Problems with starting jstart.EXE (help for/from anyone needed!)

Dear all,
the last days I have spent some time trying to install CE7.1 and also CE711 EHP1. The installation itself worked great: no errors were reported during intallation. But somehow the instance CE1 never starts up completely. As I have found out, and so do many many many others, the problem lies in starting "jstart.EXE" (Please check your SAP Management Console: CE1 => matrix 0 => Process List).
The following behaviours I have monitored:
1. When trying to start the CE1 instance jstart.EXE tries to start but stops after a while. So the J2EE Server is not started. This behaviour is monitored and reported by many posts here at SDN, but it seems that "final" solution has been posted, which is valid for anyone. At least non of the hints could help me.
2. I have monitored that the status of jstart.EXE seems to hang at status "Starting the processes" (I have waited more than 25 minutes).
To all the experienced and anyone else:
PLEASE post all you hints here! This issues seems to be a very common issue and is not really solved. Other posts did not help me so far.
In my case (case 2 from above) I can provide the following information:
Today (December 3rd, 2008) I have installed CE7.1_SR5. Hardware requirements are fullfilled by 100%.
I have to mention that I have installed some old CE or NW J2EE version on the same system like about one year ago, and I uninstalled it after only one week.
Maybe what the jstart.EXE problems are somehow related to the license: does the "uninstallation" leave some data back in the system, which could be used by later installs in order to check the license (wich is only a 90 day license)?
Who can help?
What is your experience with jstart.EXE?
Any help is very welcome. I am sure not only for me!
Thanks,
Pars

Hi,
OK, if jstart in the "Process List" has status status "Starting processes" I guess what you have to monitor is the "AS Java Process Table". It should show which processes are being started at the moment.
If I remember correctly the first in this list are offline deployment/bootstrap (which need to run to prepare the instance after updates). After that two processes should be started: the icm and server0 (if you have created more nodes there might be more serverX processes).
So which one really fails? If it runs for long time and then goes down I suspect it might be server0 (that's the actual java server process). In this case you'll want to check for errors in <drive>/usr/sap/<SID>/JXX/work/_server0. files or the default trace.
Another way to determine what goes wrong might be to check the <drive>/usr/sap/<SID>/JXX/work directory. If you sort traces by date you'll probably get some idea. dev_<process> are the jstart output, the std_<process> is the actual stdout of the process, if the process failed probably the std file contains some more information on why it happened.
If you cannot find the problem is there a way to share the last files from the work directory. If it's a common problem we must identify and add it to the TS guide ...
Best regards, dido

Similar Messages

Problem with start up. please help.

hi. i have recently had trouble with my powerbook g4 in that it wont startup. it goes to the main blue screen and wont go any further. i ran a couple of things and it worked again then it froze after a while and did the same thing. i have run the disk utility as it says in the support page but it has only been able to repair one of the two volumes it tried to repair. it says that 1 volume could not be repaired.
it still will not start up but now comes up with the loading page saying "starting mac os x" but goes no further. how can this be fixed?
any help would be greatly appreciated.
thank you

1. You wrote: " i have been told by someone that there is an option when reinstalling os x to keep the files on the drive. if i was to do this without having to purchase a third party disc utility program would this help>?"You've obviously asked someone who either:• Was not given a full description of the problem by you.
• Doesn't know the first thing about Mac OS X and should not be giving advice.The option is an Installation option called "Archive and Install." However, you already have a corrupted drive directory, meaning anything you write to the drive via Archive and Install could potentially overwrite real data. So, you might be able to reinstall the OS via Archive and Install but then find that:
• You can't log in to your account.
• Your e-mail, pictures, music, etc. — or many items therein — are corrupted, missing, or gone.
Performing an Archive and Install on a corrupted drive won't fix the drive corruption and carries a high risk that your personal data may be damaged or lost. The Archive and Install itself may fail.
One should never perform an Archive and Install on a corrupted drive and check that the drive is free of directory corruption before proceeding with an Archive and Install: see Step 2 of the Procedure specified in my "General advice on performing an Archive and Install" FAQ.
2. You wrote: "sorry to keep asking"I am too. I've advised you as to what you need to do, and the potential risks associated with such. It's up to you now to make a decision and move forward. If you don't trust my advice, then you're free to make that choice. I've done all I can for you.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S.

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.

Was it purchased from an official Apple Store, not a reseller? Only Apple Stores sell official factory unlocked phones. The others sell hacked to unlock phones, and the unlocking is unstable.
Try these steps, as needed:
1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
2. Settings > General > Reset > Reset Network Settings.
3. Replace SIM card (and reset network settings again)
4. Restore Phone in iTunes using a backup
5. Restore in iTunes as new, without using a backup

When I try and restore from iCloud it says problem with back up data help !!!

Can anyone help me back up my phone from iCloud. It is saying there is a problem with my data

Hey Shopaholic1181,
Thanks for using Apple Support Communities.
iCloud: Understanding alert messages when restoring from an iCloud Backup
http://support.apple.com/kb/TS4585
"Your iPhone cannot be restored because there is a problem with your backup data. Choose a different backup to restore from."
Your backup does not appear to be usable. If you receive this alert, you should check the iCloud System Status at the iCloud Support website to make sure there are not any issues occurring with iCloud Backup. If there is not a widespread issue notated on the iCloud System Status, the error may self-resolve if you wait several minutes and try again. If issues persist, you should contact iCloud Support via the iCloud Support website.
Have a nice day,
Mario

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

I think that may be a consequence of the email provider she is using. Some services (AOL is one example) inspect and modify email attachments, particularly photos, resulting in reduced resolution compared to the email that was sent.
The iPod does not do this. The resolution of the picture in the email she receives will be identical to what is imported.

I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

Online Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

SOLMAN 7.0 EHP1 problem with starting SMD instance

Hello everyone, 
i have problem with starting instance SMD in my Solution Manager. After START this instance is status for one-two secend green and then status go to yellow color in SAP Management Console. I dont now where is problem, i try everything, can you help me? 
Here is LOG from dev_SMDAgent 
trc file: "G:\usr\sap\SMD\J98\work\dev_SMDAgent", trc level: 1, release: "701"
node name : smdagent
pid : 1136
system name : SMD
system nr. : 98
started at : Thu Jul 08 14:49:55 2010
arguments :
 arg[00] : G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
 arg[01] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
 arg[02] : -DSAPINFO=SMD_98_server
 arg[03] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SMD\J98\profile\smd.properties]
-> ms host :
-> ms port : 36
-> OS libs : G:\usr\sap\SMD\J98\..\exe
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SMD\J98\profile\smd.properties
Instance properties
-> ms host :
-> ms port : 36
-> os libs : G:\usr\sap\SMD\J98\..\exe
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
Worker nodes
-> [00] smdagent : G:\usr\sap\SMD\J98\profile\smd.properties
[Thr 5392] Thu Jul 08 14:49:55 2010
[Thr 5392] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 5392] JLaunchRequestQueueInit: create pipe listener thread
[Thr 2068] JLaunchRequestFunc: Thread 2068 started as listener thread for np messages.
[Thr 220] WaitSyncSemThread: Thread 220 started as semaphore monitor thread.
[Thr 5392] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 5392] CPIC (version=701.2009.01.26)
[Thr 5392] [Node: SMDAgent] java home is set by profile parameter
 Java Home: C:\j2sdk1.4.2_26-x64\
[Thr 5392] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SMD\J98\..\exe\jvmx.jar
JStartupIReadSection: read node properties [smdagent]
-> node name : SMDAgent
-> node type : server
-> node id : 1
-> node execute : yes
-> java path : C:\j2sdk1.4.2_26-x64\
-> java parameters : -DP4ClassLoad=P4Connection
-> java vm version : 1.4.2_26-b03
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 256M
-> init heap size : 256M
-> root path : ..\SMDAgent
-> class path : lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> OS libs path : G:\usr\sap\SMD\J98\..\exe
-> main class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SMD\J98\..\exe\jstartup.jar;G:\usr\sap\SMD\J98\..\exe\jvmx.jar
-> shutdown class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> parameters : run jcontrol
-> debuggable : yes
-> debug mode : no
-> debug port : 58981
-> shutdown timeout : 20000
[Thr 5392] JLaunchISetDebugMode: set debug mode [no]
[Thr 2448] JLaunchIStartFunc: Thread 2448 started as Java VM thread.
[Thr 2448] Thu Jul 08 14:49:56 2010
[Thr 2448] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
 Java Parameters: -Xss2m
JHVM_LoadJavaVM: VM Arguments of node [SMDAgent]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -DP4ClassLoad=P4Connection
-> arg[ 4]: -Dsys.global.dir=G:\usr\sap\SMD\SYS\global
-> arg[ 5]: -Dapplication.home=G:\usr\sap\SMD\J98\..\exe
-> arg[ 6]: -Djava.class.path=G:\usr\sap\SMD\J98\..\exe\jstartup.jar;G:\usr\sap\SMD\J98\..\exe\jvmx.jar;lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> arg[ 7]: -Djava.library.path=C:\j2sdk1.4.2_26-x64
jre\bin\server;C:\j2sdk1.4.2_26-x64
jre\bin;C:\j2sdk1.4.2_26-x64
bin;G:\usr\sap\SMD\J98\..\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
-> arg[ 8]: -Dmemory.manager=256M
-> arg[ 9]: -Xmx256M
-> arg[ 10]: -Xms256M
-> arg[ 11]: -DLoadBalanceRestricted=no
-> arg[ 12]: -Djstartup.mode=JCONTROL
-> arg[ 13]: -Djstartup.ownProcessId=1136
-> arg[ 14]: -Djstartup.ownHardwareId=H1630488451
-> arg[ 15]: -Djstartup.whoami=server
-> arg[ 16]: -Djstartup.debuggable=yes
-> arg[ 17]: -Xss2m
-> arg[ 18]: -DSAPINFO=SMD_98_server
-> arg[ 19]: -DSAPSTARTUP=1
-> arg[ 20]: -DSAPSYSTEM=98
-> arg[ 21]: -DSAPSYSTEMNAME=SMD
-> arg[ 22]: -DSAPMYNAME=SAPVSM01_SMD_98
-> arg[ 23]: -DSAPDBHOST=
-> arg[ 24]: -Dj2ee.dbhost=
[Thr 2448] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [SMDAgent]
-> arg[ 0]: run
-> arg[ 1]: jcontrol
[Thr 2448] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 2448] Thu Jul 08 14:49:57 2010
[Thr 2448] JLaunchISetState: change state from [Initial (0)] to [Initial (0)]
[Thr 2448] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 2448] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 3140] JLaunchIExitJava: exit hook is called (rc = -11112)
[Thr 3140] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 3140] JLaunchCloseProgram: good bye (exitcode = -11112) 
LOG dev_jcontrol 
trc file: "G:\usr\sap\SMD\J98\work\dev_jcontrol", trc level: 1, release: "701"
node name : jcontrol
pid : 840
system name : SMD
system nr. : 98
started at : Thu Jul 08 14:49:53 2010
arguments :
 arg[00] : G:\usr\sap\SMD\J98\..\exe\jcontrol.exe
 arg[01] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SMD\J98\profile\smd.properties]
-> ms host :
-> ms port : 36
-> OS libs : G:\usr\sap\SMD\exe
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SMD\J98\profile\smd.properties
Instance properties
-> ms host :
-> ms port : 36
-> os libs : G:\usr\sap\SMD\exe
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
Worker nodes
-> [00] smdagent : G:\usr\sap\SMD\J98\profile\smd.properties
[Thr 5968] Thu Jul 08 14:49:53 2010
[Thr 5968] *** WARNING => Key profile parameters not set G:\usr\sap\SMD\J98\..\SYS\profile\DEFAULT.PFL:
j2ee/scs/host=
j2ee/scs/system= [jcntrxx.c 1459]
[Thr 5968] *** WARNING => Can't open default profile [G:\usr\sap\SMD\J98\..\SYS\profile\DEFAULT.PFL] for migration [jcntrxx.c 1460]
[Thr 5968] JControlExecuteBootstrap: jcontrol runs in 6.20 compatible mode
[Thr 5968] JControlExecuteBootstrap: jcontrol runs in 6.20 compatible mode
[Thr 5968] JControlIBuildProcessList: Maximum error count is set to 4
[Thr 5968] [Node: SMDAgent] java home is set by profile parameter
 Java Home: C:\j2sdk1.4.2_26-x64\
[Thr 384] JControlRequestFunc: Thread 384 started as listener thread for np messages.
[Thr 5968] Thu Jul 08 14:49:54 2010
[Thr 5968] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SMD\exe\jvmx.jar
JStartupIReadSection: read node properties [smdagent]
-> node name : SMDAgent
-> node type : server
-> node id : 1
-> node execute : yes
-> java path : C:\j2sdk1.4.2_26-x64\
-> java parameters : -DP4ClassLoad=P4Connection
-> java vm version : 1.4.2_26-b03
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 256M
-> init heap size : 256M
-> root path : ..\SMDAgent
-> class path : lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> OS libs path : G:\usr\sap\SMD\exe
-> main class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SMD\exe\jstartup.jar;G:\usr\sap\SMD\exe\jvmx.jar
-> shutdown class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> parameters : run jcontrol
-> debuggable : yes
-> debug mode : no
-> debug port : 58981
-> shutdown timeout : 20000
[Thr 5968] JControlConnectToMS: jcontrol runs in 6.20 compatible mode without message server
JControlStartJLaunch: program = G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
-> arg[00] = G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
-> arg[01] = pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
-> arg[02] = -DSAPINFO=SMD_98_server
-> arg[03] = -nodeId=0
-> arg[04] = -file=G:\usr\sap\SMD\J98\profile\smd.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_840
-> arg[06] = -nodeName=smdagent
-> arg[07] = -jvmOutFile=G:\usr\sap\SMD\J98\work\jvm_SMDAgent.out
-> arg[08] = -stdOutFile=G:\usr\sap\SMD\J98\work\std_SMDAgent.out
-> arg[09] = -locOutFile=G:\usr\sap\SMD\J98\work\dev_SMDAgent
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
-> lib path = PATH=C:\j2sdk1.4.2_26-x64
jre\bin\server;C:\j2sdk1.4.2_26-x64
jre\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
-> exe path = PATH=C:\j2sdk1.4.2_26-x64
bin;G:\usr\sap\SMD\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
[Thr 5968] JControlICheckProcessList: process SMDAgent started (PID:1136)
[Thr 5968] Thu Jul 08 14:49:59 2010
[Thr 5968] JControlICheckProcessList: process SMDAgent (pid:1136) died (RUN-FLAG)
[Thr 5968] JControlIResetProcess: reset process SMDAgent
[Thr 5968] JControlIResetProcess: [SMDAgent] not running -> increase error count (1)
[Thr 5968] JControlICheckProcessList: shutdown node from console -> restart off
THANKS FOR RESPONSE

Hi Martin,
Check note 940893 (If this is not done already )
Regards
Tobias

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...what should I do?

Hi Arika,
The drivers that you need to install to make your executable work depends on what your executable is doing. To get started, you need to have the LabVIEW Run-Time Engine installed on your target machine (the Win2000 machine you are planning to use) in order to run your executable. Next, you need to determine what drivers your executable uses, if any. For example, if you are using GPIB instrument control, you will need to install the NI-488 drivers on your target machine. If you are performing data acquisition, you will need to install NI-DAQ drivers. If you are doing image acquistion, you will need to install NI-IMAQ drivers.
All these drivers are available for downloading on ni.com. To get the drivers, go to ht
tp://www.ni.com/support , click on the link that takes you to Drivers and Updates (under Option 3), and click on the links to get to the driver(s) you need. For example, if you need the LabVIEW 5.1.1 Run-Time engine, click on the All Drivers and Updates by Application link on the main page (http://www.ni.com/softlib.nsf/). Then click on the LabVIEW link, Windows 2000, Run Time Engine, and then you will see the link to get to the page to download the LabVIEW 5.1.1 Run-Time Engine.
I hope this information helps.
Best Regards,
Wilbur Shen
National Instruments

Problem with starting more than one SwingWorker

Hello
I wonder if anyone could tell me if there are known problems with starting more than one SwingWorker thread at once?
In response to an action the user performs, I need to obtain several lists of things from the server. This includes a couple of server-calls, and I want to do the server calls in a thread outside the awt-event thread. So I start a couple of SwingWorker-threads. This works fine sometimes, but not always. Sometimes code in some of the SwingWorkers finished method does not update the ui. I can see that the correct calls are made, but the ui is still not updated correctly. The problem seems to be related to the sequence of when the different thread are finished. For instance, if the sequence is like this:
SwingWorker1.construct
SwingWorker2.construct
SwingWorker1.finished
SwingWorker2.finished
Things go fine, but if the sequence is:
SwingWorker1.construct
SwingWorker1.finished
SwingWorker2.construct
SwingWorker2.finished
the ui-updates in SwingWorker1.finished is not done correctly.
Can anyone help me with this?

This is the point:
In one SwingWorker thread you have 1 construct method, and 1 finish method - which are both invoked once.
Therefore you only have one opportunity to update the gui in that thread. This forces you to use many threads if you want regular updates, which I try to avoid.
Therefore, the solution!
Have a loop in the construct method that executes the algorithm accordingly, updating the gui accordingly at regular times, maintaining just the 1 thread - becomes easier and nicer for the programmer and the JVM.
The finish method in this case is to update the gui when all iterations are finished.
There is nothing wrong with this. Just because you have a finish method that is called in the event-dispatching thread doesn't mean that all your update code must be in there.
What you MUST ensure is that ALL your update code is executed in the event-dispatching thread, that is the most important thing. After all, SwingWorker is just a helper class, not the gospel template of how to update a gui.

Problem with starting/stopping OPMN

Hi there,
i have an problem with starting and stopping the opmn. When i try to start/stop/reload the opm i get this error:
opmnctl: opmn is not running
root@klart1:/opt/oracle/product/aserver/opmn/bin>./opmnctl shutdown
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
Kommunikationsfehler beim lokalen Port f� den OPMN-Server.
Weitere Informationen hierzu finden Sie in den OPMN-Log-Dateien
opmnctl: opmn is not running
in english this means:
Communication error at the local port for OPMN-Server.
More Information about this error, see OPMN-Log-Files.
opmnctl: opmn is not running
here is a summary from the opmn.xml file:
</module-data>
<start timeout="600" retry="2"/>
<stop timeout="120"/>
<restart timeout="720" retry="2"/>
<port id="ajp" range="12501-12600"/>
<port id="rmi" range="12401-12500"/>
<port id="jms" range="12601-12700"/>
<process-set id="default_island" numprocs="1"/>
</process-type>
<process-type id="OC4J_BI_Forms" module-id="OC4J">
<environment>
<variable id="DISPLAY" value="localhost:0"/>
<variable id="LD_LIBRARY_PATH" value="/opt/oracle/product/aserver/lib:/opt/oracle/product/aserver/network/lib:/opt/oracle/product/aserver/lib:/tmp/OraInstall2006-09-29_10-07-21AM/jre/1.4.2/lib/i386/client:/tmp/OraInstall2006-09-29_10-07-21AM/jre/1.4.2/lib/i386:/tmp/OraInstall2006-09-29_10-07-21AM/jre/1.4.2/../lib/i386:/usr/lib::/opt/oracle/product/aserver/jdk/jre/lib/i386"/>
</environment>
<module-data>
<category id="start-parameters">
<data id="java-options" value="-server -Djava.security.policy=/opt/oracle/product/aserver/j2ee/OC4J_BI_Forms/config/java2.policy -Djava.awt.headless=true -Xmx512M -Xms128M "/>
<data id="oc4j-options" value="-properties -userThreads "/>
</category>
<category id="stop-parameters">
<data id="java-options" value="-Djava.security.policy=/opt/oracle/product/aserver/j2ee/OC4J_BI_Forms/config/java2.policy -Djava.awt.headless=true"/>
</category>
<category id="urlping-parameters">
<data id="/reports/rwservlet/pingserver?start=auto" value="200"/>
</category>
</module-data>
<start timeout="900" retry="2"/>
<stop timeout="120"/>
<restart timeout="720" retry="2"/>
<port id="ajp" range="12501-12600"/>
<port id="rmi" range="12401-12500"/>
<port id="jms" range="12601-12700"/>
<process-set id="default_island" numprocs="1"/>
can anybody help me? it is urgent.
best regards
Daniel

Hi, thanks for reply to my problem.
Now i have an new problem , it's not possible to start opmn. (./opmnctl start) .
I get this error:
RCV: Transport endpoint is not connected
Communication Error for local port at OPMN-Server.
see log files for more information
opmnctl: opmn start failed
I have this logfiles:
HTTP_Server~1
ipm.log
OC4J~home~default_island~1
OC4J~OC4J_BI_Forms~default_island~1
ons.log
opmn.log
states (FOLDER !)
WebCache~WebCache~1
WebCache~WebCacheAdmin~1
i which can i see a detailled information about this error?

Can't start jstart.exe anymore

Hello,
I installed the SAP NW Composition Enviroment 7.1 Trial Verions SP1 Preview. Installation worked fine and everything in the sapmmc was green. The first WebDynpro tutorial deployment also worked fine. Today I had to restart my machine and after that I wasn`t able to start jstart.exe, anymore. Everything else starts without problems. Any idears? Here is the tracefile:
trc file: "C:\usr\sap\CE1\J01\work\dev_jstart", trc level: 1, release: "710"
sysno 01
sid CE1
systemid 560 (PC with Windows NT)
relno 7100
patchlevel 0
patchno 0
intno 20020600
make multithreaded, Unicode, optimized
profile C:\usr\sap\CE1\SYS\profile\CE1_J01_winxpsap20798
pid 3328
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, gi
arguments :
arg[ 0] : C:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
arg[ 1] : pf=C:\usr\sap\CE1\SYS\profile\CE1_J01_winxpsap20798
F
F Wed Sep 12 10:43:17 2007
F ********************************************************************************
F Java SDK properties (C:\usr\sap\CE1\J01\work\jstart.jdk)
F root directory : C:\usr\sap\CE1\SYS\exe/jvm/NTI386/sapjvm_5.1.006/sapjvm_5
F vendor : SAP AG
F version : 1.5.0_11
F cpu : x86
F java vm type : server
F jvm library name : jvm.dll
F library path : C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_5.1.006\sapjvm_5\jre\bin\server;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_5.1.006\sapjvm_5\jre\bin
F executable path : C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_5.1.006\sapjvm_5\bin
F ********************************************************************************
F SAP extensions : available
F ********************************************************************************
I
I [Thr 3332] Wed Sep 12 10:43:18 2007
I [Thr 3332] MtxInit: 30002 0 2
F [Thr 3332] *** LOG => connected to Message Server.
F [Thr 3332] *** LOG => Starting run level 1.
F ********************************************************************************
F Java process [deployment] properties:
F section name : deployment
F config file : C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : Deploy_offline
F home directory : C:\usr\sap\CE1\J01\j2ee\cluster
F shutdown timeout : 122000 ms
F exit timeout : 7000 ms
F sf support : false
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 3332] *** LOG => Instance state is "Deploying offline components" (STARTING @ 0, INACTIVE).
F [Thr 3332] *** LOG => Starting nodes: runlevel 1.
F ********************************************************************************
F Starting process: C:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=C:\usr\sap\CE1\SYS\profile\CE1_J01_winxpsap20798
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=deployment
F arg[ 5] = -file=C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F arg[ 6] = -jdkFile=C:\usr\sap\CE1\J01\work\jstart.jdk
F arg[ 7] = -traceFile=C:\usr\sap\CE1\J01\work\dev_deployment
F arg[ 8] = -javaOutFile=C:\usr\sap\CE1\J01\work\jvm_deployment.out
F env : JStart/ReserveSize=0x60000000
F exePath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_5.1.006\sapjvm_5\bin;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_5.1.006\sapjvm_5\jre\bin\server;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_5.1.006\sapjvm_5\jre\bin;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_5.1.006\sapjvm_5\bin;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : C:\usr\sap\CE1\J01\work\std_deployment.out
F stderr : C:\usr\sap\CE1\J01\work\std_deployment.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process Deploy_offline started with pid 3528
F ********************************************************************************
F [Thr 3332] *** LOG => Process deployment started (pid 3528).
F
F [Thr 3332] Wed Sep 12 10:43:21 2007
F [Thr 3332] *** LOG => Process deployment running (pid 3528).
F [Thr 3332] *** LOG => Instance state is "Deploying offline components" (RUNNING @ 0, INACTIVE).
F
F [Thr 3332] Wed Sep 12 10:43:24 2007
F [Thr 3332] *** LOG => Process deployment stopping (pid 3528).
F
F [Thr 3536] Wed Sep 12 10:43:24 2007
F [Thr 3536] *** LOG => Signal 13 SIGCHLD.
F [Thr 3332] *** LOG => Process deployment stopped (pid 3528).
F [Thr 3332] *** LOG => Instance state is "Deploying offline components" (STOPPING @ 0, INACTIVE).
F [Thr 3332] *** LOG => Run level 1 completed.
F [Thr 3332] *** LOG => Starting run level 2.
F ********************************************************************************
F Java process [bootstrap] properties:
F section name : bootstrap
F config file : C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : Instance_bootstrap
F home directory : C:\usr\sap\CE1\J01\j2ee\cluster
F shutdown timeout : 122000 ms
F exit timeout : 7000 ms
F sf support : false
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 3332] *** LOG => Instance state is "Synchronizing binaries" (STARTING @ 0, INACTIVE).
F [Thr 3332] *** LOG => Starting nodes: runlevel 2.
F ********************************************************************************
F Starting process: C:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=C:\usr\sap\CE1\SYS\profile\CE1_J01_winxpsap20798
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=bootstrap
F arg[ 5] = -file=C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F arg[ 6] = -jdkFile=C:\usr\sap\CE1\J01\work\jstart.jdk
F arg[ 7] = -traceFile=C:\usr\sap\CE1\J01\work\dev_bootstrap
F arg[ 8] = -javaOutFile=C:\usr\sap\CE1\J01\work\jvm_bootstrap.out
F env : JStart/ReserveSize=0x60000000
F exePath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_5.1.006\sapjvm_5\bin;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_5.1.006\sapjvm_5\jre\bin\server;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_5.1.006\sapjvm_5\jre\bin;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_5.1.006\sapjvm_5\bin;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : C:\usr\sap\CE1\J01\work\std_bootstrap.out
F stderr : C:\usr\sap\CE1\J01\work\std_bootstrap.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process Instance_bootstrap started with pid 3644
F ********************************************************************************
F [Thr 3332] *** LOG => Process bootstrap started (pid 3644).
F
F [Thr 3332] Wed Sep 12 10:43:31 2007
F [Thr 3332] *** LOG => Process bootstrap stopping (pid 3644).
F
F [Thr 3652] Wed Sep 12 10:43:31 2007
F [Thr 3652] *** LOG => Signal 13 SIGCHLD.
F [Thr 3332] *** LOG => Process bootstrap stopped (pid 3644).
F ********************************************************************************
F Java process [flightrec] properties:
F section name : flightrec
F config file : C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : flight_recorder
F home directory : C:\usr\sap\CE1\J01/j2ee
F shutdown timeout : 122000 ms
F exit timeout : 7000 ms
F sf support : false
F debuggable : false
F debugger active : false
F ********************************************************************************
F ********************************************************************************
F Starting process: C:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F arg[ 1] = -nodeId=1000
F arg[ 2] = pf=C:\usr\sap\CE1\SYS\profile\CE1_J01_winxpsap20798
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=flightrec
F arg[ 5] = -file=C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F arg[ 6] = -jdkFile=C:\usr\sap\CE1\J01\work\jstart.jdk
F arg[ 7] = -traceFile=C:\usr\sap\CE1\J01\work\dev_flightrec
F arg[ 8] = -javaOutFile=C:\usr\sap\CE1\J01\work\jvm_flightrec.out
F arg[ 9] = -clusterId=bootstrap
F env : JStart/ReserveSize=0x60000000
F exePath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_5.1.006\sapjvm_5\bin;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_5.1.006\sapjvm_5\jre\bin\server;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_5.1.006\sapjvm_5\jre\bin;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_5.1.006\sapjvm_5\bin;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : C:\usr\sap\CE1\J01\work\std_flightrec.out
F stderr : C:\usr\sap\CE1\J01\work\std_flightrec.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process flight_recorder started with pid 3836
F ********************************************************************************
F [Thr 3332] *** LOG => Process flightrec started (pid 3836).
F
F [Thr 3332] Wed Sep 12 10:43:38 2007
F [Thr 3332] *** LOG => Process flightrec stopping (pid 3836).
F
F [Thr 3844] Wed Sep 12 10:43:38 2007
F [Thr 3844] *** LOG => Signal 13 SIGCHLD.
F [Thr 3332] *** LOG => Process flightrec stopped (pid 3836).
F [Thr 3332] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).
F [Thr 3332] *** LOG => Run level 2 completed.
F [Thr 3332] *** LOG => Instance state is "Some processes failed" (STOPPED @ 0, INACTIVE).
F [Thr 3332] *** LOG => goodbye... (exitcode 22002, retcode 1)

Hi Gabriel,
 Please post default trace from
\usr\sap\<SID>\JC<instace no>\j2ee\cluster\server0\log
If you have addin installation, JC<instance no> will be some DEVSBM<instance no> .. somthing like this
Regards,
Hari.
PS: Awarding point's will get you some points.

I have problem with starting up my Mac Pro ?

Dear ,
I'have a problem with starting up my Mac Pro , please advice me how to start it

This may help.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

I had problem with my apps,they open for a while and closes with in seconds i cant acess them

i had problem with my apps,they open for a while and closes with in seconds i cant acess them and i had this with all apss,expect apple apps

Do you have a lot of apps? Did you use a lot of apps recently? If so, many of them may still be resident in memory even if you aren't currently using them. Double-tap the home key and you should see the app tray with a list of most recently used programs. Press and hold the icons in the tray and remove the ones you don't use often to remove them from memory. Powering off and then back on might also help.
My wife's iPod does that sometimes, and it's usually because we run out of memory due to apps remaining in memory even when not used. The suggestion above is how we normally fix the problems.

Problem with starting JSPM

Hi all,
I have a problem with starting JSPM. We have just upgraded to SAP NWS 2004s SP11 SR2. We are in AIX server. So to execute JSPM, I log on to AIX server using PUTTy with <SID>adm. I go to /usr/sap/<SID>/DVEBMGS00/j2ee/JSPM and i execute the "go" program. But I have the following thing :
Current log directory is /usr/sap/OWA/DVEBMGS00/j2ee/JSPM/log/log_2007_04_25_14_54_53.
Waiting for SDTServer to connect on hostname froafbwod1/10.8.134.129 socket 6240 ...
So what happend, I don't understand anything...Pls, someone can help me?
Thanks for your reply...

Hi,
Hope this helps you - http://help.sap.com/saphelp_nw04s/helpdata/en/42/e7e7cb64ac3ee4e10000000a1553f7/content.htm
JSPM: Better Know It Now Than Later
JSPM does not start
JSPM DIR_EPS_ROOT error during the execution of the JSPM_PROCESS phase
Bye...

Problem with starting OEM-agent on NT (clustered)

We have problem with starting the OEM-agent (9i) on Windows 2000. The Nt-server is clustered.
I have started the OracleAgent by the service screen. Everyting looks ok.
But, from the server where the OEM-console is installed I can't contact the
agent.
I stopped then the agent and started it by typing;
d:\oracle\ora92\bin\agntsrvc.exe
Than i get the error:
StartServiceCtrlDispatcher Failed with err 1063
Anyone an idea?
Thanks.
Klaas

Increate the virtual memory and try to start the service here:
SELECT START > CONTROL PANEL > ADMINISTRATIVE TOOLS > SERVICES
Joel Pérez

Problems with starting jstart.EXE (help for/from anyone needed!)

Similar Messages

Maybe you are looking for