Problems with Tomcat Server : Does not respond (Sometimes) - Plz Need Help

I have a web application running on Tomcat 4.1.31. (SUN/Solaris)
Clients access through iPlanet Web Proxy (SUN/Solaris).
Theres a class that build a generic form (it return html codes) then it's affected in the JSP page :
MyClass class = new MyClass();
<%= class.getHtmlCode() %>
the size of the form is variable (100Ko to 1,5Mo)
When i m using the proxy, sometimes the server does not respond when he do the affectation <%= class.getHtmlCode() %>.
If i call the page without proxy it work.
The problem seem not depending of the size of the form. Without proxy it always work. And with proxy sometimes the server does not work.
Please need help

Originally Posted by scum
Hey All,
Need some help with ZDM7 PXE preboot services.
Currently running a netware 6.5 server in VLAN1
PXE client sitting in VLAN2.
DHCP Server is running on VLAN3
IPHelper is running
DTS.ini, PDHCP.ini and TFTP.ini are unmodified.
I have had networks put an IPHelper in place and my client successfully picks up an IP address. The screen displays the "BOOT SERVER IP" correctly and the clients IP details are correct.
I watch the top of the screen where the Timeout counts down and eventually gives this error.
"Error: The server did not respond as requested in time
ZENworks shutting down...
Press any key to continue..."
This happens on every machine i have tested. If i hold down the Ctrl+Alt keys, then the imaging menu appears, i can select maintenance and the client will pull down the initrd, etc.. fine.
if i disable the IPHelper, move the client to the same VLAN as the server, then the whole process works perfectly.
not sure where to go from here.
help please ;)
leon
Hi Leon,
If you are getting the ZENworks menu when holding down the Ctrl-Alt keys, PXE/PDHCP seems to be doing the right thing. Routing issues also don't seem the case as you can pull down the first PXE boot files....
The server running PXE, I assume it also runs the TFTP and Imaging services?
These services are also running a recent version of Zen 7 (IR3/IR4)? A little more info on these components and what server they are on would be good :)
Cheers,
Willem

Similar Messages

  • Server does not Respond

    When I try to Sync my E61 with Ovi.com I get this message: Server does not respond.
    Can someone help me with this?

    Sorry, Erga, for the late reply. Yes, I got the sms settings and I can acess the internet. I've already tried removing the device and adding it again to Ovi. I got a new sms but the end result is the same: Server does not respond...

  • Server does not respond my Activacion! Server is Broken!

    Hi every one,
    i cant activate my iphone 5
    and server does not respond my Activacion

    Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes

    I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes imei: 01******206
    <Personal Information Edited by Host>

    لدي جهاز ترقفت الشبكه ويعطي جاري البحث وتم تحديثه ولم يتم حل المشكلهة  والان الجهاز لايقبل التنشيط والايتونز لايتعرف عليه امل تنشيطه 013619004986206

  • This server does not have the module needed for interpreting traces

    I wan to use the Trace Control function of the Exchange Troubleshooting Assistant. I specifically want to look at the transactions of a particular user. When starting the function I get the message, "This server does not have the module needed for interpreting traces." I find nothing to tell me what the module is or where to get it.
    Specifically, I have a Macintosh user (bigwig in my organization) that insists on using Apple's 10.6 Calendar program, and constantly complains that his calendars are different between his 3 Macs and his iPhone. He claims to have put a calendar item on one machine, now it appears nowhere. And I have no way of proving what is going wrong. He hates Outlook and refuses to use it, he hates Entourage and refuses to use it. The local database for Entourage kept getting fouled up to the point that we kept having to delete this account and readding it to force the recreation of the database. The database tool never fixed the problems and of course he did a lot of customization that got destroyed every time we deleted the account settings and added them back.
    I really want to run the tool for a while and see if there is actually some transaction actually happening on the server side, so I would like to have these traces and be able to view them.
    SnoBoy

    See
    http://blogs.msdn.com/b/dvespa/archive/2011/05/27/how-to-use-extra-to-troubleshoot-rpc-client-access-issues.aspx.
    Just click on ok and proceed with set trace manually.
    Svetozar Petrović

  • HT4463 I bought the OS Moutain Lion three weeks ago, but I can't download it. The site does not responde. Could somebody help me?

    I bought the OS Moutain Lion three weeks ago, but I can't download it. The site does not responde. Could somebody help me?

    Turn off the Firewall in System Preferences > Security & Privacy > Firewall
    Disable anti virus software.
    Make sure your Mac meets Mountain Lion requirements > Apple - Upgrade your Mac to OS X Mountain Lion.

  • Satellite U305-S7432 freezes and does not respond sometimes using Win XP

    Hello.
    I have a Satellite U305-S7432 notebook.
    Originally it came with Vista but I reformatted with XP Pro. I have installed all updates up to service pack 3.
    My problem is that sometimes when I try to restart the computer it simply freezes and does not respond at all to any input. I notice that this happens if I close and later open the lid (meaning that the computer goes input standby mode and comes back).
    Please note that the standby mode works perfectly fine and the computer leaves standby fine but afterwards when I try to restart, the computer will simply hang instead of restarting.
    If it never enters standby mode, the restart takes place as expected.
    I have installed all drivers and there are no question marks in Device Manager. I updated to the latest chipset driver from Intel (for the mobile 965) as well. Lastly, I also tried adding /forceresetreg to my boot.ini (as suggested by: http://support.microsoft.com/kb/822624) but to no avail.
    Any ideas?

    This is a Toshiba US notebook series and you should check the Toshiba US driver page for available drivers:
    http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
    If you will not find the XP drivers at this page then you could try to install some single drivers for Sat U300 from the Toshiba European page but Im not quite sure if such XP drivers will run on you Sat U305. But its worth a try!
    Good luck

  • New-SPWOPIBinding Failing with "The server did not respond"

    I am currently attempting to create a binding between my SharePoint environment and our Office Web Apps server.
    I am able to connect to the Office Web Apps server when I allow HTTP connections (on both the Web Apps Server and the SharePoint server) and create the binding using the -AllowHTTP command but am unable to connect to the server when trying over HTTPS.
    I have created a DigiCert UCC certificate for the Office Web Apps server that uses the common name of the DNS CNAME entry for the Office Web Apps server (owas.contoso.com) and includes the FQDN of the server in the SAN (saowas.contoso.local).
    I can ping the Office Web Apps server from the SharePoint server and can hit https://owas.contoso.com/hosting/discovery over HTTPS from the SharePoint server, and have disabled the firewalls on both servers.
    When I attempt to run New-SPWOPIBinding -Servername "owas.contoso.com"
    on the SharePoint server it quickly gives me the WARNING: The server did not respond.  Trying again (attempt 1 of 5)
    errors.
    Any help would be appreciated.

    You can check the ULS logs, found in the 15 hive, by default:
    %ProgramFiles%\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
    I would recommend a log viewer though.  There are several out there (I use the first one):
    http://archive.msdn.microsoft.com/ULSViewer
    http://ulsviewer.codeplex.com/
    http://sharepointlogviewer.codeplex.com/

  • Has anyone had a problem with the spotlight search not working sometimes?

    Has anyone had a problem with their "spotlight search" not working? If I restart the phone it will work for a few days then not work again.

    It's more likely the OP's router.  I have a wifi only iPad 2, yet location services work just fine on my iPad.  If I open maps, my location is found quite nicely.  I have seen that some routers do not provide location services and I suspect the OP has such a router.

  • After upgrade firmware my iPod does not respond to touch. Help me!

    After upgrade firmware with iTunes my iPod does not respond to touch.
    To be more precise - works, but very, very bad. And around the icons on the display is visible GRAY line of width 1 px.
    Please HELP me! This iPod - the gift for my girl.
    p.s. Maybe this problem arose because I reflash iPod with old cable from the iPhone?

    Thanks all, i solved the problem yourself.
    I helped this one topic: http://discussions.apple.com/thread.jspa?messageID=12641053&#12641053

  • TS3899 My email keeps telling me the message failed because the server does not allow relaying. Please help

    My e mail keeps coming back with a message saying failed because the server does not allow relaying. Please help

    Check the suggestions at this website. They may help you get email working all the time.
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/

  • IPod does not function well. i need help!!

    I got this iPod, bought frm korea. Tried to dwnld songs in it. Wen connected to computer, it doesnt come out in iTunes. It comes out at mycom. Wen i dwnld songs manually, it cannot be play & my ipod went blank and turn off. went i connect it back, the files are corrupted and ther are viruses on it. itried evry solutions on the internet. i even format it wic i shud not do it. i need help. & this ipod doesnt look like an original one. since i bought it overseas, its hard for me to find a service product here.

    As you now know, it appears you have a fake iPod.
    http://discussions.apple.com/thread.jspa?threadID=972344&tstart=0

  • Problem with Tomcat server

    Hi,
    I'm just writing to inform you about a problem with the Oracle 9i database I found out.
    I have downloaded and installed the release 2 enterprise/standard/personal edition for Windows NT/2000/XP.
    After doing that I could not start my Tomcat server any more. Although I have tested the situation with many different releases of the Apache Tomcat server it did not work.
    Then I've deleted the Oracle database and just installed the client release. And now it works!
    I'd be grateful if one of you could tell me what's the problem and how I can solve it.
    Thanks for your help.
    Best regards,
    Steffi

    the localhost.log file shows
    02-Jun-2008 13:57:36 org.apache.catalina.core.ApplicationContext log
    INFO: ContextListener: contextInitialized()
    02-Jun-2008 13:57:36 org.apache.catalina.core.ApplicationContext log
    INFO: SessionListener: contextInitialized()
    02-Jun-2008 13:58:23 org.apache.catalina.core.ApplicationContext log
    INFO: SessionListener: contextDestroyed()
    02-Jun-2008 13:58:23 org.apache.catalina.core.ApplicationContext log
    INFO: ContextListener: contextDestroyed()
    and the catalina.log file shows..
    02-Jun-2008 13:58:24 org.apache.coyote.http11.Http11Protocol destroy
    INFO: Stopping Coyote HTTP/1.1 on http-8080
    i couldnot understand anything..how to rectify that..
    thanks in advance

  • (06 Oct 14) updated firefox and Kaspersky, now have problems with Barclays site - firefox "not responding" and plugin error on trying to close. Help!

    Updated Kaspersky to 15.0.0.463(a) - ( comes with "safe money" - now turned off).
    Updated Firefox from (old) version to 32.0.3.
    Barclays bank site loads properly, and allows access to accounts BUT when I try to look at a statement, Firefox "not responding" and a blank/ unresponsive page is displayed.
    In order to acheive any movement I have to close firefox... this gives rise to windows wanting to send error data, and Firefox apologising for loosing the tab.
    None of which allows me to do essential banking transactions.
    It is this machine that has the problem - I can access without problems via work computer (using google Chrome)

    My guess is that your statement is a PDF document, since banks and other companies often use that format for statements.
    Firefox has various options for viewing PDFs, including a built-in PDF viewer (not as full featured as Adobe's), or the option to use a plugin such as Adobe Acrobat, or to launch the PDF in an external application. This article describes how to experiment with that setting: [[How to disable the built-in PDF viewer and use another viewer]].
    On another subject, your plugin list has various plugins described as "Google Chrome Extension". I haven't seen that before. Could you review the list and see whether they really should be active in Firefox or can be deactivated?
    Open the Add-ons page using either:
    * Ctrl+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Plugins.
    For those that are not essential, I suggest changing them to "Never Activate". This might not take effect immediately in that window, but should disable them in new windows.

  • Report Server does not respond after certain idle time

    We have an oracle 10g application server on solaris 10.
    The report server has the defaul settings for time out , callback etc..
    After the report server stays idle for 2 or 3 hours and the first report that comes after that takes around 8 to 10 minutes to generate. The report server engine does not seem to be getting active immediately.
    Is there any parameter I can change so that the reports do not get effected.
    Thanks

    I have put the idle time out at 300 minutes and the max idle time as 350 minutes. But that does not seem to have helped.And also I have min engine as 1 , max as 10.
    Even with the above settings , When the report engine is idle after 30 minutes the 1st report to generate after 30 minutes takes 9 minutes.
    please let me know if there are any other parameters I need to change.
    thanks

Maybe you are looking for

  • Using NonCatalogLogger along with the LogMBean

    Hi anybody According to the API, the NonCatalogLogger class provides application services for logging error messages to the weblogic server log. The name, location and other properties of the logfile are determined by the LogMBean for the server. Now

  • Can't see anything in iWork 08 after installing it on my new MacBook Pro

    I recently reinstalled IWork 08 in my new MacBook Pro.  I was using it on my old MacBook Pro, which my wife now has.  When I open any of the programs, everything is white. If I double click any text that may be in the file, it can be viewed as highli

  • Is there a way to recover a portion of a video? I accidentally clipped the wrong portion.

    While editing a movie I took on my iPhone, I clipped and saved the wrong portion of the movie I wanted to save.  Is there a way to recover that clipped portion?  Thx.

  • Mighty Mouse Scroll Down Issues

    Hello, I have a wired Mighty Mouse that I use with my Mac Mini. For awhile my mighty mouse will scroll up, and side to side but it will not scroll down. I have used a lint free cloth and tried cleaning it vigorously upside down with the felt cloth as

  • OLE performance issue

    Hi, In one of my programs I have used OLE automation to donwload the contents into an EXCEL File.The Program as well as the File is getting downloaded properly. BUt the only issue that is coming is that OLE is taking a lot of time and the performance