Problems with Sinn7 Audio USB Interface on Mountain Lion

Hi Guys.
I have problems with my USB Audio Interface Sinn7 Status 24/96 on Mountain Lion system.
When i istalled drivers, system doesn't detect the card. After the system reboot, when i pluck the card in to usb, system makes a kernel panic.
My hardware: MacBook Pro 15'' Late 2011 / OS X Mountain Lion / Audio Interface: Sinn7 Status 24/96.

Hey DSevenPL,
Have you sorted this issue yet? I'm having the same problem on my mid 2012 Macbook Pro.
I had been running the sound card earlier on the same machine that you have (late 2011) w/out a problem but then got the new machine and it wouldn't read the sound card. Same issues as you.
Months of searching has turned up with nothing (and Sinn is unresponsive) so any insight would be greatly appreciated!
K x

Similar Messages

  • Problem with dual boot after upgrade to Mountain lion

    Hello Every One,
    I have a Macbook pro from 2009 which had dual boot option Windows 7 + Snow Leopard.
    The windows 7 had 2 partitions (C; and D: an extended partition).
    I upgraded the OS X to Mountain lion. after upgrade the system showed 3 options at boot time. Mac, Windows and a recovery partition.
    when i boot to windows the D: drive is gone...I mean even though i can see the partition in partition software, windows 7 stopped showing D: in "My computer".
    So i used testdisk utility to get the D: drive back and now when i boot to mountain Lion i am able to access both C:(BOOTCAMP) and D: drives.
    but now the problem is during boot time my Mac Book pro doesn't show the windows option.
    Can some suggest a means to boot into windows 7? Also what is the purpose of recovery partition that Mountain lion adds to the system? I mean is it going to hurt if i get rid of it so that i can go back to my old configuration of 3  primary partitions (1 for windows 7 ...C: bootcamp + MountainLion) + 1 extended partition for D:
    any help would be appreciated?
    Regards

    Ragu79 wrote:
    Also what is the purpose of recovery partition that Mountain lion adds to the system? I mean is it going to hurt if i get rid of it
    Leave it: http://support.apple.com/kb/HT4718

  • Problem with iPad back up after installing Mountain Lion.

    Since installing Mountain Lion, the camera roll on my iPad does not download pictures.  It's a first generation iPad.  Is it not compatible with Mountain Lion or is there something I can do?

    Searching communities I found an Apple page Image Capture.  So I opened it with my iPad connected and the pictures were imported.  I still don't know whether I will have to do this every time or whether it has unblocked it!

  • Problems with time machine snow leopard to mountain lion

    I have recently upgraded from Snow Leopard to Mountain Lion now when I enter Time Machine the 'ladder side bar' will only display item from the date I went onto Mountain Lion even though the external HD has information datuing back 3 years, anyone had the same problem?

    Hi,
    http://pondini.org/OSX/Setup.html
    http://pondini.org/TM/B6.html

  • I am having problems with AOL since downloading new OSX Mountain Lion

    Since downloading OSX Mountain Lion I can't access AOL Mail  -- has a line and a circle next to each e-mail.
    Any suggestions. 

    See the discussions under "More Like This" at right.

  • The problem with mail app using Helvetica font (Mountain lion 10.8.2)

    I used mail application to send an email (Korean Language) with Helvetica font. However, the receiver could not read the content because a mess content with symbols was displayed. How can I solve this problem?
    Thanks a lot

    chiennguyen wrote:
    I used mail application to send an email (Korean Language) with Helvetica font. However, the receiver could not read the content because a mess content with symbols was displayed. How can I solve this problem?
    You didn't really use the Helvetica font, because that font has no Korean characters.  You just sent Korean text in an encoding which the recipient did not understand.  Use the Message > Text Encoding menu before sending to try a few different encodings, like UTF-8, Korean EUC, and Korean Windows, to see which one works best for that receiver.

  • When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

    When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect  earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

    Hi Ganeshpandianm,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371?viewlocale=en_US
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Cheers,
    - Judy

  • HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

    Hi,
    I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
    When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
    Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
    So please suggest proper direction to use it and provide link to install any driver.
    Thanks
    Tauheed Ahmad

    Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and  3.0 knowledge. They handsUp that reason I posted my problem in this forum.
    So is there any better solution to use any mediator between these USB version handling, Please let me know.
    Thanks
    Tauheed

  • Problems with M-Audio Fasttrack Pro and Garageband after 10.5.2

    Hi all,
    I use GarageBand daily with my M-Audio FastTrack Pro and have had absolutely no problems until I installed the 10.5.2 update.
    Suddenly the Audio randomly cuts out when I'm recording, monitoring or playing back - also my recordings appear to skip and jump too. Usually I can rectify it by power cycling the Fasttrack but the problem re-occurs after about 30 seconds of recording.
    I have double checked the I am using M-Audio's latest drivers and have repaired permissions and the disk. I was wondering if anyone else had had any problems with this?
    All help would be appreciated, looks like I'm going back to 10.5.1 though.

    Hi !
    Still no answer from M-Audio but it seems that they are not in cause.
    I read on several topics of Apple's Forums some similar problems with other audio devices and also with some USBhubs.
    I ran some little tests and for my case, using the other USB port of the MacBook seems to resolve the problem (but that's not a permanent solution for my point of view).
    Using a selft-powered USBhub works also, even on the port that makes it crash without hub.
    As I studied a little bit of electronics, it looks really like a problem of power supply through USB to me. It could be some kind of micro-cuts (or micro-undervoltage) that are sufficient to cut the audio stream and freeze a bit the system but not enough for MacOSX to switch significantly to the internal audio.
    But two questions still remain :
    Why one USB port of the MacBook and not the other one ?
    Why since 10.5.2 ?
    Steve, if you hear me ;o)
    'Hope they will react quickly !

  • Error - itunes has detected a problem with your audio configuration...

    Can anyone help me with this one?
    "itunes has detected a problem with your audio configuration. Audio/video may not playback properly."
    I can get into itunes - but nothing plays - not the radio - not my playlist.
    Please help!

    Then you may have a startup item (an item that starts up when your computer starts up) that is interfering with iTunes/Quicktime. Try following the advice here and seeing if there's anything starting up that doesn't need to be:
    http://www.g4tv.com/screensavers/features/38454/ManageWindows_StartupItems.html
    Be careful of what you remove.
    Also, if you have any sort of USB or such audio hardware, try removing it and trying again.
    =)

  • Skype won't recognize my M-audio usb interface

    I am planning to offer online bass guitar lessons through skype. To accomplish this, I have an audio usb interface where I connect my bass guitar to. I can hear my bass perfectly but for some reasons, skype doesnt recorgnize any coming from my audio interface. I already checked the settings in skype and I already chose my m-audio interface as the audio source. Pls help me guys.
    Attachments:
    skype.png ‏215 KB

    I have the same problem..

  • ITunes cannot run because it has detected a problem with your audio configu

    I just upgraded through the auto upgrade feature and, whilst iTunes was working perfectly before the upgrade it now refuses to start, displaying a dialog box with
    "iTunes cannot run because it has detected a problem with your audio configuration".
    Now, given iTunes was working perfectly beforehand what has caused this? I've tried restarting the PC, reinstalling the new iTunes from a fresh download, deinstalling and reinstalling the new version to no avail. I have now tried to reinstall the old version and I get the same error message.
    System is a WinXP / AMD64 / 2Gb RAM with an Edirol FA-101 firewire audio interface (still replays sounds via Windows Media player so it's not that!)
    Anyone got any ideas?

    Have a look at this article in the Apple Knowledge Base and let us know if it solves your problem.

  • I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

    Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

    I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
    iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
    However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
    To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
    However, I would also like to rent movie's from iTunes, 
    Would be great if iTunes would let you choose the output device, too, like most other applications using sound  from Skype to Windows Media Player,...

  • Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point my PC running XP loses all audio.

    Several attempts to upgrade to iTunes 11 have failed.  After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray.  Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
    I did that.  I reinstalled iTunes 10.5.  Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
    What might be the problem with my audio configuration?
    Why doesn't my iPhone 4S work with iTunes 10.5?  It used to work with iTunes 10.5.
    Please advise.
    ep

    This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
    Regards.

  • Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

    Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

    I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
    But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
    How are you adding the files to Compressor?
    In FCP, what are your footage properties (command-9) and sequence settings (command-0)

Maybe you are looking for

  • Restriction of addition of Schedule lines to a sales order/scheduling agrmt

    Dear Gurus, I need to restrict addition of new schedule lines to a scheduling agreement till all the goods in the previous schedule line have been delivered. I tried applying a delivery block at the SL line level ( in the SL category). But to my surp

  • How can I go back and forth between Word and FrameMaker

    I have a client who has all their documentation in FrameMaker, but needs to export to MS Word to distribute files for editing by various parties. Once edited, my client needs to bring the updated text back into Frame, ideally without having to re-for

  • One-to-many mapping to existing schema

    I've been playing with the Kodo eval for a couple of days now, and have run into a brick wall. My problem is probably trivial, but I'm afraid I can't get it to work: I have the following existing tables that model a 1-m mapping between users and thei

  • AAE- Sender ABAP Proxy to SOAP - Payload not reaching PI 7.10 SP4

    Hi friends, I am developeing interface from Solman to PI to 3rd party. I configured the interface using ABAP stack and it worked fine.  Then i changed the RFC destination used in SXMB_ADM to point to adapter engine so that i can use AAE. I configured

  • Receive mail body content

    I have problem with receive mail. IOException "no content". My code: Folder folder = store.getFolder("INBOX"); folder.open(javax.mail.Folder.READ_ONLY); Message[] message = folder.getMessages(); for (int i =0; i< message.length; i++) { Part messagePa