Problems with version sets
I have PSE 6. When I open a JPG from the Organizer using Full Edit and then try to save, I do not get the option to save the image in a version set (even though I do have the Organizer option checked). However, I noticed that invoking Full Edit also prompts the Organizer to say there is a new file in the watched folders. This "new" file is the very same file in the very same location. If I accept to add the file to the Organizer I get two thumbnails in the Organizer, both pointing to the same file on disk. If I do this then the "Edit In Progress" banner appears on the "new" thumbnail and the editor does allow me to add the image to the version set. I am sure that I did not have to do this before, I would expect Full Edit to just open the image, mark it in the Organizer as being edited, not try to add it back to the catalog and allow me to save the edit in a version set. What might be causing this behaviour?
I also have similar and I think related problems with RAW images too, but I am hoping that resolving the above will resolve the RAW issue too.
I should have said that I did try that but it still prevented me from creating a new version in a version set when saving. It is as if the editor needs to start on a copy of the Organizer's entry to allow version sets, as if the original is somehow "locked". Could that be possible?
Similar Messages
-
Problem with version sets in Elements 12
I have just started using elelments 12. I have been having problems with inconsistency in forming version sets. Some sets forms as expected. However, quite often after editing, when returning to Organizer the edited picture is not in a version set with the original and in fact is not even visible. I can get to the edited version only through the "Open" tab in the Editor. I have check the appropriate "Save in version set" in the save menu. Suggestions?
Seems you have the same problem :
http://forums.adobe.com/thread/1309160?start=0&tstart=0
The source of the problem is not clearly found today. It seems that happens on previously converted catalogs.
A workaround seems to have been found : killing the autoanalyzer.exe process in the task manager. -
Photoshop Elements 13 (Mac) Organizer - Can't save file with version sets.
I have spent many hours now trying to get Elements Organizer to save Version Sets when I've edited a photo. I've tried more or less every little thing you can find online without any luck. But just moments ago I found that if I move the file to my desktop everything works just fine. I then tried to edit files in a few other folders (also imported to my Organizer) and found that when ever the folder was named to something with a nordic letter in it (å, ä, ö) then I couldn't save my file with version sets (option greyed out) but if I moved that same file to another folder, well then everything worked as it's suposed to.
I'm using the trial version of PSE 13 for Mac (Yosemite) and the full version is ordered and on it's way. But if this problem can't be fixed, I need to return that order and buy some other photo editing program.
Can anyone help me with this problem? Is there perhaps a solution to this?
Please, any help is much appreciated!I'm using the English version (as more or less always - Swedish is rarely an option). The thing is that I have never encountered this problem before in any other software I've been using, and certainly not in Aperture that I've been using up until now.
I name my photo folders with a date and a few words, for ex. "2014-12-31 New Years in Stockholm" (but I normally write in Swedish). I use this method so that my folder that contains the original photos will be easy to find in even without any other software than Finder (or Windows Explorer if I connect my external drive to a Windows machine). I could change the name of all of my folders, or at least all of the folders with a name containing one or more of the letters Å, Ä or Ö to "force" PSE to work as it should, but why? This really shouldn't be a problem.
I was hoping that their was a simple option or something like that that could fix this issue, but I guess not.
If this problem lies in the software itself I will have to return it and look elsewhere (but where? Lightroom is certainly not an option if Adobe can't handle "normal" letters and Aperture is discontinued in a few months).
Thank you for your reply! -
Hi all ,
I am facing a problem with subform set. When i use two subform sets with same set of conditions in a form, only the first subform set works while the second one does nothing. Did any of you faced the same problem ? If so Please let me know the solution you came up with. Thanks.
SrPrabhuHi scott,
The problem is with subform set and not subform. In subform set, we can give conditions to make only one subform visible at a time that satisfies the condition. First create a subform set having more than one subform. Now apply the conditions to that subform set. Check if it works. I m sure it wil work. Now just make a duplicate copy of the same subform set. Place it in the same form so that now two subform sets are available. Now preview the form. U wil fine only one subform set working and the other one doesnt.
We can use any number of subform set within a form. If different conditions are applied to each subform set , it works fine.
i wonder now wat wud u do in case if we are in need of two subformset having the same condition in a form ?
Thanks,
Sr Prabhu -
Anybody has a problem with version 8.1.3 (12B466)?
Anybody has problems with version 8.1.3 (12B466)?
Any suggestions?
My iphone 5 keeps restartingNo problems here. Maybe it was a bad update.
I assume you have either an iTunes or iCloud backup.
Connect to iTunes on your computer and restore iOS.
This will download (if necessary) and reinstall iOS. After it finishes, go through the setup process and restore from your backup. -
Weird Problem with FSB setting
Hi all,
I've just come across a weird problem with FSB setting.
If I set FSB to 229 my machine runs @ 1.6Ghz only.
When I set to 230 it runs @ 3.2Ghz (as it should).
Any ideas what could be causing this?
Thanks
MickIf FSB @ =
Strange thing.. What a magical 1MHz -
Problems using version set in Elements 9
Hi!
I have problems using the version set. When saving files in the Element 9 editor I can not mark the "version set" option, its not highlighted and not possible to mark or use. Is there a basic setting that I´m missing or??? I have the MAC version of Elements.
Also I have noticed that when I have edited a file in the Elements 9 editor and I come back to the Organizer the editor have changed the time of the photo? This means that its rather difficult to find the photo in the Organiser. It often change the time 1 or 2 hours.
As I cant use the version set I can not keep my tags on the edited pictures. Is there a setting for keeping the tags and catalogue belongings to a edited file?
As of today this software makes no sense to me and I can basically not keep working with it as it does not support basic functionality that I´m dependent on.
Best Re
AI’m not seeing this in my own version sets in PSE9; when I expand the set every image has the same date and time under each thumbnail.
I’m wondering if you have used the “save for web” command at some point, which
wipes all EXIF metadata, including the date & time of the original - in order to optimize the image for display on the internet. So if you have imported such an image Elements has to make an estimate. Apart from this known scenario I can’t really explain what’s going on. -
Problem with fingerprint setting
Hey, i bought an iphone 5s yesterday. I set up the fingerprint yesterday and it worked fine. But after that i faced some problem with the system so i reset the wholephone and edit and deleted my original fingerprint. but after that, my phone cant reenter the fingerprint. it can't read any fingerprint and the name is changed to touch id. what should i do with it?
Hello annteoeena,
Congratulations on your iPhone 5s, and thank you for the details of the issue you are experiencing when using Touch ID. I recommend following the steps below for an issue like the one you described:
Troubleshooting Touch ID
Verify that you are using the latest version of iOS.
Ensure that your fingers and the Home button are clean and dry.*
Note: Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning.
Tap Settings > General > Passcode & Fingerprint > Fingerprints and verify:
Passcode Unlock or iTunes & App Store is enabled.
One or more fingerprints have been enrolled.
If one finger isn't working, tap Edit in Settings > General > Passcode & Fingerprint > Fingerprints > Edit to delete and then reenroll the finger.
If that finger still isn't working, try enrolling a different finger.
If you are unable to enroll any of your fingers, take your iPhone 5s to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for further assistance.
Find the full article here:
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Problem with version enabling tables with ric.
Hello,
i have the a problem when i want to version enable tables having ref. int. constraits having delete rule cascade or set null.
Is it possible that i can't version enable the tables because of these constraints? How i could solve this problem if i want to keep the delete rule?
thanks,
Orsi GyulaiHi,
We are internally creating a <table_name>_g procedure that transfers privileges to the necessary users. If you have a table with that name, it would explain the error.
When using ignore_last_error, it will skip the statement that is selected from the all_wm_vt_errors view. Sometimes, the statement can be safely skipped, while in other cases it cannot be. This procedure will always eventually complete when it is repeatedly called with ignore_last_error set to true. However in doing so, some required objects or privileges may not exist or be in an invalid state.
In your case, you most likely had to skip the 3 or so statements that dealt with the <table_name>_g procedure. Typically, these statements should not be skipped, but you may or may not see a problem with it due to a number of factors.
The best course of action may be to drop the trigger in a beginDDL/commitDDL session, and then recreate it in a separate session. Of course, only do this after renaming the <table_name>_g table that you have. Unfortunately, there is currently no way of getting around this naming convention.
Thanks,
Ben -
Problem with character set UTF-16 LE
Hello.
There were difficulties with character set change, using function convert ()
The matter is that in the list v$nls_valid_values the character set AL16UTF16LE does not appear, during too time the inquiry is successfully carried out
convert ([some-national-characters], ' CL8MSWIN1251 ', ' AL16UTF16LE ').
But at giving on an input of the data stored in CLOB, there is an error "a character set is not supported"
What are possible ways of the decision of a problem?You can try to use DBMS_LOB. SUBSTR to access LOB data like in the following example:
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> declare
2 v_i clob;
3 v_o clob;
4 begin
5 v_i := 'a';
6 v_o:=convert(dbms_lob.substr(v_i,1,1),'AL16UTF16LE', 'CL8MSWIN1251');
7 end;
8 /
PL/SQL procedure successfully completed. -
Problem with layer sets opening
Hi,
I have a problem open layer sets. In my script I get layers index and then iterate throught this layers.
Here is the script:
function getAllLayersByIndex(){
function getNumberLayers(){
var ref = new ActionReference();
ref.putProperty( charIDToTypeID("Prpr") , charIDToTypeID("NmbL") )
ref.putEnumerated( charIDToTypeID("Dcmn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
return executeActionGet(ref).getInteger(charIDToTypeID("NmbL"));
function hasBackground() {
var ref = new ActionReference();
ref.putProperty( charIDToTypeID("Prpr"), charIDToTypeID( "Bckg" ));
ref.putEnumerated(charIDToTypeID( "Lyr " ),charIDToTypeID( "Ordn" ),charIDToTypeID( "Back" ))//bottom Layer/background
var desc = executeActionGet(ref);
var res = desc.getBoolean(charIDToTypeID( "Bckg" ));
return res
function getLayerType(idx,prop) {
var ref = new ActionReference();
ref.putIndex(charIDToTypeID( "Lyr " ), idx);
var desc = executeActionGet(ref);
var type = desc.getEnumerationValue(prop);
var res = typeIDToStringID(type);
return res
function getLayerVisibilityByIndex( idx ) {
var ref = new ActionReference();
ref.putProperty( charIDToTypeID("Prpr") , charIDToTypeID( "Vsbl" ));
ref.putIndex( charIDToTypeID( "Lyr " ), idx );
return executeActionGet(ref).getBoolean(charIDToTypeID( "Vsbl" ));;
var cnt = getNumberLayers()+1;
var res = new Array();
if(hasBackground()){
var i = 0;
}else{
var i = 1;
var prop = stringIDToTypeID("layerSection");
for(i;i<cnt;i++){
var temp = getLayerType(i,prop);
if(temp != "layerSectionEnds") res.push(i);
return res;
function getLayerVisibilityByIndex( idx ) {
var ref = new ActionReference();
ref.putProperty( charIDToTypeID("Prpr") , charIDToTypeID( "Vsbl" ));
ref.putIndex( charIDToTypeID( "Lyr " ), idx );
return executeActionGet(ref).getBoolean(charIDToTypeID( "Vsbl" ));
function makeActiveByIndex( idx, visible ){
var desc = new ActionDescriptor();
var ref = new ActionReference();
ref.putIndex(charIDToTypeID( "Lyr " ), idx)
desc.putReference( charIDToTypeID( "null" ), ref );
desc.putBoolean( charIDToTypeID( "MkVs" ), visible );
executeAction( charIDToTypeID( "slct" ), desc, DialogModes.NO );
var groups = getAllLayersByIndex();
for(var i = groups.length-1; i >= 0 ; i--) {
makeActiveByIndex( groups[i], true );
....working with layers....
I think, my problem is in function makeActiveByIndex, because it doesn't make active a folder and doesn't open it.
You can see it on this picture. Active layer set is "Skupina 1" and it is in layer set "hlavicka". But "hlavicka" is not open. WHY??
Can you help me fix this problem??
Thank you DomaneniHi, for the past days I've worked on a script to toogle opening and closing layeSets, I've taken the code that TeddyBear posted here: http://ps-scripts.com/bb/viewtopic.php?p=14773 and adjusted it a little bit, and that's what I came up with, I hope it will help you:
<javascriptresource>
<name>BCM> ToogleOpen_CloseGroup...</name>
<category>BCM</category>
</javascriptresource>
//For code readability
// http://ps-scripts.com/bb/viewtopic.php?f=9&t=3235
function getActiveLayerIndex() {
var ref = new ActionReference();
ref.putProperty( charIDToTypeID("Prpr") , charIDToTypeID( "ItmI" ));
ref.putEnumerated( charIDToTypeID("Lyr "), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
return executeActionGet(ref).getInteger(charIDToTypeID( "ItmI" ));
function cTID(s){return charIDToTypeID(s)}
function sTID(s){return stringIDToTypeID(s)}
// =============================
// The main function
function closeGroup(layerSet) {
var m_Name = layerSet.name;
var m_Opacity = layerSet.opacity;
var m_BlendMode = layerSet.blendMode;
var m_LinkedLayers = layerSet.linkedLayers;
var currINDEX = getActiveLayerIndex();
var m_bHasMask = hasLayerMask();
if(m_bHasMask) loadSelectionOfMask();
if(layerSet.layers.length <= 1) {
addTempLayerSetIn(currSetIDX-1);
makeActiveByIndex(currSetIDX+2, false);
ungroup();
groupSelected(m_Name);
deleteTempLayerSetbyIdx(currSetIDX+1);
} else {
makeActiveByIndex(currSetIDX, false);
ungroup();
groupSelected(m_Name);
var m_Closed = activeDocument.activeLayer;
m_Closed.opacity = m_Opacity;
m_Closed.blendMode = m_BlendMode;
for(x in m_LinkedLayers) {
if(m_LinkedLayers[x].typename == "LayerSet")
activeDocument.activeLayer.link(m_LinkedLayers[x]);
if(m_bHasMask) maskFromSelection();
return m_Closed;
// =============================
// Below are all necessary subroutines for the main function to work
function ungroup() {
var m_Dsc01 = new ActionDescriptor();
var m_Ref01 = new ActionReference();
m_Ref01.putEnumerated( cTID( "Lyr " ), cTID( "Ordn" ), cTID( "Trgt" ) );
m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
try {
executeAction( sTID( "ungroupLayersEvent" ), m_Dsc01, DialogModes.NO );
} catch(e) {}
function addLayer() {
var m_ActiveLayer = activeDocument.activeLayer;
var m_NewLayer = activeDocument.layerSets.add();
m_NewLayer.move(m_ActiveLayer, ElementPlacement.PLACEBEFORE);
return m_NewLayer;
function hasLayerMask() {
var m_Ref01 = new ActionReference();
m_Ref01.putEnumerated( sTID( "layer" ), cTID( "Ordn" ), cTID( "Trgt" ));
var m_Dsc01= executeActionGet( m_Ref01 );
return m_Dsc01.hasKey(cTID('Usrs'));
function activateLayerMask() {
var m_Dsc01 = new ActionDescriptor();
var m_Ref01 = new ActionReference();
m_Ref01.putEnumerated( cTID( "Chnl" ), cTID( "Chnl" ), cTID( "Msk " ) );
m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
try {
executeAction( cTID( "slct" ), m_Dsc01, DialogModes.NO );
} catch(e) {
var m_TmpAlpha = new TemporaryAlpha();
maskFromSelection();
activateLayerMask();
m_TmpAlpha.consume();
function deleteMask(makeSelection) {
if(makeSelection) {
loadSelectionOfMask();
var m_Dsc01 = new ActionDescriptor();
var m_Ref01 = new ActionReference();
m_Ref01.putEnumerated( cTID( "Chnl" ), cTID( "Ordn" ), cTID( "Trgt" ) );
m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
try {
executeAction( cTID( "Dlt " ), m_Dsc01, DialogModes.NO );
} catch(e) {}
function selectLayerMask() {
var m_Dsc01 = new ActionDescriptor();
var m_Ref01 = new ActionReference();
m_Ref01.putEnumerated(cTID("Chnl"), cTID("Chnl"), cTID("Msk "));
m_Dsc01.putReference(cTID("null"), m_Ref01);
m_Dsc01.putBoolean(cTID("MkVs"), false );
try {
executeAction(cTID("slct"), m_Dsc01, DialogModes.NO );
} catch(e) {}
function loadSelectionOfMask() {
selectLayerMask();
var m_Dsc01 = new ActionDescriptor();
var m_Ref01 = new ActionReference();
m_Ref01.putProperty( cTID( "Chnl" ), cTID( "fsel" ) );
m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
var m_Ref02 = new ActionReference();
m_Ref02.putEnumerated( cTID( "Chnl" ), cTID( "Ordn" ), cTID( "Trgt" ) );
m_Dsc01.putReference( cTID( "T " ), m_Ref02 );
try {
executeAction( cTID( "setd" ), m_Dsc01, DialogModes.NO );
} catch(e) {}
function maskFromSelection() {
if(!hasLayerMask()) {
var m_Dsc01 = new ActionDescriptor();
m_Dsc01.putClass( cTID( "Nw " ), cTID( "Chnl" ) );
var m_Ref01 = new ActionReference();
m_Ref01.putEnumerated( cTID( "Chnl" ), cTID( "Chnl" ), cTID( "Msk " ) );
m_Dsc01.putReference( cTID( "At " ), m_Ref01 );
m_Dsc01.putEnumerated( cTID( "Usng" ), cTID( "UsrM" ), cTID( "RvlS" ) );
try {
executeAction( cTID( "Mk " ), m_Dsc01, DialogModes.NO );
} catch(e) {
activeDocument.selection.selectAll();
maskFromSelection();
} else {
if(confirm("Delete existing mask?", true, "Warning")) {
activateLayerMask();
deleteMask();
function groupSelected(name) {
var m_Dsc01 = new ActionDescriptor();
var m_Ref01 = new ActionReference();
m_Ref01.putClass( sTID( "layerSection" ) );
m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
var m_Ref02 = new ActionReference();
m_Ref02.putEnumerated( cTID( "Lyr " ), cTID( "Ordn" ), cTID( "Trgt" ) );
m_Dsc01.putReference( cTID( "From" ), m_Ref02 );
var m_Dsc02 = new ActionDescriptor();
m_Dsc02.putString( cTID( "Nm " ), name);
m_Dsc01.putObject( cTID( "Usng" ), sTID( "layerSection" ), m_Dsc02 );
executeAction( cTID( "Mk " ), m_Dsc01, DialogModes.NO );
return activeDocument.activeLayer;
function addToSelection(layerName) {
var m_Dsc01 = new ActionDescriptor();
var m_Ref01 = new ActionReference();
m_Ref01.putName( cTID( "Lyr " ), layerName );
m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
m_Dsc01.putEnumerated( sTID( "selectionModifier" ), sTID( "selectionModifierType" ), sTID( "addToSelection" ) );
m_Dsc01.putBoolean( cTID( "MkVs" ), false );
try {
executeAction( cTID( "slct" ), m_Dsc01, DialogModes.NO );
} catch(e) {}
function TemporaryAlpha() {
activeDocument.selection.store((this.alpha = activeDocument.channels.add()));
activeDocument.selection.deselect();
this.consume = function() {
activeDocument.selection.load(this.alpha);
this.alpha.remove();
function makeActiveByIndex( idx, visible ){
if( idx.constructor != Array ) idx = [ idx ];
for( var i = 0; i < idx.length; i++ ){
var desc = new ActionDescriptor();
var ref = new ActionReference();
ref.putIndex(charIDToTypeID( 'Lyr ' ), idx[i])
desc.putReference( charIDToTypeID( 'null' ), ref );
if( i > 0 ) {
var idselectionModifier = stringIDToTypeID( 'selectionModifier' );
var idselectionModifierType = stringIDToTypeID( 'selectionModifierType' );
var idaddToSelection = stringIDToTypeID( 'addToSelection' );
desc.putEnumerated( idselectionModifier, idselectionModifierType, idaddToSelection );
desc.putBoolean( charIDToTypeID( 'MkVs' ), visible );
executeAction( charIDToTypeID( 'slct' ), desc, DialogModes.NO );
function deleteActiveLayer(){
// =======================================================
var idDlt = charIDToTypeID( "Dlt " );
var desc752 = new ActionDescriptor();
var idnull = charIDToTypeID( "null" );
var ref529 = new ActionReference();
var idLyr = charIDToTypeID( "Lyr " );
var idOrdn = charIDToTypeID( "Ordn" );
var idTrgt = charIDToTypeID( "Trgt" );
ref529.putEnumerated( idLyr, idOrdn, idTrgt );
desc752.putReference( idnull, ref529 );
executeAction( idDlt, desc752, DialogModes.NO );
function isLayerSet( idx ) {
var propName = stringIDToTypeID( 'layerSection' );
var ref = new ActionReference();
ref.putProperty( charIDToTypeID( "Prpr" ) , propName);
ref.putIndex( charIDToTypeID ( "Lyr " ), idx );
var desc = executeActionGet( ref );
var type = desc.getEnumerationValue( propName );
var res = typeIDToStringID( type );
// alert(res);
return res == 'layerSectionStart' ? true:false;
function openGroup1(theGroup) {
currSetIDX= getActiveLayerIndex();
if(isLayerSet( currSetIDX ))
getNamesPlusIDsOfLayerSet();
makeActiveByIndex(currSetIDX, false);
function getNamesPlusIDsOfLayerSet(){
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
var count = executeActionGet(ref).getInteger(charIDToTypeID('Cnt '));
var parId = executeActionGet(ref).getInteger(stringIDToTypeID( 'layerID' ));
var Names=[];
var x = 0;
var y = 0;
var r = 0;
currINDEX = getActiveLayerIndex();
var i = currINDEX;
for(i; i > 0 ; i--){
ref = new ActionReference();
ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
var desc = executeActionGet(ref);
var layerName = desc.getString(charIDToTypeID( 'Nm ' ));
var Id = desc.getInteger(stringIDToTypeID( 'layerID' ));
var ls = desc.getEnumerationValue(stringIDToTypeID("layerSection"));
ls = typeIDToStringID(ls);
// alert(layerName+": _ :"+ls);
if(ls == "layerSectionStart"){x++};
if(layerName.match(/^<\/Layer group/) )
y ++;
r = x - y;
if(r == 0 && ls == "layerSectionEnd"){break};
continue
if(ls == "layerSectionContent"){makeActiveByIndex(i,false);break};
var layerType = typeIDToStringID(desc.getEnumerationValue( stringIDToTypeID( 'layerSection' )));
var isLayerSet =( layerType == 'layerSectionContent') ? false:true;
Names.push([[Id],[layerName],[isLayerSet]]);
return Names;
function getLayersNb()//function to find out if the number of layers in the document
var ref = new ActionReference();
ref.putProperty( charIDToTypeID( 'Prpr' ), stringIDToTypeID('numberOfLayers') );
ref.putEnumerated( charIDToTypeID( "Dcmn" ), charIDToTypeID( "Ordn" ), charIDToTypeID( "Trgt" ) );
var desc = executeActionGet(ref);
var numberOfLayers = desc.getInteger(stringIDToTypeID('numberOfLayers'));
return numberOfLayers;
function toogleOpenCloseSet(){
myALayerIDX = getActiveLayerIndex();
myGroupP = app.activeDocument.activeLayer;
if(!isLayerSet(myALayerIDX)){
myGroupP = app.activeDocument.activeLayer.parent;
if(myGroupP.typename != "Document"){
if(isSetOpened1(myGroupP)){closeGroup(myGroupP)}else{openGroup1(myGroupP)};
}else{
if(isSetOpened1(myGroupP)){closeGroup(myGroupP)}else{openGroup1(myGroupP)};
function getFristLayerSetChildVisible(){
xx = false;
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
var count = executeActionGet(ref).getInteger(charIDToTypeID('Cnt '));
var parId = executeActionGet(ref).getInteger(stringIDToTypeID( 'layerID' ));
var Names=[];
var x = 0;
var y = 0;
var r = 0;
currINDEX = getActiveLayerIndex();
var i = currINDEX;
for(i; i > 0 ; i--){
ref = new ActionReference();
ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
var desc = executeActionGet(ref);
var layerName = desc.getString(charIDToTypeID( 'Nm ' ));
var Id = desc.getInteger(stringIDToTypeID( 'layerID' ));
var ls = desc.getEnumerationValue(stringIDToTypeID("layerSection"));
ls = typeIDToStringID(ls);
var vis = desc.getInteger(stringIDToTypeID( 'visible' ));
// alert(layerName+": _ :"+vis);
/* if(desc.hasKey(stringIDToTypeID("visible")))
alert(desc.getType(stringIDToTypeID("visible")));
if(ls == "layerSectionStart"){x++};
if(vis == 1 && Id!=parId && r!=0){
var theOBj = {id:Id, lname:layerName, idx:i};
xx =true;
Names.push(theOBj);
break;
if(layerName.match(/^<\/Layer group/) )
y ++;
r = x - y;
if(r == 0 && ls == "layerSectionEnd"){break};
continue
return Names;
function getLastChildIdx(){
xx = false;
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
var count = executeActionGet(ref).getInteger(charIDToTypeID('Cnt '));
var parId = executeActionGet(ref).getInteger(stringIDToTypeID( 'layerID' ));
currINDEX = getActiveLayerIndex();
var i = currINDEX;
var x = 0;
var y = 0;
var r = 0;
var lastChIdx = 0;
for(i; i > 0 ; i--){
ref = new ActionReference();
ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
var desc = executeActionGet(ref);
var layerName = desc.getString(charIDToTypeID( 'Nm ' ));
var Id = desc.getInteger(stringIDToTypeID( 'layerID' ));
var ls = desc.getEnumerationValue(stringIDToTypeID("layerSection"));
ls = typeIDToStringID(ls);
var vis = desc.getInteger(stringIDToTypeID( 'visible' ));
if(ls == "layerSectionStart"){x++};
if(layerName.match(/^<\/Layer group/) )
y ++;
r = x - y;
if(r == 0 && ls == "layerSectionEnd")
lastChIdx = i;
break;
// alert(x+" _ "+y+" _ "+r+" _ "+layerName);
return lastChIdx;
function getNbOfChilds(){
xx = false;
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
var count = executeActionGet(ref).getInteger(charIDToTypeID('Cnt '));
var parId = executeActionGet(ref).getInteger(stringIDToTypeID( 'layerID' ));
currINDEX = getActiveLayerIndex();
var i = currINDEX;
var nb = 0;
var x = 0;
var y = 0;
var r = 0;
for(i; i > 0 ; i--){
ref = new ActionReference();
ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
var desc = executeActionGet(ref);
var layerName = desc.getString(charIDToTypeID( 'Nm ' ));
var Id = desc.getInteger(stringIDToTypeID( 'layerID' ));
var ls = desc.getEnumerationValue(stringIDToTypeID("layerSection"));
ls = typeIDToStringID(ls);
var vis = desc.getInteger(stringIDToTypeID( 'visible' ));
if(ls == "layerSectionStart"){x++};
if(layerName.match(/^<\/Layer group/) )
y ++;
r = x - y;
if(r == 0 && ls == "layerSectionEnd")
break
continue
nb++;
return nb;
function isSetOpened1( group ){
app.activeDocument.activeLayer = group;
xx = true;
currSetIDX = getActiveLayerIndex();
addTempLayerSetIn(currSetIDX-1);
var fIdx = getActiveLayerIndex();
makeActiveByIndex(currSetIDX+2, false);
if(fIdx == getActiveLayerIndex())
xx = false;
deleteTempLayerSetbyIdx(currSetIDX+1);
return xx;
function addTempLayerSetIn(idxx){
// =======================================================
var idMk = charIDToTypeID( "Mk " );
var desc58 = new ActionDescriptor();
var idnull = charIDToTypeID( "null" );
var ref63 = new ActionReference();
var idlayerSection = stringIDToTypeID( "layerSection" );
ref63.putClass( idlayerSection );
desc58.putReference( idnull, ref63 );
executeAction( idMk, desc58, DialogModes.NO );
// =======================================================rename
var idsetd = charIDToTypeID( "setd" );
var desc202 = new ActionDescriptor();
var idnull = charIDToTypeID( "null" );
var ref209 = new ActionReference();
var idLyr = charIDToTypeID( "Lyr " );
var idOrdn = charIDToTypeID( "Ordn" );
var idTrgt = charIDToTypeID( "Trgt" );
ref209.putEnumerated( idLyr, idOrdn, idTrgt );
desc202.putReference( idnull, ref209 );
var idT = charIDToTypeID( "T " );
var desc203 = new ActionDescriptor();
var idNm = charIDToTypeID( "Nm " );
desc203.putString( idNm, "mb-dummy tempTestLayerSetOpen_Closed" );
var idLyr = charIDToTypeID( "Lyr " );
desc202.putObject( idT, idLyr, desc203 );
executeAction( idsetd, desc202, DialogModes.NO );
// =======================================================move
var idmove = charIDToTypeID( "move" );
var desc59 = new ActionDescriptor();
var idnull = charIDToTypeID( "null" );
var ref64 = new ActionReference();
var idLyr = charIDToTypeID( "Lyr " );
var idOrdn = charIDToTypeID( "Ordn" );
var idTrgt = charIDToTypeID( "Trgt" );
ref64.putEnumerated( idLyr, idOrdn, idTrgt );
desc59.putReference( idnull, ref64 );
var idT = charIDToTypeID( "T " );
var ref65 = new ActionReference();
var idLyr = charIDToTypeID( "Lyr " );
ref65.putIndex( idLyr, idxx );
desc59.putReference( idT, ref65 );
var idAdjs = charIDToTypeID( "Adjs" );
desc59.putBoolean( idAdjs, false );
var idVrsn = charIDToTypeID( "Vrsn" );
desc59.putInteger( idVrsn, 5 );
executeAction( idmove, desc59, DialogModes.NO );
function deleteTempLayerSetbyIdx(idxx){
// =======================================================
var idDlt = charIDToTypeID( "Dlt " );
var desc = new ActionDescriptor();
var ref = new ActionReference();
ref.putIndex(charIDToTypeID( 'Lyr ' ), idxx);
// ref.putIdentifier(charIDToTypeID( 'Lyr ' ), idxx);
desc.putReference( charIDToTypeID( 'null' ), ref );
executeAction( idDlt, desc, DialogModes.NO );
toogleOpenCloseSet(); -
Problem with Versions/Auto Save
Something is awfully wrong with Versions on my system. To note, this happened AFTER the 10.7.1 update, but I can't say whether it happened DIRECTLY after the update.
I've already repaired disk permissions using the Recovery Disk.
Here's the problem: on some files (locked or unlocked, by the way) when viewing older versions it doesn't show any preview of the file on the right side -- it's just empty space! When attempting to restore the file it gives the error:
"Unable to revert because an error occurred while trying to open this file's backup version."
Other files would take an eternity to restore -- or even to simply VIEW back versions. It'll give me the spinning beachball of death and after a force quit, the file would be hopelessly corrupted, giving me the error:
"The document xxxxx could not be read. The document does not have a valid format."
Christ.
Even newly-created files sare displaying this problem. I created one just now and it gets stuck on "Retrieving Backup versions from TIME MACHINE"
TIME MACHINE???? I don't USE it! WHERE and WHO gave TM authority to run 'in the background'? That said -- why is it acting funny just NOW? I've turned it off from the beginning and never touched it since. NOW it decides the wreak havoc on my system?
Anyone else having these problems??Hi Tobias,
Can u just tell us how did u find ur solution..
Thanks & Regards
Sankalp -
Problem with character set - Reports 11.1.1.4
Hi!
I have a problem with Oracle Reports 11g regarding character set configuration. The default character set WE8ISO8859P1 works, so PDF reports have a regular display except for Eastern European (EE) letters which are replaced by "¿" sign.
So, when I set any other character set in reports.sh, which would be a normal step to get EE letters, I'm always getting Greek Alphabet in PDF reports. Why Greek Alphabet?
The character sets I tried to use are: EE8ISO8859P2, UTF8 and AL32UTF8.
I changed uifont.ali and included PDF Subset with all four Arial font variants and, of course, I placed all fonts in fonts folder which is pointed by REPORTS_FONT_DIRECTORY.
In Reports Builder everything works fine, but when I have to deploy the report to the Reports Services, the problem occurs.
Also, when I've tried to execute PDF report using In-Process Reports Server (rep_wls_reports_hostnameasinst1) instead of AS Instance Reports Server (RptSvr_hostnameasinst1, which is a regular server), I'm getting Greek Alphabet in PDF reports even if the default character set is WE8ISO8859P1 in reports.sh. What is wrong with it? Where is Greek Alphabet configured?
The production environment is 64-bit Oracle Linux 5.6 with Weblogic 10.3.4 and Forms&Reports 11.1.1.4. Forms works fine with character set EE8ISO8859P2 defined in default.env file.
Thanks in advance!
Regards,
DejanThank you, Denis!
Doc 300416.1 was very useful but Note 356221.1 - A Practical Methodology on Porting Reports from Windows to Unix with Different Font is actually crucial for configuring Reports on Linux.
Also, there is a bug in 11.1.1.3 and 11.1.1.4, which can be fixed using the patch ( Note 1138405.1 - PDF Reports With Font Subsetting Raises Error "Bad /Bbox" on 64-Bit Linux ).
Kind regards! -
How do I eliminate the black blotches associated with version sets.
I have just had to reload Elements 6. Now I find that a lot of my people images carry version sets and show large black blotches usualy around the eye area. Could someone tell me how to avoid and eliminate them. It can be achoieved by deleting some of the sets but I would like to know why theu have suddenlt apperaer after a reload and how to avoid the in the future.
thanksGo back and check the preferences again. It may be (not sure) that you need to turn it off in the downloader first, then in the main preferences, but it should be sticky once you get it all disabled.
On newly imported photos, you can fix things by just selecting the whole batch then going to Edit>Version set>Revert to original to get rid of the version with the black spots. -
Since I installed the Itunes 11 version I can no longer print a jewelcase (Cd) and after burning a cd teherie is no index that can be read on the cd...
I know that these two things were abolutely no problem with the version number 10... So who can help me ? Apple ? Thanks !!!Check for a device driver update for your display adapter; see http://forums.adobe.com/thread/945765
Maybe you are looking for
-
Having a problem with drawImage() and dont know why...
OK, I'm having some problems drawing my image onto the frame.. It will let me draw string, add components, etc.. but as soon as it come to trying to draw an image it just doesn't wanna.. Here is my code: import java.awt.*; public class Messenger exte
-
How do i copy Illustrator from one computer to another when it came on a computer we purchased
My family purchased a computer and it came with Illustrator and Photoshop. It is my daughter's computer, but I am the graphic designer, so I tried to copy the programs from her MacBook Pro to mine, but I wasn't able to open them. Does anyone have adv
-
Customer Material Infomation Missing
**Hello Friends,** **We have a scenario where we create Delivery without Referance to an Order and in the Invoice we see that Customer Material Information is not getting copied.In the Billing i see that it is taking referance from VBAP Table but in
-
Video FX- fast/ reverse/ slow problems?
Why is it that when i slow down the speed of a clip, it seems to jitter/ shake just a bit? Is that how it is supposed to happen.. Shouldnt the movement be smooth? Thanks!
-
Hello, I own a MSI P6NGM-FIH mainboard since some weeks, without problems. Today I got a brand new MSI N9500GT-MD512Z graphics card. Unfortunatly, the graphics does not function with this board, it boots with the internal mainboard graphic card even