripting play all end jump problems.
hi all in my project i have a script that plays all of my tracks following the 'scripting a dynamic play all button in dvd studio 3' help sheet i found on this discussion forum. for it to work i need to set the end jump of the tracks to a 'play next
-
What's the best BT mouse out there for my powerbook?
HI. I need a bluetooth mouse for my wife to use in photoshop. She is using a 17 inch powerbook. The mighty mouse gets bad reviews, so I'm not interested in it and she's not really interested in a tablet/mouse combo. If anyone has some suggestions, pl