Problems with sources of supply determination for external requirements.
Hi gurus...
My scenario is SRM Classic Extended.
We have a problems with sources of supply determination for external
requirements comes from ECC. The shopping cart is created with successful
based in the purchase requisition at ECC, but when i try to make the
determination of sources of supply the system doesnt find any source of
supply.
There are a lot sources of supply creates for these parameters. The
contracts were already replicated to ECC.
This problem only occurs with external requirements comes from ECC, if i
created a shopping cart directly at SRM, using the same parameters, the
system propose the sources of supply correctly.
Is there something that we can do?? This is the normal comportment for the souces of supply?
Tks,
Gustavo Nogueira
Hello Gustavo Nogueira
Then it is an issue.
How are you searching the source of supply in sourcing cockpit.
Can you replicate the issue?
Let me know step by step,
as per standard SAP , source of supply data must be available for shopping carts so that buyer can assign the source of supply.
please share what source of supply you have there .
Similar Messages
-
Customs document type cannot be determined for external document Type F8
Hello Experts
Need help
I am trying to transfer F8 to GTS 10.1 and getting following message in GTS Transfer log for export:
Customs document type cannot be determined for external document Type F8
New implementation
GTS 10.1 running with SP 12
ECC side Plug-In settings are fine. BAdi is Active.(There is no document mapping for F8/CUSDEC as it is not required in 10.1)
GTS side configurations are also fine. Checked several times by 4 sets of eyes!!
(Include general settings configurations, Customs communication configurations:)
(Defining technical medium, conditions/output parameters, defining messages for communication process,
defining determination for activity sequence and control settings for communication process)
Despite this I am not able to trnasfer F8 successfully
Can someone throw some light on this issue please?
Keshav Murthy
[email protected]Hi Dhilipan
Here we go..
You asked me to check the following
Please check following things
1) Legal regulation is activated. - Yes Activated
2) Process template assigned to the legal regulation - Yes Assigned
3) Activity Sequence determination - Yes done
4) Open the activity sequence in under Control settings for Communication processes and check if there is a document type assigned to it. Table- /SAPSLL/TLEPAF - Yes done.
It is really puzzling.
Thanks
Keshav Murthy -
There seems to be a problem with the file download. For troubleshooting tips, please visit our customer support page.
Thank you for the update Dlawrenceusa. I would recommend reviewing the installation logs for the updates that are failing to apply to determine the exact cause of the failure. You can find details on how to locate and interpret the installation log files at Creative Cloud Help / Troubleshoot install issues with log files | CC. You are welcome to post any specific error messages you discover to this discussion.
-
Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.
Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.
-
I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help
Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
http://www.apple.com/itunes/
If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
1. Open the control panel
2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
3. Navigate to "Apple Software Update" in the list and click on it
4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
Once you repair this, try running iTunes and the update again.
Fingers crossed! -
I keep getting an error message that reads: There is a problems with this windows installer package A program required for this install to complete could not be run. Contact your support personnel or package vendor. How do I correct this problem. HELP !!!!!!!!!!!!!!
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I went to upgrade itunes and when it finally downloaded, i got the following message: There is a problem with this windows installer. A program required for this install to complete could not be run.
I was advised to unistall the old itune, which i did and then loaded the latest itune 10.5 i think. It dowloaded fine to a point and before finishing, it came up with the same message.
Is the problem with the itune installer or my windows installer on my laptop?Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
When `ve downloaded the latest itunes and then i go to install it i get a message saying there is a problem with this windows installer package a program required for the install to complete could not be run, contact your support personnal or package vendor any ideas anyone ? thanks
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
when trying to install itunes and i get a error that says there is a problem with this windos installer package. a prodram required for this install to complete could not be run. contact you support personnel or package vendor
I have the same problem
-
I can not do the update , what should I do to fix this error ?
"There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanksHi,
Please refer to the help document below:
Error downloading, installing, or updating Creative Cloud applications
Regards,
Sheena -
Having trouble trying to install itunes 10.5. Receive message saying 'There is a problem with this installer package. A program required for this install to complete could not be found. Please contact product vendor'
Managed to get the installation sorted. Go to Control Panel, and where you have a list of all installed programs, repair all the Apple/Itunes related programs. Installation worked fine after that. Hopefully it helps you out too!
-
I had problem with my apps,they open for a while and closes with in seconds i cant acess them
i had problem with my apps,they open for a while and closes with in seconds i cant acess them and i had this with all apss,expect apple apps
Do you have a lot of apps? Did you use a lot of apps recently? If so, many of them may still be resident in memory even if you aren't currently using them. Double-tap the home key and you should see the app tray with a list of most recently used programs. Press and hold the icons in the tray and remove the ones you don't use often to remove them from memory. Powering off and then back on might also help.
My wife's iPod does that sometimes, and it's usually because we run out of memory due to apps remaining in memory even when not used. The suggestion above is how we normally fix the problems. -
i neen try to down load the new itunes 10.5 for windows vista but for some reason it is not working at all . this is what it show for the errors is "there is a problem with this windows installer package . a program required for this install to complete could not be run. contact your support personnel or package vendor" plz help me with this!!!!!!!
Repair your Apple software update.
Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
Start > Control Panel > Programs n Features > highlight ASU and click CHANGE then REPAIR, -
I keep getting this error message that says "There is a problem with this windows intaller packaage.a program required for this install to complete could not be run.contact ur support personnel or package vendor" what does it mean? and how do i fix it?
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I am getting a pop up box saying that there is a problem with the plug in container for firefox. It keeps saying do I want windows to find a fix for it and close it or do I just want to close the program. What is this plug in container for firefox and why am I constantly getting this message? It has been happening for the past month or two.
It means either you have a faulty/out of date plugin, or your firewall/antivirus is causing problems with Firefox.
Make sure you update all your plugins and disable unwanted ones.
https://www.mozilla.org/en-US/plugincheck/
https://support.mozilla.org/en-US/kb/disable-or-remove-add-ons
Also, make sure your firewall/antivirus is not blocking plugincontainer.exe from the Firefox folder in your computer. How you make sure that's not the case will depend on your firewall/antivirus.
Maybe you are looking for
-
MS SQL Server Transaction Log Problem
Hello, MS SQL 2005 Database on R/3 production system takes transaction log back up in every 15 minutes. I can follow transaction log backup being taken normally on SQL Server Management Studio, but it is not observed from DB02 Transaction. The system
-
how i can change dec in sm30
-
How to import only RAW images from folder with RAW & JPEGs?
My system is set up that I have both RAW & JPEGs in the same folder since I shoot JPEG+RAW. How can I import just the raw images without also sucking in the jpegs? There is no way to distinguish the difference in the Import box and also no way to eas
-
Hi all, I know there are a few of these already but I have just bought a PS4 and am looking for new people online to play with, Games I have so far Dragon Age Inquisition, Elder scrolls, battlefield hardline, evolve. Am really looking forward to gett
-
Hey! I have 2 small questions for THIS Question A - TABLETS When I define the body text, it seems to only affect the first header. If you pull this up on a tablet, you will see on the synopsis page--the contained background is "bloating", I believe,