Problems with software the update with Nokia 6233

Problems with software the update with Nokia 6233
Hello,
I have so far some-paints tries my software to update.
Each time the update procedure begins, sometime stands then on the telephone “test mode”.
On the computer wars I the reference in the update manager “connection to the telephone broken off” and wants the update to again start.
If I change my profile attitudes since that for example, then after a telephone restart again deleted.
What there can I make?
GreetingsMessage Edited by adisaily on 24-Aug-2007 09:03 AM

It sounds like your 5800 has the earpiece fault that was common with 5800's made before February.
You need to take it to a nokia care point for repair under warranty.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Similar Messages

With all the updates with Firefox and Yahoo, My Yahoo homepage no longer works or functions at all. It doe's work on Safari. When I click on anything on My homepage all I get is a message" sorry bad request".

I also often have to do a forced quit as firefox freezes up. I did not have these problems until I tryed to upgrade to firefox4. for Mac.
I tryed re-enstalling 3.5 but ended up with 5 which was worse. It appears that Firefox and Yahoo are no longer compatible.

I know you can't help with my Yahoo problem, however, apparently at some time in the past I have went to the Sync and tried to figure it out on both my laptop and my desktop, because I have the long snyc key information. However, when I go to try to sync both computers I never get the box to enter that key on either one. That is my problem. So should I try and get a new sync key and see if that works.

Experiencing the problems while encoding the barcode with Code 128 font

Hi Tim,
Hope you are doing good.
We are experiencing the problems while encoding the barcode with Code 128 font.we have followed the Oracle BI Publisher Blog i.e Barcoding 102 http://blogs.oracle.com/xmlpublisher/discuss/msgReader$281.
Before applying the encoding Java class we were able to display the barcode but after applying this encoding Java class we are not able to display the barcode.
We are requesting you to help us for encoding the barcode with Code 128 font and read barcode by scanner.
We will appreciate and thankful if anybody help us in this regard
Thanks,
SubbaRao.

Hi Tim,
I am trying to create 128 Barcode, output shows little junk characters. I followed the your "Barcoding 102 instrucitons but no luck. I apprciate your help if you provide some help on this.
http://blogs.oracle.com/xmlpublisher/2006/06/06
1. Created Java class under $JAVA_TOP/oracle/apps/oracle/xdo/template/util/barcoder
2. Registeted and applied the format the barcode to the form field. I will sedn my XML, RTF and Java class, Would you pleae advice me on this
Thanks
Venu

I just made the update with "Mountain Lion" on may MAC. Now I am not able to open all my Word-Documents any more. What can I do?

I just made the update with "Mountain Lion" on my MAC. Now I´m not able to open all my (old) Word-Documents any more. What can I do?

Office 2004 Applications Won't Work in Lion
You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

Maverick has been completing the update with less than one minute remaining now for well over an hour. Where do I go from here?

Maverick has been completing the update with less than one minute remaining now for well over an hour. Where do I go from here?

try this
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
if that doesn't work then connect to a computer and try to open the device in itunes

When I bought my iPad there was a feature that allowed me to voice record reminders. What happened to this feature. With all the updates, it is now gone.

When I bought my ipad 2 a few years ago there was a feature so that I could record reminders. But with all the updates, this feature is now gone. What happened to it? Also, on my iphone and imac, I can dictate and it types for me. I thought I had this feature on the ipad too, but can't find it. Does it not exist for the ipad 2 or do I have to download an app?

Your Mac will need internet connection : http://support.apple.com/kb/HT5449
For your iPad there is Dragon Dictation which might work (I haven't tried it)

Problem I can not Update new Nokia X6 8Gb firmware...

Problem I can not Update new Nokia X6 firmware Version V.21.0.005,
can someone tell me where can I get new Nokia Software Update for X6 8Gb,
I tried to update new firmware, but this is new version is not Aviable
where I can get new version in my phone serial number: numbers end
in ( 2587 ) and when will update available for my phone serial number be
Thank you

Reasons why a phone cannot update:
1. It is a country variant - country variants often get the updates later, or have updates skipped altogether. A Turkish country variant product code for example, skipped v40 and updated from v31 straight to v50.
2. It is network branded - phones acquired from network providers or these providers' stores SIM free are branded, and will not get updates until the networks approve and modify the updates to their liking.
3. Special editions - These special editions are chartered editions and may never get updates unless taken to a Nokia Care center.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

HT4623 ipad froze and shows itunes with plug while updating with iOS

ipad froze and shows itunes with plug while updating with iOS.

That message means that you have to restore the iPad using iTunes now. Something went wrong. This explains how to do it. Read it thoroughly before you start - and take note of the end of the article under Additional Information where it talks about using recovery mode. You might need to use it.
http://support.apple.com/kb/ht1414

How to create a textfile dynamically(with in the loop) with given data?

Hi all,
Can anyone Please guide me how to create a text file in the given path dynamically? (with in the loop) with given data.
For example:
<%
String data1="name";
String data2="address";
for(int i=0;i<10;i++)
create the textfile at c:/test/sample.txt//name of the each file created being "sample.txt"
//contents of text file will be
data1+i; //to get name1,name2.....
data2+i// to get add1,add2........
delete(sample.txt) //to enable to create another file in the loop with same name
%>

The code which Ashokan mentioned is not is not creating a file.
i used code given below to create and write into it.
But, not is writing into it. I don't konw, where i am going worng !
Code
String sample2="C:/Ash/sample2.txt";
                                                                                FileWriter fw = new FileWriter(sample2,true);
                                        BufferedWriter bw=new BufferedWriter(fw);
                                        bw.write("EMP ID");
                                        bw.newLine();
Please help
Regards
aSh

I updated my iPad 2 OS to iOS 6.0..after that I am unable to download or update anything from the App Store. The MSG I get is "id not valid for US store. Go to Indian store for purchase"..never faced this problem earlier before the update to OS 6..help!!

I updated my iPad 2 OS to iOS 6.0..after that I am unable to download or update anything from the App Store. The MSG I get is "id not valid for US store. Go to Indian store for purchase"..never faced this problem earlier before the update to OS 6..help!!

Apple's response to my email:
"I understand that you can't update your apps using your iPad.
Apple is currently working toward a resolution for the issue you have reported. You will receive an email after the matter has been investigated and further information is available.
Thank you for your patience. Apple wants your iTunes experience to be as enjoyable as possible. Have a great day!"

Problem with filling the forms in Nokia browser af...

Hello,
I updated my Nokia 808 to FP2 successfuly. But i realized one problem in web browser and the new keyboard. For example when i want to write into a form box i can only see virtual keyboard. I cannot see what i type. If you want to test this, please open your local nokia website and click on support / e mail us. You will see a form which will ask your phone model and OS etc. Try to type into the boxes. Yesterday i failed to write anything. Also reaction is very slow. You can see what i m talking about in the attachments.
Also with the new update, videos are not working correctly. Sometimes video player is crashing. Sometimes i see strange and colourful images while it is trying to play the video. Then it turns to normal and i see the video clearly.
Im satisfied with some new things in the update but there are problems and slow downs. Some features are not working such as Nokia Social. I hope Nokia Team will find a solution. Thank you.
Attachments:
Fotoğraf0001.jpg ‏183 KB
Fotoğraf0150.jpg ‏179 KB

HI ilkerol,
Welcome to Nokia Support Discussions!
Thanks for the feedback! I tested the support form with the same results, the page was slow and kept on moving up to the top when I was typing in the textbox. I tried it with a Lumia device, and even though I was able to fill the textbox without problems, the drop down menus did not work. Based on that experience, it seems that the form is meant to be used with a personal computer, not a mobile device. I will, however, escalate this issue in case there is a possibility of a quick fix.
As for the video issue, does this happen with all videos or just certain ones? Colorful images etc. usually mean that the video file encoding is somehow broken and the player cannot read it properly.
Hope this helps!
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Problem with Software Security Update 2014-002 1.0

Hello, since yesterday I see in my APP STORE Security Update 2014-002 1.0
Unfortunately, when i try to install it, system reboot, and restart my computer, after restarting the update is still visible. And so on, restart & installation, again and again and again, visible, restart, visible ..
Any one can help me with that ?
Thanks.

I try to install this udate manually, from http://support.apple.com/kb/DL1740
When software finish update my system, another restart has come.
And now everythig is ok..

Problem with software that came with Pima Mx 472 printer

I installed my image garden software that came with printer. No problems till tonight when I opened software to scan some photos. Before I could scan the first photo, the program crashes. I reopened and scan 1 photo. Program crashed. I reopened 3rd time, scanned to more photos. While renaming the first photo, program crashed.
Verison is 2.1 My computer is win7 64 bit. Anyone else having same problem.

My assumption is that since you're not on the Verizon network currently and you don't have access to the network, you can't OTA the update.
And since you don't have the USB data cable, you won't be able to connect your phone to your computer to update. My best suggestion... Get a data cable. There should be someplace nearby you in Germany where you can get an inexpensive data cable.
Then go about backing up your phone with the desktop manager and then update via the DM as well.
No, you can't be on TV.
Yes, this camera is heavy..
Go bother the reporter...I'm busy!!

Problem with sound since update with 10.4.9 (no problem with with 10.4.7)

Since i update with 10.4.9, I observe some problems with sound that I don't observe with 10.4.7 on an old partition:
1. no more sound when opening excel file with office
2. no more sound with files .rm opened with realplayer
3. no more sound with files .wmv opened with lecteur windows media player.
Ths files are opened normally with 10.4.7 that I conserved on an other partition.

Welcome to Apple Discussion!
This is a well known bug with the optical audio based Macs with a very simple fix:
http://docs.info.apple.com/article.html?artnum=300832
Hopefully that's the one you encountered.

TS1362 I am running windows xp with all the updates. I have an HP Pavilion with an AMD athlon xp-m processor. I have the most RAM I can install on this PC (1 gig). I also have plenty of disc space(over 60 gig). Why can't I play my .MOV files correctly.

I cannot get the .mov files I recorded on my I-phone 4 to play correctly( i.e. no audio, video jerky at best), on my HP Pavilion laptop with an AMD athlon xp-m, OS=XP, 1 gig ram, plenty of hard drive space >50 gig. Just not enough RAM or am I missing something? I have updated all I can(Quicktime, I-tunes etal). Any ideas?

My first thought when reading your post ( video jerky) is that the CPU doesn't have enough horse power? What is the GHz of the AMD athlon? 1.8 GHz would be right on the edge with video. And where the computer will max out at 1 Ghz of RAM indicates the laptop is older and the CPU probably as well. 1 GHz of RAM maybe low on today's computers but would not be an issue if the CPU was perhaps 2.8 GHz. The audio is less demanding by far on CPU's than video, so that could be a codec?

Problems with software the update with Nokia 6233

Similar Messages

Maybe you are looking for