Problems with restore/upgrade

HI,
In the middle up updating my ipad, my computer turned itself off (thats another story!). My ipad is now saying it needs to be restored, but in itunes it has bee showing preparing ipad for restore for the last 4 hours. Is this right ? Should it show for this long ? Getting rather concerned that I had done something very major - please help !

No, that isn't right. It shouldn't take that long. I'm guessing you are going to need to use recovery mode now in order to restore the software. I would try stopping this "preparing" stage that the iPad is in. Try clicking on the X in the progress bar at the top of the iTunes window. Then start over again.
Take a look at this.
iOS: Unable to update or restore - Support - Apple

Similar Messages

Has anyone been experiencing problems with "Restore Purchases" after upgrading to iOS 7?

I've been having problems with restoring purchases on a majority of apps that I have previously downloaded and purchased IAPs. I've only successfully restored purchases on one app (Warhammer Quest); but other apps, such as "Legendary Heroes" (On which I spent $20 to unlock everything), no longer restore my purchases. Instead the "Restore Purchases" button prompts me to buy one "Remove ads" purchase. Some apps, such as Trinity Interactive's Tiny Legend Monster Crashers and Call of Mini Zombies do not have a "Restore Purchases" button at all. Has anyone else been having this problem? And even so, is this an issue with iOS 7 or just an incompatibility between the apps themselves and iOS 7? I've put way too much money into a bunch of these apps to have to repurchase everything all over again.

I would recommend using the SEARCH function of the forums and locating the many others posts that have already discussed this issue.

Problems with auto upgrade Anyconnect 3.1

Hello,
I'm having problem with auto upgrade of Anyconnect 2.5 to 3.1.
Here is the situation :
I have ASA5510 running ASA 8.4.5 and clients are running Anyconnect 2.5.3055 and 3.1.00495 with 2 different profiles.
Clients with 2.5 can upgrade to 3.1 but then receive an "Invalid host entry" when they try to connect with new client. It works if they use FQDN instead of profiles. It's the same situation with Windows 7, Mac OS X and linux.
If I configure client software back to 2.5 on ASA, it works again for every client.
Do you have an idea ?
Thanks for your reply.
Yann

I have seen the same behavior on Mac OS X. A couple of points for me:
If I delete the profiles from /opt/cisco/anyconnect/profile then I can connect once (using the FQDN) but it then downloads the client profile and on next attempted connection it receives "invalid host entry." My profiles use the FQDN of my ASA and both forward and reverse DNS resolution are configured properly.
My workaround is to remove the AnyConnect Client Profile entirely, but I can get away with that because I have a very simple setup, with all users in one default group. If I had to pass different profile information to different users that would not be a solution.
Second, better workaround: I just exported the client profile, imported it under a different name, edited the new client profile to remove the server address, and assigned the new profile to the group policy. At their next login, users get all the profile settings and since the client remembers the FQDN they used to connect it doesn't adversely affect the user experience.

Problem with restoring database from backupset

Hello,
I'm newie in working with RMAN and I have problem with restoring database from backup set in my testcase.
I've restored controlfile, but I couldn't restore database - it fails with:
RMAN-00571: =============================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS
RMAN-00571: =============================================
RMAN-03002: failure of restore command at 08/31/2006 12:06:47
ORA-01180: can not create datafile 1
ORA-01110: data file 1: 'C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF'
List of backupsets from restored controlfile
(I restored controlfile by command: restore controlfile from 'C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP'; -- I have disabled controlfile autobackup, therefore I couldn't restore from autobackup);
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
36 Full 6.98M DISK 00:00:02 29-AUG-06
BP Key: 36 Status: AVAILABLE Compressed: NO Tag: 01_CTL
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
Control File Included: Ckp SCN: 578469 Ckp time: 29-AUG-06
BS Key Type LV Size Device Type Elapsed Time Completion Time
37 Full 322.96M DISK 00:00:27 29-AUG-06
BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
List of Datafiles in backup set 37
File LV Type Ckp SCN Ckp Time Name
1 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF
2 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\UNDOTBS01.DBF
3 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSAUX01.DBF
4 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\USERS01.DBF
BS Key Size Device Type Elapsed Time Completion Time
38 650.50K DISK 00:00:00 29-AUG-06
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113804
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
List of Archived Logs in backup set 38
Thrd Seq Low SCN Low Time Next SCN Next Time
1 32 577277 29-AUG-06 578529 29-AUG-06
BS Key Type LV Size Device Type Elapsed Time Completion Time
39 Full 7.02M DISK 00:00:00 29-AUG-06
BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
Control File Included: Ckp SCN: 578493 Ckp time: 29-AUG-06
SPFILE Included: Modification time: 28-AUG-06
I can successfully crosscheck backup sets (by command crosscheck backup), but I couldn't restore database.
Path C:\ORACLE\ORADATA\LOCA10G2\ exists and I have right privileges.
Output of command restore database validate:
RMAN> restore database validate;
     Starting restore at 31-AUG-06
     allocated channel: ORA_DISK_1
     channel ORA_DISK_1: sid=102 devtype=DISK
     data file 1 will be created automatically during restore operation
     data file 2 will be created automatically during restore operation
     data file 3 will be created automatically during restore operation
     data file 4 will be created automatically during restore operation
     restore not done; all files readonly, offline, or already restored
     Finished restore at 31-AUG-06
What's wrong?
Thanks
     Paul

Hi,
I think, that everything seems to be OK.
Commands which I use to validation of existence backup:
RMAN> crosscheck backup;
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=102 devtype=DISK
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP recid=36 stamp=599744172
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP recid=37 stamp=599744183
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP recid=38 stamp=599918805
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP recid=39 stamp=599918805
Crosschecked 4 objects
RMAN> list backup summary;
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
36 B F A DISK 29-AUG-06 1 1 NO 01_CTL
37 B F A DISK 29-AUG-06 1 1 NO TAG20060829T113622
38 B A A DISK 29-AUG-06 1 1 NO TAG20060829T113804
39 B F A DISK 29-AUG-06 1 1 NO TAG20060829T113622
RMAN> list backup;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
36 Full 6.98M DISK 00:00:02 29-AUG-06
BP Key: 36 Status: AVAILABLE Compressed: NO Tag: 01_CTL
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
Control File Included: Ckp SCN: 578469 Ckp time: 29-AUG-06
BS Key Type LV Size Device Type Elapsed Time Completion Time
37 Full 322.96M DISK 00:00:27 29-AUG-06
BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
List of Datafiles in backup set 37
File LV Type Ckp SCN Ckp Time Name
1 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF
2 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\UNDOTBS01.DBF
3 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSAUX01.DBF
4 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\USERS01.DBF
BS Key Size Device Type Elapsed Time Completion Time
38 650.50K DISK 00:00:00 29-AUG-06
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113804
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
List of Archived Logs in backup set 38
Thrd Seq Low SCN Low Time Next SCN Next Time
1 32 577277 29-AUG-06 578529 29-AUG-06
BS Key Type LV Size Device Type Elapsed Time Completion Time
39 Full 7.02M DISK 00:00:00 29-AUG-06
BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
Control File Included: Ckp SCN: 578493 Ckp time: 29-AUG-06
SPFILE Included: Modification time: 28-AUG-06
RMAN> restore database validate;
Starting restore at 04-SEP-06
using channel ORA_DISK_1
data file 1 will be created automatically during restore operation
data file 2 will be created automatically during restore operation
data file 3 will be created automatically during restore operation
data file 4 will be created automatically during restore operation
restore not done; all files readonly, offline, or already restored
Finished restore at 04-SEP-06
Is something wrong? After crosscheck backup set with system datafile is AVAILABLE.
If i tried to test existence of backup pieces on disk and permissisons - everything is OK too:
C:\>dir C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\
Volume in drive C has no label.
Volume Serial Number is E003-9FC6
Directory of C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29
29.08.2006 11:38 <DIR> .
29.08.2006 11:38 <DIR> ..
29.08.2006 11:38 666 624 O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
29.08.2006 11:36 7 340 032 O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
29.08.2006 11:37 7 372 800 O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
29.08.2006 11:36 338 657 280 O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
4 File(s) 354 036 736 bytes
2 Dir(s) 56 865 202 176 bytes free
C:\>copy C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\ C:\ORACLE\ORADATA\LOCA10G2\
C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
4 file(s) copied.
Thanks
Pavel

Problems with restoring my iphone

Hello, i have a problem with restoring my iphone 4 the error that came out is "unknown error occured" (-1)

Hardware failure, you'll take your phone to Apple.

I'm having problems with restoring my iphone 4. when i try to restore

i'm having problems with restoring my iphone 4. when i try to restore

unfortunately there are tons of people with this issue but Apple has not given any answers for us to fix this issue yet. I wish they would allocate more people to solving these problems when they roll out new versions of itunes along with new hardware.

I want to upgrade from Tiger to Snow Leopard on my 2008 MacPro. How do I avoid problems with the upgrade process?

I want to upgrade from Tiger to Snow Leopard on my 2008 MacPro. How do I avoid problems with the upgrade process?

#1 Do a complete bootable backup of your drive before upgrading. That way should anything happen you can revert back to the start and try again.
Make sure you meet Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
You might also want to make sure you don't have software issues with SL:
A Mac OS X 10.6 Snow Leopard Application Compatibility List - http://snowleopard.wikidot.com/

Problems with restoring idevices

I have found a solution to the problem with restoring Your Ipod touch and iphones on a Mac, When it stops restoring the device at the very end.
To fix this problem, boot using your OS disk and verify your disk and permissions and then repair them. Restart your computer and see if it fixes your problems.

Hardware failure, you'll take your phone to Apple.

I have problems with restore in Itunes with eror 1418 and i cant put the song in my shuffle ..

I have problems with restore in Itunes with eror 1418 and i cant put the song in my shuffle ..

http://support.apple.com/kb/TS1372

Problems with Mavericks upgrade?

Thinking about uprgrading to Mavericks, but have been coming across a lot of threads/reviews about people losing date and/or having real problems with the process. It's been a while since I've been here, and just wanted to ask for an opinion/advice. I'm using Snow Leopard 10.6.8. Should I stay away from it, or if I do, what advice/tips do you have for a smooth upgrade?
OR -- is it possible to get Mountian Lion Somewhere? I looked for it in the app store, but couldn't find it. I heard some negative reviews about Lion, so I just kept Snow Leopard, rather than take any chances with a new OS.

Mavericks is excellent on my MBP 8,2. Fast and flawless. Faster than Mountain Lion.
New features I like: iBooks, iCloud keychain, enhanced dictation.
A few things to consider:
Any new OS has some bugs and incompatibilities with old software and hardware. If you are uncomfortable with basic Mac troubleshooting, then perhaps waiting would be a better strategy. I didn't have any problems, with installation or after.
If you have any mission-critical software or peripherals, make sure they are compatible first. Check your apps for compatability here: RoaringApps - Application compatibility and feature support for OS X and iOS
Mavericks does not play well with some old/bad software and hardware:
Crapware: anything that purports to "clean", "monitor", "protect", or "accelerate" your mac. Unnecessary on Macs and often harmful. Examples: CleanMyMac and MacKeeper (the King of Crapware).
antivirus software. Unnecessary on Macs.
WD hard drives.
Before you install Mavericks:
backup your old system, either with Time Machine, or better yet, a bootable backup.
have enough RAM. The specs say 2GB, but 4 is probably a more realistic minimum.
uninstall Crapware, antivirus software, and any other junk you don't need.
repair your hard drive and permissions with Disk Utility
boot into safe mode, and then run the installer Mac OS X: What is Safe Boot, Safe Mode?
ML is available here: OS X Mountain Lion - Apple Store (U.S.)

Problems with Vista upgrade on Moduslink

'COA invalid', 'Irrecoverable Error', 'Alert not Implemented'... these are kind of messages I get from Moduslink. I'm not expecting to reply my emails since they are in neck-deep.
I love my A100 SAA9E, a very stable and powerful machine. I'm from London and have selected all the right options, but it would either come up with a random COA prob, or an error after my penultimate step.
What can I do? Help.
Shawn

I was unable to complete the Vista upgrade via the Moduslink on Toshiba's website http://wwww.toshiba-europe.com/vista-upgrade, even though I got to paying for the upgrade with my credit card. When my payment was being processed I got an 'unrecoverable error', so I went back to repeat the process and this time the site didn't recognize my COA on the bottom of the laptop.
I contacted Moduslink via the following Tel No. 00800 666 44 666 (UK) and spoke to one of their support staff (choose options 5 and then 8). There is a problem with their site excepting payments from credit or debit cards. The representative reset my COA, but it takes 48 hours for it to clear (so much from electronic data communications to servers). I have been told to retry the upgrade process again on Friday 16/02/2007, however, this time to pay either by wireless transfer from my bank or send a cheque.
Hopefully, this will help others who were frustrated with the Vista upgrade debacle. It would be more appropriate however, if the company concerned, Modulink, resolved the issue in the 1st place. Firstly by informing their customers that there was an issue, secondly on a work around to the problem and finally fixing the problem. Will commonsense ever prevail?
Ala (14/02/2007)
Message was edited by: Ala_Jackson

Problem with restoring my HDD from .dmg image

Hello,
I encountered a problem with boot camp which couln't make a new partition for windows, because it couldn't move some files. It was a problem of defragmentation which i found surprisingly hard to solve. I'm a new mac user, and i was unable to find any defragmentation utility. Even the boot camp ask me to make and image of HDD, reformat it, and then restore from image. It was quite easy when i was reading it but after all i end up with new instalation of MacOS X without access to my files stored on HDD image.
Here's what i did:
1. I made images of HDD and and partition. To make images smaller i previously copied all of my multimedia files to PC. Images were created as read only, not compressed. They were stored on PC
2. I have used disc utility after booting up from MacOS X CD, and made a new partition. It's name is the same as the one i made image from.
3. Now it's the point when i should restore my partition from image but i encountered some problems. I copied images to mac again and was trying to restore partition from it but disc utility said it doesn't have any checksums or something like that. I read that it was a problem of verifying image with disc utility (the first button on the upper left side called verify.) It have checked image and made checksums but i still was unable to restore partition from it.
Now, i know it might be silly to try restore HD from image on the same HD but shouldn't it shows some oder errors? After booting up from CD i can't connect to PC to browse it's resources and writing address (http://pcname/folder/partition.dmg) in source line in restore tab does not do anything.
Is the only solution to connect a firewire hard drive to my mac with images on it? Or it is a problem with my images (making image process didn't showed any errors with HDD image and partition image).
Moreover i cant access those images on my MBP cos it's says that there are no mountable file system. Does it means that this image is bad?
Please help, I'm running out of options as i don't have firewire HDD and i'm really annoyed cos things like defragmentation are so easy on Windows and i don't get it why it's must be so complicated on Mac
Sincerely
PS sorry for my english
Message was edited by: pazera

*It said that my image don't have scan information and it needs to be imagescanned.

Problem with restoring Nokia N8

Yesterday I backed up my messages, pictures and videos because I had a problem with Nokia Maps. I did a Hard Reset and returned to install and configure everything. When I restore my files from the backup are restored only photos and videos but not the messages. I need to restore the messages too.What happens?
Thanks for your time.
Marcos,
Argentina
Nokia N8-00 user

Having Anna I have Reset the phone (*#7370#), reinstalled Anna updates - everything went nicely. After this I restored from a previously saved Backup the Contacts, Documents, etc. - all without Applications and settings, but also Messages.
Unfortunately Messages has not been restored by Nokia Suite (ver.3.2.100)!!! - Not a single message.
I tryied with PC Suite (ver.7.1.62.1) - most of the messages coud be restored, some unfortunately not (here I used the same backup file done by Nokia Suite, I do not have another as I have not backuped with PC Suite).
With NBU Explorer I see all the messages in the Nokia Suite backup file as saved correctly. So I can export all messages with their corresponding folders to PC, with files extensions of *.VMG.
I could restore the messages by:
- Exporting them with NBU Explorer with their corresponding folders to PC, with files extensions of *.VMG.
- Having prepared the folders in My N8 Message box I imported them folder after folder into PC Suite (PC Suite - Messages - Import into an empty PC Suite message folder) - this means they are already on the N8 (PC Suite synchs to N8), just in an wrong folder (PC Suite does not correctly synch with N8)
- folder after folder I move the messages from the saved folder (uncorresct folder) to the corresponding folder.
So I managed!
BUT!
- Apparantly Nokia Suite does NOT do its job in restoring the backuped Messages
(appart from not being able to synchronise correctly as PC Suite with Outlook - Contacts and Calendar);

I could not see how to continue after upgrade to firefox 4. This has never been a problem with ast upgrades. I am finding Firefox to be very user unfriendly for non-tech people.

I am being told that my current version of firefox is no longer protected. When I tried to upgrade to firefox 4 some time ago, the menu bar(?) was gone--no bookmarks. I set my computer back to an earlier date to get my book marks back and have been afraid to attempt this upgrade again. Firefox also appears to have tried to do the upgrade automatically and says I have incompatible add-ons. I have never had problems with previous updates. I have read negative reviews of firefox 4 and am frankly afraid of it. I hate to leave firefox and am afraid of losing my book marks as well. I find the "Help" forums etc. here extremely difficult to navigate and they seem to be aimed at people who are more tech savy than many of us are.

#Firefox 3.5.19 which you are using is no longer supported and is not being updated for any issues, including security problems.
#The Menu Bar (File, Edit, View, History, Bookmarks, Tools, Help) was replaced in Firefox 4 by the "Firefox button" in the upper left corner
#*You can turn the Menu Bar back on by doing one of the following in Firefox 4:
#**click Firefox button, click Options, click Menu Bar to select it
#**HOLD down the ALT key while pressing the keyboard letters VTM
#**right-click on an empty space in the Navigation Toolbar, then click Menu Bar to select it.
#Some information about Firefox 4 changes:
#*https://www.mozilla.com/en-US/firefox/features/
#*there is a link "watch the video" under '''''Improved Interface''''' on the above page
#You can make Firefox 4 look more like prior versions: http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/
Your bookmarks should be safe during the upgrade; they are in a separate place on your hard drive. You should keep them backed-up in case of any problems with your system. See:
*https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information#w_backing-up-your-profile
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Problem with PRD upgrade from 4.6C to ECC 6.0

Hello,
I'm experiencing a problem with our live Productive system, and hoping for some ideas on how to resolve. First, we have successfully upgraded our DEV and QA environment, and are now upgrading PRD. I was successful in getting through the uptime SAPup of our downtime minimized upgrade. Note that I did not need to log into the Shadow instance at all, because all modifications will be transported from DEV during downtime.
However, I did want to log into the Shadow instance to take a look at it. I first had to start the instance in the SAP Management console, and then when I attempted to access via the SAPGUI, I recieved error "Internal TSKH error. Session terminated". Also, I noticed that as soon as I started up the Shadow instance, I am now getting "SYSTEM_CANT_CLEAR" short dumps every minute. Error says: Error when initializing the work area "SYST".
Since I don't need to log into the Shadow instance to complete the upgrade, I'm not sure if this is going to be an issue for me or not while I complete the upgrade.
Any assistance would be greatly appreciated.
Thank you,
Leeanna Travis

Hello,
I'm experiencing a problem with our live Productive system, and hoping for some ideas on how to resolve. First, we have successfully upgraded our DEV and QA environment, and are now upgrading PRD. I was successful in getting through the uptime SAPup of our downtime minimized upgrade. Note that I did not need to log into the Shadow instance at all, because all modifications will be transported from DEV during downtime.
However, I did want to log into the Shadow instance to take a look at it. I first had to start the instance in the SAP Management console, and then when I attempted to access via the SAPGUI, I recieved error "Internal TSKH error. Session terminated". Also, I noticed that as soon as I started up the Shadow instance, I am now getting "SYSTEM_CANT_CLEAR" short dumps every minute. Error says: Error when initializing the work area "SYST".
Since I don't need to log into the Shadow instance to complete the upgrade, I'm not sure if this is going to be an issue for me or not while I complete the upgrade.
Any assistance would be greatly appreciated.
Thank you,
Leeanna Travis

Problems with restore/upgrade

Similar Messages

Maybe you are looking for