Process open items: how to set defaults for the additional selections

Hi FI experts,
Can anyone tell me if it is possible to set defaults for the additional selections in the processing of open items.
I am using transaction F-04 (or F-06 or F-07) to post with clearing.
When processing the open items I can use additional selection parameters. In my case I need to use the document type.  I would like to save this selection as a default but this doesn't seem to be possible.
1. it is not possible to save a variant for the processing of open items
2. I can not create a variant transaction (with trx. SHD0) for F-0x since this is only possible for dialog transactions
Do you see another way to store defaults for the additional selections in open item processing?
Thanks a lot.
Dimitri

Hi,
When you create a transaction variant from FB05, then also you will not able to default the value for additional selections variable.  Hence SHD0 is not going to help.
As said above, either you can change the additional selection screen parameters, but here again you can't default the value.  You can only reduce the number of entries on the screen.
Else you can create a custom transaction code by copying the standard.  Even SAP recommends to create custom codes from standard tcode for clearing purposes depending on requirements. 
Please check this link:
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/41/37b8e7455b11d182b40000e829fbfe/frameset.htm
In the above link, in navigation choose clearing -- Specifications for processing open items
If it is a custom transaction then you can default document number.
Regards,
Ravi

Similar Messages

  • How to set default for "Horizontal / Vertical Alignment"?

    Hi,
    is there somewhere a setting to change the default of the "Horizontal / Vertical Alignment" property for an item label? I don't like the "Right" alignment and I have to change it each time when I create a new item.
    Thanks
    Patrick
    http://inside-apex.blogspot.com

    Yes, this is one of (many) cases where a Bulk edit feature in the Builder would be very useful. There have been some discussions about this and hopefully the APEX team is considering these for the next release.
    Having said that, I frequently find myself taking a full app export and editing the SQL file in my favorite text editor (Vim) and making these little changes.
    This is NOT to be done lightly, see the caveats and disclaimers at Re: htmldb application Disabled(on updation of FLOWS_020000.WWV_FLOW_STEP_I
    As always, take a backup of the file before modifying it and save it so you can revert back to it if something goes wrong.

  • How to set default for ddlb in pcui?

    Hi guys,
    I wrote some coding in FILL_DROPDOWN_LISTBOX method, and right now I want to set default value for my ddlb field. Anyone have experience for this?

    Hi Shen,
    Create first domain for your DDLB field and when you assign this filed in field grp structure select the checkbox for " Domain values".  So that you can see the default values in PCUI screen when launching the page.
    Ex  field name -  suffix            ( Create domain for this field and assign values like Mr.Mrs)
          Field type  - Dropdownlist box
          check box -  Domain Vals 
    Regards
    Raju.

  • How-to set default for selectOneMenu?

    With my code as written, the default positionId is "1".
    Is it possible to specify a diferent default value? If so, how?
    My jsf jsp has the following:
    <h:selectOneMenu value="#{editApproverListBB.positionId}" id="positionId">
    <f:selectItems value="#{dropdowns.gpaPositionDefSelectItems}"/>
    </h:selectOneMenu>
    The generated html is (note the generated selected="selected"):
    <select id="_id0:positionId" name="_id0:positionId" size="1">
    <option value="5">Codes Engineer</option>
    <option value="6">Design Director</option>
    <option value="8">Design Engineer</option>
    <option value="7">Design Manager</option>
    <option value="12">Energy</option>
    <option value="9">General Manager</option>
    <option value="4">Lab Operations Engineer</option>
    <option value="15">Materials Lab</option>
    <option value="11">Other</option>
    <option value="1" selected="selected">PA Director</option>
    <option value="3">PA Engineer</option>
    <option value="17">PA Engineer - Electrical</option>
    <option value="16">PA Engineer - Mechanical</option>
    <option value="2">PA Manager</option>
    <option value="14">Packaging Lab</option>
    <option value="10">Safety Tech Team</option>
    <option value="13">Sound Lab</option>
    </select>
    The SelectItems vector is added to with:
    vector.add(new javax.faces.model.SelectItem(id, desc));
    The id and desc are predefined values from a database code table (order by desc).
    Regards,
    Al Malin

    Set it in the valuebinding of the positionId.
    Basic example:
    public Integer getPositionId() {
        if (positionId == null) {
            positionId = new Integer("10"); // specify default value here.
        return positionId;
    }

  • How to set widescreen for the guest OS (Oracle Linux 5) in Oracle VM 4.1.12

    Hi all
    I have got a concert about how to set the guest system(Oracle Linux5) to use widescreen? appreciate whatever you can help!
    Thanks,

    You're looking for the VirtualBox forums. https://forums.virtualbox.org/
    This forum is for discussion of Oracle VM Server.

  • How to set proxy for the programme

    Hello Everyone
    I am learning Java Network programming. My connection to Internet has a proxy. When I use URL class to download the information from Internet, it cannot work. I think maybe I have not set the proxy in the programme. Does anybody know how to set it?
    Best wishes
    Aaron Cui Lu

    System.getProperties().put( "proxySet", "true" );
    System.getProperties().put( "proxyHost", "proxyMachineName/IP" );
    System.getProperties().put( "proxyPort", "proxyPort" );

  • How to set PS for the most reliable image previews and how to make sure the color spaces are the same across plateforms

    I've been having an ongoing problem with some of my images changing color/luminance values after merging or flattening an image. This seems to most often happen if I use one of the filters (like crosshatch or notepaper, not sharpen or blur). I can make a copy using command/option/shift + E which most often will look exactly like what's on screen.
    Some people have suggested that it's to do with resolution, PS showing me a low resolution image but I don't think so because the histogram changes -- sometimes in a big way, but most often those spikes in the luminance levels are shaved off. Also, when I have the image open at 100% and effect a merge/flatten, the color changes.
    I'd like to know if there's a way to have PS show me one for one what I'm working on while I'm working on it, or if there is a way to control the color profiles when I'm saving. My best guess at this point is that there is a color profile mismatch going on somewhere. I just don't know where to look for it.
    Typically I work in 16 bit, so my color space is set to ProPhoto RGB; my camera is set to the Adobe color space;
    color management policies are set to preserve color profiles;
    conversion options --> intent is set to relative colorimetric.

    But it is calibrated. I use Xrite 1 and update it every month (on the first).
    The colors can be really off. Here's an example.
    https://flic.kr/p/r6A1Zd (what I want) https://flic.kr/p/qc5QTD (not what I want)
    Also, I can't see how the bit depth will have any effect since the change in color happens in PS when I merge or flatten. It's 8 bit through the editing and 8 bit when I flatten it.
    Have you any suggestions on what I can do on the computer side?

  • How to set printersettings for the crystal report viewer in SAP BI dynamically

    Hello
    I have set the URL method for my crystal report and with parameter passing as shown below, it was displaying the crystal report viewer by connecting to the SAP BI 4.0 server with this method.
    http://cr:port/businessobjects/enterprise115/desktoplaunch/opendoc/openDocument.jsp?sDocName=CRLabelParam&sType=rpt&lsSnPrinted=0&lsSsTestProjectNr=1
    This URL will be called from Web application by different users, i would like to set the printer settings differently for different users for this crystal report viewer how shall i need to set the printer options?
    shall i need to set the printer settings programatically for each user. Please advise me how do i need to proceed.
    Thanks & Regards,
    Rajeswari.

    There are no BI / CR APIs that would do this for you. The way I see it, you'll have to have your own print button and populate it with the correct printer information for each user as they request the report. Of course, alternatively, use the viewer printer button and get the users to choose the correct printer.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • How to set delta for the generic data source(FM)

    Hi Guru,s.
    we have created datasource with FM with using templet RSAX_BIW_GET_DATA_SIMPLE  . we want to set up delta for that funtion module.plz send me any templet for delta setup.My mail ID is [email protected]
    Regards.
    hari

    Hi,
       Use the template RSVD_BW_GET_DELTA_DATA instead.
       Or a little bit of coding can be done using the field L_S_SELECT in RSAX_BIW_GET_DATA_SIMPLE to get the Delta records. If your datasource has a timestamp field which can be used for delta settings in RSO2. The last delta timestamp  is captured in the field L_S_SELECT.
    Use this field as one of the selection criteria in your Select statement. This worked in our case and should be helpful if ur delta field is a Timestamp field.
    Hope this helps...
    Cheers,
    Raj

  • Process open item line layout

    Dear all,
    Tcode f-03 or f-53 or f-28 when click process open item, the system will lead you to process open item screen.
    If I go to menu settings -> line layout and in the line layout screen i choose other variants say by reference, when i use the same transaction say f-03, the process open item not able to show me the default line layout anymore.
    May I know how to set back the default?
    thanks
    rgds

    Hi SAPPER,
    Instead, click on Editing Options tab and maintain the Line Layout variant in that screen and save.
    The option through which you are choosing is just to choose on run time basis, which will not be available the next time. Save it in Editing Options, and it will be available to you next time also when you login.
    Regards,
    SAPFICO

  • Do F-32 Clear Customer and Process Open Items just do BKPF/BSEG adds/chgs ?

    !uestion 1:
    When a user executes F-32 in  "clear customer" and "process open items" modalities, are BKPF and BSEG the only tables that actually get changed via adds or updates?
    Or are there other tables affected as well?
    Question 2:
    If BKPF and BSEG are the only affected tables, can I safely emulate the effect of the F-32 Clear Customer and Process Open Items Modalities by:
    1) examining the BKPF/BSEG records added or changed;
    2) using the appropriate BAPI(s) to accomplish these adds/changes (like BAPI_ACC_DOCUMENT_POST)
    Question 3:
    If BKPF and BSEG are NOT the only tables affected by F-32 Clear Customer and Process Open Items, can I emulate these modalities of F-32 thru an appropriate combinaton of BAPIs ?
    Note:
    The reason Im asking these questions the way I am is because a search  of SDN turns up no really good answer to the question of whether the Clear Customer and Process Open Items modlaities of F-32 can be emulated by one BAPI or a combination of BAPI's.
    So by formulating questions (1-3) the way I have, I'm hoping that someone will provide SDN with a clear and definitive answer to the "F-32 BAPI Emulation" question.
    Thanks for any expert advice anyone can provide.
    Best
    djh

    Actually, the "right" answer in this case is to call CLEAR_DOCUMENTS and model the call after the call in PRELIMINARY_POSTING_ZANF_CLEAR

  • Setting Defaults for Essbase 6.1

    How do you set defaults for the options/global/mouse-actions?Presently, we have to disable the mouse-actions every time we enter Excel. Essbase is overwriting the mouse-actions with Essbase functions every time we enter Excel (it does not save our changes when we exit Excel). We have also tried to work in Essbase with the preferred default settings but this has not helped either.

    Is your Essbase.ini file read-only? (or the windows directory where it is located read-only?) Tim TowApplied OLAP, Inc

  • How to set values to the structure containing a node with cardinality 0..n

    Hello.
    I 'm trying to set values for the node with cardinality 0..n. The node type is "Fields".
    <xsd:complexType name="Field">
       <xsd:sequence>
          <xsd:element name="fieldCode" type="xsd:string"></xsd:element>
          <xsd:element name="displayValue" type="xsd:string" minOccurs="0"></xsd:element>
       </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="Fields">
       <xsd:sequence>
          <xsd:element name="field" type="tns:Field" minOccurs="0" maxOccurs="unbounded"></xsd:element>
       </xsd:sequence>
    </xsd:complexType>
    I  need to set several values for the element "fieldCode" but it has cardinality 0..1 and BPM does not allow it but I did not find any option about how to set values for the structure of type "Fields". Could you help me?
    Best regards,
    Timur Semenchuk

    Hi Marcus,
    If there is no way you could change the cardinality of the node, and thus it can contain 0..n items, I think you should create-and-add a new element programmatically.
    Since the collection can contain zero elements, I would add a 'new' button, which upon clicking adds one new element via:
    IYourNodeElement yourNodeElem = wdContext.nodeYourNode().createYourNodeElement();
    wdContext.nodeYourNode().addElement(yourNodeElem);
    Hope this explains a bit!
    Best,
    Robin van het Hof

  • How to set default path for file open in SQL Developer

    Hi,
    I am new to Oracle SQL Developer. Everytime when I open a file, it will default to the install directory. It is hurtingmy hand because I have to click back to the folder where I put my sql statements.
    Is there any way to set the Home or Work button to point to the location I like? or add anther button to point to my folder? I just don't want to click 5 to 10 times to open a file.

    There are a few things. One is that you can set a working directory for any files you run in the SQL Worksheet i.e. @myfile.sql will pick up this directory.
    You can also set a preference for exporting files.
    Also if you use File -> Open, it should remember where you were the last time, so you hunt the first time, then it remembers for the next time. There is a bug for ctrl-O that always goes back to the original directory, but that has been fixed for the next patch release, so ctrl -O will also remember where you were last.
    The differences here are because we are dependent on the IDE from JDeveloper, and so we don't have full control over the Save and Open dialogs. We are aware of this frustration and are planning to change this for a future release.
    Regards
    Sue

  • How to set default values for boolean columns

    I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
    I've tried to set default value at column level:
    <Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
    Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
    <Default>TRUE</Default>
    </Field>
    and at content type level:
    <FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
    But in any case, when i create a new item with this content type, default value is applied.
    Can anyone tell how to set default values for boolean columns?
    Thanks in advance,
    Regards,
    Sergio

    In the field definition you can set
    <Default>1</Default>
    or
    <Default>0</Default>
    How to set the default value Null?

Maybe you are looking for

  • IPad AiO app: Sharing multiple files/docs at one time?

    iPad AiO remote app:  I cannot share more than one file or doc at a time to Cloud storage, even though you can 'select all' the app does not seem to allow you to share a group at one time.  Is there a work around for this? 

  • How to apply text formatting immediately?

    Hello! I apply text formatting to the empty newly created text flow. It seems to be strange that the formatting is not applied immediately, but when I start editing. The small sample demonstrates the problem. <?xml version="1.0" encoding="utf-8"?> <m

  • How do I copy a file from a flash drive to my iMac

    I am trying to import my contacts from my old PC to my new iMac.  I had all my files transfered by an Apple store tech.  My contacts went to my Address Book.  Which is fine, but I now want to import them into Office for iMac 2011 Outlook.  So I expor

  • Cannot import or see iphoto slide exported movie in imovie

    I made a movie from slides in iphoto. I then decided that a caption might be nice, and went to imovie to add it. iMovie '08 is not able to read the file. It is a .mov, and other movies it reads are .mov, so I cannot fathom why it cannot be read. If I

  • Altering the duration of clips

    Hi all, Losing my FCP forum virginity here. How do I change the duration/speed of a clip on the timeline without it effecting the following clips in the sequence. Even on a clear Video track it shunts everything up with it. Thanks in advance.