Problems with Transfer Rules

I have the following message when I try to open a transfer rule
Transfer Rules 2LIS_03_S642_BB are Missing
InfoSource Extraction using 2LIS_03_S642
Cannot Restore
You Now Have to Recreate All Rules with Changes
Do You Want to Create this Identifier Now?
If I say yes it does not allow me to since it asks me to specify a transport which I do but it cannot recognise. Does anyone have a solution? I have run the programs RSAR_TRANSTRUCTURE_CHECK and RS_TRANSTRU_ACTIVATE_ALL which makes no difference. Thanks

hi Niten,
possible your infosource assigned with datasource that source system not exist anymore ?
if no own created routines in transfer rules, perhaps try to activate again from business content infosource 2LIS_03_S642 with dataflow before ?
hope this helps.

Similar Messages

Problem with scrambling rules

Good afternoon, I have a problem with the conversion rules, when I transfer the employee does not take into account any of the scrambling rules, those made by me and with the rules that I copied by CNV_TDMS_HCM_SCRAM transaction. I understand that this conversion is performed in the task to prepare data transfer. Someone can give me an idea that I may fail to do. Somebody has documentation of Scrambling rules? Thanks in advance.
Manuel Campos

Thank you, when I execute the program wherever Phase or activity ID that I select, for example PC001_RULES_MAINTAIN
It shows me this:
Rules for packege 90042
Rule Name                     Status         Active
CNV_MBT_BOP             red              check
INITIAL                           red             check
MOVE                            red             check
01_RVNUM_CK_DGT      red             check
99_HR_PEVAL2              red             check
99_PD_SEQ_NR             red             check
ADDR_SCRAM1             green          check
SAMP_SCR_DOM          red             check
SAMP_SCR_FIELD        green          check
In your package appear something like this?
I used transaction CNV_TDMS_HCM_SCRAM to prepare and maintain customizing for
scrambling at project or subproject level. And I made this:
To use the SAP template, choose Copy from other Project. You can now copy a scramble
definition. To copy the SAP template, input the following:
Pack ID: TDHSC
Project: *
Subproject: *
Process Type: R
Select the "Get from client 000" checkbox .
You can use a description prefix, for example SAP_, to easily identify elements. For
example, if you use this prefix and the name of a scramble group in the template is
HCM_DE_01, then after the copy the name is SAP_HCM_DE_01. This is useful for copying
in add-on mode into an existing project, because it helps you to determine what was new
from this copy.
Then I tried to use this scrambling rules copied, but They doesn´t work.
Thanks a lot for your help

0CRM_OPPT_H Infosource extraction problem (no transfer rules from Content)

Hi there,
I'm having a problem with 0CRM_OPPT_H infosource on BW 7.0 and Content version 703 SP9.
After activating the object from content there is no transfer rules for header infosource, item infosource is ok and I'm getting data. I've tried to created a DTP from scratch but I'm not geting data from source system. I've tested getting data from source system with RSA3 extraction test and it's working fine.
I've been checking on sdn and tested changing authorizations but it doesnt work.
Any ideas ??? It's normal I'm not getting transfer rules from content? Why I can not assing Datasource 0CRM_OPPT_H to inforsource 0CRM_OPPT_H??
Thanks in advance,
Regards,
Carlos

I believe I had the same problem as you did. When you're installing the Business Content in BI you have to make sure BI knows which source systems you're installing BC from.
Go to RSA1 -> BI Content
In the Edit drop down menu choose "Source System Assignment"
Make sure your CRM and BI system are checked in the window that pops up. Try collecting for the 0CRM_OPPT_H again and see if the objects you're missing show up this time. If that doesn't work search through the specific object types for items you're missing. For example, search transfer rules for "0CRM_OPPT*" or just "0CRM_OPPT" (i'm not sure if the wildcard is valid in this instance) and see if what you're looking for shows up in the list.
Hope this helps.

Problem with business rule

Hi all,
I have a problem with a business rule (BR) deployed as a standalone Descision service.
the BR consists on a simple decision table wich compare an input (bigInteger) with 50. It returns two facts (as output).
the two conditions are confugured (i.e. <50 and >=50).
the Decision service (stateless) is called in a simple BPEL process. in some cases the the assign activity in the bpel process rise this exception :
<bpelFault><faultType>0</faultType><selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"><part name="summary"><summary>empty variable/expression result. The XPath variable or expression /ns5:callFunctionStatelessDecision/ns5:resultList/ns6:processResponse/ns6:CodeRetour is empty at line 440. An attempt to read or copy data referenced or computed by the XPath expression either had invalid data, according to the XML schema, or did not contain certain optional data. Ensure that the variable or expression result named in the error message is not empty. Enable XML schema validation of related variables to ensure the run-time data is valid. </summary></part></selectionFailure></bpelFault>
it seems like an output of the business rule used by the assign after the invoke activity is empty.
But in the input payload for the decision service all elements are not empty. I can't inderstand how the OBR return an empty variable?
Any help please?

In the taskflow you should be capable to trace step by step what happens in the execution. Does this give any clue, e.g. why sometimes the assert does not work?
cu
Andreas

Problem with Business Rules in OBPM 10.3.1 Enterprise for WebLogic

We're having a problem with our Business Rules. We've updated two of our business rules (that are used by business rule transitions) in Studio; however, when we publish the updated process, the business rules are not updated. We cannot find anywhere in the Process Admin where to administer the rules to make sure they're overwritten.
I've double checked, and the updated rule code is in the .project.xpdl, but for whatever reason, the rules are not being updated during the deployment. I'm sure that we've done this many times in the past, but for some reason, now it is not working.
We're tried variations of the different versioning when we publish, and we've also tried to unpublish all of the older versions of our process, but it does not change the business rules. We can try to unpublish and undeploy, but it seems like we would lose all old instances of that process that are still running if we did that.
Has anyone ever had this issue, or know if there is a way to effect the business rules via the process admin?

I see what you're saying, but here's why it works the way you're observing it.
Once deployed, the 10g business rules are edited by a business user (the owner of the rule). Changes in Studio that a developer makes to a business rule don't override the changes that the business user made.
To let the business owner edit the rule, add a Global Interactive activity and change its property setting to edit the business rule. Put this activity in the role for the business owner (the person you want to edit the rule).
Dan

Problem with Settelment Rule for iw32

Hi,
Good day guys
Iam getting the problem while creating the settelment rule creation. Ive got a problem with " wa_srules-SOURCE = '1' ".
If i wont fill this field, settelment rule is going to be created. but i need to fill this field as per requirement.
Ive got a error message "Enter an Existing source assingment for souce stracutre CS.
Plz any one guide me, how to overcome this prob
DATA: srules TYPE srules_ext OCCURS 0,
 wa_srules TYPE srules_ext,
 lv_mandt type SYMANDT.
DATA IT_OBJNR TYPE STANDARD TABLE OF IONRB WITH HEADER LINE.
DATA: ls_copadata type BAPI_COPA_DATA occurs 0.
DATA: ls_cobrb type standard table of cobrb with header line.
IT_OBJNR-OBJNR = CAUFVD_IMP-OBJNR.
APPEND IT_OBJNR.
break-point.
CALL FUNCTION 'K_SRULE_PRE_READ'
EXPORTING
 I_PFLEGE = ' '
TABLES
 T_SENDER_OBJNR = IT_OBJNR
* T_COBRA =
EXCEPTIONS
 WRONG_PARAMETERS = 1
 OTHERS = 2
CALL FUNCTION 'K_SETTLEMENT_RULE_EXISTENCE'
EXPORTING
 objnr = caufvd_imp-objnr
* FLG_LOCAL = ' '
* IMPORTING
* E_COBRA =
EXCEPTIONS
 RULE_NOT_FOUND = 1
 OTHERS = 2
CALL FUNCTION 'K_SRULE_CREATE'
EXPORTING
 i_objnr = caufvd_imp-objnr
* I_CHECK_ONLY_LOCAL = ' '
* IMPORTING
* E_COBRA =
EXCEPTIONS
rule_already_exists = 1
OTHERS = 2.
wa_srules-SOURCE = '1'.
wa_srules-settl_type = 'FUL'.
wa_srules-percentage = '100'.
*wa_srules-amount = ''.
wa_srules-COMP_CODE = caufvd_imp-bukrs.
*wa_srules-PROFIT_CTR = caufvd_imp-PRCTR.
*wa_srules-costcenter = caufvd_imp-kostl.
wa_srules-costcenter = '10-60'.
APPEND wa_srules TO srules.
wa_srules-SOURCE = '1'.
wa_srules-settl_type = 'PER'.
wa_srules-percentage = '100'.
*wa_srules-amount = ''.
wa_srules-COMP_CODE = caufvd_imp-bukrs.
*wa_srules-PROFIT_CTR = caufvd_imp-PRCTR.
*wa_srules-costcenter = caufvd_imp-kostl.
wa_srules-costcenter = '10-60'.
APPEND wa_srules TO srules.
CALL FUNCTION 'K_ORDER_SRULE_ADD'
EXPORTING
 object_no = caufvd_imp-objnr
* IMPORTING
* FLG_RULE_INSERTED =
tables
 srules = srules
IF sy-subrc = 0.
commit work.
Endif
Regards
Edited by: balaji kiran on Mar 26, 2010 10:18 AM

Hello Vitaliy,
Nice to "see" you here
I did try remodelling and it works fine here. A constant value rule really gets a constant value.
The user exit option also works fine here. Here's an example of a very simple user exit for a KF:
method IF_RSCNV_EXIT~EXIT.
FIELD-SYMBOLS: <l_s_old> TYPE ANY,
 <l_fillfield> TYPE ANY,
 <l_newfield> TYPE ANY,
 <fs_kfsource> type any.
* Assign the references to field symbols
ASSIGN c_r_newfield->* TO <l_newfield>.
ASSIGN i_r_old->* TO <l_s_old>.
* We will use the value of the 0AMOUNT KF. The value of the new KF is 0AMOUNT + 5.
ASSIGN COMPONENT 'AMOUNT' OF STRUCTURE <l_s_old> TO <fs_kfsource>.
<l_newfield> = <fs_kfsource> + 5.
endmethod.
For a KF, you can check the fields of the FACT Table (/BIx/Fzzzz) to know the field names for your source KFs.
Hope this helps.

Problem in transfer rules-- Calling the function module.

Hi All,
when we r extracting the data from r3, the infoobject 0wbs_elem the data pulled is in internal format in which wbs element is stored.
wbs element gets stored in a different way compared to front end.
Eg. The external format is /abc/123 the internal format is 00012300.
I have written a transfer routine using the function module CONVERSION_EXIT_ABPSP_OUTPUT.
the code goes like this
data ifield(30) type c.
call function CONVERSION_EXIT_ABPSP_OUTPUT
Exporting
input = tran_structure-wbselem (Field in transfer structure---name of the field in source system) .
Importing
output = ifield.
result = ifield.
End of code.
Problem
When I am Scheduling the package the job doesnt get completed for a long time and fails.Is there a problem with the code. When trying for the Simulation of the datapackets, the system says no data package number could be determined.
Please help me out...
Thank You
Mahesh

Hi Mahesh,
Could you please check ST22 and see if there is any short dumps ?
try to do test run for the FMs using SE37 and see what is the output for your input.
Do you have PSA for the load ? It may also have been deleted. You get this message when there is no PSA available.
hope it helps
Thanks
Soumya

Problem with transfer photos from iCloud to Aperture

Hi, I have a problem with APERTURE. I Can't transfer a photos from iCloud to project of Aperture. I have Macboook Pro 15, model 8,2 with MAC OS X Maverick and Aperture 3.5.1. Who can help me ? Many thanx.

If I want to work them I have to transport these photos to some folder or project in aperture but unurtenetly It doesn't work.
Now I see. You should be able to drag any image from your photo stream to a project (not to a folder).
For example:
Or set your Aperture preferences to import automatically:
That will create monthly projects -
Does that not work?

SOS Problem with navigation rules

Hello,
I have been stuck for some time with a navigation problem: It seems my faces DD is read but the navigations rules are not. Unfortunately it does not give me any exception. The only thing that occurs is that the home page reloads itself instead of redirecting to the second page.
Here is my DD:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE faces-config PUBLIC "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN" "http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
<faces-config>
 
 <application>
 <locale-config>
 <default-locale>en</default-locale>
 </locale-config>
 </application>
 
 <managed-bean>
 <managed-bean-name>GuideSearchManagedBean</managed-bean-name>
 <managed-bean-class>com.softwareag.test_guide.web.temp.PGSearchManagedBean</managed-bean-class>
 <managed-bean-scope>session</managed-bean-scope>
 </managed-bean>
 
 <navigation-rule>
 <from-view-id>/home.jsp</from-view-id>
 <navigation-case>
 <from-action>#{GuideSearchManagedBean.newSearchAction}</from-action>
 <from-outcome>displayResults</from-outcome>
 <to-view-id>/errorOccured.jsp</to-view-id>
 </navigation-case>
 </navigation-rule>
</faces-config>Here is my jsf:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<f:view>
<html>
<head>
<title>home</title>
</head>
<body>
<h:form id="guide_form">
category
<h:selectOneMenu id="category" value="#{GuideSearchManagedBean.category}" required="true">
<f:selectItem itemValue="2" itemLabel="resto"/>
<f:selectItem itemValue="1" itemLabel="bar"/>
<f:selectItem itemValue="3" itemLabel="disco"/>
</h:selectOneMenu>
 
postcode 
<h:selectManyListbox id="postcodes" value="#{GuideSearchManagedBean.postcodes}" required="true">
<f:selectItem itemValue="75001" itemLabel="75001"/>
<f:selectItem itemValue="75002" itemLabel="75002"/>
<f:selectItem itemValue="75003" itemLabel="75003"/>
<f:selectItem itemValue="75004" itemLabel="75004"/>
<f:selectItem itemValue="75005" itemLabel="75005"/>
<f:selectItem itemValue="75006" itemLabel="75006"/>
</h:selectManyListbox>
 
name
<h:inputText id="name" value="#{GuideSearchManagedBean.name}"/>
 
with comments
<h:selectBooleanCheckbox id="commentsExist" value="#{GuideSearchManagedBean.commentsExist}"/>
 
order by
<h:selectOneRadio id="sortOrderCriterion" value="#{GuideSearchManagedBean.sortOrderCriterion}" layout="pageDirection">
<f:selectItem itemValue="GRADES" itemLabel="note"/>
<f:selectItem itemValue="DB_ESTABLISHMENT_NAME" itemLabel="name"/>
<f:selectItem itemValue="DB_POSTCODE" itemLabel="postcode"/>
</h:selectOneRadio>
 
minimum note
<h:selectOneMenu id="minimumNote" value="#{GuideSearchManagedBean.minimumNote}">
<f:selectItem itemValue="1" itemLabel="1"/>
<f:selectItem itemValue="2" itemLabel="2"/>
<f:selectItem itemValue="3" itemLabel="3"/>
<f:selectItem itemValue="4" itemLabel="4"/>
<f:selectItem itemValue="5" itemLabel="5"/>
</h:selectOneMenu>
 
<h:commandButton id="submit" action="#{GuideSearchManagedBean.newSearchAction}" value="Submit" />
</h:form>
</body>
</html>
</f:view>Here is my Managed bean:
package com.softwareag.test_guide.web.temp;
import java.rmi.RemoteException;
import java.util.List;
import com.softwareag.test_guide.web.util.PGFactory;
* @author Julien Martin
public class PGSearchManagedBean {
 private String category;
 private List postcodes;
 private String name;
 private boolean commentsExist;
 private String sortOrderCriterion;
 private int minimumNote;
 public String newSearchAction(){
 System.out.println("----------within new search action--------------");//this line never gets printed
 return "displayResults";
 public String nextAction() throws RemoteException { //TODO: Remove that
 PGSearch search = PGFactory.getSearchInstance();
 String issue = search.next();
 return issue;
 public String previousAction() throws RemoteException { //TODO: Remove that
 PGSearch search = PGFactory.getSearchInstance();
 String issue = search.previous();
 return issue;
 public String getCategory() {
 return category;
 public boolean getCommentsExist() {
 return commentsExist;
 public int getMinimumNote() {
 return minimumNote;
 public String getName() {
 return name;
 public List getPostcodes() {
 return postcodes;
 public String getSortOrderCriterion() {
 return sortOrderCriterion;
 public void setCategory(String string) {
 category = string;
 public void setCommentsExist(boolean bool) {
 commentsExist = bool;
 public void setMinimumNote(int i) {
 minimumNote = i;
 public void setName(String string) {
 name = string;
 public void setPostcodes(List list) {
 postcodes = list;
 public void setSortOrderCriterion(String string) {
 sortOrderCriterion = string;
}Can anyone help? I am really stuck. :-)
Julien Martin.

Hi,
I added a messages component to your home.jsp page and saw that the page produced validation errors (often the cause for failed navigation).
The problem is that the beans property minimumNote expects an int but gets a String. When you change the the type in the bean to String it works.
You will probably want to add a converter to the uicomponent to get the correct type. I'd be happy to tell you how, but I'm just starting with jsf ;-).

Problem with a rule in workflow

Hello, i have a workflow that use a rule for assign inbox of the users,
when i test the rule it seem to be good, because in the result i can see the right user.
In my workflow i have 4 levels of authorizations.
The first level works well, but the second not.
1) Information for agent determination for step
0000000013.
A problem occurred when determining the recipient for step 0000000013. This problem does not lead to execution being canceled.
2) Error in resolution of rule 'AC99800002' for step '0000000013'
The function module for rule 'AC99800002' initialized an exception and returned a message ("MESSAGE ... [RAISING ...]").
3) No agent found
How can i resolve this issue?
Thanks

If you use responsibilities, you should check if you have all options covered. There shouldn't be an input variable for which no outcome is defined. So take a good look at the rule again.
And as suggested you can test it with the input variables you have in the container of the workflow.
Regards,
Martin

Problem with navigation-rules

Hello!!!
I'm using Jboss Jbpm with JSF and I want to navigate to other page when I fill a form and I send the data that I entered. I have declare the navigation-rules but it doesn't work and I don't know why.
In my faces-config.xml I've added the navigation-rules:
<managed-bean>
 <managed-bean-name>usuario</managed-bean-name>
 <managed-bean-class>com.miApp.UserBean</managed-bean-class>
 <managed-bean-scope>request</managed-bean-scope>
 </managed-bean>
 <navigation-rule>
 <from-view-id>/SolicitarAlta.xhtml</from-view-id>
 <navigation-case>
 <from-action>#{usuario.registrar}</from-action>
 <from-outcome>correcto</from-outcome>
 <to-view-id>/results/correcto.jsp</to-view-id>
 </navigation-case>
 </navigation-rule>
 The UserBean has the method registrar:
public String registrar() {
 if(dni==null || nombre==null || apellidos==null || ocupacion==null || mail==null || tlf==null ||
password==null)
 return "campos-obligatorios";
 if ((mail.trim().length() < 3) || (mail.indexOf("@") == -1))
 return "mail-incorrecto";
 else if(tlf.length()!=9) return "telefono-incorrecto";
 else if(dni.length()!=8) {return "dni-incorrecto";}
 return "correcto";
 And with this line:
<h:commandButton type="submit" value="Enviar" action="#{usuario.registrar}"/> the method registrar is executed and I know that this method returns the string "correcto" but ... This doesn't redirect me to the page correcto.jsp
I thought that maybe if SolicitarAlta was an xhtml file the correcto page should be also an .xhtml file. I changed it but it doesn't work.
Any ideas? Could it be that I have to add something more in the faces-config.xml & web.xml file???
Thx!

I found the solution to my problem but I don't really understand why it was not working. My problem was due to the use of command button with a render set to false. I just put them at true and all my navigation rules work!
If someone know why it was not working, I would be glad to know!

Problem with udev rule to disable touchpad when USB mouse connects

Hi, I've been running Arch on this laptop, but I can't get this udev rule to work properly.
What I want to happen is: when I plug in my usb mouse, the laptop touchpad is disabled, and the left and right buttons are reversed (I'm left handed)
After following several tutorials, both from the arch wiki and other sites, I've come up with this udev rule:
ACTION=="add", SUBSYSTEM=="input", RUN+="/usr/local/bin/USBMouse.sh"
ACTION=="remove", SUBSYSTEM=="input", RUN+="/usr/local/bin/USBMouse.sh"
And here's the script it links to (USBMouse.sh):
#!/bin/bash
export DISPLAY=:0.0
synclient TouchPadOff=$(/usr/bin/lsusb | grep "Microsoft Corp.\
Nano Transceiver v1.0 for Bluetooth" | wc -l)
if [[ $(/usr/bin/lsusb | grep "Microsoft Corp.\
Nano Transceiver v1.0 for Bluetooth" | wc -l) == 1 ]]
then
xmodmap -e 'pointer = 3 2 1'
fi
if [[ $(/usr/bin/lsusb | grep "Microsoft Corp.\
Nano Transceiver v1.0 for Bluetooth" | wc -l) == 0 ]]
then
xmodmap -e 'pointer = 1 2 3'
fi
Running the script from a terminal returns no errors and works as expected. The problem is when I plug/unplug the mouse from the usb port, nothing happens.
I appreciate any insight you might have about how to fix this, and thank you in advance

This has already been done. And another relevant thread.

Problem with academic rule in report

Hello,
I have an academic rule that uses the Module Booking Single callup point (0003) and the checking is provided by an user-exit
The problem is that the rule Works fine through the transaction PIQST00 -> Change Module booking, (dialog mode) but when the hriq_student_booking function is called from a report, the rule doesn't check.
We have another academic rules created as this one, and they work fine in both environments (dialog and through HRIQ_STUDENT_BOOKING into a report)
I debugged the report and the value returned for this rule by sy-subrc is zero, when the expected value for a negative check result is nine
Any comments about this will be of great help.
Regards,
Diego

Hi Diego,
Within HRIQ_STUDENT_BOOKING we have the parameters IV_DIALOG and IV_MODE control the way the function responds when error messages are returned on a module booking (including VSR rule messages). Please check how are this parameters used in your implementation of the RFC.
I attach a brief documentation of the usage.
IV_DIALOG = D.- Technical errors will stop process immediately (RETURN_CODE = 4, message in EXP_OBJECT_SUBRC). With this option business errors will be collected by message handler (filtered by user customization) and displayed by VSR tool. If there is at least one remaining error message, no database update will be possible (RETURN_CODE = 4), but if user accepted displayed messages then the database update is processed.
IV_DIALOG =B.- Technical errors will stop process immediately (RETURN_CODE = 4, message in EXP_OBJECT_SUBRC). With this option business errors will be collected into global table GT_OBJECT_SUBRC, filtered by message handler and exported; if there is at least one remaining error message
no database update is done (RETURN_CODE = 4) if there are no errors database update is processed (RETURN_CODE = 0).
IV_MODE = T.- Test mode, no database update is processed, RETURN_CODE = 0 -> update would be processed without any problems RETURN_CODE = 4 -> update would not have been processed with the given module list due to errors (all messages are collected into ET_RETURN).
IV_MODE = V.- Database update is processed if no business errors are detected (such as VSR rules).
IV_MODE = F.- Database update even if business errors are detected (Overriding rules).

0PM_DS02 - Problem with Update Rule

Hi ,
I have installed the Standard ODS 0PM_DS02 from BI content.
Problem is --> In Update Rule all Data Fields have been installed perfectly but all Key Fields with Blank ( No Assignment ) .
I would like to know what is the reason that All the KEY Fields have installed with Blank .
Though I can do the manual assignment for characteristics like Equipment / Functional location but my specific area of Concern is what to assign to time characteristcs 0CALDAY / 0CALMONTH etc.
I would appreciate your help in guiding me what to assign in Key fields of 0PM_DS02 update rule.
regards
Vishal

Probably you have got it resolved already. The key fields are assigned along with the data fields in the statement RESULT_TABLE[] = G_T_UPDATE_IMAGE.
G_T_UPDATE_IMAGE has the same structure as /BI0/APM_DS0200, which is nothing but the active data table of 0PM_DS02. This structure gets populated in the FM BW_MCI1_KEYFIGURE_ARRAY_GET.

Problems with transfer of archives to calender?

Hi,
Yesterday I tried to order a photo-calendar for next year. It did not succeed - issuing an error at the end of the transfer (I guess it must be there - trouble is that I have no way of knowing).
"An error occurred during transfer of one of your archives. Check network-settings, and click 'Try again' to send the archive again"
I have of course checked network-settings galore and nothing is wrong there. I can print (network-printer), send & receive e-mails, surf, transfer files through FTP and so on and so forth...
I figured that it could be massive load of the servers, but according to the Photo Services status everything seems A-OK. I tried transferring again multiple times yesterday, again this morning, afternoon and evening. Same error - and I am starting to crack...
Trouble is, that I have no (for me known) way to troubleshoot what is going wrong - and in the meantime I am a hostage to iPhoto and all its doing.
Don't get me wrong - I like iPhoto. I have ordered books and calendars before - the previous calendars as soon as on December 6th (order received on the 10th - great!) - with no problems...and now suddenly this??
I have tried all the suggestions from this page: http://support.apple.com/kb/TS2516
...to no avail - I have sent an e-mail to Photo Services - awaiting their answer - maybe some of you have a suggestion or two?
Regards

Additional info - after the calendar has compiled the transfer goes from 0-23 MB (the end-result) within seconds - even though I can see that the transfer is still ongoing due to the traffic on the switch. After some minutes (upload of 768 K (xDSL)) the error is showing and traffic on switch stopping.
One of the suggestions from the support-page is saving the calendar as PDF. This works flawlessly and according to size (22.7 MB) indicates to me, that the actual transfer is something very much alike...

Problems with Transfer Rules

Similar Messages

Maybe you are looking for