Problems with Vista Drivers on Satellite M100 (PSMA1E)

Hello,
I got Problems with installing the Vista Driver for the Graphic Card and the Realtek Sound Card.
I downloaded the Drivers from the Toshiba-Support Side! The Realtek Driver couldnt be installed because of some missing file! The CCC wouldnt run correct after installation! I got Vista Buisness!
Greets, kalest

I fixed the Sound Problem for myself:
The Realtek Site offers drivers for the HD-Soundchip. I installed them and now i got HD Support on Vista!
The Problem with the Cata.Control Center still exists!
Greets, kalest

Similar Messages

T61 - problem with Vista x64 NVS 140M drivers

Hi!
I have problems with Vista x64 and NVS 140M drivers. Thing is that if I install them, everything will be slideshow, even the audio shutters quite bad and CPU is constantly over 45%. I have tried different driver versions but nothing has helped yet. Any ideas?
I wonder if anyone has the old 7.15.11.0129 driver and could send it to me? Maybe that would help.

Try the following test:
- Go to Vista Sound Control Panel to view the S/PDIF out properties.
- Click on the Supported Format tab page, select Dolby Digital and click Test.
Is the test OK?

Notebook NC6400 HSTNN-C18C problem with grafic drivers

hello i have
NC6400 HSTNN-C18C and i have problem with graphic drivers.i have windows 7 proffesional i found some .but in install has failed installation .i have installed game Farming simulator 15 but i still must install latest graphic drivers.can you send me link where i download drivers thanks for help

Hi,
It's a good machine isn't it. Unfortunately no official support:
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=1848274
Please try:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/compaq-nc6400-drivers-for-windo...
Vista driver on the first link may help.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problem with vista and 5.1

problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]

My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions.

Airport Extreme Utility problem with Vista (works with XP, MacOS)

Hi,
I just setup a new Airport Extreme network at my house, and most things are working fine. I have wirelessly connected at various points an Airport Express (using WDS), a MacBook Pro (OSX) and an IBM Thinkpad. I have several wired machines as well.
My problem: The wired machine I use to configure and setup everything is a Vista Ultimate machine. Unfortunately, the Airport Utility won't connect to the Airport Extreme (or Airport Express for that matter) from Vista. The utility works fine from XP or OSX, but not from Vista. Note that I'm using this in a wired capacity. The Vista machine is directly connected to the Airport Extreme, while several other machine are connected through a GBit switch.
Any help would be much appreciated? Is this a Vista security problem or an Airport Utility problem with Vista?

It's most likely a security issue with Windows Vista. Vista has the ability to set "compatibility modes" for applications.
Try:
1. right mouse clicking the Airport Utility's .exe file.
2. Click the Compatibility tab. Change the Compatibility mode to Windows XP (Service Pack 2).
3. Now go down to "Privilage Level" and check the "Run this program as an administrator"
Apple never tells you this but you must connect to the Airport Extreme wirelessly. Now run the Airport Utility. You should see it.

E7-00 Problem with MTP drivers winXP service pack ...

I have E7-00 and i have a problem with MTP drivers not being installed and constatly showing device is not working properly in device manager.
I have win XP sp3, installed newest Nokia Ovi suite, and my computer is constatly trying to install MTP device drivers, and keeps complaining it cannot.
What should i do.
Cheers
Aleksandar

NOKIA IS NOT LISTENING TO THIS FAILURE, WHY DO WE HAVE THIS FORUM AT ALL WHEN NOBODY HELPS TO SOLVE THIS BUG

Problem with updating bios toshiba satellite l655-s5144

Hello first of all having a good day, four months ago a problem with my laptop toshiba satellite l655-5144 I have something crazy ,happens that when starting Windows 7/8 freezes there and I can not access windows, I thought it was an error of hdd, but I think I'm surprised that it is not, since changing the hdd and still gives the same problem of being paralyzed in Home windows, all this began to update the BIOS to version 2.8 that turned out to be the operating profit that was for windows 8, not sure if this is due to the problem but I've tested the ram, hdd, cpu, etc and everything about the hardware works well and gives no problems, I think that the problem was caused by updating the BIOS to version 2.8, my question is whether you can return to the factory version was 2.2, or at least the previous version to 2.8 which was the one I worked thanks for your answers and spend time helping me, is the agradesco much.
And sorry for my bad English.
Solved!
Go to Solution.

Hello and thank you for coming to see the problem I had with my laptop, that seems to fix the problem so far, I hope q not refreeze operating system again, and I could restore the BIOS to version in which was when purchased.
If anyone has the same problem as I leave then follow these steps:
1.Find BIOS version with which acquired the laptop
2. Use of mnetodo booted by CD.
3. Insert the CD from the boot.
4. Upon resumption of the program ran hidden PC (that I saw no message)
5. After restart, windows restart again and enter the bios to see if it had changed the version of this and it turned out was successful.
Well I hope this problem the laptop again, and thank you for deigning to read at least my problem.
Satellite l655-s5144

Acrobat Problem with Vista X64 OLE calls

Acrobat Problem with Vista X64 OLE calls - CreateObject("AcroExch.AVDoc") does NOT open its window in the CreateObject("AcroExch.App") - but opens a new (invisible) window. Works correctly in XP x64 and 32 bit Vista - happens with Acrobat v8 and v9.

Again, I contend that something changed between 8.1.2 and 8.1.3.
refer to http://www.adobeforums.com/webx/.59b6fe7c
To show the viewer, use the show method after the document is opened.
In 8.1.2 you did not have to perform this extra step.

Downgrade to win7 problem with audio drivers. beats audio software for win7?

I recently purchased the HP Envy 700-074 from best buy. it was necessary to downgrade to windows 7 for some work software and I would like proper audio drivers/software for windows 7. Right now it seems to be detecting as Nvidia audio driver but in this case it doesnt allow my front panel audio ports to output audio. I would also like to have beats working.
here are the hardware ID's associated with the card
HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619&REV_1001
HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619
and here's a quick screenshot of the driver that is associating with it right now..
http://gyazo.com/23499c19d5e2a21f81b9124ad822c07d.png
even those VEN_10DE's seem to associate to nvidia, but from HP the driver is meant to be IDT high definition audio? is something going on here?
the only change i've made to the computer is upgraded to an EVGA Nvidia GT 610 video card.,

Hi, Paul.
I have similar problem here.
I bought HP Envy 810-200nr and I hate W8, so I installed Windows Server 2008 R2, which is my favourite.
Then I solved numerous problems with chipset drivers and finally it all works, but Audio (IDT HD Audio) does not work.
Completely silent.
HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3&REV_1001
HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3
It looks okay, when playing audio - indicator blinks and shows level, volume can be adjusted, all parametrers - speakers, etc seems okay but silent!
I tried numerous drivers for W8 and W7 64 but they give "Incompatible version" error.
Can you advise me what to do? I really want WS2008R2 here, but this audio is weird..

Problems with graphics drivers

Hello, I tried to install new drivers to my Ati 6770m (2gb) and there is a problem with almost every driver. For example the newest ati catalyst 14.5 beta. When the driver is installed, I can't switch to the resolution higher than 1024x768. Ati catalyst control centre is not installed or I there is an error message saying, that the driver is not installed correctly so the control centre can't open. Sometimes the system crashes to the blue screen and I have to reboot. I see this problem with various drivers. The only driver, that is working for me is Ati Catalyst 13.10 mobility beta. And with this driver there's a lot of graphic problems with GTA V. I see squares on all objects in distance when dx11 and AA is turned on. It is unplayable with this driver. Please help.

Hey @Tommy2220 ,
Thanks for the additional information. If you uninstall all that you have in the graphic drivers section of the Device manager, including the drivers that are present. Restart the Notebook, and download from here. You will only need AMD/Intel Switchable High-Definition (HD) Graphics Driver, it includes everything you will need.
You can also find them , here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system.
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Problems with ATI drivers and gnome3?

I've tried to install gnome3 off of the gnome-unstable repo (sudo pacman -S gnome-unstable/gnome gnome-unstable/gdm I'm assuming that's the proper command). However, when GDM starts, my screen just flashes a cursor, goes blank, turns off, and repeats. Is there a problem with ATI drivers or is the package just not working at all right now?

I'm also having troubles with Catalyst and gnome3 (I'm ussually in i3 btw) just playing with it tho. Seems to detect my graphics as 'VESA: JUNIPER" which probably means it's using some sort of fallback, eitherway it's not very functional and messes with my X server a bit
EDIT: I can get into gnome, but there's a lot of flickering doing anything, should proabaly check for bugs on their tracker
EDIT2: https://bbs.archlinux.org/viewtopic.php … 89#p913189 <--- looks like that might be gaining some traction, something to watch
EDIT3: This bug and This Bug might be relevent, not too recent tho
And another one
so yeah..... ATI
Last edited by jmad980 (2011-04-07 07:37:21)

T500 Problem with video drivers with Vista 32 / 64 bits

Hi,
I tried to reinstall Vista on my T500 (2650-A29), I had Vista 32 bits, and I tried to install Vista 64 bits.
After installing everything, my video card (Radeon HD 3650) has an error with its drivers. Windows can't load the drivers.
I installed those drivers: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70417
After rebooting, there's still an error, I can make it work by uninstalling the drivers for my video card and reloading. It will install drivers, and switch to the ATI video card.
But, if I connect to an external display, I have a blue screen...
Then, if I reboot, my drivers are still erroneous... And Windows still can't load the drivers.
I retried to reinstall all my system, this time I used the ThinkVantage System Update for installing everything. But I still get the same error and windows can't load the drivers.
Then, I retried to reinstall all my system but with Vista 32 bits, thinking it was an issue with 64 bits, but I am now under Vista 32bits, and my video card drivers still can't load!
I don't know what else to do...
Thanks for your help and sorry for my English, I hope it's understandable.
Cordially,

Nobody ?

Satellite P100-434: Wireless connection problem with Vista

Just purchased this laptop with Vista and so far have been unable to get the wireless to connect, I have 3 other computers and they will all connect, I have reset the router and set new accounts on all the other computers with no problem, but unable to do this on the P100.
Tried the new RADAR feature and this will not pick any networks up, but when trying to establish new connection it shows that a wireless network is available but is unnamed, although my network is named, I have taken the passkey off the network so that it is open but still will not connect into it, LAN via ethernet works fine.
Wireless switch is on, but when I slide it to off wireless switch status says ON

Hi
I cannot give you an exactly answer why you cannot connect to you WLan with the Vista because there are so many options which must be checked.
But I think you will find the solution yourself with a little help from Microsoft website.
Please check this site:
Connecting to Wireless Networks with Windows Vista
http://www.microsoft.com/technet/community/columns/cableguy/cg0406.mspx
There you will find many useful tips, screenshots and the advice how to connect to WLan with Vista.
Please post again if you have found the key

Lost Vista drivers for Satellite L300D

I have a Satellite L300D model PSLC0E and just cleaned installed with Win 7 from vista, all ok so far but lost all my drivers from Vista and not sure what drivers I need for win 7.
I've had a look for the driver downloads, but not sure what to download and whats more important.

If you have done Win7 upgrade you don't need additional drivers.
Just if you want to make clean Win7 installation then you need all necessary drivers.
If you don't have problems with Win7 why you think you need Vista drivers?

Vista Drivers for Satellite A100-PSAA9

Hello everybody/Toshiba driver support,
Can i ask something, what is this ? Toshiba advises Windows Vista but comes with no drivers ?
Maby this is a double post but when do all the drivers come out ?
Well first i thought ok Vista is new lets wait a couple of months we are in the 2nd month of the release of Vista but still no result...
I hope the drivers come fast cause i hate to look at a screen with max light it is bad for your eyes :P...
Greetings

@bombaci
> Well first i thought ok Vista is new lets wait a couple of months we are in the 2nd month of the release of Vista but still no result...
Before you will post some untruths you should check the available driver pages.
The Vista drivers are available and I dont see any problems.
So take my advice and check whole options before you will open new posting! ;)
Greetings

Problems with Vista Drivers on Satellite M100 (PSMA1E)

Similar Messages

Maybe you are looking for