Process Chain taking long time in loading data in infocube

Dear Expert,
We are loading data thru PC in AR cube it takes data frm
PSA-> DSO->Activation->Index Deletion->DTP(load infocube)->IndexCreation->Create Aggregates.
In Index creation everyday its taking long time around 9 to 10 hrs to create it
when we go in RSRV and repair the infocube thr loading of data happens fast. We are doing it(RSRV) everyday. In DB02 we have seen dat 96% tablespace is used.
Please tell permanent solution.
Please suggest its BI Issue or Basis.
Regards,
Ankit

Hi ,
We are loading data thru PC in AR cube it takes data frm
PSA-> DSO->Activation->Index Deletion->DTP(load infocube)->IndexCreation->Create Aggregates.
In the above steps insted of Create Aggregates it should be Roll up Process of aggregates.
You can ask the basis team to check the Table space in the transaction db02old/db02.
Check if there is long running job in SM66/SM50 kill that job.
check there should be enough Batch process to perform the steps.
Hope this helps.
"Assigning points is the ways to say thanks on SDN".
Br
Alok

Similar Messages

Process chain taking long time to complete

Hi,
I am having following issues in the process chain daily loads
1) The PSA deletion is taking very long time on fridays only (nearly 3 hrs). Other days it gets deleted in 1 hr max.
2) Just to load 381 records via dtp from DSO to cube takes nearly 2 hrs(Delta load). No major routines are written in the transformation.
How to analyse a process in process chain which does not fail, but takes very long time to complete. Is there any tool or transaction in BW which can help us to analyse why the process chain takes so long time to complete in different days. One day it completes in 8 hrs, another day it takes 12 hrs.
None of the transactions, SM37, SM50, SLG1, LOGS etc are giving me any help to analyse this issue.
If it fails we have error logs to check and analyse, but without failing how we can analyse and fix the delay and reduce the time of loading data. Please guide me.
Thanks in advance.
Vishwanath

Hi.......
1) This might be due to the poor performance of the system ..there wont be enoughwork processes avilabe in teh system .- What needs to be done if it does not have enough work processes available. Though I can find that lots of dialog processes were free during these jobs as well some Background processes were also free.?
Look to increase Work Process.......................u can do two things..............U can cancel some Job...........which r not progressing...........or which r not very important for the time being..........
Or if possible........u can increase number of servers..........
Look When a Job will start...............first it will run in background.............u can start in in Dialog also..........but for Dialogue after some time ..load will go to time out.................now many Child jobs will be created for a single background jobs..............they may run in Dialogue..........u can monitor them through SM66............
2) Check ST04 for lock waits and dead locks ..if the same lock persist for long then check with basis team.
What needs to be conveyed to the basis team when these locks happen?
generally these will be temporary Locks.............after some time locks will be realeased..............if they persist for a long time...........then u can contact Basis people..........Or if u can understand that which job is creating the lock.............like if u double click on the job >> click on Job details...............from there u will find the PID................copy that.............and check in ST04..........whether they matches or not..............now suppose it match.............and u know that job is not very important............then u can cancel the job.............
Check also the table space availba in St04 . the usuage should nt be more than 90%
What needs to be conveyed to the basis team if the usage is more than 90%.?
U can ask them to increase the Table space........
Check the sm37 >> delay column it should nt be high
What needs to be done if delay column is high. Actually it is high for these jobs (PSA deletion and load from DSO to Cube visa DTP (Delta load)?
If Delay is more.............it means ...........that there is no free work process...jobs r going to Release state............solution I had already given u.......
Check the PID refeclting in lock waits in sm66 wether they are progressing or nt ..
If they are not progressing what action needs to be taken?
Actually...........suppose one Dialogue job is running............it may change..........ie that Dialogue job will go to Stop status.........some other job will start............anyways if it does'nt progress............u can cacel the JOb.........
Check OS07 for DB if the idle time is less then 20% then its a problem ..
If the Idle time is less than 20% what action needs to be taken?
U can contact the Basis people.......
Check sm21 and RFC connection with other source systems in sm59 ..
What needs to be checked in SM21 and SM59 specifically? What parameter i need to check?
In SM21.............if red status is there............check the Log beside that..............may be it will be some Terminal disconnected.......
In SM59...........clck on test connection..........
if the problem is occuring due to only one source system then check the performance of that system ..
How to check the performance of these systems? Any tools available in R/3 system to check its performance?
No.....in this way u can check performance for all the source system...........go to SM59............double click on the desired source system>> click on test connection......
If All these are persisting then its a performance problem and check with basis team ..
Is there any special settings which needs to be maintained to achieve better performance of Process chain loads?
U can Improve the performance of process chain by Parallel Processing..........ie split the loads by giving selections...........and execute thenm in parallel..........
Regards,
Debjani........

Infopackage in process chain taking long time to run

HI Experts,
One of the element (Infopackage) in process chain(Daily process chain) is taking much longer time(6 hr and still runing) as generally it takes 15-20 mins to complete and the status is in yellow and still running in process monitor without giving any clear picture of error. Manually we are making the staus red and we are updating from PSA and this time it is getting completed in time as specified.
Flow from PSA to datatarget(DSO) in series
For last one week we are facing same issue and i would like to mention that we don't have access to SM37,SM12 to look the logs
and any locks.
without this i need to investigate what is the root cause for the same.
with regards,
murali

Hi,
please find the job log.
Date
Time
Message
MsgID/No./Ty
13.12.2010
21:45:30
Job started
00
516
S
13.12.2010
21:45:30
Step 001 started (program SBIE0001, variant &0000000109368, user ID RFCUSER)
00
550
S
13.12.2010
21:45:30
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
R3
413
S
13.12.2010
21:45:30
DATASOURCE = 2LIS_17_I3HDR
R3
299
S
13.12.2010
21:45:30
RLOGSYS    = PBACLNT200
R3
299
S
13.12.2010
21:45:30
REQUNR     = REQU_D9GSSV08BTS93Z6Y7XWP1ZEUJ
R3
299
S
13.12.2010
21:45:30
UPDMODE    = D
R3
299
S
13.12.2010
21:45:30
LANGUAGES = *
R3
299
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:30
         Current Values for Selected Profile Parameters               *
R8
049
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:30
abap/heap_area_nondia......... 0                                       *
R8
050
S
13.12.2010
21:45:30
abap/heap_area_total.......... 25500319744                             *
R8
050
S
13.12.2010
21:45:30
abap/heaplimit................ 40000000                                *
R8
050
S
13.12.2010
21:45:30
zcsa/installed_languages...... ED                                      *
R8
050
S
13.12.2010
21:45:30
zcsa/system_language.......... E                                       *
R8
050
S
13.12.2010
21:45:30
ztta/max_memreq_MB............ 2047                                    *
R8
050
S
13.12.2010
21:45:30
ztta/roll_area................ 3000320                                 *
R8
050
S
13.12.2010
21:45:30
ztta/roll_extension........... 2000000000                              *
R8
050
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:31
70 LUWs confirmed and 70 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
RSQU
036
S
13.12.2010
21:45:33
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 9,895 records
R3
407
S
13.12.2010
21:45:33
Result of customer enhancement: 9,895 records
R3
408
S
13.12.2010
21:45:33
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 9,895 records
R3
407
S
13.12.2010
21:45:33
Result of customer enhancement: 9,895 records
R3
408
S
13.12.2010
21:45:33
PSA=0 USING & STARTING SAPI SCHEDULER
R3
299
S
13.12.2010
21:45:33
Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
R3
409
S
13.12.2010
21:45:34
IDOC: Info IDoc 2, IDoc No. 5136702, Duration 00:00:00
R3
088
S
13.12.2010
21:45:34
IDoc: Start = 13.12.2010 21:45:30, End = 13.12.2010 21:45:30
R3
089
S
13.12.2010
21:45:35
Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks)
R3
413
S
13.12.2010
21:45:35
Altogether, 0 records were filtered out through selection conditions
RSQU
037
S
13.12.2010
21:45:35
IDOC: Info IDoc 3, IDoc No. 5136703, Duration 00:00:00
R3
088
S
13.12.2010
21:45:35
IDoc: Start = 13.12.2010 21:45:35, End = 13.12.2010 21:45:35
R3
089
S
13.12.2010
21:55:37
tRFC: Data Package = 1, TID = 0AF0842B00C84D0694000F00, Duration = 00:10:03, ARFCSTATE = SYSFAIL
R3
038
S
13.12.2010
21:55:37
tRFC: Start = 13.12.2010 21:45:34, End = 13.12.2010 21:55:37
R3
039
S
13.12.2010
21:55:37
Synchronized transmission of info IDoc 4 (0 parallel tasks)
R3
414
S
13.12.2010
21:55:37
IDOC: Info IDoc 4, IDoc No. 5136717, Duration 00:00:00
R3
088
S
13.12.2010
21:55:37
IDoc: Start = 13.12.2010 21:55:37, End = 13.12.2010 21:55:37
R3
089
S
13.12.2010
21:55:37
Job finished
00
517
S

Info Package in Process Chain taking long time

Dear All,
Info Package in Process Chain having 0 records is taking 1 hr 5 mins to complete. Time out time is set to 10 mins.
Does any one of you know the reason why it is happening like this?
Regards.

When the info package status turns to green : final message is :
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Diagnosis
     The data request was a full update.
     o   In this case, the corresponding tab
             contain any data.
     o   System Response
             Info IDoc received with status
             Procedure
Check the data basis in the source system.
Analysis
========
No data available in the source system for this selection
No further action necessary
When the status was red, I checked BD87 and SM58 and there were no entries.
The corresponding job in sm37 took 869 seconds to complete. Below was the job Log.
Job started
DATASOURCE = 0CO_PC_02
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 0 records
Result of customer enhancement: 0 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Result of customer enhancement: 0 records
IDOC: Info IDoc 2, IDoc No. 1345319, Duration 00:00:00
IDoc: Start = 24.10.2011 18:29:54, End = 24.10.2011 18:29:54
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 1345330, Duration 00:00:00
IDoc: Start = 24.10.2011 18:44:18, End = 24.10.2011 18:44:18
Job finished.
PLease help.
Regards.

Process chain taking long time

Hi,
I developed a Process chain. In developemnt for Completion of the Update rules(Start routine) its taking 60m( for around 50,000 records).
After transporting the Process chain to Production for Start routine completion (For 1,70,000 records) its taking 7hrs and sometimes its failing as the "Process is Over due" and sometimes due to "Short dump".
How to handle this.........
Thanks

Hi js,
Check the ST22... Any dumps
Check out for the short dump in source system and try loading the delta again
then
I have got the problem when u have posted...but little later.Even I was about to post the issue.. Actually my issue was...
My PC is like this
1) Start Process
2) Delete index
3) Load IP
4) delete overlapping request
5) create Index
6) ABAP program
Process chain hangs at Overlapping requests process type but the status was yellow. And the previous step (3) was success. From there its not moving to next further steps.. But the Job in SM37 was canceled.
I saw Ur post and saw the note 833168 and which matches exactly our issue.
Like we run the PCs thru the TIDAL where due to some problems PC got triggered twice... I can see the two logs in the PC. (Log view) and two requests at RSMO.
Everything was recovered again thru manual steps. This is the first time we encountered... the note helped us ... We now are very cautious about the Tidal runs...
Now PC is running perfectly
we have instructed the Supported team to make the necessary changes or fix this issues in TIDAL...
i hope this is helpful to u
bye now
suresh

Long time to load data from PSA to DSO -Sequential read RSBKDATA_V

Hi ,
It is taking long time to load data from PSA to DSO. It is doing Sequential read on RSBKDATA_V and table contents no data .
we are at - SAPKW70105. It started since yesterday . There is no changes in system parameters.
Please advice.
Thanks
Nilesh

Hi Nilesh,
I guess the following SAP Note will help you in this situation.
[1476842 - Performance: read RSBKDATA only when needed|https://websmp107.sap-ag.de/sap/support/notes/1476842]
Just note that the reference to Support Packages is wrong. It is also included in SAP_BW 701 06.

The 0co_om_opa_6 ip in the process chains takes long time to run

Hi experts,
The 0co_om_opa_6 ip in the process chains takes long time to run around 5 hours in production
I have checked the note 382329,
-> where the indexes 1 and 4 are active
-> index 4 was not "Index does not exist in database system ORACLE"- i have assgined to " Indexes on all database systems and ran the delta load in development system, but guess there are not much data in dev it took 2-1/2 hrs to run as it was taking earlier. so didnt find much differnce in performance.
As per the note Note 549552 - CO line item extractors: performance, i have checked in the table BWOM_SETTINGS these are the settings that are there in the ECC system.
-> OLTPSOURCE - is blank
   PARAM_NAME - OBJSELSIZE
   PARAM_VALUE- is blank
-> OLTPSOURCE - is blank
   PARAM_NAME - NOTSSELECT
   PARAM_VALUE- is blank
-> OLTPSOURCE- 0CO_OM_OPA_6
   PARAM_NAME - NOBLOCKING
   PARAM_VALUE- is blank.
Could you please check if any other settings needs to be done .
Also for the IP there is selction criteris for FISCALYEAR/PERIOD from 2004-2099, also an inti is done for the same period as a result it becoming difficult for me to load for a single year.
Please suggest.

The problem was the index 4 was not active in the database level..it was recommended by the SAP team to activate it in se14..however while doing so we face few issues se14 is a very sensitive transaction should be handled carefully ... it should be activate not created.
The OBJSELSIZE in the table BWOM_SETTINGS has to be Marked 'X' to improve the quality as well as the indexe 4 should be activate at the abap level i.e in the table COEP -> INDEXES-> INDEX 4 -> Select the u201Cindex on all database systemu201D in place of u201CNo database indexu201D, once it is activated in the table abap level you can activate the same indexes in the database level.
Be very carefull while you execute it in se14 best is to use db02 to do the same , basis tend to make less mistake there.
Thanks Hope this helps ..

SSRS Reports taking long time to load

Hello,
Problem : SSRS Reports taking long time to load
My System environment : Visual Studio 2008 SP1 and SQL Server 2008 R2
Production Environment : Visual Studio 2008 SP1 and SQL Server 2008 R2
I have created a Parameterized report (6 parameters), it will fetch data from 1 table. table has 1 year and 6 months data,      I am selecting parameters for only 1 month (about 2500 records). It is taking almost 2 minutes and 30 seconds
to load the report.
This report running efficiently in my system (report load takes only 5 to 6 seconds) but in
production it is taking 2 minutes 30 seconds.
I have checked the Execution log from production so I found the timing for
Data retrieval (approx~)    Processing (approx~)           Rendering (approx~)
10 second                                  15 sec
        2 mins and 5 sec.
But Confusing point is that , if I run the same report at different time overall output time is same (approx) 2 min 30 sec but
Data retrieval (approx~)       Processing (approx~)                Rendering (approx~)
more than 1 min                            15 sec
more than 1 min
so 1 question why timings are different ?
My doubts are
1) If query(procedure to retrieve the data) is the problem then it should take more time always,
2) If Report structure is problem then rendering will also take same time (long time)
for this (2nd point) I checked on blog that Rendering depends on environment structure e.g. Network bandwidth, RAM, CPU Usage , Number of users accessing same report at a time.
So I did testing of report when no other user working on any report But failed (same result output is 2 min 30 sec)
From network team I got the result is that there is no issue or overload in CPU usage or RAM also No issue in Network bandwidth.
Production Database Server and Report server are different (but in same network).
I checked that database server the SQL Server is using almost Full RAM (23 GB out of 24 GB)
I tried to allocate the memory to less amount up to 2GB (Trial solution I got from Blogs) but this on also failed.
one hint I got from colleague that , change the allocated memory setting from static memory to dynamic to SQL Server
(I guess above point is the same) I could not find that option Static and Dynamic memory setting.
I did below steps
Connected to SQL Server Instance
Right click on Instance go to properties, Go to Memory Tab
I found three options 1) Server Memory   2) Other memory   3) Section for "Configured values and Running values"
Then I tried to reduce Maximum Server memory up to 2 GB (As mentioned above)
All trials failed, this issue I could not find the roots for this issue.
Can anyone please help (it's bit urgent).

Hi UdayKGR,
According to your description, your report takes too long to load on your production environment. Right?
In this scenario, since the report runs quickly in developing environment, we initially think it supposed to be the issue on data retrieval. However, based on the information in execution log, it takes longest time on rendering part. So we suggest you optimize
the report itself to reduce the time for rendering. Please refer to the link below:
My report takes too long to render
Here is another article about overall performance optimization for Reporting Services:
Reporting Services Performance and Optimization
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Delete Index in Process Chain Takes long time after SAP BI 7.0 SP 27

After upgrading to SAP BI 7.0 SP 27 Delete index Process & Create index process in Process chain takes long time.
For example : Delete index for 0SD_C03 takes around 55 minutes.
Before SP upgrade it takes around 2 minutes to delete index from 0SD_C03.
Regards
Madhu P Menon

Hi,
Normally index creation or deletion can take long time in case your database statistics are not updated properly, so can check stat after your data loading is completed and index generation is done, Do creation of database statistics.
Then try to recheck ...
Regards,
Satya

Crystal reports for Eclipse (CR4E) - taking long time to load

HI
We have used your Crystal reports for Eclipse (CR4E) but it is taking long time to load if the record count is more than 3 million
Our architecture is we are using Oracle DB and web sphere application server both are running on SUN server,
If we buy original version it will work fast?
Or do you have alternative solution for this, this one to implement one of our major client

You have 3 million records, this is going to take time to process. Also, you don't define what is meant by a long time. Are we talking a couple of minutes, or something more like 20 minutes?
The real question is, do you really need the report to bring back 3 million records? Could you do any filtering of the data to reduce the number of records being brought back? Also, 3 million records could vary. is each record a single field, or is it multiple. The more fields, the larger the result set.
Another thing you want to look at, is just how long is the query taking to run against the database.

ESS page taking long time to load

Dear Experts,
While logging to the sap portal, the ess page is taking long time to load. please advice.

Dear Dishant,
Error as follows:
500 Internal Server Error is returned for HTTP request [http://sapprtlclus:50100/webdynpro/resources/sap.com/pb/PageBuilder]:
component [dispatcher],
web module [webdynpro/resources/sap.com/pcui_gp~xssutils],
application [sap.com/pcui_gp~xssutils],
DC name [sap.com/pcui_gp~xssutils],
CSN component[CA-GTF-TS-XSS],
problem categorization [],
internal categorization [1657115376].
[EXCEPTION]
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exception was thrown in preprocessing phase of application session lVF7nzKWRpXYazTzysiRjA--A*GK0SXT8TnfXfHX91En3w--/pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.areagroup_overview/com.sap.pct.erp.ess.overview/sap.com/pcui_gp~xssutils/XssMenu/base/. The causing exception is nested. RID=579178403e4911e4c0f70000010f2eda
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doPreprocessing(ApplicationSession.java:663)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:349)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:326)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:62)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.service(DispatchHandlerForRequestManager.java:39)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.service(DispatchHandlerForRequestManager.java:46)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:292)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToAppContext(ExecutionContextDispatcher.java:68)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:53)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:245)
at com.sap.tc.webdynpro.clientserver.embedding.JavaApplicationProxy$Runner.callRequestManager(JavaApplicationProxy.java:1244)
at com.sap.tc.webdynpro.clientserver.embedding.JavaApplicationProxy$Runner.callEmbeddedApplication(JavaApplicationProxy.java:1122)
at com.sap.tc.webdynpro.clientserver.embedding.JavaApplicationProxy$StartCommand.doExecute(JavaApplicationProxy.java:1575)
at com.sap.tc.webdynpro.clientserver.embedding.JavaApplicationProxy$AbstractCommand.execute(JavaApplicationProxy.java:1488)
at com.sap.tc.webdynpro.clientserver.embedding.JavaApplicationProxy$Runner.execute(JavaApplicationProxy.java:1028)
at com.sap.tc.webdynpro.clientserver.embedding.JavaApplicationProxy.execute(JavaApplicationProxy.java:859)
at com.sap.tc.webdynpro.clientserver.embedding.JavaApplicationProxy.start1(JavaApplicationProxy.java:637)
at com.sap.tc.webdynpro.portal.pb.impl.JavaApplicationProxyAdapter.create(JavaApplicationProxyAdapter.java:166)
at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1691)
at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:411)
at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:655)
at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:227)
at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:137)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:161)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:227)
at com.sap.tc.webdynpro.progmodel.components.Component.initController(Component.java:258)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:206)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:590)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doPreprocessing(ClientApplication.java:1457)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doPreprocessing(ApplicationSession.java:660)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:349)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:326)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
at com.sap.tc.webdynpro.serverimpl.wdc.DispatcherServlet.doContent(DispatcherServlet.java:89)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doPost(AbstractDispatcherServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:152)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:38)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:466)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:210)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:441)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:430)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:81)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:278)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.SessionSizeFilter.process(SessionSizeFilter.java:26)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Caused by: com.sap.tc.webdynpro.services.exceptions.ApplicationFaultException: wdDoInit: exception thrown in this user coding area
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:164)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:227)
at com.sap.tc.webdynpro.progmodel.components.Component.initController(Component.java:258)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:206)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:590)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doPreprocessing(ClientApplication.java:1457)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doPreprocessing(ApplicationSession.java:660)
... 75 more
Caused by: com.sap.tc.webdynpro.progmodel.context.DictionaryException: failed to create provider: com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: Parameter containing a user ID is missing: neither user nor user alias nor external ID nor SSO ticket nor X.509 certificate is specified{jco.client.lang=EN, jco.client.client=300, jco.client.passwd=<null>, jco.client.mshost=sapprdcluster, jco.client.group=SAPPRDCLUS, jco.client.r3name=PRD}
at com.sap.tc.webdynpro.progmodel.context.DictionaryHandler.getScalarType(DictionaryHandler.java:378)
at com.sap.tc.webdynpro.progmodel.context.DictionaryHandler.getDataType(DictionaryHandler.java:126)
at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:438)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:1002)
at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:294)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:974)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:978)
at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:67)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:205)
at com.sap.tc.webdynpro.progmodel.components.Component.getCustomControllerInternal(Component.java:668)
at com.sap.tc.webdynpro.progmodel.components.Component.getController(Component.java:597)
at com.sap.tc.webdynpro.progmodel.components.Component.getController(Component.java:552)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.getPublicInterface(DelegatingComponent.java:275)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetBackendConnectionsController(InternalFPMComponent.java:190)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:204)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:105)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:161)
... 81 more
Caused by: com.sap.dictionary.runtime.DdException: failed to create provider: com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: Parameter containing a user ID is missing: neither user nor user alias nor external ID nor SSO ticket nor X.509 certificate is specified{jco.client.lang=EN, jco.client.client=300, jco.client.passwd=<null>, jco.client.mshost=sapprdcluster, jco.client.group=SAPPRDCLUS, jco.client.r3name=PRD}
at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:291)
at com.sap.dictionary.runtime.ProviderFactory.getProvider(ProviderFactory.java:161)
at com.sap.dictionary.runtime.DdDictionaryPool.getProvider(DdDictionaryPool.java:98)
at com.sap.dictionary.runtime.DdDictionaryPool.makeDictionary(DdDictionaryPool.java:77)
at com.sap.dictionary.runtime.DdDictionaryPool.makeDictionary(DdDictionaryPool.java:65)
at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:230)
at com.sap.tc.webdynpro.progmodel.context.DictionaryHandler.getScalarType(DictionaryHandler.java:370)
... 97 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:271)
... 103 more
Caused by: com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: Parameter containing a user ID is missing: neither user nor user alias nor external ID nor SSO ticket nor X.509 certificate is specified
at com.sap.mdi.jco6.Factory.makeException(Factory.java:33)
at com.sap.mdi.jco6.Destination.connect(Destination.java:57)
at com.sap.dictionary.runtime.mdi.DataProvider.<init>(DataProvider.java:97)
at com.sap.dictionary.runtime.mdi.DataProvider.<init>(DataProvider.java:115)
... 108 more
Caused by: com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: Parameter containing a user ID is missing: neither user nor user alias nor external ID nor SSO ticket nor X.509 certificate is specified
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:559)
at com.sap.mw.jco.MiddlewareJRfc$Client.initialize(MiddlewareJRfc.java:1071)
at com.sap.mw.jco.JCO$Client.connect(JCO.java:3654)
at com.sap.mdi.jco6.Destination.connect(Destination.java:54)
... 110 more
Caused by: RfcException: [null]
    message: Parameter containing a user ID is missing: neither user nor user alias nor external ID nor SSO ticket nor X.509 certificate is specified
    Return code: RFC_INVALID_PARAMETER(19)
    error group: 101
    key: RFC_ERROR_PROGRAM
at com.sap.mw.rfc.api.RfcOptions.checkLogonData(RfcOptions.java:162)
at com.sap.mw.rfc.api.RfcOptions.checkParameters(RfcOptions.java:345)
at com.sap.mw.jco.MiddlewareJRfc$Client.initialize(MiddlewareJRfc.java:1066)
... 112 more

Sapinst taking long time to load

Hello experts,
we are installing sapnw730 PI.
we have noticed that the SAPinst taking long time to load ( near about 45 mins) for every time.
Once sapinst starts we dont find any slowness during the installation and the system behaves quite normal.
On the same host we installed sapnw7.1 BI, that took very less time to load.
Any clues to reduce the SAPinst load time ? , anyone encounter this error before?
system details : SUN Solaris SPARC with 8GB RAM and no other instances running on the host.
thanks in advance

We have enough memory (8 GB Ram)
we have monitored other process and CPU usage during SAPinst run time.
our CPU utilization was 50 % only during SAPinst
Any other clues ??
Thanks

Finder (Snow Leopard 10.6.8) taking long time to load contents of any directory. Please help?

In my macbook pro 5,2 snow leopard (10.6.8), Finder taking long time to load contents of any directory. Please help?
I have already tried to spotlight re-indexing but it did not help. I am hardly able to work on it, almost for each directory I browse its keeps on spinning for 1min.

Download iTunes from Apple's web site and install it. Don't use Software Update.

Problem with JSP taking long time to load.

Hi,
we have three server of oracle apps 10.1.3.
only on one server we are getting problem.
the problem is some jsp pages are taking long time to load and ssome times they dont evn load completly. half of the page is loaded and dont give any error message in opmn log.
the same pages are working fyn in other servers .
plesae help me.....

This only happens in Photoshop 32 bit. Works fine in 64 bit.

Rtf template taking long time to load xml

Dear All
rtf template taking long time to load xml and Insert fields. I am using MS office2010. It was working before.
can any one help me out.
Regards
Arifuddin

Hi;
Pelase review below which could be helpful for you
XML Publisher Report Issues, Recommendations and Errors [ID 862644.1]
Regard
Helios

Process Chain taking long time in loading data in infocube

Similar Messages

Maybe you are looking for