Process message according to a condition

Gentlemen,
I created a process, which modifies a table column when a certain button is pressed.
I want to modify the column in that case only, if the sysdate is later than the "begindate" column of the table. So I modified my process to be conditional.
It works fine, however I want to notify the user, if the process is not executed because of the condition.
I'd like to put a message something like: "The event has not started so far".
I tried to put this message to the Process Error Message region, but it did not work. I think this is not an error, just the condition result was FALSE.
What is the way to give the above message to the user, according to the condition ?
Thanks, Attila v

i'd probably do this: i'd use similar logic from your Condition to set some hidden item in your app that serves as a flag. set that flag up to get set just before your update process. next, i'd make your update process run based on a condition that checks the flag (so you don't have to check your table values twice). lastly, i'd have the next page of your app conditionally display a region with your "The event has not started so far" message if your flag item indicates as much.
hope this helps,
raj
ps-if your update process is regular pl/sql, there's even more flexibility wrt how you set your flag and display your message. you could set your success/didnt_process message to an item within that process, for example, and refer to the item in your process success message using the &ITEM_NAME. syntax.

Similar Messages

  • PP-PI - Process message processing and batch management in PI_CONS message

    Hi All,
    Hope you can help me to find the better solution... I will try to explain my scenario
    Scenario: to control the production run PP-PI module is in use. Process order are created in SAP system and then transferred to the process control system where the execution of the process order is controlled On-line. Once per month the confirmations are transferred from this control system to SAP. In the Process control system batch are not managed. For good issue posting standard process message PI_CONS is used.
    Now we have the situation that some raw materials used for process order processing are managed with batch. During the process order creation the batch related with this raw materials can be determined, only during the month when the raw material is entered in the plant is where the batch is determined. At the end of the month the batch of this materials is available in the SAP system (not in the process control system). Due to behavior of PI_CONS regarding batch if this characteristic is not informed in the process message or in the reservation an issue is trigger.My doubts are:
    1.- If I need inform the batch  during this confirmation ,an even split the quantities in the process message according the batch availability, I'm force to use a custom process message or there is other workaround? (remember is not feasible send the batch to the process control system)
    2.- probably i miss something because I'm can't debug the execution of the process message. How can I debug the execution of a manually created process message?
    Sorry for the long explanation I try to explain my scenario as better as possible.
    Thanks in advance for your valuable inputs.

    Thanks for your replay.
    No really I don't like to make  the batch mandatory, during the good issue is not feasible inform the batch due to it is not managed in the Process Control System. Due to the behavior of PI_CONS if for batch managed materials the batch is not informed in the message or in the reservation an error is trigger. In the reservation snot feasible inform the batch because in that moment is unknown.
    My question is if it is feasible some how have like FIFO batch determination when the process message is processed without creating a custom message.
    Thanks in advance

  • TO not printing in background processing of process message

    Dear Experts,
    We are using PI sheets and process messages to do GR (WM) and then put away to a destination storage bin. TO is getting printed in the default user profile printer when user is manually sending  process message in CO54. But not getting printed when processed by a background job(RCOCB004). We tried even after maintaining the printer in background user but of no use. It only generates the spool and no direct print happening. Kindly let me know if this is the std SAP behavior and any way to control this.
    Thanks
    Rijil

    hi, thanks you reply.
    default delete job is ok.
    but
    default archive job does not work.
    the followding error occured in log.
    Executing ArchiveJob (arvhive job) failed. Reason: java.lang.NullPointerException
    and i have configed something according to:
    [http://help.sap.com/saphelp_nwpi71/helpdata/en/2f/88084136b5f423e10000000a155106/frameset.htm]

  • Archiving Successfuly processed messages

    Hi All
    Problem Area = Not able to Archive Successfuly processed messages for Inbound messages.
    I have to archive successfully processed messages both Outbound messages and Inbound messages.
    I am going into SXMB_ADM --> Define Interfaces for Archiving and Retention Periods
    Under this I have added my Sender Interface and Receiver Interface details and defined retention period too (details added for both outbound messages and Inbound Messages).
    Now the problem I am facing is -
    The messages which are coming from R3 to XI means Outbound messages w.r.t R3 are successfully getting archived and I cannot see messages older then 3 days.
    But the messages which are going from XI to R3 means Inbound messages w.r.t R3 are not successfully getting archived and I can see data for last year also.
    Can any body please suggest me what could be the reason behid this.
    Regards
    Dheeraj kumar

    Hi
    Number of messages already flagged for archiving
    - Messages to be archived:            0
    Number of archived messages that can now be deleted
    - Messages to be deleted:          0
    According to report 0 messages are to be archived but Today I have configured one scenario under Define Interfaces for Archiving and Retention Period. After defining there I scheduled the archive job. Now when I am checking messages for ths scenario I can see all messages still lying there in moni.
    For scenarios IDOC to file archiving is working and for scenarios FILE to IDOC its not working. Something is wrong but where not able to identify.
    Regards
    Dheeraj Kumar

  • No Disk error/Exception Processing Message keeps appearing

    THIS IS A BUG!
    When I have a song listed in itunes but it can't find it on my hard disk, I get the message:
    WINDOWS - NO DISK
    Exception Processing Message c0000013 Parameters 75b6f9c 756bf9c 75b6f9c
    CANCEL TRY AGAIN CONTINUE
    This used to cause my system to HANG everytime it appeared. (Needed a COLD REBOOT.) I reinstalled itunes and now it doesn't hang, but the message shows up frequently! What a pain!

    I get this same message every time I start iTunes. It started happening after my most recent update of QuickTime. I have removed and re-installed both iTunes and QuickTime but I continue to get this exact error message.

  • Confirmation of by-product via process message

    Hi All,
           what are the parameters  - characteristic values that needs to be passed for confirmation of the by product via process message ?
    Regards,
    PSS

    Hi,
    531 Goods receipt from by-product from the order
    The goods receipt of a by-product usually refers to an order, but it can be entered without a reference.
    If a component is entered with a negative quantity in the order, a reservation item is created with
    531 (instead of 261 ). The receipt of a by-product can be entered when the component for the order is withdrawn from stock or it can be entered as an 'other goods receipt'.
    Possible special stock indicators:
    E, Q
    Thnaks,
    Vinodh

  • Function modules used in process message categories

    Hi Gurus,
    in process message characteristics, we need to assign the function modules. please advise is there any place (sap system or any website) where we can find all the function modules which are used in pi sheets? i want to know function modules and their uses or how to use them in pi sheets? if i want to develop new function modules, what should be the criteria, please guide me. thank you for the support.

    Hello
    In addition, on transaction O13C you will find the process message categories and which message destination is assigned to each category.
    Here is the documentation of the message categories:
    Predefined Process Message Categories - PP - PI-PCS Interface: Linking of Process Control Systems - SAP Library
    BR
    Caetano

  • Error while processing message to remote system

    Hi,
    I am trying to load the data from flat file to R/3. I am using the file adapter to pick the file and RFC adapter to transfer into R/3. I am getting the success status in the sxmb_moni and adapter framework(green for both the adapters). But when i check the status in the RWB message monitoring, I am getting the error.
    I am using the message interface defined in the software component for R/3 system which has a different namespace. When i am trying to upload data, i am getting the error as namespace missing in RWB. The detailed error in RWB is as follows:
    Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
    Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara.
    The previous thread relating this is:
    Process Integration (PI) & SOA Middleware
    Requesting for a solution.
    Regards,
    Raghavendra

    Hi,
    >>><i>So i tried creating a RFC(using sm59)in the R/3,
    When i try to import the RFC i have created, I am not able to see the one i have created.</i>
    In your R/3 system, go to se38, enter your RFC name. Go to attributes tab, and click on the radio button named "remote enabled"
    This will enable your RFC to be called by an application outside the R/3 system.
    >>><i>Can you please let me know as to what is it that it is connecting to the R/3(destination) and why am i not able to find my RFC.</i>
    You are tyring to log on to your R/3 system, from xi, in order to import the RFC that you have created. Hence you are asked for user id and password.
    You are not able to find your RFC since it has not been remotely enabled or has not been activated.
    Regards,
    Smitha.

  • File to RFC - error while processing message to remote system:com.sap.aii.

    Hi
    i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
    Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE:      Screen output without connection to user.    
    Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE:      Screen output without connection to user.   
    It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
    But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
    could anyone help.

    Hi
    I am Facing  Following Error When I am trying to call SAP Screen through JCO.jar
    com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
    Please Guide Whethere it is possible to call SAP screen Through JCO.jar  ot NOT
    Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
    Thanks
    Vivek

  • Error while processing message payload Element 'CategoryCode&#39

    Hi Experts,
    I am trying to integrate SAP ECC with TM. I have transferred the sales order from ECC to TM, but its not triggering order based transportation requirement (OTR) instead giving an error Error while processing message payload Element &#39;CategoryCode&#39 and all the xml messages are stuck in inbound queue. The screen shot of the issue is as appended herewith. Please advise.
    Thanks & Regards,
    Aunkur De

    Hi Aunkur,
    The issue will generally  come when a mandatory field in XML which you are not sending either or missed.
    Please check if all mandatory fields are mapped properly.
    Best regards,
    Rohit

  • Error while processing message payload Element PI SXMB_MONI (ECC to TM)

    Dear Experts,
    while processing an XML message in TM using receiver interface IntracompanyTransportationRequestRequest_In , we encounter an error message.
    <SAP:Stack>Error while processing message payload Element &#39;StockTransportOrderReferenceIndicator&#39; missing</SAP:Stack>  
    <SAP:Retry>M</SAP:Retry>
    ssee screenshot attached.
    The field StockTransportOrderReferenceIndicator cannot be located in ECC and I cannot find what the system is expecting to populate here.
    Can somebody propose an approach on how to investigate into this error message for the solution?
    thanks a lot
    Salvador

    Hi Salvador,
    Thanks for your reply. We were able to fix that issue. As of now we have managed to send sales order to TM but getting the following error. Messages are getting failed in SAP TM. Even if the product exists in the system (TM) still the error message persists. I have CIFed location, business partner, product from ECC and everything exists in SAP TM with the same business system group. Kindly advise. Did you happen to face any similar kind of issue during your implementation ?
    Thanks & Regards,
    Aunkur De

  • Error while processing message

    I have WS2RFC interface that use to work. I recieve in the RWB this error message from the RFC Reciever.
    10/6/08 1:20:10 PM aa98b6f0-9398-11dd-94cf-0017a43cc516 Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[RFC_Reciever]07cef9b030ce3c398f109f93020feffb is exhausted. The current pool size limit (max connections) is 1 connections.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[RFC_Reciever]07cef9b030ce3c398f109f93020feffb is exhausted. The current pool size limit (max connections) is 1 connections.
    any ideas?
    Kfir

    In RFC channel increase the maximum connections paramter value to 5. Save and activate.
    Thanks,
    Gujjeti

  • JBO 29114 ADF context is not set up to process messages

    Hi,
    I have created a Rest web service and hosted it on my own IP address..
    I am trying to create a mobile application using the URL data control for the rest service created.
    I get the below error when I do so:
    *"JBO 29114 ADF context is not set to process messages for this exception.Root cause error code is DCA - 50000."*
    The jdev version I am using is 11.1.2.3 and I have created it successfully in Jdev 11.1.1.4.
    Also I have set proxy settings in my HTTP Analyzer and 'Web Browser and Proxy Settings'.
    The proxy seems to work fine and also I have tested the rest service.It seems to be ok.
    Please advice on the error msg.
    Thanks in advance,
    Malathy.

    Malathy,
    as you use a version which is not available to the public (us) I assume that you are an Oracle employee. In this case you should ask this on an internal forum.
    Timo

  • Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

    Dear Guru's,
    I am not able to solve the above issue for last couple of days.
    I am newbie to the webservice
    My Issue...
    I am using Jdeveloper 11.1.2.4.0 Release 2
    1. Using Jdev I built one small Web Service with two methods.
            While testing the Webservice...
                   I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
    2. I created another application to consume the web service i created.
                   1. I added the webservice SOAP and added the method.
                   2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
    3. While executing the created jsf page I received the error message as below
    "oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
    Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
    Can anybody help to solve this issue.
    Thanks and Regards,
    Durai S E

    Dear Guru's,
    I am not able to solve the above issue for last couple of days.
    I am newbie to the webservice
    My Issue...
    I am using Jdeveloper 11.1.2.4.0 Release 2
    1. Using Jdev I built one small Web Service with two methods.
            While testing the Webservice...
                   I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
    2. I created another application to consume the web service i created.
                   1. I added the webservice SOAP and added the method.
                   2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
    3. While executing the created jsf page I received the error message as below
    "oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
    Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
    Can anybody help to solve this issue.
    Thanks and Regards,
    Durai S E

  • ERROR Message while creating Rebate condition record T code VBO1

    Dear Experts,
    I am getting error message while creating rebate condition record T code-VBO1-Error Msg-862 system cannot read the structure for table,because of this i could not create condition record.
    Please give the solution to create condition record.
    Regards
    siva

    Hi,
    You said you are trying to do this stuff in IDES right.
    If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
    This is by our experience.  Today you do something in IDES and tommorow that thing or config is screwed up by others.
    If you have your own IDES, then check the suggestion given by the forum Guru's.
    Regards,
    SB

Maybe you are looking for