Problems with share screen in lion

Hello
I have had problems with share screen since i have installed Lion. I can't share screen even inside the Lan, between Macs and between Mac and Iphone. It's like Lion would had some port block in any hidden place. Anyone knows something about it?

FINALLY! Got Screen Sharing to work! REPLACE ARDAgent (v3.5.1) with the older v3.4
Instructions by tchaga:
1. Download ARD 3.4 (http://support.apple.com/kb/DL1350 RemoteDesktopClient.dmg), mount it, look inside the package/Contents, copy the Archive.pax.gz to the desktop
2. Expand the Archive.pax.gz and navigate inside the resulting folder Archive to /System/Library/CoreServices/RemoteManagement
3. Navigate to the same folder at the root of your HD (i.e. HD/System/Library/CoreServices/RemoteManagement)
4. Copy ARDAgent from your HD/System/Library/CoreServices/RemoteManagement to the Desktop and then delete it from the HD/System/Library/CoreServices/RemoteManagement folder (you need admin password).
5. Copy ARDAgent from Archive/System/Library/CoreServices/RemoteManagement to HD/System/Library/CoreServices/RemoteManagement (you need admin password again).
6. Restart

Similar Messages

I have an IMac running the latest level of Lion. Since installing Lion and also being forced to replace the hard drive I have a problem with the screen intermittently go all white. Happens about 8 to 12 times a day. I am using Wild Blue as my ISP.

I am looking for anyone in the west Tennessee area using Wild Blue along with Apple IMac who is having a problem with their screen going complelely white every so often. Have had the maching into the Apple store in Memphis. They could not get it to fail. Help

TutorDaddy, if this Mac is still covered by the initial warranty or under AppleCare, take it in and have it looked at. As the old label used to say, there truly are "no user serviceable parts inside." Kernel panics very usually indicate failing hardware.
I have an older iBook G4 that started developing kernel panics and like you, despite reinstalling the OS from a freshly formatted volume, they kept continuing. I looked at the crash log and saw that in each instance of panic, the last bit of code to be accessed had something to do with AirPort. Knowing that the AirPort software was at then current levels, I surmised the problem to be a bad AirPort networking card which, on that particular model of the iBook, was a very small module attached directly to the logic board. Since the computer was out of AppleCare, I broke the machine down myself (I didn't realize that there could be so many barely visible screws in one machine) and removed the offending piece of hardware. My iBook lives but without WiFi, it now sits as a more or less desktop machine needing an ethernet connection to stay connected to a network.
I do not suggest you break into your iMac. First of all, I'm guessing one would need to be able to pull off the glass and have the necessary glue to reattach it, which is not really available to us consumers. If you're feeling adventurous enough to read the crash logs from each panic, you might be able to surmise the hardware component (or badly written application or library; it can happen) that's causing the panic. If it's a software issue, remove the offending software app and see if the panics return. If it's a hardware issue, it's best to let a competent service tech qualified on Apple hardware to handle it.
[edited to add:]
After browsing through related problems in the discussions, I saw this link to a third-party web site being handed out. Perhaps you'll find it useful: http://www.thexlab.com/faqs/kernelpanics.html
Message was edited by: Stephen Adams

Problem with shares on Windows 2003R2 server from a Windows 8.1 PC

I'm having problem with shares on Windows 2003R2 server from a Windows 8.1 PC. It times out when I try to copy a file from my PC to the server and I get an error message saying "There is a problem accessing network drive W:\. Make sure you are
connected to the network and try again."
I have no problem copying files from the server to the PC.
Any ideas?

Hi,
How about your problem now? Have you test other machine also installed Windows 8.1? Did they have this problem?
To diagnose this problem, firstly, please check Windows 2003R2 firewall settings, also can disable firewall temporarilly for test.
Secondly, try to use Network Monitor to capture network communication package for test.
Network Monitor:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Roger Lu
TechNet Community Support

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.

Problem with Variable screen in WAD

Hi ,
I have a problem with variable screen in WAD , in the varable seen it is displaying only Key , it is not giving any description , but in BEX is is displaying both Key and Description , can any only have an idea why is this happening . this is occuring only for one variable , rest are working fine .
Thanks,
Abraham

Hi Abraham,
thsi could be a problem from the specisic setting of the infocube. Please check the BEx Settings from the infocube. You can find them by the following steps:
- search for the infocube
- doubleclick on the infocube
- choose an specific infoobjekt
- right mousebutton and click "specific dataprovider settings"
- check if the right entries are set
Hope this will help.
André

Problem with sub-screen actions on Cancel button

Hi all,
I have a problem with sub-screen.
I created a subscreen (screen sequence in MM01/MM02/MM03). When users leave this screen, I call POPUP_TO_CONFIRM to ask if they want to save the data.
1) My goal is: when they choose Cancel, no actions are performed and users will see the current screen. However, I cannot use command: SET SCREEN 0 or LEAVE TO SCREEN 0 because the system gives an error message:
*SET SCREEN not allowed in subscreens*.
2) How can we determine when the user leaves the screen? which value of SY-UCOMM will be used to check this?
Thanks in advance.

for dis SET SCREEN is not required.
Consider d code given below as n eg:
CALL FUNCTION 'POPUP_TO_CONFIRM'
    EXPORTING
      titlebar              = 'SAVE'
      text_question         = 'SOME _QUS'
      text_button_1         = 'YES'
      text_button_2         = 'NO'
      default_button        = '2'
      display_cancel_button = ' '
    IMPORTING
      answer                = l_ans
    EXCEPTIONS
      text_not_found        = 1
      OTHERS                = 2.
IF sy-subrc <> 0.
    MESSAGE e066.
ENDIF.
IF l_ans EQ '1'.    " when yes is pressed
   MODIFY db.
   commit work.
   leave program.
ELSEIF l_ans EQ '2'. "when no is pressed
    leave program.
ELSE.     " when cancel is pressed
ENDIF.
In above module when Yes is pressed it saves data den leave prog.
As no action is specified for cancel button it will remain on that screen only from which popup is called, in this way ur problem can be solved.
Reward properly.

Problem with SAP Screen

Not sure if this is the correct forum.
Okies, a user of mine has a problem with her SAP screens. It seems that she can't view the full screen of CJ20N She has to drag the window bigger to be able to see the content. She uses this window in a split monitor view, i.e. some of the applications are displaying on the laptop window while other applications display on the monitor.
Details of her SAPGUI:
Release 640 Final
File version: 6404.4.16.1015
Build: 774474
Patch Level : 16
Do note that her primary monitor (notebook) is always set to 1280x800 and the secondary monitor is set to 1024x768. Anyone encounter this problem before?

Hi,
This is problem with windows screen resolution. Better to use, maximum supported window size and make sure to use same size for both the screens.
Regards,
Ganesh

Problem with matrix/screen in Qosmio F55-Q502

Hello
For a few weeks I have strange problem with matrix/screen in my laptop.
The matrix flickers very often - no matter if power cable is plugged or not.
The screen is full bright and suddenly it starts to blink - it is getting darker, than lighter, usually for few/dozen seconds. It does it when nobody touches it or when I work on it.
It very annoying and making eyes tired - it does it very quickly and there are few levels of screen brightness.
Moreover sometimes the screen turns off - You can see what is on desktop but the screen is very very dark (but not blank or completely switched off). It happens without any reason - sometimes just in the middle of working, sometime for example when I touch (not pull) the power cable between laptop and power supply.
Then, the only way to get back to normal brightness of screen id to close the lid just for half a second and open it
- matrix lights then normally, but can "turns off" moment later and I must do it once again - sometimes even few times..
After "action" with lid screens seems like nothing ever happen..
Does anyone have idea what is the cause of such behaviour or how to diagnose it in details?
Or maybe solve this problem?
Best regards
300m

Sounds like the Backlight or Inverter is failing or there is a loose connection.
Is the unit under warranty? Send it to an ASP for repair.
You should avoid repairing it yourself, the backlight is very high voltage!

X220:Graphics problem with full screen videos

I have got my X220 laptop last month. I am facing problem while playing youtube videos full sceen.
videos can be seen best with smaller window but there is major graphics problem with full screen.
Can someone help on this?
I am using Windows 7 Enterprise edition.
Thanks

what do you mean by major graphics problem, please elaborate.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Problem with Full Screen

Ok I am getting problems with full screen graphics on some computers.
I am writing an internet based RPG and this is really eating into my time...
Can any one explain why my graphics will not show some times (works others) with the exact same code running....
I am using a BufferStratagy with a frame.
Any help would be gladly apreashiated thank you in advance,
Phibred

Not a thread issue, no thread on this side of the program and yes there is a media tracker. However I have learned that my problem was that my screen does not like to flip to 800x600 for java applications for some reason thx any way.

With the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

with the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

We are users here. We cannot possibly know when a new update will be available.

Macbook Pro late 2013 - problem with login screen resolution

Hi,
I've got problem with login screen resolution, after upgrade to Yosemite. I use the 4rd resolution (last one) on my Mac Pro (late 2013), and after restart login screen is always on optimum mode... But it's only about the login screen.
Do you know how can I fix it? I would like to have the same resolution on every screen.
thx in advance

I Reformatted the CF card on the new computer   it works fine now on the new Mac Pro
Interesting point about the low power of the usb ports   I had to deal with all devices ejecting them selves when the mac pro was idle or slept Drobo needed a Firmware update and another drives needed me to change the sleep setting or the Mac Pro   to never and i also had to deploy a script to write to each device ever minute,   this kind of sold the problem with external Hard drives.   I wonder if the lowering power to a CF card   can eject it in a manor which would make the computer think it is corrupt.
I have looked at buying a power usb Hub    but seems only one or two of the ports are powered.
Seems to be a bit problem with the mac pro especially as everything has to be connected externally
Will assume the Firewire Connector does not work.

Hi guys, problem with grey screen and flashing question mark. on top of it while in utility, i'm unable to verify, verify disc permission or repair disc0 which is obviously my main hd. any ideas where to go from here? tried to reistall osx but no luck.

hi guys, problem with grey screen and flashing question mark. should be straight forward affair but on top of it while in disc utility, i'm unable to verify, verify disc permission, repair or even erase disc0 which is obviously my main hd. any ideas where to go from here? tried to reinstall osx but no luck, stucked when asked to chose location to install osx. would really apreciate any kind of help with this cause i'm quite new mac user. ty

If you don't have a backup, read this:
https://discussions.apple.com/docs/DOC-1689

Is there compatibility problem with updating OS-X Lion to new Mountain Lion?

is there compatibility problem with updating OS-X Lion to new Mountain Lion?

http://www.apple.com/osx/specs/

Problems with the screen imac version 10.6.8

I just had a problem with my screen. iMac was working ok, I woke up for 5-10 min and when back the desktop screen was blurred and brilliant, cannot see it clear enough. Don't know what the problem is and how to solve it. Thanks.

Reset the NVRAM/PRAM and Reset the SMC.

Problems with share screen in lion

Similar Messages

Maybe you are looking for