Problems with tethered capture and the 4.2 update

I'm having problems with tethered capture and my canon 1ds mark III since I updated to 4.2. Is anybody else having issues with tethered capture that was working fine before the update?

http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=4.2+tethering

Similar Messages

Hi i have i problem with my iphone and the problem is the security question i have forgot the answers

Hi i have i problem with my iphone and the problem is the security question i have forgot the answers
I understand German and Italian i littlebit English

You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(106626)

HT1296 I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?

I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?

It could be that the existing wire in your appartment is not clean enough to provision DSL only. When combined with the phone possibly it has a higher line voltage and worked before. Now that the line is to be provisioned without phone service it may be giving them trouble that did not show before they came out and ran the new line test. So a new jack dedecated for your DSL line may require a new wire be run to your appartment. Also the account for internet only used to require direct billing to a credit card or something else. This was a number of years ago. Most accounts are linked to a phone number, and without a voice number it adds to the confusion.
If you are getting the voice and everything turned on as before, then I am at a loss for words.

Problem with Video Capture, and question towards solution

Yesterday I worked on a commercial for which we captured 9 clips (roughly 10 seconds or shorter in length). The clips all had text/titles superimposed on them by an outside machine and looked good in the monitors when they were exported and captured into FCP (ie: none of the text was chopped off).
I edited the commercial and then was exporting it out, only to discover that the text on the bottom of the clips was getting chopped off.
My first question is this: is there some setting in the capture process that could have done this? something that might have gotten tweaked accidently, or corrupted in some manner? Didn't have this problem with footage captured the previous day. And since it looked good before it was put into FCP, thinking it had to be a problem with FCP.
Also, in trying to tweak the footage in FCP, I came across a 'there must be an easier way to do it' question. Is there a way to alter parameters on multiple clips (such as raising them, like I had to)? I tried selecting all and double clicking, hoping that the changes I made would affect them all, but it only affected the one I directly clicked. I'm sure there's something simple (and obvious) that I'm overlooking...
thanks!

For how and why this could have happened, would you mind sharing your capture and sequence settings?
As far as applying parameters to multiple clips, I think you can make use of the Paste Attributes function in FCP...
Alter one of your problematic clips
Select that clip in the Timeline, then press Command-C (or control-click and choose Copy from the contextual menu)
Select the remainder of your problematic clips
With your clips selected press Option-V (or control-click on one of them and select Paste Attributes from the contextual menu) to bring up the Paste Attributes dialog
Select Basic Motion - under the Video options, on your left-hand side - then click OK
(Basic Motion because, if I understand your solution correctly, you altered the Center property - either in the Motion tab of the Viewer or manually in the Canvas - of your clips. You nudged them all up a bit, right? If you did, then that would fall under the Basic Motion attribute.)
All your selected clips should be nudged up appropriately.
But, again, I'm making a bit of leap since I'm not entirely sure what caused your issue in the first place.

Problem with iTunes Match and the song "This will be (an everlasting love)" from Natalie Cole

Hello,
I'd like to report a problem with iTunes Match and Natalie Cole's song "This will be (an everlasting love)".
When I stream it or download it on another device I don't get Natalie Cole's song but another one from Maxine Nightingale (Right back where we started from).
Please tell me if you have the same problem or how I can report this problem to apple.
Thank you.

Hi,
This is a user to user forum - not Apple. Contact them http://www.apple.com/support/itunes/contact/
Alternatively if the song was purchased from iTunes, you may be able to report the problem by signing into you iTunes account on your computer. Report an problem with an item you bought from the iTunes Store, App Store, Mac App Store, or iBooks Store
JIm

Stratosphere- Problem with Screen Capture and Group Text Reply

I have a problem with the side button that locks/unlocks the phone. I don't know why it happens but sometimes when I press the side button to lock the phone it takes a screen shot and send its to my Gallery under the folder ScreenCapture. I can't figure out why it does this sometimes, and when i want to actually take a screen shot I cant.
Anyone know how exactly you can take a screen shot?
Another question i have is with Group Texts. Is there a way to reply all when I receive a text that was sent to multiple people or can I only reply to the sender?
Hope someone can help thanks!

Hello kfeatherstone! I can provide you with instructions for taking a screenshot:
1. Press both the Power and Home buttons briefly.
2. You should hear a “click” sound and the screen will say “Screen captured. Saved as image file
In regards to your messaging, "reply to all" is not an available option. I hope this information helps!
ChaunceyM_VZWSupport
Follow us on twitter @VZWSupport

Hey, im experiencing problems with itunes. i downloaded the recent itunes update yesterday and today i plugged my iphone in and my computer said there was a trojan horse and now itunes wont open. Help please??

Hey guys, Im expierencing problems with itunes after the latest update yesterday(1/22) and the problem im having is when i plugged my iphone into my PC today a virus detection came up and said a trojan horse was present. I also cant open itunes at all. Im confused and dont know what to do. thanks in advance

Place the device in DFU mode (google it) and restore.

I have a problem with HP ToolboxFX and the encountered an error and can not recover error msg.

Restarting the software and/or the computer do not fix the error. I have installed the new firmware in my CP2025dn Color Laser it now has version 20110212 firmware. The error msg reports: windows version Win32NT-6.0.6002.131072 and HP Toolbox FX version 004.012.00146. I am running the printer on my wireless router. My computer is a Dell Studio with Vista Home Premium Service Pack 2 - 64 bit OS. My wife's older laptop with WIN XP is not having a problem with Toolbox. I have uninstalled and reinstalled Toolbox on my computer today also. Where do I look next? Thank you!!!

Hi
Please find the link given below might help you to fix your issue.
Link
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Problem with lenovo t60 and the vga output

I have a problem with the vga output and the lenovo t60
When i put the videoprojector connector in to the lenovo t 60, the projector reponde is:
Not supported
H: 48.20khz v: 143,10 hz
On my desktop pc the projector function on 1024x768 resolution and the 60 hz to refresh.
The same configurations are on my laptop and the projector doesn't function
Please help me.

I too have this problem. My T61 worked fine for about a year, and then suddenly would no longer project. I had made no changes to the settings for the external display, though since the problem started I've tried many combinations without success. Typically the projector reports that the frequency settings the laptop is sending are unsupported. In my case the vertical rate is usually correct (60 Hz) but the horizontal rate varies wildly.
I suspect a hardware problem, as this post suggests: http://www.edugeek.net/forums/av-multimedia-related/32128-laptop-wont-display-projector.html. (Note the message claiming that 6 out of 40 Lenovo laptops exhibited this problem.)
Since my system is still under warranty I guess I'll have to get it repaired, but I'd rather hear of a software fix...

Problem with combo boxes and the reset button in certain situations

Hi Everyone,
i have a problem to make the reset-button function properly in an what-if analysis dashboard.
The dashboard uses two combo boxes that are not visible at the same time. In my application the second combo box only appears when a dedicated menu (label based menu button) has been activated.
So i have combo box 1 when menu A is active an dand combo box 2 when menu 2 is active.
After starting the dashboard initial values are fine. If you then directly change to menu 2 (seeing combo box 2 with
the correct default value) and press the reset button, the dashboard returns to the initial view, showing
the menu 1 with the correct default value. If you now switch back to menu 2, you will see, that the combo box 2
is empty (i.e. nothing selected).
I also tracked the destination cells for the combo box value results as well as the source cells for the "selected item" and the
destination cells for the "Insert Selected Item". All this values seem to be correct. Therefore i assume that
this is an issue of event handling. Maybe the combo box 2 does not refresh its selected value because it is already
invisible when the values are restored.
This case can easily be simulated by placing two combo boxes and a push button (that changes the visibility of
the combo boxes) and the reset button on the canvas.
Maybe someone can help. I am able to provide a test xlf, if neccessary.
Thanks,
Oliver
P.S. I am using Xcelsius SP4 (Version 5.4.0.0)

Hello Debjit_Singha_86,
thank you for your support. At the moment i have the following setting:
label based menu
- General: Insertion Type "value" from a list of ID's for the menu-items to a dedicated cell (current menu ID, say tab1!$A$1)
- Behavior: Selected item (position) fixted to item 1
hidden combo box
- General: Insertion Type "position" to a dedicated cell with the current choice (say tab1!$B$1)
- Behavior: Selected item (position) to the same cell (tab1!$B$1)
Can you give me a hint on how to connect the two components according to your solution, so that the label based menu sets the default for the hidden combox box only in case, that the reset button is pressed?
Thanks,
Oliver

Having problems with front row (and the opticle drive)

I bought my macbook three days ago, and I'm already having problems. First off, I transfered music from my user profile on my old iMac G5 to the macbook via data DVD. My music collection had some purchaces from the itunes store, so I had to go through the authorization thing, and I can now play them just fine in the iTunes library, but the problem is, if I try to use the front row program to play my purchaced music, I get the message saying that I have to authorize it first. What the ****? Does anybody else have this problem? Also, like many other macbook users, I'm having problems with the opticle drive, such as getting cds to be recognized and other things of that nature.

I noticed that this problem started after I tried to use a software to unlock my drive's region...
I believe this is the problem. The VLC Media Player will usually play DVDs from other regions without changing the settings on your optical drive. You may need to reset your optical drive's firmware back to the original setting, make sure you have the region set for the one you'd prefer to use the most and then use VLC to play the other DVDs.
-Doug
P.S. After two years in the Front Row forum, I'm not sure I've ever heard of anyone playing HDDVD_TS folders with Front Row. I'm not saying it won't work, but I'm not sure it's really supported either. I do have DVD Studio Pro myself, but I'll have friends or family staying with me for nearly the next month, so my evenings and weekends will be a bit full to try making one up for testing...

Driver Scanner will not update, there is a problem with proxy sttings and the firewall

Driver Scanner will not update. It says there is a problem in connecting to the Uniblue browser.
Also there is a problem with the proxy set up and the firewall.

With that one, let's try getting an installer log to the Apple engineers for a look.
1. Open a command prompt window. (Start menu -> Run. Type in "cmd". Hit return.)
2. Drag and drop iTunesSetup.exe onto the window so that the full pathname of the file is at the command line prompt.
3. Type in a space, then the following line:
/l*v C:\log.txt
4. Hit return.
5. The installer will create a log file:
C:\log.txt
Find that file and send it as an attachment to this email address: [email protected]
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

Wee Problem with Parallels Desktop and the Westmere Mac Pros

Just got my new Westmere 8-Core Mac Pro last Friday, and spent the last four days in agony.
I used Migration Assistant to transfer over my accounts from my old Mac Pro, but it crashed hard -- so hard that I had to reformat the hard drive and do a clean install of the system. So I decided to do a clean install of all of my programs as well, and the Westmere crashed on the Parallels Desktop installation. And, again, it crashed so hard that I had to reformat the hard drive and do a clean install of everything all over again.
Today, I read a review of the Westmere Mac Pros in Macworld (http://www.macworld.com/article/153704/2010/08/quad8_core_macpro_2010.html?lsrc=top2), and learned:
We ran into a problem running Parallels on the Westmere-based Mac Pros, so we could not complete the Speedmark 6 suite of tests. When booted into 64-bit mode (as the new Mac Pros do by default) the systems would crash with Parallels installed. Booting into 32-bit mode would allow the systems to start up, but we still couldn’t use Parallels. We eventually tried a complete wipe and reinstall from the Mac Pro’s systems disc and downloaded the very latest version of Parallels to eliminate any other potential problems, and had the same issue. Apple and Parallels are aware of the problem and assure me that Parallels is working diligently on a fix. The application worked just fine on the new quad-core Mac Pro with the Nehalem processor.
Hoped I saved somebody some time.

Hi akapod,
Looks like they may have the fix out.
Mac Pro (Mid 2010): Kernel panic when installing or restarting Parallels Desktop 5 for Mac
Please let me know if it's available and fixes it.
Thanks,
ivan

Problem with tab bar and the method viewDidLoad

Hi,
I created a new project from the templates (tab bar application). then I created two views, for the two itens on the bar. The second view controller has a method viewDidLoad, but the method is loaded when the program launches. I tried the loadView method, but it´s never called.
How can i know when the view is loaded through a tab bar item?
thanks

I have an application based on the Tab Bar template as well, yet mine works. I also have views created via IB for each tab, but there are a series of connections which need to be made for the viewDidLoad method to be called. I made some notes along the way, perhaps they are helpful.
In these notes, what I did was create the Tab Bar project, but I didn't like the way the views were set up, so I created a series of new views, added them the way I preferred (all from files, all the same view, including the first view), and then deleted the two default views.
- Create a Tab Bar project.
- With XCode, create a new UIViewController for the new first view, save it, add it to the project.
- In IB, create a new view, save it, and add it to the project.
- In the new view's File's Owner, set the class to the new view controller.
- Connect the view outlet to the new view created.
- Go to the tab bar control in the MainWindow.xib and create a new view controller.
- Select the new tab button, and type in tab name and xib filename (without the extension).
- Compile and run. With a label in the new view, it is easy to see if it works.
Let me know if you find the problem.

Problem with media player and the uploaded music

since i downloaded the new version of the nokia pc suite every time i upload a song to the memory and try to update the library in the media player, the phone just shows the updating bar but it doesnt do nothing,it just says updating and thats it i have to cancel the operation and close the media player, and the only i dont remember that well but i think the nokia music manager is uploading the songs to another folder, right now the default folder is e: sounds/digital can that be the problem ?
and another thing, if i go to the built in archive manager in the phone i can see the songs i upload but in the media player i dont see them. Any idea?
Message Edited by alex18 on 18-Apr-2008 08:39 PM

25-Apr-2008 03:56 AM
alex18 wrote:
well i found another thing on my phone , everytime i turn off the cellphone and then turn it on the media player is allways open on the background.
this is a normal feature of n73 ME...sad isn't it? that's one thing i didn't want with my old phone...
What you can do is to go to music player then click options and then exit...
hope this helps.
CeS
"The best index to a person's character is how he treats people who can't do him any good, and how he treats people who can't fight back"

Problems with tethered capture and the 4.2 update

Similar Messages

Maybe you are looking for