Problems with starting elements 11 test version

Hy everybody
I installed the elements 11 test version (german). After installing appears the window with the adobe licence to agree. I click "agree", the window close, but it appears again. I can click several times "I agree", but the program doesn't start. It appears each time the licence window...
Please help!
Greets,
Nadia

Nadia,
This happens when  a user account becomes corrupted and prevents the installer from accessing or creating the necessary files and folders.
Please refer below mentioned link to resolve this issue:
http://helpx.adobe.com/creative-suite/kb/software-license-agreement-reappears-click.html
Please revert back if still faces the issue.
Thanks,
Shikha

Similar Messages

  • IF I RUN A EDITING WITH PREMIERE ELEMENTS TEST VERSION, WILL BE POSSIBLE TO SAVE THE WORK WITHOUT THE MARK  AFTER THAT I BUY THE LICENCE? THANKS

    IF I RUN A EDITING WITH PREMIERE ELEMENTS TEST VERSION, WILL BE POSSIBLE TO SAVE THE WORK WITHOUT THE MARK  AFTER THAT I BUY THE LICENCE? THANKS

    NUNU
    Media cache files are not involved in the removal of the Adobe watermark from the project.prel file from a tryout.
    Just a re-enforcement mention...you cannot remove the Adobe watermark from a tryout "saved" exported product; whereas, you can from a saved/closed project file (project.prel).
    By exported product, I mean a burn to disc in the tryout or the Timeline of the tryout exported to a file saved to the computer hard drive.
    In the case of removing the Adobe watermark from the tryout project.prel, classically you delete the rendered files (Timeline Menu/Delete Rendered Files) in the purchased program. In no way is media cache involved in this. Some of us have found that there was an automatic removal of the Adobe watermark resulting from just opening the tryout project.prel file in the purchased program.
    Please review and consider.
    Thank you.
    ATR

  • [svn] 3216: Fix for MXMLG-228, a visibility problem with graphic elements.

    Revision: 3216
    Author: [email protected]
    Date: 2008-09-15 18:13:11 -0700 (Mon, 15 Sep 2008)
    Log Message:
    Fix for MXMLG-228, a visibility problem with graphic elements. This is a quick fix that may force extra display objects when toggling visibility. We should investigate alternate solutions if performance is a problem.
    Bugs: MXMLG-228
    Reviewer: Deepa
    QA: Please check for performance problems when toggling visibility of a large number of graphic elements.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/MXMLG-228
    http://bugs.adobe.com/jira/browse/MXMLG-228
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/GraphicElement .as

    Hello Antonio;
    After many, many test I discovered that the problem, at least in my case it is caused by the new ACR 4.5. Please read the Thread that I post under Camera Raw. I include the link below.
    I also open two Bug Reports about this, but as usual Adobe (and other Software Companies) will never take responsability for this, until one day they release a new version with "enhancements".
    PSE6 Organizer Crash with ACR 4.5 (Vista Only?)
    http://www.adobeforums.com/webx/.3bb6a869.59b60d3e

  • Problem with installing Elements - from noob

    I have problems with installing Elements, it gives my an unknown mistake - I already have CS4 up and running, could this be the case?

    Chances are not very good that pse 4 will run on os x 10 6.8 unless you were upgrading from an earlier mac version that already had pse 4 installed.
    as per this:
    http://forums.adobe.com/message/4474236#4474236

  • Problem with Photoshop Elements Printing

    I have been using Photoshop Elements for a couple of years now and know it pretty well.  Today while attempting to print, a strange problem came up:  After going through the protocol to make a print, just before the image prints PE does a very fast auto correction that basically ruins all the color correction I have made on the image.  How do I disable this function?

    Hi and thanks for your reply. I checked the settings under "Print", "More Options", then "Color Management" and it only has "Print Space", none of the three options that you said I should have.  Am I looking in the wrong place?
    Date: Mon, 3 Sep 2012 11:14:57 -0600
    From: [email protected]
    To: [email protected]
    Subject: Problem with Photoshop Elements Printing
        Re: Problem with Photoshop Elements Printing
        created by 99jon in Photoshop Elements - View the full discussion
      Check your color management by clicking More Options in the print dialog There are basically three options:1) Printer Manages Color2) Elements Manages color3) No color Management Make sure everything is consistent e.g. if you choose Elements manages color make sure color management is switched off in the print driver. 
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4669848#4669848
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4669848#4669848. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Problems with Photoshop Elements 11

    I have a problem with Photoshop Elements 11, which i bought last week. Installing was completed according the instructions. When I started to use the program my one year old HP-computer with Windows 8.1 informed that there a failure in the Photoshop program and the did not open.

    attach a screenshot of the error message.

  • SOLMAN 7.0 EHP1 problem with starting SMD instance

    Hello everyone,<br><br>
    i have problem with starting instance SMD in my Solution Manager. After START this instance is status for one-two secend green and then status go to yellow color in SAP Management Console. I dont now where is problem, i try everything, can you help me?<br><br>
    Here is LOG from <b>dev_SMDAgent</b><br><br>
    trc file: "G:\usr\sap\SMD\J98\work\dev_SMDAgent", trc level: 1, release: "701"
    node name   : smdagent
    pid         : 1136
    system name : SMD
    system nr.  : 98
    started at  : Thu Jul 08 14:49:55 2010
    arguments       :
           arg[00] : G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
           arg[01] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
           arg[02] : -DSAPINFO=SMD_98_server
           arg[03] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
    JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SMD\J98\profile\smd.properties]
    -> ms host    :
    -> ms port    : 36
    -> OS libs    : G:\usr\sap\SMD\J98\..\exe
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : G:\usr\sap\SMD\J98\profile\smd.properties
    Instance properties
    -> ms host    :
    -> ms port    : 36
    -> os libs    : G:\usr\sap\SMD\J98\..\exe
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    Worker nodes
    -> [00] smdagent             : G:\usr\sap\SMD\J98\profile\smd.properties
    [Thr 5392] Thu Jul 08 14:49:55 2010
    [Thr 5392] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 5392] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 2068] JLaunchRequestFunc: Thread 2068 started as listener thread for np messages.
    [Thr 220] WaitSyncSemThread: Thread 220 started as semaphore monitor thread.
    [Thr 5392] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 5392] CPIC (version=701.2009.01.26)
    [Thr 5392] [Node: SMDAgent] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_26-x64\
    [Thr 5392] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SMD\J98\..\exe\jvmx.jar
    JStartupIReadSection: read node properties [smdagent]
    -> node name          : SMDAgent
    -> node type          : server
    -> node id            : 1
    -> node execute       : yes
    -> java path          : C:\j2sdk1.4.2_26-x64\
    -> java parameters    : -DP4ClassLoad=P4Connection
    -> java vm version    : 1.4.2_26-b03
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 256M
    -> init heap size     : 256M
    -> root path          : ..\SMDAgent
    -> class path         : lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
    -> OS libs path       : G:\usr\sap\SMD\J98\..\exe
    -> main class         : com.sap.smd.agent.launcher.SMDAgentLauncher
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : G:\usr\sap\SMD\J98\..\exe\jstartup.jar;G:\usr\sap\SMD\J98\..\exe\jvmx.jar
    -> shutdown class     : com.sap.smd.agent.launcher.SMDAgentLauncher
    -> parameters         : run jcontrol
    -> debuggable         : yes
    -> debug mode         : no
    -> debug port         : 58981
    -> shutdown timeout   : 20000
    [Thr 5392] JLaunchISetDebugMode: set debug mode [no]
    [Thr 2448] JLaunchIStartFunc: Thread 2448 started as Java VM thread.
    [Thr 2448] Thu Jul 08 14:49:56 2010
    [Thr 2448] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
         Java Parameters: -Xss2m
    JHVM_LoadJavaVM: VM Arguments of node [SMDAgent]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -DP4ClassLoad=P4Connection
    -> arg[  4]: -Dsys.global.dir=G:\usr\sap\SMD\SYS\global
    -> arg[  5]: -Dapplication.home=G:\usr\sap\SMD\J98\..\exe
    -> arg[  6]: -Djava.class.path=G:\usr\sap\SMD\J98\..\exe\jstartup.jar;G:\usr\sap\SMD\J98\..\exe\jvmx.jar;lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
    -> arg[  7]: -Djava.library.path=C:\j2sdk1.4.2_26-x64
    jre\bin\server;C:\j2sdk1.4.2_26-x64
    jre\bin;C:\j2sdk1.4.2_26-x64
    bin;G:\usr\sap\SMD\J98\..\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
    -> arg[  8]: -Dmemory.manager=256M
    -> arg[  9]: -Xmx256M
    -> arg[ 10]: -Xms256M
    -> arg[ 11]: -DLoadBalanceRestricted=no
    -> arg[ 12]: -Djstartup.mode=JCONTROL
    -> arg[ 13]: -Djstartup.ownProcessId=1136
    -> arg[ 14]: -Djstartup.ownHardwareId=H1630488451
    -> arg[ 15]: -Djstartup.whoami=server
    -> arg[ 16]: -Djstartup.debuggable=yes
    -> arg[ 17]: -Xss2m
    -> arg[ 18]: -DSAPINFO=SMD_98_server
    -> arg[ 19]: -DSAPSTARTUP=1
    -> arg[ 20]: -DSAPSYSTEM=98
    -> arg[ 21]: -DSAPSYSTEMNAME=SMD
    -> arg[ 22]: -DSAPMYNAME=SAPVSM01_SMD_98
    -> arg[ 23]: -DSAPDBHOST=
    -> arg[ 24]: -Dj2ee.dbhost=
    [Thr 2448] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [SMDAgent]
    -> arg[  0]: run
    -> arg[  1]: jcontrol
    [Thr 2448] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 2448] Thu Jul 08 14:49:57 2010
    [Thr 2448] JLaunchISetState: change state from [Initial (0)] to [Initial (0)]
    [Thr 2448] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 2448] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 3140] JLaunchIExitJava: exit hook is called (rc = -11112)
    [Thr 3140] **********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'
    for additional information and trouble shooting.
    [Thr 3140] JLaunchCloseProgram: good bye (exitcode = -11112)<br><br>
    LOG  dev_jcontrol<br><br>
    trc file: "G:\usr\sap\SMD\J98\work\dev_jcontrol", trc level: 1, release: "701"
    node name   : jcontrol
    pid         : 840
    system name : SMD
    system nr.  : 98
    started at  : Thu Jul 08 14:49:53 2010
    arguments       :
           arg[00] : G:\usr\sap\SMD\J98\..\exe\jcontrol.exe
           arg[01] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
    JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SMD\J98\profile\smd.properties]
    -> ms host    :
    -> ms port    : 36
    -> OS libs    : G:\usr\sap\SMD\exe
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : G:\usr\sap\SMD\J98\profile\smd.properties
    Instance properties
    -> ms host    :
    -> ms port    : 36
    -> os libs    : G:\usr\sap\SMD\exe
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    Worker nodes
    -> [00] smdagent             : G:\usr\sap\SMD\J98\profile\smd.properties
    [Thr 5968] Thu Jul 08 14:49:53 2010
    [Thr 5968] *** WARNING => Key profile parameters not set G:\usr\sap\SMD\J98\..\SYS\profile\DEFAULT.PFL:
    j2ee/scs/host=
    j2ee/scs/system= [jcntrxx.c    1459]
    [Thr 5968] *** WARNING => Can't open default profile [G:\usr\sap\SMD\J98\..\SYS\profile\DEFAULT.PFL] for migration [jcntrxx.c    1460]
    [Thr 5968] JControlExecuteBootstrap: jcontrol runs in 6.20 compatible mode
    [Thr 5968] JControlExecuteBootstrap: jcontrol runs in 6.20 compatible mode
    [Thr 5968] JControlIBuildProcessList: Maximum error count is set to 4
    [Thr 5968] [Node: SMDAgent] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_26-x64\
    [Thr 384] JControlRequestFunc: Thread 384 started as listener thread for np messages.
    [Thr 5968] Thu Jul 08 14:49:54 2010
    [Thr 5968] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SMD\exe\jvmx.jar
    JStartupIReadSection: read node properties [smdagent]
    -> node name          : SMDAgent
    -> node type          : server
    -> node id            : 1
    -> node execute       : yes
    -> java path          : C:\j2sdk1.4.2_26-x64\
    -> java parameters    : -DP4ClassLoad=P4Connection
    -> java vm version    : 1.4.2_26-b03
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 256M
    -> init heap size     : 256M
    -> root path          : ..\SMDAgent
    -> class path         : lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
    -> OS libs path       : G:\usr\sap\SMD\exe
    -> main class         : com.sap.smd.agent.launcher.SMDAgentLauncher
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : G:\usr\sap\SMD\exe\jstartup.jar;G:\usr\sap\SMD\exe\jvmx.jar
    -> shutdown class     : com.sap.smd.agent.launcher.SMDAgentLauncher
    -> parameters         : run jcontrol
    -> debuggable         : yes
    -> debug mode         : no
    -> debug port         : 58981
    -> shutdown timeout   : 20000
    [Thr 5968] JControlConnectToMS: jcontrol runs in 6.20 compatible mode without message server
    JControlStartJLaunch: program = G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
    -> arg[00] = G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
    -> arg[01] = pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
    -> arg[02] = -DSAPINFO=SMD_98_server
    -> arg[03] = -nodeId=0
    -> arg[04] = -file=G:\usr\sap\SMD\J98\profile\smd.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_840
    -> arg[06] = -nodeName=smdagent
    -> arg[07] = -jvmOutFile=G:\usr\sap\SMD\J98\work\jvm_SMDAgent.out
    -> arg[08] = -stdOutFile=G:\usr\sap\SMD\J98\work\std_SMDAgent.out
    -> arg[09] = -locOutFile=G:\usr\sap\SMD\J98\work\dev_SMDAgent
    -> arg[10] = -mode=JCONTROL
    -> arg[11] = pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
    -> lib path = PATH=C:\j2sdk1.4.2_26-x64
    jre\bin\server;C:\j2sdk1.4.2_26-x64
    jre\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
    -> exe path = PATH=C:\j2sdk1.4.2_26-x64
    bin;G:\usr\sap\SMD\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
    [Thr 5968] JControlICheckProcessList: process SMDAgent started (PID:1136)
    [Thr 5968] Thu Jul 08 14:49:59 2010
    [Thr 5968] JControlICheckProcessList: process SMDAgent (pid:1136) died (RUN-FLAG)
    [Thr 5968] JControlIResetProcess: reset process SMDAgent
    [Thr 5968] JControlIResetProcess: [SMDAgent] not running -> increase error count (1)
    [Thr 5968] JControlICheckProcessList: shutdown node from console -> restart off
    THANKS FOR RESPONSE

    Hi Martin,
    Check note 940893 (If this is not done already )
    Regards
    Tobias

  • Problems with ps elements 10 on imac

    hi,
    i just downloaded the programm yesterday from the app store onto my imac. i want to use it as an extention to my aperture 3.
    I have the following questions/problems:
    + starting the programm takes at least 2 minutes, is this normal? I use an Imac Quadcore I7 with 12 gb onboard
    + the preferences: i can only extend the used memory up to 3gb, although i have 12 gb on board?
    + I can not store the preferences, when I shut the programm down, it tells me I do not have the legitimation to store the preferences?!
    + panorama foto work is mostly running out of memory?! 12gb on board
    Please can anybody help me?
    Thanks
    mikle

    No, it does not work on the other account. Problem is still/again the same. In the new account it works perfekt.
    Von meinem iPad gesendet
    Am 08.01.2012 um 22:16 schrieb "Barbara B." <[email protected]>:
    Re: problems with ps elements 10 on imac
    created by Barbara B. in Photoshop Elements - View the full discussion
    If it works in the new account it should hopefully work in your other account, so just log out of that one and go back to the old one and see if it does.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4125222#4125222
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4125222#4125222. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I have problem with starting up my Mac Pro ?

    Dear ,
    I'have a problem with starting up my Mac Pro , please advice me how to start it

    This may help.
    http://support.apple.com/kb/TS1365
    Note: Steps 5 and 6
    Step 5
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Y have problems with Photoshop Elements 12  Bug after reinstallation complet  Impossible working ??

    Morning !
    We have many problems with PHOTOSHOP ELEMENTS 12 ?
    After installation on MAC OS X   YOSEMITE  .
    S O S !!

    Exporter vers photoshop do you receive any specific error messages?  In what way is Photoshop Elements 12 not working?

  • Problem with premiere elements 4.0

    i am having
    problem
    with premiere elements 4.0. it keeps on crashing and when i put pictures on the timeline it comes up black. when i try to preview it either it shows black or sometimes the picture but i cant see it to delete if i wanted to. also it gave me a message something like that adbe is running low on memory and i should be caution

    This is aimed at Premiere Pro, but may help
    Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

  • Report viewer "Go To Next Page" button always load Page2 with Crystal Reports Runtime version 10.0.10. No problem with Crystal Reports Runtime version 10.0.5

    Report viewer "Go To Next Page" button always load Page2 with Crystal Reports Runtime version 10.0.10. No problem with Crystal Reports Runtime version 10.0.5.
    NOTE: I did not check other Crystal Runtime versions.
    Any solution?

    Visual Studio Premium 2012.
    It is a web application.
    It was working fine with Crystal Report version 13.0.5. Only change is uninstall Crystal Report version 13.0.5 and install Crystal Report version 13.0.10
    Entering page number works fine to view that page Request.Form parameters sample for that (change page from page 3 to page 5):
    __CRYSTALSTATEviewer:{"0":{"rptViewLabel":"Ana Rapor", "gpTreeCurrentExpandedPaths":{}, "vCtxt":"/wEXAwUVSXNMYXN0UGFnZU51bWJlcktub3duZwUOTGFzdFBhZ2VOdW1iZXICBQUKUGFnZU51bWJlcgIC", "pageNum":2}, "common":{"width":"100%", "Height":"100%", "enableDrillDown":true, "drillDownTarget":"_self", "printMode":"Pdf", "displayToolbar":true, "pageToTreeRatio":6, "pdfOCP":true, "promptingType":"html", "viewerState":"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", "rptAlbumOrder":["0"], "toolPanelType":"GroupTree", "toolPanelWidth":200, "toolPanelWidthUnit":"px", "iactParams":[{"paramName":"pFromDate", "description":"From Date", "valueDataType":"d", "value":[{"d":9, "m":4, "y":2014, "h":0, "min":0, "s":0, "ms":0}], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pToDate", "description":"To Date", "valueDataType":"d", "value":[{"d":9, "m":6, "y":2014, "h":0, "min":0, "s":0, "ms":0}], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pGroupBy", "description":"Group by", "valueDataType":"n", "value":[2], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"Boardtype"}, {"value":2, "desc":"Room type"}, {"value":3, "desc":"Rate Room type"}, {"value":4, "desc":"Rate code"}, {"value":5, "desc":"Guarantee code"}, {"value":6, "desc":"Adults"}, {"value":7, "desc":"Children"}, {"value":8, "desc":"Market code"}, {"value":9, "desc":"Source code"}, {"value":10, "desc":"Channel code"}, {"value":11, "desc":"Country"}, {"value":12, "desc":"Nationality"}, {"value":13, "desc":"Created by"}, {"value":14, "desc":"Adult+Child"}, {"value":15, "desc":"Agency"}, {"value":16, "desc":"Company"}, {"value":17, "desc":"Source"}, {"value":18, "desc":"Group"}, {"value":19, "desc":"Micros Discount"}, {"value":-1, "desc":"None"}], "defaultDisplayType":1}, {"paramName":"pDistributionBy", "description":"Distribution by", "valueDataType":"n", "value":[1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"RN"}, {"value":2, "desc":"ARR"}], "defaultDisplayType":1}, {"paramName":"pShowDetails", "description":"Show details", "valueDataType":"b", "value":[true], "allowCustomValue":false, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":true}, {"value":false}], "defaultDisplayType":1}, {"paramName":"pSubGroupBy", "description":"Sub Group", "valueDataType":"n", "value":[-1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"Boardtype"}, {"value":2, "desc":"Room type"}, {"value":3, "desc":"Rate Room type"}, {"value":4, "desc":"Rate code"}, {"value":5, "desc":"Guarantee code"}, {"value":6, "desc":"Adults"}, {"value":7, "desc":"Children"}, {"value":8, "desc":"Market code"}, {"value":9, "desc":"Source code"}, {"value":10, "desc":"Channel code"}, {"value":11, "desc":"Country"}, {"value":12, "desc":"Nationality"}, {"value":13, "desc":"Created by"}, {"value":14, "desc":"Adult+Child"}, {"value":15, "desc":"Agency"}, {"value":16, "desc":"Company"}, {"value":17, "desc":"Source"}, {"value":18, "desc":"Group"}, {"value":19, "desc":"Micros Discount"}, {"value":-1, "desc":"None"}], "defaultDisplayType":1}, {"paramName":"pIncludeDayUse", "description":"Include Day Use", "valueDataType":"b", "value":[true], "allowCustomValue":false, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":true}, {"value":false}], "defaultDisplayType":1}, {"paramName":"pDateType", "description":"Date Type", "valueDataType":"n", "value":[1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pCompHuse", "description":"Comp-Huse", "valueDataType":"n", "value":[0, 1, 2], "allowCustomValue":true, "allowMultiValue":true, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pOrderBy", "description":"Order By", "valueDataType":"n", "value":[2], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}], "paramOpts":{"numberFormat":{"groupSeperator":".", "decimalSeperator":","}, "dateFormat":"d.M.yyyy", "timeFormat":"H:mm:ss", "dateTimeFormat":"d.M.yyyy H:mm:ss", "booleanFormat":{"true":"True", "false":"False"}, "maxNumParameterDefaultValues":"200", "canOpenAdvancedDialog":true}, "zoom":100, "zoomFromUI":false, "lastRefresh":"9.7.2014 17:47:04"}, "curViewId":"0"}
    viewer_toptoolbar_search_textField:Bul...
    text_viewer_toptoolbar_selectPg:5
    text_viewer_toptoolbar_zoom:100%
    __CALLBACKID:viewer
    __CALLBACKPARAM:{"tb":"gototext", "text":"5"}
    Try to view New Page does not work. Request.Form parameters sample for that (try change page from page 2 to page 3):
    __CRYSTALSTATEviewer:{"0":{"rptViewLabel":"Ana Rapor", "gpTreeCurrentExpandedPaths":{}, "vCtxt":"/wEXAwUVSXNMYXN0UGFnZU51bWJlcktub3duZwUOTGFzdFBhZ2VOdW1iZXICBQUKUGFnZU51bWJlcgIC", "pageNum":2}, "common":{"width":"100%", "Height":"100%", "enableDrillDown":true, "drillDownTarget":"_self", "printMode":"Pdf", "displayToolbar":true, "pageToTreeRatio":6, "pdfOCP":true, "promptingType":"html", "viewerState":"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", "rptAlbumOrder":["0"], "toolPanelType":"GroupTree", "toolPanelWidth":200, "toolPanelWidthUnit":"px", "iactParams":[{"paramName":"pFromDate", "description":"From Date", "valueDataType":"d", "value":[{"d":9, "m":4, "y":2014, "h":0, "min":0, "s":0, "ms":0}], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pToDate", "description":"To Date", "valueDataType":"d", "value":[{"d":9, "m":6, "y":2014, "h":0, "min":0, "s":0, "ms":0}], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pGroupBy", "description":"Group by", "valueDataType":"n", "value":[2], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"Boardtype"}, {"value":2, "desc":"Room type"}, {"value":3, "desc":"Rate Room type"}, {"value":4, "desc":"Rate code"}, {"value":5, "desc":"Guarantee code"}, {"value":6, "desc":"Adults"}, {"value":7, "desc":"Children"}, {"value":8, "desc":"Market code"}, {"value":9, "desc":"Source code"}, {"value":10, "desc":"Channel code"}, {"value":11, "desc":"Country"}, {"value":12, "desc":"Nationality"}, {"value":13, "desc":"Created by"}, {"value":14, "desc":"Adult+Child"}, {"value":15, "desc":"Agency"}, {"value":16, "desc":"Company"}, {"value":17, "desc":"Source"}, {"value":18, "desc":"Group"}, {"value":19, "desc":"Micros Discount"}, {"value":-1, "desc":"None"}], "defaultDisplayType":1}, {"paramName":"pDistributionBy", "description":"Distribution by", "valueDataType":"n", "value":[1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"RN"}, {"value":2, "desc":"ARR"}], "defaultDisplayType":1}, {"paramName":"pShowDetails", "description":"Show details", "valueDataType":"b", "value":[true], "allowCustomValue":false, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":true}, {"value":false}], "defaultDisplayType":1}, {"paramName":"pSubGroupBy", "description":"Sub Group", "valueDataType":"n", "value":[-1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"Boardtype"}, {"value":2, "desc":"Room type"}, {"value":3, "desc":"Rate Room type"}, {"value":4, "desc":"Rate code"}, {"value":5, "desc":"Guarantee code"}, {"value":6, "desc":"Adults"}, {"value":7, "desc":"Children"}, {"value":8, "desc":"Market code"}, {"value":9, "desc":"Source code"}, {"value":10, "desc":"Channel code"}, {"value":11, "desc":"Country"}, {"value":12, "desc":"Nationality"}, {"value":13, "desc":"Created by"}, {"value":14, "desc":"Adult+Child"}, {"value":15, "desc":"Agency"}, {"value":16, "desc":"Company"}, {"value":17, "desc":"Source"}, {"value":18, "desc":"Group"}, {"value":19, "desc":"Micros Discount"}, {"value":-1, "desc":"None"}], "defaultDisplayType":1}, {"paramName":"pIncludeDayUse", "description":"Include Day Use", "valueDataType":"b", "value":[true], "allowCustomValue":false, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":true}, {"value":false}], "defaultDisplayType":1}, {"paramName":"pDateType", "description":"Date Type", "valueDataType":"n", "value":[1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pCompHuse", "description":"Comp-Huse", "valueDataType":"n", "value":[0, 1, 2], "allowCustomValue":true, "allowMultiValue":true, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pOrderBy", "description":"Order By", "valueDataType":"n", "value":[2], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}], "paramOpts":{"numberFormat":{"groupSeperator":".", "decimalSeperator":","}, "dateFormat":"d.M.yyyy", "timeFormat":"H:mm:ss", "dateTimeFormat":"d.M.yyyy H:mm:ss", "booleanFormat":{"true":"True", "false":"False"}, "maxNumParameterDefaultValues":"200", "canOpenAdvancedDialog":true}, "zoom":100, "zoomFromUI":false, "lastRefresh":"9.7.2014 17:47:04"}, "curViewId":"0"}
    viewer_toptoolbar_search_textField:Bul...
    text_viewer_toptoolbar_selectPg:2 / 5
    text_viewer_toptoolbar_zoom:100%
    __CALLBACKID:viewer
    __CALLBACKPARAM:{"tb":"next"}

  • JDeveloper Extension Problem with Navigator Elements

    Hi,
    I have a problem with the elements of the JDev Navigator.
    At IDE startup I want to set an overlay for the elements on the active project.
    This function is implemented in the Subversion Extension too.
    How can I access the elements of an active project in the navigator?
    It is not a problem to set an overlay with the ContextMenuListener.
    Thank you for your help.
    Greetings,
    Benjamin Oelenberg

    Please take a look at the Extension SDK sample projects. There is a sample that does exactly this.
    Install the Extension SDK from the Help --> Check for Updates dialog and after restart, say yes to installing the sample projects.

  • Problem with starting Windows when W510 in docking station

    When I put in my W510 to the docking station, I have usually every second day problems with starting up Windows operation system.
    I make 2 videos, where on the first 100_1060.MOV you can see starting Windows when it is frozen (first 1 minute record, I start record after about 3 minutes frozen), then I have to reboot W510 by on/off button and start ThinkVantage.
    On the second video 100_1061.MOV is starting operating system after ThinkVantage process, this start is OK.
    http://www.licko.cz/w510/100_1060.MOV
    http://www.licko.cz/w510/100_1061.MOV
    Why I have this problems? I have latest Windows and W510 updates.
    Regards,
      Lubomir Licko
    Solved!
    Go to Solution.

    There was some upgrades of Microsoft and Lenovo and I don't have this problem long time.

  • Problem with starting more than one SwingWorker

    Hello
    I wonder if anyone could tell me if there are known problems with starting more than one SwingWorker thread at once?
    In response to an action the user performs, I need to obtain several lists of things from the server. This includes a couple of server-calls, and I want to do the server calls in a thread outside the awt-event thread. So I start a couple of SwingWorker-threads. This works fine sometimes, but not always. Sometimes code in some of the SwingWorkers finished method does not update the ui. I can see that the correct calls are made, but the ui is still not updated correctly. The problem seems to be related to the sequence of when the different thread are finished. For instance, if the sequence is like this:
    SwingWorker1.construct
    SwingWorker2.construct
    SwingWorker1.finished
    SwingWorker2.finished
    Things go fine, but if the sequence is:
    SwingWorker1.construct
    SwingWorker1.finished
    SwingWorker2.construct
    SwingWorker2.finished
    the ui-updates in SwingWorker1.finished is not done correctly.
    Can anyone help me with this?

    This is the point:
    In one SwingWorker thread you have 1 construct method, and 1 finish method - which are both invoked once.
    Therefore you only have one opportunity to update the gui in that thread. This forces you to use many threads if you want regular updates, which I try to avoid.
    Therefore, the solution!
    Have a loop in the construct method that executes the algorithm accordingly, updating the gui accordingly at regular times, maintaining just the 1 thread - becomes easier and nicer for the programmer and the JVM.
    The finish method in this case is to update the gui when all iterations are finished.
    There is nothing wrong with this. Just because you have a finish method that is called in the event-dispatching thread doesn't mean that all your update code must be in there.
    What you MUST ensure is that ALL your update code is executed in the event-dispatching thread, that is the most important thing. After all, SwingWorker is just a helper class, not the gospel template of how to update a gui.

Maybe you are looking for

  • Not a valid photoshop document after time machine recovery and reinstall of photoshop

    After a time machine recovery most of my photoshop documents recovered fine, however there are a select few (and my most recent work unfortuantely) that seem corrupt. It isn't all of my documents. Trying to recover them again from back-up doesn't see

  • KA780G second network card doesn't work

    Hi everybody, Today, I put an second network card on the KA780G board (it's for a round robin network), on a free PCI slot, and this card isn't recognised by Linux and Windows  (in Windows XP, when the network card is connected, my graphical card wor

  • InDesign Application Not Responding

    I multitask a lot, but lately when I work on another application and return back to InDesign it says the application isn't responding. I'm using CS5.5 on my Mac running Mac OS X. Illustrator also does this to me, but not as often.

  • Lightning 8pin to 30pin adaptor for Iphone 6 Issues?

    When i connect to my car or ihome radio for 30pin dock the connector causes my phone to permanently show volume icon on screen. Is anyone having this issue? It only goes away if I turn the phone completely off and restart it. It does not happen every

  • IMovie 08, Sony HD camcorder and a Power PC G5

    I'm considering buying an HD Sony camcorder. My husband insists on the HD. I've got a powerpc G5, 2.0 Ghz, 1Gb Ram, and iMovie 08. Which camcorder should we choose? I keep hearing negative things about the HDR-SR5 and models like it when trying to do