Problu00E8me calling sendmail under windows

Hello,
 
when i use send mail from OS it works but when i create RFC and i call it from it, it gives me time out error with the bellow trace file content : 
Trace file opened at 20100127 015854 Romance Standar, REL 46D,0,2257, VER 3 MT-SL 
======> CPIC-CALL: 'ThSAPCMRCV' 
Timeout during connection setup (check that partner exists) 
ABAP Programm: RSRFCPIN (Transaction: SM59) 
Called function module: RFC_PING 
User: ABKE01 (Client: 601) 
Destination: ENVOI_MAIL (handle: 2, convid , {DA8FFB0B-40FF-4485-98AC-1C2A1BA13B15}) 
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2961 
CPIC-CALL: 'ThSAPCMRCV' 
Timeout during connection setup (check that partner exists) 
thank you for the help.

>
Look on the thread about 20 topics down its called
'javaexe'Mmm, thanks, I've already seen that. That's not what I'm looking for. I want my java-program to run on a windows-machine WITHOUT a preinstalled JRE. I need this because common-use office pcs usually don't have a JavaVM installed and most users don't have rights on these computers to install one.
One solution would be if I had a JRE-version that could be started right away on any windows-computer (from a cd, for example) without preceding installation. Of couse any other solution (is there any?) is welcome too. :-)

Similar Messages

List of Called Forms Under Window Menu

Hello,
Environment : Forms 6i c/s
As everyone knows, whenever you call a form, all the called form's window name will appear under the WINDOWS menu. However while calling a form in QUERY-ONLY mode the CALLING form's window name disappear from the list,is it Form's default behaviour?

This is due to the modality of the called form - you cannot navigate back to the calling form whilst the called form is still open. If you want to be able to navigate to the caller then use OPEN_FORM instead.

Running DS-5 armcc compiled code (PIC) under Windows EC 2013

Hi All,
i just wanted to know if it is generally (officially) supported to run code that is compiled via the armcc (5.03) from DS-5 under Windows Embedded Compact 2013. Or if this is discouraged (reasons?).
The problem i have:
The bootloader contains some code that must be run during Windows EC Startup. So this code is loaded from the Flash, copied to RAM (reserved and commited via VirtualAlloc and marked as executable) and then the functions are called via FunctionPointers.
The code is compiled and linked as position independent and the stack base register is set accordingly before any function is called via pointer and reset when it returns.
This works in about 9 out of 10 tests without problems. But sometimes i get all sort of exceptions (Data Abort, Prefetch Abort, Unknown Instruction, ...). Most (if not all) of the time they occur when the position independent code runs on one of the two
cores.
The code runs on an i.MX6DQ (dual).
If i only enable one core, i can't reproduce the problem (i assume that multicore-handling and multithreading in WinEC 2013 Update 10 is really well tested and works without problems, so this can't be the real reason).
I've thoroughly checked and debugged the code, i'm really sure there is no illegal access or other problem with the code itself.
Could it be a problem to call code compiled via DS-5 armcc? I've compared assembler code that Visual Studio/Platform Builder generates with code that DS-5 generates (but i'm no assembler expert). I can't see any obvious special code that is added by Visual
Studio/Platform Builder (i.e. that functions need) that is not there in the DS-5 code.
Best Regards
Sebastian

So I think you could be able to image some code for ROM from another compiler and without knowledge of Windows CE. However, if the code will be called from Windows CE, this becomes more difficult requiring very careful isolation from the
MMU state, processor state, kernel/user mode, etc. Code that works great when called from the bootloader might not work at all from Windows CE itself. The main problem with mixing code from different compilers is the object file format and conventions for
entry and public names. Very unlikely that you'd be able to "link" code from any other compiler with PB-compiled code.
You might think about the x86 image which can easily call BIOS from the bootloader but which can't even begin to call BIOS from CE itself. The problem isn't the compiler (which is different), but the operating environment differences and assumptions.
Paul T.

Adobe Photoshop CS3 Extended freezes on startup under Windows 7 Ultimate 64-bit - No splash screen

I installed my licensed copy of Adobe Photoshop CS3 Extended today as part of my install a bunch of software after a reinstall of Windows (due to viruses). I did a completely fresh install of Windows 7 Ultimate 64-bit. I've used Photoshop CS3 Extended for quite a while now so I know what to expect on startup but it was previously installed under Windows XP Professional (32-bit). Figured I would give Windows 7 a chance this time around.
Google searches aren't turning up anything. When I attempt to start the application, I get a window with the title "Adobe Photoshop CS3" (no "Extended" - I seem to recall the title changes later) and the toolbar appears. However, no splash screen appears and no Product Activation wizard appears - the application simply freezes on an empty frame and a toolbar. I've tried running Photoshop as Administrator (right-click, "Run As Administrator"), but nothing changed there. I tried uninstalling and reinstalling. I tried upgrading to CS3 10.0.1. Nothing works. The application simply freezes before it gets anywhere.
I tried calling Adobe Support since this technically falls under installation issues but their phone support systems are down today. Go figure.
Edit: I hooked into Photoshop with the Visual Studio debugger and every single thread is executing some variation of WaitForSingleObject() or WaitForMultipleObjects(). The main thread is "executing" somewhere in AdobeLM_libFNP.dll (at address 09619d81 - if I had debugging symbols for CS3, I could provide a function). There are nine threads "running" at the point the freeze occurs - but all of them are technically suspended due to the functions they are executing - and one thread is in a suspended state.

Log Name: Application
Source: Application Hang
Date: 7/17/2010 6:16:25 PM
Event ID: 1002
Task Category: (101)
Level: Error
Keywords: Classic
User: N/A
Description:
The program Photoshop.exe version 10.0.1.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: d0c
Start Time: 01cb2616be79e36f
Termination Time: 2
Application Path: C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe
Report Id: 06f5fbff-920a-11df-9d69-001fd023417e
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Application Hang" />
 <EventID Qualifiers="0">1002</EventID>
 <Level>2</Level>
 <Task>101</Task>
 <Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2010-07-18T01:16:25.000000000Z" />
 <EventRecordID>1615</EventRecordID>
 <Channel>Application</Channel>
 <Security />
</System>
<EventData>
 <Data>Photoshop.exe</Data>
 <Data>10.0.1.0</Data>
 <Data>d0c</Data>
 <Data>01cb2616be79e36f</Data>
 <Data>2</Data>
 <Data>C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe</Data>
 <Data>06f5fbff-920a-11df-9d69-001fd023417e</Data>
 <Binary>430072006F00730073002D0074006800720065006100640000000000</Binary>
</EventData>
</Event>
And, according to the Event Viewer, the "Binary" data translates to a zero-terminated Unicode string of "Cross-thread".
My Visual Studio analysis was far more informative. All threads are hung inside of WaitForSingleObject() and WaitForMultipleObjects() calls and the DLL in question appears to be FlexNet-related. I did forget to mention that I also even manually started the FlexNet service in case, for some strange reason, Photoshop was waiting for it to start. That also did not work.
(And there is nothing in the Action Center control panel either despite the message saying there might be more information there.)
Edit: The timestamp above might be a little odd-looking. I didn't originally see anything in Event Viewer until I clicked the first button to send an Error Report. Mostly I just skipped that part of killing a process.

Error when calling a popup window in the initial screen of an application

Hi,
    I am calling a popup window in the Initial screen to select the variant list.
I am getting an error reference to Null Object reference.
Here is the Error.
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception              CX_SY_REF_IS_INITIAL
Date and Time          15.06.2007 10:00:16
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_WDR_MESSAGE_AREA===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "SUPPLY_VIEW_DATA" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
"CL_WDR_MESSAGE_AREA===========CP" or "CL_WDR_MESSAGE_AREA===========CM00Q"
"SUPPLY_VIEW_DATA"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SUPPLY_VIEW_DATA" "(METHOD)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
To prevent the exception, note the following:
Looking for Ur valuable suggestions.
Cheers,
Sam

Hi Sam,
The correct code for creating a popup window will be:
data lo_window_manager type ref to if_wd_window_manager.
data lo_api_component type ref to if_wd_component.
data lo_window         type ref to if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window         = lo_window_manager->create_window(
                     window_name            = 'WINDOW_NAME'
*                    title                  =
*                    close_in_any_case      = abap_true
                     message_display_mode   = if_wd_window=>co_msg_display_mode_selected
*                    close_button           = abap_true
                     button_kind            = if_wd_window=>co_buttons_okcancel
                     message_type           = if_wd_window=>co_msg_type_none
                     default_button         = if_wd_window=>co_button_ok
lo_window->open( ).
Hope this helps.
Regards,
Ram

Setup cocoon with 9ias 9.0.2 under windows NT

Setup Cocoon with 9ias OC4J (9.0.2) under Windows NT
This was a painful process for me. I finally made it work. Thought my story might help someone else. If anyone sees anything that could cause problems down the line, please let me know.
NOTE: This took me a week to get right, so the restarts I suggest may not be appropriate, just guesses on my part.
A. FIRST SECTION (Based off of steps 9 - 11 of Metalink note 148497.1) - This deploys the cocoon.war file
1. Copy cocoon.war file to oracle 9ias home in the j2ee/home/applications directory. (NOT cocoon_jvm14. I tried to use the cocoon with jvm1.4. The version of 9ias I use wanted 1.3, so that is what I ended up using.)
NOTE: I followed the 9-11 steps from the above note the first time and manually changed the files below, but when I had to reboot my machine a couple of days later it lost the changes. So I went in thru OEM and did it there and have had no problems. These steps are detailed below.
2. Log into Oracle Enterprise Manager. Click on 9ias instance. Click OC4J_home.
3. Go to Advanced Properties. Edit the default-web-site.xml file. Look for the statement <default-web-app application="default" name="defaultWebApp" root="/j2ee"/>. After that statement, add the following: <web-app application="default" name="cocoon" root="/cocoon"/>
4. Go back to OC4J_home. Click on default link near the top of the page. (It has a Path underneath is that says application.xml) Then click on Advanced Properties. Edit the application.xml file. Look for the statement <web-module id="defaultWebApp" path="../../home/default-web-app"/>. After that statement, add the following: <web-module id="cocoon" path="../../home/applications/cocoon.war"/>.
5. Go back to 9ias instance and do a "Restart All".
B. SECOND SECTION ( Based off of Metalink note 184826.1)
1. Go to the Apache/Apache/conf/mod_oc4j.conf file underneath your 9ias home. Add the following line at the bottom of the file: Oc4jMount /cocoon/* home
Either "Restart All" from OEM again, or follow step 3 from the note. WARNING: I read somewhere that if you try to do the dos dcm/opmn stuff with the OEM at the same time, that you have corruption problems? So close the OEM if you do the dos commands just in case.
C. THIRD SECTION (This is what I did with the Cocoon jars to make 9ias/oc4J find them and use them. I am by no means saying this is the correct way. Just a way. If anyone has a different way, I would appreciate hearing it.)
1. Go to 9ias home and in the j2ee/home directory make a new folder. (I called mine xerces.) Copy the following jar files, found in the j2ee/home/applications/cocoon/web-inf/lib directory (this dir will show up after cocoon.war is deployed with the A. FIRST SECTION restart), into your new folder:
a. batik-all-1.5b2.jar
b. xalan-2.3.1.jar
c. xercesImpl-2.0.0.jar
d. xml-apis.jar
2. Log into the Oracle Enterprise Manager. Click on OC4J_home. Click on Server Properties. Scroll down to the bottom and type the following into Java Options: -Djava.ext.dirs=xerces. (If you named your new folder xerces.)
D. LAST SECTION
1. I rebooted my machine and said a prayer. From the url "http://myhost:7777/cocoon/" I got the cocoon welcome page!

I've heard rumors its about a month away. We were waiting for it, but then
decided to go to Linux, as it probably performs better, and the release for
Linux is already out. 9.0.2 is certified on Linux:
- SuSe SLES7
- Red Hat Advanced Server 2.1
Waiting for Oracle to release a software product seems almost like waiting
for a sunny day in Seattle -- you eventaly get it, but its unpredicatable
as to when it will actually be at best...

Mini SAP 7.01 under Windows Vista

Hi every one,
I wanna share my experience with you for installing version 7.01 under Vista. This might help you.
I have installed the newest version ([Message from Klaus Keller| of Mini SAP under Windows Vista and, believe it or not, it all went correct. It is important that you download version Netweaver 7.01, since previous versions are not supported in Vista.
In the download section (http://www.sdn.sap.com/downloads/netweaver/abap/disclaimer.html) you find in file part 1 the description of process in a HTML & PDF file. You must pay much attention to what is described there; otherwise, it might happen that the installation process is not sucessful.
I´m not gonna describe the whole installation process. This is already in the download files. Just a reference of what I did:
1 ) make a backup of your information and have your Windows Vista disk at hand. It might happen that you have to format the computer´s hard disk if something goes wrong (this happened to me a couple of times in previous versions of Mini SAP and Windows XP). This is so, because it is impossible to erase some files and information in the registry (even with the Registry Clean Tool that is also downloadable in SDN). A new installation try was hopeless in those versions.
2) shut the firewall and antivirus off before you start.
3) don´t try to name your computer using special characters like - _ / & % and so on; additionally, name should be max. 13 characters long.
4) you need a user account for windows, even if you´re the only one to use the computer and you must assign a password to that user. You need it once you start the server through the SAP management console.
5) Install the Microsoft loopback adapter
once installed, system names it LAN-connection2 and you must asign a permanent IP address. Press button characteristics for its element Internet protocol version 4, where you enter:
IP-Address 10.10.0.10
Subnetwork mask 255.255.255.0
Don´t touch element Internet protocol version 6 !!
6) file hosts under c:windowssystem32driversetc --> add an entry for the host like this:
#Inicio de insercion
10.10.0.10 jalonso "<-- this is my computer´s name and host name
You must have administrator rights and change the status write-protected for being able to modify it.
7) Process takes less than 1 hour, mostly without user interference.
8) if desired, install Adobe LifeCycle Designer before starting with SAP GUI. It happened to me once (Windows XP) that the installed SAP GUI was erased during installation of LifeCycle. It all then turned into a big mess and I had better to format the hard disk.
9) install SAP GUI on your computer, which is part of the downloaded files.
If installation was sucessful, it might happen that you experience a problem when starting the application server (start --> SAP Netwaever 7.01 --> NSP --> Start application server). You get a red screen with a couple of error messages ([read my post|;). It is not a very serious problem, ´cause you can start the server with the SAP management console anyway.
Hope this helps you when installing Mini SAP 7.01 in your computer.

I am having a heck of a time with this install. My OS is Windows Vista Ultimate.
I've read and re-read several forums and tried all the recommendations.
I've tried installing many time now and each time the install runs to 19% and I get a message " stopping Xserver".
Then it runs to 20% and I get a message "preparing packages for installation".
Then it runs for about 3 seconds and I receive the following:
Errors occurred during the installation.
Errors occurred during the installation.
An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
An error occurred and product uninstallation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
Below is the text from the log file:
(Nov 4, 2008 10:49:37 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Nov 4, 2008 10:49:37 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Ellen/AppData/Local/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Ellen/AppData/Local/Temp/MaxDBSAPNWPREV.log")
 at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
 at java.lang.reflect.Method.invoke(Unknown Source)
 at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
 at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
 at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
(Nov 4, 2008 10:49:38 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Nov 4, 2008 10:49:38 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, java.lang.StringIndexOutOfBoundsException: String index out of range: -60
STACK_TRACE: 24
java.lang.StringIndexOutOfBoundsException: String index out of range: -60
 at java.lang.String.substring(Unknown Source)
 at com.sap.installshield.maxdb.DBEnumProcessHandler.enumerateForUninstall(DBEnumProcessHandler.java:179)
 at com.sap.installshield.maxdb.maxdb_call_sdbinst.uninstall(maxdb_call_sdbinst.java:362)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
 at java.lang.reflect.Method.invoke(Unknown Source)
 at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
 at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
 at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
I hope that I'm ovelooking something simple and that someone can point me in the right direction to get this up and running.
Any help would be greatly appreciated!!!!
Barbara

Presario CQ 71 - Built in Webcam not detected under Windows 7 Professional - No HP-101 device

I have a Compaq Presario CQ 71 EB400. On this notebook I run both Windows 7 Home Premium 64-bits and Windows 7 Professional 64-bits to compare behaviour of apps and windows features in both environments.
Windows 7 Home on my HD C partition
Windows 7 Professional on my HD F partition.
The CQ 71 has a built in Webcam, that shows up under Windows 7 Home premium Device Manager - Imaging Devices (Cameras and Scanners) as HP-101, linked to the required drivers.
Under Windows 7 Home premium:
- The built-in CQ 71 Webcam is detected and operational - the HP-101 entry is present in Device Manager.
- Applications using a Webcam like Skype, Mycam, Manycom etc connect with the Webcam
- When I plug in an external Webcam, thet webcam is detected as well, drivers loaded etc.
Under Windows 7 Professional:
- The built in Webcam is not detected, in the Device Manager -Imaging Devices, the HP-101 Webcam entry is absent
- Skype, Mycam, Manycam cannot find a Webcam (also not when an external USB Webcam is plugged in)
- A plugged in external Web cam is not detected as an imaging device.
I use a Brother printer/scanner/fax machine, the Brother scanner device is visible as Imaging device in Device manager in both Windows 7 Home premium and Windows 7 Professional.
Other USB devices, portable disks, card readers etc seem to work OK in both Windows 7 environments.
The HP support pages provide information what to do when a internal Webcam is not detected; The recommended actions make no difference. Going back to a previous W7 Prof restore point is no option, as on the CQ 71 notebook the built-in Webcam never functioned under W7 Professional.
The major difference is that all Windows 7 Home Premium relatede system software resides on the C partition, all Windows 7 Professional system software on the F partition.
I'm looking for a way to kickstart the built in CQ 71 Webcam under Windows 7 Professional installed on a non-standard partition.
Your suggestions will be very welcome.
Jan Dijckmeester.

Hi again jdij,
It is good to hear back from you!
To enable your system to detect the Webcam in Windows 7, I recommend re-installing the original drivers and software that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). To update the newly installed software, please follow this resource on Using HP Support Assistant (Windows 7).
If the webcam is still not detected, I recommend returning your system back to a previous restore point. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 7).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 7), as well as Performing an HP system recovery (Windows 7). This should return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

D2kwutil running with Forms6i under Windows XP

Hi
I'm trying to run D2kwutil.pll version 6.0.6.0 with Forms6i 6.0.8.8.0 under Windows XP and it's not working when I try to call WIN_API_FILE package. I tryed to run the demo form (WAPIDEMO) that I downloaded with the PLL but they don't run either - As a matter of fact, this form don't open.
Does anyone know what can I do to solve, I mean, to run this PLL under Windows XP - if it is possible?
Thanks
Joco Novaes
System Analyst - CREMESP
[email protected]

How can anyone help if you don't describe the problem? Saying "it doesn't work" is of no value whatsoever.
Regards,
Robin Zimmermann
Forms Product Management Not to be critical or anything Robin, but publicly berating and humiliating your customers doesn't help anyone either.
This is especially true when its obvious from the name and the return email address that the person is Brazilian and is at least making the attempt to communicate the issue in English. Would you have understood their problem better if they'd used their native tongue? Obviously something didn't translate well - and it came accross as "its broken".
And by the way, the customer did describe some of what was wrong... they attempted to open a specific demo form, which came bundled with the PLL file from YOUR company, and it wouldn't even open. They are running XP and Forms 6i, which as far as I last knew was not a certified product combination (which is likely part of the problem).
A little effort (and a kind word) might go a long way toward finding a solution. And if you're just burnt out or having bad day, try to remember that its not OUR fault.
With all due sincerity,
John Julian
john (dot) julian@verizon (dot) net

21.5" iMac brightness problem under Windows 7

Even at lowest possible brightness under Windows 7,
this is much too bright for working in the evening/night.
I was using VistaShades under Vista, but now under Windows 7
VistaShades only darkens the background!
Does anyone know another program for reducing the brightness
which is Windows 7 compatible?
Thanks!
(BTW: I have the same problem using my 24" iMac under Windows 7
see http://discussions.apple.com/thread.jspa?threadID=2358779&tstart=0)

I has the same problem so i called a friend and all he did was go to navida's web site and download the beta drivers for gforce go 7600. make sure it is for windows 7. the ones on HP's website does not work and you can not use auto detect drivers when finding the driver.

How do I get the fn key on the aluminum keyboard to work like Insert under Windows?

How do I get the fn key on the aluminum keyboard to work like Insert under Windows without having to press fn + Enter?
This article explains the problem but has no real solution:
Boot Camp: About keyboards and key assignment for Microsoft Windows - Apple Support

I'm not sure if you even read the first couple of posts at all. On the old Apple Pro Keyboard (white keys and translucent body), pressing the Help key resulted in exactly the same key code as the Insert key on any standard (IBM) PC keyboard. This meant that regarding this key, that Mac keyboard will work just like a PC keyboard. (I don't care much about the other keys.)
The problem is that on the current Apple Keyboard with Numeric Keypad (white low-profile chicklet keys, ultra-slim aluminum body), the Help key is now called fn and produces a different key code than the old Help key, so that you have to press fn + Enter (on the numerical keypad) to get Insert.
This page explains the problem:
Boot Camp: About keyboards and key assignment for Microsoft Windows - Apple Support
Do you understand what I mean? It's not a software thing, it's a hardware issue in the Apple Keyboard with Numeric Keypad, because fn is a hard-coded, not software-controlled modifier key. I have no idea if there is even a way to get around that, and that is what I am trying to find out.

Adobe Acrobat Prof. 8 and Adobe Reader Version 11 under Windows 8.1 x64

Good Afternoon,
my company plan migration from Windows XP to Windows 8.1 x64. For this reason shall I find out, which Software run under Windows 8.1 x64. From Adobe Products we need to know, if Adobe Acrobat Prof. 8 and Adobe Reader Version 11 run under Windows 8.1.
If the Software named above run not under Windows 8.1 x64, could you write me please, which version we need und how much it is. Thank you very much.
Best Regards

If you have Acrobat, there is no need for Reader. Acrobat 8 is not certified for use on Win8.1, only Acrobat XI. You can get the current cost from the Adobe Store at Adobe.com. The cost is a per computer license. If you have a lot of computer, you might be able to negotiate with Adobe on a volume order or site license (for so many licenses) -- you would have to call Adobe on that.
AA 8 can be made to work in some cases, but I would not recommend it in a business environment. It is not worth risking some hickup with software that is marginally compatible when you have some deadline or such.

Providing users the ability to Merge using a DAT file under Windows 7

Hello,
Our organization uses older software that uses Word Templates with Merge Fields, pulling data out of a SQL database. The software itself is old and out of date, but still works under Windows 7. The problem I am having is that the software will
place its own macros inside of Normal.dot to properly merge fields using the Word Templates.
Each Merge document accesses the application folder and goes into a sub-folder to access a file called WORDDATA.DAT that is the data source for the merge. Each workstation has their own WORDDATA.DAT file stored locally in C:\APPLICATION\temp\
In XP (we never used Vista), the proper way to get these merges to work was to do the following:
1. Provide Power Users (see below) with Modify rights to the main APPLICATION folder and propagate those rights down to all files underneath of it (including WORDDATA.DAT). We also had to remove inheritable permissions from the root drive (C).
2. Add Domain Users to Power Users group (for some reason the merges on XP would not work without this) so that anyone logging onto the machine could merge.
3. These templates required the Low security setting for macros in Word for the merge to work properly.
The problem I am facing now is that I cannot get the merges to work properly under Windows 7 Pro without giving the user Administrator rights on the local machine. This is obviously not a good idea. No matter what I try, nothing seems to work.
I've disabled UAC on these machines. Given Full Control rights to the application folder and all sub-folders and have even gone so far as to make the user the Owner of the application folder. But no matter what I do, the merge will not work unless
the user is added to the local Administrators group. I've also noticed strange behavior with WORDDATA.DAT, where it will not relinquish the Read-Only attribute. After running 'attrib' and stripping it of Read-Only and System attributes, the file
reverts to showing Read-Only in the properties. I don't know if this matters or not, but it appears as if Windows will not let anyone modify that file completely.
Does anyone have a suggestion for a workaround? Keep in mind, 1. Disabled UAC, 2. Running the application under Compatibility Mode for XP.
I realize we are using outdated software and this can cause some issues of course, but the basic principle of merging documents works. It has nothing to do with the application itself IMO but seems to be more of a security issue.

I guess I'm completely out of luck on this issue huh? The basics of the problem are simply that unless the user is added to Administrator local group on the Win7 machine, when the merge runs and has to use WORDDATA.DAT, it cannot and the merge fails.
Add the user as an admin and it works but this leaves our systems vulnerable, particularly with users who are happy to just double-click on any old attachment without checking it first.

Right Mouse Button Under Windows?

without the use of an external mouse? Is it possible? Also, is there a 2 button (or anyother) scrolling under windows? Too bad Apple did not build the MBP with a 2 button mouse. If so, it would be an almost PERFECT machine for me. (btw, a week 6 machine, with no bugs)
bruce

www.onmac.net solved many of these issues. crtl-shift-F10 will give you a right. There is a little utility pointed to by the onmac.net drivers page that will give you a right click just like on OSX using the crtl-click method.
http://www.geocities.com/pronto4u/applemouse.html
There is another keyboard utility that you can download from Miscrosoft for remapping the keyboard. I used it to remap my caps lock key to the delete key. It comes as part of a packages of utilities. The info on how to use this thing starts here. Just click on the keyboard link. The utility is called remapkey.exe and there is some discussion on how to use it either in the onmac wiki pages or in their boards. Once you install it and run it its self explanatory
http://wiki.onmac.net/index.php/Users/Drivers

Camera under Windows 10

Hi,
I'm interested in knowing how camera works under Windows 10.
My understanding store app will lost camera when user switch to other app under Windows 8. I did a quick test under Windows 10 desktop mode, it seems to work the same way. My question is, for app like video communication, that means users
can't have video call and working on something else at the same time with store app. Or am I missing something?

For the video call scenario take a look at the Real-time communication sample. This allows a video call alongside another app on Windows 8.1 as
well.

Problu00E8me calling sendmail under windows

Similar Messages

Maybe you are looking for