Process chain for full load.

Hi,
I have developed a Process chain for delta loads. Now my question is, can we use process chain to load full load data source for master data, if yeas then what are the steps.
If we can use process chain for full load to master data then can we use delta and full load infopackages in the process chain.
Please update.

Hi Sata,
You can Include both Full and Delta in the Process Chain. But make sure that you execute the Init InfoPackage manually before executing the delta InfoPackage in the Process Chain.
For Full Load Process chain, add the infopackage
>DTP for Full Load---->delete PSA data variant(after 2days) -
>attribute change run
Normally load the hierarchy first then the attribute and text.
Assign points if it helped you.
Regards,
Senoy

Similar Messages

Delta and Full process chain for same master data target.

Hi Friends,
Can I do full update and delta update through process chain for same master data target and from same source ?
Regards
shekar reddy

Hi Sriram,
why you want to load full and delta for same master data object?
you can achieve this but make sure that you select repair full option for full load IP.
you have this option in scheduler in menu bar
Regards,
Venkatesh

Process chains for loading data to target is not functioning

Hi SAPians,
Recently, we have upgraded the firmware on IBM P590 with the help of IBM on Saturday i.e. 06/12/2008 (The firmware of P5-590 was SF235_209. It was upgraded to SF240_XXX) and since then the process chains for loading data to targets are not functioning properly. We have stopped all the SAP services, database services & OS services from our end and services have been rebooted after firmware upgrade.
However, the problem with the process chains that load transaction data and hierarchies is solved but the chains that load master data are still not working as scheduled.
We tried to load the master data manually, by running DTP to load data to an object analysis code (attributes) the request remained YELLOW. After refreshing it several times, the request turned into RED. The error message was - PROCESSING TERMINATED (screenshot 1 attached).
To mitigate this we tried deleting the bad request and it prompted with the below message:
"Cannot lock request DTPR_4C37TCZGDUDX1PXL38LVD9CLJ of table ZANLYSIS for deletion (Message no. RSMPC178)" (screenshot 2 attached)
Please advise us how the bad request should be deleted?
Regards,
Soujanya

Hi Sowjanya,
Follow the below procedure to make yellow request to RED:
Use SE37, to execute the function module RSBM_GUI_CHANGE_USTATE
From the next screen, for I_REQUID enter that request ID and execute.
From the next screen, select 'Status Erroneous' radiobutton and continue.
This Function Module, change the status of request from Green / Yellow to RED.
Once it is RED, you can manually delete that request...
Releasing LocK
Gott Transaction Code SM12 and release the lock.
Hope It helps you.
Regardss,
Nagaraju.V

Help required for Creation of process chain for Open hub destination(table)

Hi Experts,
I am working on creating process chain for the open hub destination which is targeting data transfer into Table. Which is then push to SAP PI.
2.) Steps to create a process chain for OHD????? Not knowing and even after that
3.) What are the steps for Pushing it to PI (I mean we have generated client proxy also) But need to know ABAP related to trigger process chain
please need your expertise and knowledge. Well atleast with the point 2 I need BI experts help...
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]

Hi Gaurav,
Creating Process chain for OHD.
1. Go to RSPC-> Create a astart variant.
2. Click on process typesin the menu. Fourth from the left. Under this go to LOAD PROCESSES AND POST PROCESSING option.
3. The fifth option is "DATA EXPORT INTO EXTERNAL SYSTEMS". Click on that.
4. Click on F4 and choose your infospoke name.
5. Press the RIGHT button.(if it asks for variant, create a new variant in the same small window besideswritting bar).
6. Join the START process and the 2nd process via dragging.
7. Now add your required other processes.
The general process chain processes are :
1. Start.
2. Delete Indexes (if data loaded to cube).
3. Load process.
4. Delete duplicate request (if it is a full load in cube).
5. Create Indexes.
Hope it helps.
Preet

Process chains for deltas

hello I have one scenario...Can anyone explain how we can implement it?
I want to load data from R3 into Master Data Attribute in BW/BI..and it should include future delta loading also.....
and I want to use Process Chains for this....how can we do it.?(I have knowledge of loading data from R3 To MD Attribute using Process Chain but without deltas)
Thank you
Regards
NR

Hi......
Sorry for late reply.......
If we take the second implementation of PC in your abbove post.....as we included fullload in PC....before delta init.....can it be possible that fullload happens all the time as its in process chain?
yes..........since it is a part of the process chain every time when you will execute the chain.........full upload will also done..............you can do one thing you can copy the chain.......and remove that process......I mean open the chain in Planning view.....in the top where we write tcode......there write Copy...
then the chain will be copied.........remove the start process and the full upload and init upload.........then create a new start process.........look you have to create a new start process.......because you cannot use the same start variant twice..........
whats the use of attrib change run in PCs in general?
Attribute change run is used to activate the master data.......ie to convert the master data from M version to A version..........because upon activation of master data SID will generate...........which is needed to link the master data to transaction data ie dimension table.........in extended star shcema............Also Once active, the data is available in your reports........
Attribute change run also adjust aggregates........
Another thing......This process is just required for Attributes and Hierarchies, not for Text data.
Hope this helps..
Regards,
Debjani........
Edited by: Debjani Mukherjee on Nov 4, 2008 2:11 PM

Creating Process Chains for Infocube

Hi All,
I am trying to create a process chain for Vendor Evaluation(0PUR_C05).I created a start process and the "execute infopack" wich is delta load,so it prompted for "insert delete index" wich i created.Now,what to do next???
the data flow is like this..
infoapck(delta)->psa->infosource->infocube...
is giving the selete index and rebuilding it mandatory??
Please throw a light on this and help me out...
Points will be rewarded..
Regards,
Manjari.

Hi Manjari,
How to do INIT?
Go to Process Chain for Transaction Data.. and go to infopack you want to do INIT.
Right click on that variant and click "Maintain Variant".
Now if you have not yet loaded the cube using this Infopackage, you will find option Full update and Initialize data transfer in Update tab. If you have not loaded cube with any update, go to Initialize Data transfer and select the datatarget you want in Data Targets tab and check "Start immediately" in Scheduler tab and Execute.
Now go to monitor screen and refresh it in times.
Keep on monitoring in that screen until the requests become "Green".
Once the requests are Green, come back to the Cube in RSA1 and check the data in Manage screen whether the data is populated fine or not.
If the data is populated well, now go to Infopackage and in Update tab, change the Update technique to Delta. From now, you can have Delta upload using process chain.
You will come to know whether the process chain is working properly or not by executing the process chain once. In your case, run the process chain only after you are done with INIT.
If you have already loaded cube with Full load, follow the below process for INIT load...
Go to Process Chain for Transaction Data.. and go to infopack and right click it. Click on Maintain Variant.
InOrder to make it in INITIALISE DATA TRANSFERgoto... Menu>Scheduler>INITIALISATION OPTIONS FOR SOURCE SYSTEM..and click on it.
You will get a popup with some requests in it. Select the requests and make them RED and delete all the requests and enter.
And if u check in Update tab ,,for the update mode..it will be seen in INITIALISE DATA TRANSFER mode.
Then move to DATA TARGETS tab and check the data target to which you want to load data.
NOTE: If there is any data in the Cube, you want to do INIT, delete the data first (delete requests in Data target) and start INIT.
Now move to "schedule" tab in Infopackage and check if the radio button is on START DATA LOAD IMMEDIATELY and click on the START button.
Assign points if this helps u...
Regards,
KK.

Load fails while running a Process Chain even before loading to the PSA.

Hi Experts,
We are working on BI 7.0 and ECC 6.0 on an IS-U Project.
We are loading Transaction Data using Process Chains. Data load is failing even before loading to the PSA and the error message is as below:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Inbound Processing
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Had anyone come across this type of error, if so, what could be the reason of failure and probable solution.
Your time is very much appreciated.
Thanks in Advance.
Best Regards,
Chandu.

Hi,
It might be a network connection between the source system and BW? Can you get your Basis colleague to look into the connection?
Hope this helps.
Cheers,
Gimmo

Email Alert for Process Chain for ABAP Process Type

Hi BW Experts,
                         I created a process chain based on ABAP Process Type ( for Broadcasting rsrd_broadcast_starter). I want to add alert message for each ABAP process if it is failed. But I cant see any option showing Successfull or Error or Always when I select create message option on the process type. How ever I can see for other process chain which is loading data (Process Type is Info Package ) from SAP into BW.
                         Please some one tell me why it is not showing alert message for ABAP Process Type.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Jul 13, 2009 10:16 PM

I dont have the exact answer for your question, But as a work around i can suggest you that.
If these ABAP programs are included in a chain and this local chain is a part of meta chain then you can create a message on the local chain.By right clicking on the local chain >Create Message>Success
                                                                                --->Failure
>Always
Hope this resolves the problem tempervorly.I will get back to you once i have
Or the permanent solution is
Its big and also easy method to perform, by this you will be able to get all the options for a ABAP Program also.If you have any questions please let me know.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/creating%20an%20abap%20process%20type%20for%20process%20chains%20in%20bi.pdf

Problem in creating process chains for CO

Hi Friends,
                 I have a CO cube "0OPA_C11" getting data from Three datasources,
those are 0CO_OM_OPA_6(supports delta), 0CO_OM_OPA_1(full only), 0CO_OM_OPA_2(full only), i have already created process chain to this cube using these three datasources, the chain is like this,
1. delete indexes
2.0CO_OM_OPA_6(supports delta
3.0CO_OM_OPA_1(full only),
4.0CO_OM_OPA_1(request overlapping)
5.0CO_OM_OPA_2(full only),
6.0CO_OM_OPA_2(request overlapping)
7.create indexes
        Is it right? here the chain is running, after completion of that, in manage of cube, it is showing only the request for 0CO_OM_OPA_2(full only), the request which were there earlier like Init request and new delta request for .0CO_OM_OPA_6, full request for 0CO_OM_OPA_1 are getting deleted, it is showing the request only for 0CO_OM_OPA_2,
the way how i created the process chain is right or wrong? can anybody give me the solution?
Thanx in Advance
BalajiReddy

Hi Nick,
          Thanx for your reply, everthing is ok what you've asked me to check, i think there is certain scenario to create the process chains for the data targets, which are getting data from multiple datasources, which support delta's as well as full.
          I want that scenario, can you tell me? or can anybody tell me?
The right points are assigned to the right answers.
Thanx in advance
balajireddy

Error in Process Chain for Delta pack

Hi All,
Here I am facing error in process chain for delta pack.
Error:
Last delta upload not yet completed. Cancel I
Please send me the solution asap.
Thanks

Hi,
This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
Refer
Last delta update is not yet completed
Last delta update not yet completed-PC Chain Error
Last Delta Not Yet Completed
This is the same issue as yours.
Thanks,
JituK

How to create process chain for 0EMPLOYEE

I want to create process chain for 0EMPLOYEE attribution and text, how to create it and make a schedule for daily loading? Could anyone write steps in my case? Thanks!

Hi,
Follow the following steps:
1. Go to RSPC->create->give name and disc of your chain.
Start Variant Creation
2. Now you will be prompted to give a start variant,create a new variant(click on page icon )
3.Change Selections->date/ time.
4.give date and time for start of the chain.
5.click the check box for periodic job->period values->daily->save->save
Addition of process types
6.Select the process type "Execute Infopackage"
7.select the name of the infopackage which loads attr data to 0EMPLOYEE.
8.Attribute Change run will come automatically( if not then drag it as well and create variant )
9.select the name of the infopackage which loads text data to 0EMPLOYEE.
10.Attribute change run wil again follow.
(connect the process types which are not connected,by right clicking the process types )
                             start
                       IP A     IP T
                      attr          attr
A = attribute
T = Text
Please Reward points if useful
Manish

How to create process chain for this data flow

Hi experts,
My data flow is:
======================================
2lis_11_vahdr->Transfer rules->2lis_11_vahdr->Update rules->DSO1->Transformation->DTP->Cube1.
2lis_11_vaitm->Transfer rules->2lis_11_vaitm->Update rules->DSO1->Transformation->DTP->Cube1.
======================================
2lis_12_vchdr->Transfer rules->2lis_12_vchdr->Update rules->DSO2->Transformation->DTP->Cube1.
2lis_12_vcitm->Transfer rules->2lis_12_vcitm->Update rules->DSO2->Transformation->DTP->Cube1.
======================================
2lis_13_vdhdr->Transfer rules->2lis_13_vdhdr->Update rules->DSO3->Transformation->DTP->Cube1.
2lis_13_vditm->Transfer rules->2lis_13_vditm->Update rules->DSO3->Transformation->DTP->Cube1.
======================================
Here for each datasource info package brings data upto dso and then from dso dtp fetches the data.
For deltas i want to keep this data flow in process chain.
Anyone please guide me how to keep this in a process chain.
Full points will be assigned.
Regards,
Bhadri m.
Edited by: Bhadri M on Sep 2, 2008 7:20 PM
Edited by: Bhadri M on Sep 2, 2008 7:21 PM

Hello,
Sure it is possible to maintain that dataflow.
Start here:
This is a very good document about process chains:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
Let me know if you have any doubts.
Regards,
Jorge Diogo

How to Create Process Chain for Remote Cube.

Hi,
I created Remote info cube, data from ECC, loaded Successfully, I want to create Process Chain for Reomte Cube, Please Help me.
Thanks,
Nandish Gowda

Hi Nandish,
After initialization, th next delta will come as per your delta nature, if it is 0calday: Then your next delta will come tomorrow only.
If you are able to 7 records in RSA3, why not in PSA( Why it's only 5 records). Analyze this closely.
Sometimes, RSA3 exactly doesn't match with PSA because, RSA3 works on update mode F.
Regards,
Suman

HOW TO CREATE PROCESS CHAIN FOR PSA ARCHIVING

SDN EXPERTS,
i like to create process chain for archiving. but i dont see any event for archiving when i go to create a process chain for PSA archiving. please let me know.
thanks

Hi,
In the below document on the 14th page it says it is not possible to archive the master data & PSA.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f47fec9f-0501-0010-ce84-8a7231715ae6
As per my understanding..
But one thing you can do is use another ODS and load the same data that you're loading to something else and try to archive that data(Only if you have transformations in the current CUBE/ODS).
Correct me if i was wrong and eloborate your requirement.
Regards, Siva

How to create Process chain for Aggregate for Master data

Hello friends,
I created Aggregates on Navigational Attributes.
Now they are working fine, but i need to know that how shall i create the Roll up for Aggregates on Navigational Attributes.
The point is the master data changes frequently a lot of time for e.g. for 0customer etc.....
So if any one can send me the step by step documents so as to know how to roll up the Aggregates for Navigation attributes or for aggregates created on Master data....
How to create process chains for the same ?????????
Because if master data changes, then rolling up the aggregates straight forward will not help.
So we need to write a process chain so that it deactivates the aggregate and reactivate again and fill up again..........
If i mis interpreted something please rectify it.......
Please advise

Hello,
the changerun that you have to schedule in order to activate the master data will adjust the aggregates automatically. There is no need to deactivate them after master data loads.
Best regards,
Ralf

Process chain for full load.

Similar Messages

Maybe you are looking for