Problems With Your MuVo N200?? I Can Help... Formatting May Not Be Eno
<FONT color=#330000 size=>After two months of using my MuVo Micro N200, I experienced a problem where it would shut-off at random times. Sometimes when i turn it on, the Logo shows up then shuts off. Well, if your MuVo has this problem and you tried formatting but it still came back (like mine)... try this:
<FONT color=#330000 size=>
<FONT color=#330000 size=>Step One:
<FONT color=#330000 size=> Format your Player (save it somewhere so you can put it back)</LI>
<FONT color=#330000> Go to this website www.nomadworld.com/downloads/firmware and look for the MuVo Micro N200 button (or whatever your system is)</LI>
Download (save somewhere like Desktop)</LI>
Connect your computer and system</LI>
Follow instructions</LI>
Reload Files</LI>
ENJOY!!!</LI>
I went looking over here and it took me quite a while to realize what a FIRMWARE was but then when I got what it was, I felt so proud that I wanted to just share the instructions with everyone.
I am just saving the trouble of you going all over the place, but if it doesn't work, maybe you need to talk to customer support
Enjoy,
IHeartMyMuVo
<FONT color=#330000 size=>
HI. I get a hiss too. It seems to happen only when the light is on. something about the light power and the phone circuts, I suppose. Also happens anytime the light goes on, right? I shut off the light to prolong battery so it doesn't bother me any. Do you need the light?
K
Similar Messages
-
Cannot play songs, the following comes up - Itunes has detected a problem with your audio configuration.
Audio/Video playback may not operate properly.
Cheers
Wade LawrenceHello Wade,
This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
"iTunes cannot run because it has detected a problem with your audio configuration"
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
Cheers,
Allen -
Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.
I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,... -
Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
epThis forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards. -
Hi Everyone - recently this message popped up on my PC, when I was trying to import cd's into the iTunes library and then onto my iPod - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." Can anyone tell me what this means and how to fix it ?? I am not fantastically PC savvy, so any information explained fully and all steps to follow to get my music playing again would be great !! Thanks, SC
Hi B, thanks so much for helping me troubleshoot !!
Ok, so when I went in to check the Audio tab of the Sounds and Audio Device Properties, I found the following:-
* Sound Playback Default Device = No Playback Devices.
* Sound Recording Default Device = No Playback Devices.
* MIDI Music Playback Default Device = No MIDI Playback Devices.
All text in this drop-down box were light grey, and therefore unable to be selected or altered.
I also tried playing a cd through Windows Media player, to see if I could get sound a different way. When I put the cd in and clicked on Play, the following message appeared, "Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your PC, it may be in use by another program, or it may not be functoning properly."
Any ideas ? I had sound previously, but then a work colleague re-built the PC to add more space to the hard drive, and since then, no sound. I know this may now not just be an iTunes issue, but I would appreciate any assistance you can offer.
Thanks again,
Shell -
When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(
Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy -
When I go to open Itunes, I get a message saying "Itunes has detected a problem with your audio configuration. Audio/Video playback may not work properly. I've tried closing and re-opening Itunes but it still comes up. I've also tried removing quicktime, repairing Itunes and restarting my computer after that. It still says the same thing. I've also tried reinstalling Itunes as well.
Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy -
When I open Itunes on my PC it says, Itunes has detected a problem with your audio configuration. Audio/video playback may not operate properly. I removed some unused programs from my pc before this happened and I think I may have removed something I shouldn't have.
I had this same problem and my sixteen year old figured it out. Since the Windows PC running iTunes (which supports a housefull of AppleTVs) was running in a closet, he suspected it was due to having no speakers attached.
Sure enough, when I went into control panel to look at my sound settings, I noticed something I had missed previously. There was a red mark on the device. I took his advice and plugged in some earphones to the speaker jack and, wallah, the red mark turned green and the iTunes warning never popped up again. -
I run windows 7 and have used iTunes recently to listen to internet radio and iPod tracks (when loaded). recently, I get the error message about the problem with my audio configuration every time I launch iTunes. sure enough, nothing plays, yet internet audio/video clips play fine, so this is a specific problem with iTunes. to address this, I have already
1. removed and reinstalled iTunes using the add/remove programs windows
2. uninstalled and reinstalled Quicktime
3. updated my Windows audio device drivers
4. restarted the Windows audio and management something under
i don't know what i'm doing wrong or why the problem is sudden. but nothing will play from iTunesI'm having the same problem. I have downloaded Itunes again but still the same problem.
-
I am not having any trouble with my i-pod which I can continue to connect to the computer to update. However when I get into the listen to the music on the computer I am unable to hear anything. This is also true for Spotify, and my own cd's inserted in the computer and i-player. I have connected an old Sony Discman to my amplifier and it works perfectly, so I know that the problem is not with the amplifier or the lead so it must be the computer audio.
My computer is a COMPAQ CQ 1140UK SLIMLINE DESKTOP PC.
I need to stress that I am a 65 year old non tech user. I use my computer a lot but have no idea how it works!! .
I believe that in my efforts to resolve this issue myself by going into the control panel .....I may have caused even mor problems.
At first, today, I could see that the track was playing, CURSOR MOVING ACROSS THE TRACK LINE, but I was getting no sound....now the tracks don't even seem to be playing at all!!
I remember, afew days ago seeing something flash up on Spotify about how it was going to do something with my i-tunes but it stated that it was nothing to worry about! So I didn't, until today!!
I only used Spotify to locate a track before I purchased it through i-tunes.
If anybody could advise me of what I could do to resolve this problem then I'd be most grateful.
This is my first time on this Apple Support Community so I hope that I am right in thinking that any response will arrive in my e-mail.
Thanks again
grahamhollyIt might be worth trying a dxdiag to see if that finds anything amiss, michael.
Go Start > Run. In your Run, type dxdiag and hit enter.
Work through the troubleshooting tabs. Does dxdiag report any problems? -
I have iTunes 10.7 on Windows 7 and I need this so I can update my library before the iPhone 5 arrives! Any ideas???
Much Thanks!
-AlanI had this same problem and my sixteen year old figured it out. Since the Windows PC running iTunes (which supports a housefull of AppleTVs) was running in a closet, he suspected it was due to having no speakers attached.
Sure enough, when I went into control panel to look at my sound settings, I noticed something I had missed previously. There was a red mark on the device. I took his advice and plugged in some earphones to the speaker jack and, wallah, the red mark turned green and the iTunes warning never popped up again. -
Error message -ITunes has detected a problem with your audio config...HELP
error message - itunes has detected a problem with your audio configuration. audio/video playback may not operate properly...
ive gone through the itunes support steps such as reinstalling quicktime and itunes and nothing seems to work... itunes still open...but then nothing plays...please help meI've cobbled together a few ideas courtesy of some posts made by the inimitable b noir concerning this particular problem .
First ...
... let's try swapping out your QuickTime, taking a few additional explicit precautions this time.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
Next ...
If you're still getting the message with a fresh quicktime in place, let's check to see if something is awry with your sound card.
Open your "Sounds and Audio Devices" control panel. Click the "Audio" tab. Is the correct default device showing up in the "Sound Playback" area? -
I meet a big problems with my Z 10 , Who can help me??
i can not log into the BBW(it said the BBW meet a problem and i should shut down it), and i can not use the BBM with the WI-FI (it works with the data serivices), any one can help me, i really need your help???
No need for duplicated threads:
http://supportforums.blackberry.com/t5/BlackBerry-Z10/NEED-HELP-FOR-limitied-WIFI/m-p/2876174#nobann...
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
A Problem with my Muvo N200----Can some one help
I bought the n200 bout 3months ago...and while it is is switched on, and when i go to the settings option...no key works...i mean whateverbutton i press, the cursor goes to the next option in the settings rather than selecting it....so...i cant change any setting or do any thing in the settings options...
The recommendation in the?BEFORE you post, READ THIS FIRST (FAQ) post is to try a firmware update.
-
Pls: I have some problems with GOP java card. who can help me?
hello, all
I am going to install my cap file into Global Open Platform Card( S1-TiEx-S32J, which uses GP2.0.1) now.
but, I have failed.
I use J2SDK1.4.2.10 when I compile the java file.
And use Java Card 2.2.1 Development Kit when I convert to cap file.
The sequences of the command / response are below;
[SEND]00A4040007A0000000030000
[RECV]611F
[SEND]00C000001F
[RECV]6F188408A000000003000000A50D9F6E0A42505042474F317601019F6501FE9000
[SEND]80500000082021222324252627
[RECV]611C
[SEND]00C000001C
[RECV]0000FFFFFFFFFFFFFFFF0000E1C81BD9C2573DF5AA8EEB95251A95A59000
[SEND]8482000010A8BD185CD6A3940C83855021A4DFF412
[RECV]9000
[SEND]80E60200050000000000
[RECV]6700
What was wrong?
If you are experience with this kind of java card, pls help me.
with best regards,
yong leeAndalib3,
There are a couple of options that you have as far as getting this to work. First off go to Control Panel and then to Sounds and Audio Devices (or multimedia depending on the version of windows). In here go to the Audio tab and then under preferred Midi Playback Device you should have a couple of options. There are two settings here that will work:
) Microsoft GS Wavetable Synth - This is a very basic midi sound set that is emulated by the OS
2) Li've! Midi Synth (A or B) - This is the hardware midi synth on the card.
Make sure one of these is selected as the default midi playback device and then test your games again.
Jeremy
Maybe you are looking for
-
How can I "refresh" my iTunes Library?
How can I "refresh" my iTunes Library? I recently moved my library to an external and made the source folder change in preferences. My library now shows all exclamations asking me to locate the files. What is the quick fix to locate or "refresh" all?
-
Named query problem, [TOPLINK-6008] error
I created a simple table in database (one column, two rows). I created java class and Data Control and dragged the Data Control onto JSP page. Data were shown ok. Then I tried to create named query (simple SELECT MyCol FROM FROM MyTable). This time t
-
I am not able to open PDF file of size greater than 700 Mb in my surface tab?
-
Aperture 3, Snow Leopard, iMac ATI Radeon X1600 and graphics issues
I have been searching the web to see if 10.6.4 has finally solved the graphics issues with the white iMac 2.16 intel with the ATI Radeon X1600 graphics processors and seen some mixed reviews. What is the consensus here, has 10.6.4 finally solved the
-
Flash 16 not recognized by browsers
Hello everyone, I recently reinstalled windows 7 64bits on my machine, and quickly installed Chromium 42 (64bits). I then visited a web page which required flash, a Chromium banner told me to install flash, so I followed the given link, leading to th