Problems with smart sharpen

I have installed Photoshop CC.  When i open Smart Sharpen i do not see the same features available as what is shown in you promo for Photoshop CC?

Stan, i think currently you are using Photoshop CS6 not CC as PS CC is not launched yet. It will be available next month. So, you will get all the new features like Smart Sharpen, with PS CC only, not with PS CS6 that too next month when CC is launched.
Hope that clarifies your doubt.

Similar Messages

  • Problems with smart sharpening in Photoshop CC 14.2

    When I open the smart sharpening filter, the hand symbol pops up and Photoshop doesn't do anything anymore. With Ctrl - Alt - Delete I have to shut down the program. All other filters work correctly. I also removed and installed Photoshop CC again, but the problems are still the same.
    Can someone advise?
    Regards Piebe

    Smart Sharpen was one of the things tweaked in 14.2 so it may have been to do with your Preferences > Performance settings.  (In case it goes wrong again)
    From this page
    Additional improvements
    This update also includes many other improvements to Photoshop CC, including improvements and enhancements to Scripted Patterns and fills, performance boosts for Smart Sharpen using the Mercury Graphics Engine

  • How do I fix problem with Smart Sharpen & CR as filter

    Smart Sharpen doesn't apply (or apply completely).   Photoshop CC on Mac OSX 10.7.5
    new merged layer > Filter > Sharpen > Smart Sharpen > adjust sliders > toggle Preview > click OK (progress bar) > nothing or 50% applied
    1. Smart Sharpen (SS) shows changes from sliders in SS dialog box AND on underlaying image in PS  but  checking and unchecking the Preview box only toggles the image in PS, the SS dialog box does not change.
    2. After clicking 'OK' SS does not  seem to apply at normal ranges but when the radius is cranked up to super ugly it appears to apply at about 50% (Opacity and Fill are at 100%).
    Related Problem:
    After using 'Camera Raw as a filter' on a new merged layer, then adding a layer mask, and then painting with a brush at 100% opacity and Flow, it appears that only about 50% opacity is applied to the mask from the brush.

    I did a lot of such hymn things in the past, but I was alway working on the scans in Photoshop, like adjusting, retouching spots and cropping. And I was always seperating those images to be more flexible so I never run into such a problem.
    I am always scanning in a higher quality level than I would need, I scan it in color, this allows me to eliminate paper color easily, even if I need 1-bit images at the end, I do it in color, so I can also turn the image.
    I did once run into a similar problem with a scan I have got from a copier-scanner machine (it was not a song). But saving as PSD resolved my problem.
    So I would suggest: Open your files in Photoshop, resave them as PSD files and use those instead. If you use 1-bit images (which is fine for this type of images) you should use a resolution equal to the printer's resolution.

  • Problem with smart Playlist after Upadte to 10.6 - PLEASE UPDATE SOON, Backup not possible

    Apple, Apple, Apple... (again)
    Is it so difficult to let things, that are quite good, just there where they are??
    After updating my iTunes, OS Lion and some other stuff 2 days ago, I have now a big problem with a smart Playlist in iTunes 10.6. Before updating all things was right.
    The problem: Now, AFTER UPDATE, my Playlist ist totally empty!
    Before they were over 2000 songs in it.
    And because this is my major-smart-Playlist, which is established to my whole other Smart-Playlists, the other ones are also empty.
    And this is not the first time Apple.
    It´s good, if you - apple guys - just added something like new categories to sort of music (like "iCloud-Status" or some others).
    BUT WHAT DID YOU THINK, WHEN YOU DELETED THE OPTION "VALUATION" - mh??? (I hope in english this is the word that used in Itunes - my iTunes is in German)
    So I don´t mean the "lines" - I don´t know the right english word - when you see the music. There you can fade in "Album-Valuation" - new -  AND  "Valuation" - old.
    But I mean in the options of the smart-playlists - THERE ARE ONLY "Album-Valuation"!!!!! What the heck....
    EVERYONE NEEDS THE NORMAL Song-"Valuation" - and not the album (because normaly you decide by each track how good he is and not by the whole album).
    You can let the Album ones in it, BUT PLEASE BRING THE NORMAL ONE BACK.
    So, in my case, I tried to go back to iTunes 10.5.3 with my nice Time-Machine-Backup. So, but I couldn´t because there came a bug-message that said something like "It is not possible because OSX need the Programm".
    What is that?
    I also couldn´t delete the iTunes app from my app-folder.
    So, and now?
    I had to totally restore my volume !
    What is that for a solution?!
    So please think before you delete any functions, who is needed by many people.
    And if you did, maybe ask some users, that uses  for example smart-playlists alot, if there is a problem about some changes, you want to add.
    I hope anyone from Apple read this and also answer me. Because I´m upset about that.
    In every iTunes-Update I am concerned about what will be after the update.
    For example in the past, there was more than one changes in iTunes with the Valuation. First, there was just whole stars to set for every song. Than, after a long time, Apple decided to give the options for also half stars. So I said to myself - hey that´s great, that I don´t have to use external apps anymore to set these. So I did this to many of my songs (and that´s many).
    Than - after an Update - wow, all half stars rating are gone ! Great Apple, really great.
    I was VERY upset.
    So after an other update, the opportunity to give half stars are back.
    I thought, my god, it is so difficult to talk with other guys, that worked before on iTunes if I am new or just to look if there was already a change in that part of the app???
    So, apple guys, please don´t think that I want to attack you. But please be more carefull in the future. I hope that I don´t have to worry too much about so stuff. I really have better things to do with my time.
    So, have a nice weekend.
    Greetings from Germany.
    Marco Blum

    Hi..
    Use Lion Recovery  to reinstall the Mac OS X.

  • 42L6200U - Problems with Smart Apps

    I love my new Smart-TV! However, there seem to be some problems with the included apps.
    1.  Vudu Movies fails to connect regularly although the wireless network connection is functioning properly.
    2.  Flickr app included in Vudu Apps sends me to a non-existent web page to obtain a password.
           (http://www.vudu.com/flickr)
    I have contacted Vudu about this and they sent me to Flickr
    I have contacted Flickr about this and they sent me to Vudu
    I updated the firmware as soon as the TV was delivered so am running the latest versions.  I would appreciate assistance from anyone who has experienced the same or similar issues.
    Thanks!

    Yes, my Netflix app is working perfectly. Very impressed with the quality of the streaming!
    My biggest annoyance is Vudu Movies!  I connected yesterday afternoon on the second attempt.  Last night I tried 10 times without success! 
    I am going to hard-wire the TV to my local network and see if that makes any improvements as compared to the Wi-Fi connection.

  • Problem with smart view

    hi, there seems to be a problem with the smart view very often that suddenlly the hyperion tab goes invisible and when i go to the addin and check the hypeiron tab then the hypeiron tab does not appers but a toolbar appears in the excell and all the links are deleted
    now when i create the essbase link and try to connect in the end the excell shuts down with unexpected error now after i re install the smart view the tab appears and workls finebut then suddenly after somdays the same thing happpens
    what could be the problem, i am using excell 2007
    thanks in advance

    Its been solved thanks

  • Problems with Smart List in Forms.

    Hi,
    I set Smart List in my Account Dimension.
    In HP Documentation (9.2 and 9.3.1) I read that is posible to allow or not allow a user using Smart List for a specific member of account through a form option.
    I already used this option in HP 9.2, but in 9.3.1 it do not exist this option in dataform, even so in 9.3.1 documentation says that it's posible.
    I wanna Know if someone have used this option in 9.3.1.
    I have been thinking in re install Planning or duplicate member that I need use sometimes with Smart List and sometimes writing a number.
    Any idea???
    Thanks

    tbian wrote:
    John,
    That is true, it states that there is an option to turn Smart List off and on for any data form. It does state within the admin guides but I don't see the option when I edit the data forms.
    Am I missing something?
    Best Regards,
    Tammy Bian CarlileI think the documentation is saying you can either have all the forms displaying smart lists or the other choice is not to have them, this is defined by using the evaluation order.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Problem with smart guides in CS5 with converting type object to outlines.

    Hi There,
    I recently upgraded to Illustrator CS5, and am having some issues with the smart guides.  I create some type with the text tool, then convert that type object to outlines.  Now, when I want another graphical object to "snap" to any of the anchors of the outlined text graphic, the smart guides don't kick in!  The problem does not seem to occurr if I make a standard graphic with other tools, only when I create a graphic from a type object.  I need to be able to snap to graphical objects that are created via the convert type to outlines command.  Has anybody experienced this issue before?  It's kinda frustrating.
    The issue didn't seem to happen in CS3, and I've noticed the design of the smart guides is a bit different in the CS5 version as well.  Am I missing something?
    Any tips would be greatly appreciated.  Thanks!

    When you switched to CS5 did you turn on view >> snap to Point
    If your snapping tolernace is set to a small value, you may need to zoom in more to get snapping to work, or just increase the value. Also make sure you have the appropriate items checked (eg:Anchor Path Labels)
    Edit Preferences >> Smart Guides >> Snapping Tolerance

  • Problems with smart albums iphoto 08

    Hallo,
    I can't create a new smart album. When I try to create an album there are no options to create a rule.
    When I try to edit one of my smart albums the part where I can edit the rules doesn't open. Sometimes iphoto shuts down at this point.
    I allready deleted iphoto.plist - but nothing changed.
    When I start on the same computer with another account iphoto works without problems.
    Any help?
    Thanks Markus

    Welcome to the Apple Discussions.
    When I start on the same computer with another account iphoto works without problems.
    This tells us that iPhoto is ok and the problem is local to the specific account or Library. Let's see if it's the Library:
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

  • Problem with Smart Form ('RLE_DELNOTE')--Please Help

    Hello,
    I am facing a problem in the smart form.
    So far I am printing certificates (QM module) for the finished goods.  i.e. first level batches.  Now I should incorporate down level batches info also. i.e. semi finished goods info (second, third... level batches).  I am not aware of how to find out the semi finished goods info of a finished good.  Each finished good may have one or two levels of semi finished goods....The print program i am using is 'RLE_DELNOTE'.
    Can any body suggest me what i have to do?
    I have tried with FM 'CHVW_BATCH_WHERE_USED_LIST'.  But is of no use.....please tell me...
    Best Regards,
    Shekhar

    To check to see if you have an OpenGL problem:
    In Photoshop choose Edit - Preferences - Performance.
    Is [ ] Use OpenGL Drawing checked?
    If so, uncheck it.
    Close and restart Photoshop.
    Does the problem persist?
    If so, you probably can correct it with a video driver update.
    Don't forget to go back and re-enable Use OpenGL Drawing.
    To update your video driver:
    Right-click on your desktop and choose Screen Resolution.
    In the dialog that comes up, choose Advanced settings.
    Click the Adapter tab, if it isn't already current.
    What Adapter Type is listed?  Note the brand and model.
    If it is an ATI model, visit this web site:
    http://support.amd.com/us/Pages/AMDSupportHub.aspx
    If it is a nVidia model, visit this web site:
    http://www.nvidia.com/Download/index.aspx?lang=en-us
    Follow the instructions to choose the proper card and operating system.
    Download and install the latest drivers for your hardware.
    -Noel

  • Problem with Smart Update in WLS 9.2

    Hi
    I have installed AquaLogic Service Bus with Weblogic Server 9.2 and when I try to run Smart Update it tells me there is a patch that I need to download. I click ok and then when smart update tries to restart I get an error:
    "Could not find the main class. Program will exit".
    I don't seem to be able to get passed this. Any suggestions?
    Best regards

    Petra Sandberg <> wrote:
    Hi!
    I'm trying to install patches via Smart Update for WLS 9.1 on a Solaris ,
    when I run bsu.sh the GUI starts and then presents an error: "Unable to
    locate any supported product installations. The tool will now exit". Does
    anyone have any suggestions to correct this?Check if the home directory of the user also contains the bea directory.
    So ensure that the same user is used for the bsu as you installed the
    product.
    B
    Schelstraete Bart
    [email protected]
    http://www.schelstraete.org
    http://www.linkedin.com/in/bschelst

  • Problem with Smart Albums in iPhoto 5

    I have created a number of Smart Albums using 2 criteria: a selected date range and that the keyword is not "icons". Every time I close iPhoto, the 2nd criteria seems to get reversed so that the only photos in the album are the ones that DO have the keyword "icons". However, when I go to Edit Smart Album, it does not appear that the criteria have been changed. Then I save the settings and the albums appear as I want them - until I close iPhoto and the problem reoccurs. Has anyone else experienced a bug like this? Is there any way to fix it?

    I see all my smart albums in iTunes when I sync the iPad. But sometimes iTunes is confused about the current library. I have several iPhoto and Aperture Libryries, and I noticed that iTunes sometimes still tries to sync the previously opened library, not the most recently opened one. To be able to tell which library iTunes is showing, I name one of the projects exactly like the library. So I can tell easily, if iTunes is syncing an older copy of the library.
    For example a small test library named "iPhoto Library" containing one smart album:
    Regards
    Léonie

  • Problems with Smart Wireless Headset Pro after upgrading my Xperia Sola to ICS

    Just want to let the community, and Sony, know that since I "upgraded" my Xperia Sola to ICS, the Text to Speech on my Smart Wireless Headset Pro is not functioning. It used to work just fine when I had Gingerbread on my phone, but when I upgraded to ICS, the Text to Speech voice is not output on the headset, but on the phone, on the call speaker... Hope this bug gets fixed soon.
    Maybe someone already knows of a solution?
    Thanks in advance.

    There is a new update available for the Smart Wireless headset pro, MW1 (0.1.C.0.3).
    Which software version are you running your MW1 on?
    If you don't have the latest I suggest that you use SUS to update your software.
    http://www.sonymobile.com/gb/tools/update-service/
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Problem with smart forms.......

    Hi friends, I m facing a strange problem while using smart form. I am using values from standard smartform for invoice n just modifying the layout. The problem is tht,the value i m getting is like '14.223,56' bt the actual value that i want should be  '14,223.56'. That is the '.' and ',' are interchanged. Please tell me some way by which i can make it right.
    Good points will surely be awarded for answers.
    Thanks..........

    Have you checked your user defaults in transaction SU01
    under the defaults tab there is a section for decimal notation.

  • Problems with smart collection "doesn't contain"

    I have photos with keywords like
    xxxxx, grand canyon,xxxxx
    xxxxx, grand island, xxxxx
    xxxxx, grand sable dunes, xxxxx
    What I need is the abilty creat a smart collection that excludes grand canyon, but leaves in grand island, grand sable dunes
    I can't get doesn't contain to work with
    grand canyon
    "grand canyon"
    Any ideas?

    Tudor asks, "What I need is the ability to create a smart collection that excludes grand canyon, but leaves in grand island, grand sable dunes".   Tudor wants to exclude "grand canyon", but include "grand island", "grand sable dunes", "red rock canyon", and presumably every other keyword except "grand canyon".
    BKKDon's suggestion of
    Match all: Keywords contains grand; Keywords doesn't contain canyon
    doesn't quite work, because it excludes "red rock canyon".   A somewhat better query might be:
    Match none: Keywords contains words grand canyon
    The "contains words grand canyon" will match all images with the words "grand" and "canyon" in the keywords, and "Match none" inverts that and selects all other images.  
    But this still isn't right, because it will exclude an image having the two keywords, "Grand Island" and "Canyon Drive".  As Rob explained, the Keywords criterion splits all the keywords up into "words", and then treats all the words in all the image's keywords as a single field to be searched.
    Two possible workarounds:
    - If you just want to manually exclude images with the keyword "grand canyon", use this recipe: 
    In the Keyword List pane on the right, click the arrow to the right of the keyword "grand canyon".  This will filter just those images with exactly "grand canyon". 
    Select all the images.
    Turn off the filter by clicking None in the Library Filter bar.
    Do Edit > Invert Selection to select all the images that don't have exactly "grand canyon".
    Add the selected images to the Quick Collection or another collection, if necessary.
    - Use the plugins Space Urchin or Any Filter, as Rob suggested.
    In general, LR's text-matching operators are a mess.  Inexplicably, LR doesn't have exact match, the most basic keyword operator, and without exact match, it's difficult to work with a controlled vocabulary of keywords, as this discussion and many others have highlighted.  Users repeatedly get all twisted up trying to understand how to use LR's weird text-match operators.

Maybe you are looking for