Process 'rastertobrother5240' consuming 100% CPU

Hello,
For the past 2 days, a printer process named 'rastertobrother5240' has been starting up intermittently (~4 times a day) and consuming 100% of CPU time. I guess this started happening after I applied a recent printer update. Has anybody faced a similar issue?
Thanks,
Kshitij

I assume you are using a Brother printer. Open Activity Monitor, locate the process and select it then click on the Quit icon in the toolbar and click on the Force Quit button to kill the process. Now open Print & Fax preferences and CTRL- or RIGHT-click in the printer list on the left, then select Reset Printing System from the contextual menu. If you have not installed the Brother printer driver update from Apple then download it here.
Now do the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Install the printer package update. If you installed it already then reinstall it. Now re-Add your printer and see if everything is OK. If it isn't then you may be having a problem with the Brother software for your printer. Check Brother's site for any updated software and/or contact their tech support for additional help.

Similar Messages

  • Some Oracle processes are consuming 100% CPU

    Hi,
    Some of my oracle processes are consuming most amount of cpu continuously.What are the general steps to sort out this problem.I think the query is a tuned one.

    Hi,
    What is your veriosn of Oracle? what is the OS? which oracle process is consuming 100% CPU? how did u find out it is conuming?
    and you have mentiond query is tuned one... it does your query is taking time to execute?
    there is no clarity in your question...
    Regards,
    Vijayaraghavan K

  • One boe_jobcd process allways consuming 100% CPU

    Hi, I am running  Crystal reports server XI R2 Linux     on RHEL4
    Normally we have from 1 up to 4  boe_jobcd  processes depending on the "load" of our system, The processes seems to shutdown when not needed, But now  one of the 4 BOE_JOBCD processes will never die and it is consuming 100% cpu...
    Can I stop/kill the process?  How ?
    Edited by: Sofia Modee on Jul 3, 2009 10:41 AM
    Edited by: Sofia Modee on Jul 3, 2009 10:41 AM
    Edited by: Sofia Modee on Jul 3, 2009 10:42 AM

    Dear Both,
    I traced the RAS server as suggested by Tim and obtained a log that - I have to admit - is quite difficult for me to understand. Could I send it to one of you for examination? Thanks in advance.
    Ted, please find below my answers to your questions:
    Just to close out possible data source issues, are the reports going against Business Views or Universes?
    The report is based on Business Views.
    Do you have Processing Extensions specified for the reports?
    Sorry but what are Processing Extensions?
    Also, when you checked in the Crystal Reports Designer, was it Designer installed on the same machine where the page server and RAS server is running?
    Yes, it is installed on the same machine.
    Also, since it affects both Page Server and RAS, it may require CRPE traces to get to the bottom of this (CRPE - 'creepy' - is the CR engine used by both the Page and RAS server).
    I will certainly open a case with SAP to have them help me on that.
    Thank you both for your help. It is very appreciated.

  • Oracle.exe consuming 100% CPU on windows and database hang

    Hi all,
    every time my oracle database is hanging when the application run, the problem is the oracle.exe consum 100% CPU but not memory and the server hang and the dabase is going to inaccessible, we need to restart oracle instance service or server to bring the databas eback to normal but it's not permanent because the problem occurs once the application turn on.
    Checking the log file i found the below error every time:
    My database version is 9.2.0.7.0
    OS: Windows 2003 Server Standard Edition Service Pack 2
    RAM: 3,5Gb
    CPU: Inte Xeon 3.20 GHz
    ORA-00600: internal error code, arguments: [kghuclientasp_03], [0xBFEADCE0], [0], [0], [0], [], [], []
    ORA-29913: error in executing ODCIEXTTABLEFETCH callout
    ORA-29400: data cartridge error
    KUP-04050: error while attempting to allocate 163500 bytes of memory
    ORA-06512: at "SYS.ORACLE_LOADER", line 14
    ORA-06512: at line 1
    Fri Mar 05 05:35:15 2010
    Errors in file e:\oracle\admin\optprod\udump\optprod_ora_5876.trc:
    ORA-00603: ORACLE server session terminated by fatal error
    ORA-04030: out of process memory when trying to allocate 8389132 bytes (pga heap,redo read buffer)
    ORA-04030: out of process memory when trying to allocate 8389132 bytes (pga heap,redo read buffer)
    ORA-04030: out of process memory when trying to allocate 8180 bytes (callheap,kcbtmal allocation)
    Thank you
    Lucienot.

    Is this a new application on this database?
    Has it run well in the past?
    I have had this happen before on a 32bit Windows server. Our problem was a poorly written procedure that kept pegging the cpu to 100%. You should be able to figure out what SQL is being used that is causing this problem, it will be the Top Working SQL most likely.
    I also had this problem on a Logical Standby server which was trying to apply SQL to the SYS.AUD$ table. As soon as SQL Apply was started, the CPU went to 100%. Once I truncated that table, the cpu usage went back to normal. Not sure what you are using to monitor your database but if you can, try to find out what SQL is running when your CPU goes to 100%.

  • Why does my iWork update hang with zsh consuming 100% cpu?

    The App Store updates for iWork Apps (Numbers, Keynote, Pages) have hung for me multiple times.  After some digging, the hangs appear related to setting zsh as my default shell (Open Directory UserShell /bin/zsh).  When an update is hung in App Store, Activity Monitor shows zsh is consuming ~100% cpu.  Inspecting the process, it's hung on zsh -c defaults delete com.apple.helpd com.apple.helpd.sdmMapsCreated or something similar each time.  If I kill the hung process enough times, eventually the update completes.
    Most recently encountered updating to Numbers 3.5.2 on OS X 10.10.1 with $SHELL=/bin/zsh 5.0.5 (x86_64-apple-darwin14.0).
    Possibly related to keynote not installing. 
    Definitely related to http://apple.stackexchange.com/questions/146919/zsh-using-100-of-cpu-during-iwor k-install.  The workaround described here is the only way I've gotten through it.

    You probably deleted something crucial to the stability of the operating system. I suggest backing up your important files, and doing a complete reinstall.

  • Oracle.exe is consuming 100% cpu o windows

    Hi,
    We have 6 oracle 10g database on windows box and from task manager we are able to see oracle.exe is consuming 100% cpu
    Need to know this oracle.exe belongs to which database and can i get the sql for this process
    Thanks

    On my Vista PC, I find that the easiest way to identify which instance an oracle.exe is, is the task manager. On the Processes tab, right-click the oracle.exe and then click Go To Service(s) and that takes me to the OracleServiceORCL or whichever insance it is.
    I'm sure there is a better way that a Windows person could tell us about. Then having identified the instance, it is just normal tuning from there.

  • After starting up the listener the server consuming 100% CPU

    Hi,
    when i startup the database tier (EBS 12.1.3 and DB 11.2.0.2) its stared well and the CPU usage is normal.But when i start the listener the server (RHEL 5.8) start consuming 100% CPU.
    alert.log details
    in file /ebs/UAT/bin/db/tech_st/11.2.0/admin/UAT_dcvlodbdev/diag/rdbms/uat/UAT/trace/UAT_j000_7601.trc:
    ORA-00600: internal error code, arguments: [13011], [262414], [1644193998], [33], [1644194002], [0], [], [], [], [], [], []
    ORA-06512: at "APPS.WF_BES_CLEANUP", line 488
    ORA-06512: at line 1
    Wed Dec 12 10:11:33 2012
    Sweep [inc][480592]: completed
    Wed Dec 12 10:13:17 2012
    Errors in file /ebs/UAT/bin/db/tech_st/11.2.0/admin/UAT_dcvlodbdev/diag/rdbms/uat/UAT/trace/UAT_j001_7624.trc (incident=480612):
    ORA-00600: internal error code, arguments: [13011], [262414], [1644193998], [33], [1644194002], [0], [], [], [], [], [], []
    Use ADRCI or Support Workbench to package the incident.
    See Note 411.1 at My Oracle Support for error and packaging details.
    Errors in file /ebs/UAT/bin/db/tech_st/11.2.0/admin/UAT_dcvlodbdev/diag/rdbms/uat/UAT/trace/UAT_j001_7624.trc:
    ORA-00600: internal error code, arguments: [13011], [262414], [1644193998], [33], [1644194002], [0], [], [], [], [], [], []
    ORA-06512: at "APPS.WF_BES_CLEANUP", line 488
    ORA-06512: at line 1
    Wed Dec 12 10:13:18 2012
    Sweep [inc][480612]: completed
    Wed Dec 12 10:14:18 2012
    Errors in file /ebs/UAT/bin/db/tech_st/11.2.0/admin/UAT_dcvlodbdev/diag/rdbms/uat/UAT/trace/UAT_ora_7814.trc (incident=481092):
    ORA-00600: internal error code, arguments: [kdsgrp1], [], [], [], [], [], [], [], [], [], [], []
    Incident details in: /ebs/UAT/bin/db/tech_st/11.2.0/admin/UAT_dcvlodbdev/diag/rdbms/uat/UAT/incident/incdir_481092/UAT_ora_7814_i481092.trc
    Wed Dec 12 10:14:23 2012
    Dumping diagnostic data in directory=[cdmp_20121212101423], requested by (instance=1, osid=7814), summary=[incident=481092].
    Use ADRCI or Support Workbench to package the incident.
    See Note 411.1 at My Oracle Support for error and packaging details.
    Wed Dec 12 10:14:24 2012
    Sweep [inc][481092]: completed
    Sweep [inc2][481092]: completed
    Wed Dec 12 10:16:50 2012
    Errors in file /ebs/UAT/bin/db/tech_st/11.2.0/admin/UAT_dcvlodbdev/diag/rdbms/uat/UAT/trace/UAT_j001_8058.trc (incident=481492):
    ORA-00600: internal error code, arguments: [13011], [262414], [1644193998], [33], [1644194002], [0], [], [], [], [], [], []
    Use ADRCI or Support Workbench to package the incident.
    See Note 411.1 at My Oracle Support for error and packaging details.
    Errors in file /ebs/UAT/bin/db/tech_st/11.2.0/admin/UAT_dcvlodbdev/diag/rdbms/uat/UAT/trace/UAT_j001_8058.trc:
    ORA-00600: internal error code, arguments: [13011], [262414], [1644193998], [33], [1644194002], [0], [], [], [], [], [], []
    ORA-06512: at "APPS.WF_BES_CLEANUP", line 488
    ORA-06512: at line 1
    Wed Dec 12 10:19:04 2012
    Incremental checkpoint up to RBA [0xf.ac257.0], current log tail at RBA [0xf.c3691.0]
    Wed Dec 12 10:20:56 2012
    Active Session History (ASH) performed an emergency flush. This may mean that ASH is undersized. If emergency flushes are a recurring issue, you may consider increasing ASH size by setting the value of ASHSIZE to a sufficiently large value. Currently, ASH size is 2097152 bytes. Both ASH size and the total number of emergency flushes since instance startup can be monitored by running the following query:
    select total_size,awr_flush_emergency_count from v$ash_info;
    Wed Dec 12 10:21:26 2012
    Sweep [inc][481492]: completed

    Please see these docs.
    ORA-600/ORA-7445/ORA-700 Error Look-up Tool [ID 153788.1]
    ORA-600 [13011] "Problem occurred when trying to delete a row" [ID 28184.1]
    Workflow Control Queue Clean Up Program Fails With ORA-25226 [ID 334237.1]
    Thanks,
    Hussein

  • Explorer.exe consuming 100% CPU after resuming from hibernation

    Hello,
    For the last months, I repeatedly have the problem that sometimes (every 2nd or 3rd time) after resuming from hibernation, in a few cases also after disconnecting from the Internet, one or more instances of explorer.exe are consuming 100% CPU, but never
    the shell instance.
    I tried figuring out what it was doing, but I was unsuccessful so far.
    Here is a stack of the thread which consumed most of the CPU:
    0, ntoskrnl.exe!KiDeliverApc+0x166
    1, ntoskrnl.exe!KiSwapThread+0x31f
    2, ntoskrnl.exe!KiCommitThreadWait+0x129
    3, ntoskrnl.exe!ExpWaitForResource+0x29f
    4, ntoskrnl.exe!ExEnterPriorityRegionAndAcquireResourceExclusive+0x1ad
    5, win32k.sys!EnterCritAvoidingDitHitTestHazard+0x13
    6, win32k.sys!NtUserMessageCall+0x28
    7, ntoskrnl.exe!KiSystemServiceCopyEnd+0x13
    8, user32.dll!NtUserMessageCall+0xa
    9, user32.dll!SendMessageWorker+0x168
    10, user32.dll!SendMessageW+0xfb
    11, ExplorerFrame.dll!CNscTree::_TreeInvalidateItemInfo+0xd0
    12, ExplorerFrame.dll!CNscTree::_EnumBackgroundDone+0xb4a14
    13, ExplorerFrame.dll!CNscTree::OnQIUpdateEnumDone+0x93
    14, ExplorerFrame.dll!CNscEnumQueueItem::Dispatch+0xcf
    15, ExplorerFrame.dll!CTaskLock::DispatchQueueItem+0xc5
    16, ExplorerFrame.dll!CNscTree::_SubClassTreeWndProc+0x118
    17, ExplorerFrame.dll!CNscTree::s_SubClassTreeWndProc+0x5f
    18, comctl32.dll!CallNextSubclassProc+0xe0
    19, comctl32.dll!MasterSubclassProc+0xa2
    20, user32.dll!UserCallWinProcCheckWow+0x149
    21, user32.dll!DispatchMessageWorker+0x1a7
    22, AppVEntSubsystems64.dll!VirtualizeCurrentThread+0x1e492
    23, ExplorerFrame.dll!CExplorerFrame::FrameMessagePump+0xe3
    24, ExplorerFrame.dll!BrowserThreadProc+0x5e
    25, ExplorerFrame.dll!BrowserNewThreadProc+0x3a
    26, ExplorerFrame.dll!CExplorerTask::InternalResumeRT+0x12
    27, ExplorerFrame.dll!CRunnableTask::Run+0x114
    28, shell32.dll!CShellTaskThread::ThreadProc+0x2a3
    29, shell32.dll!CShellTaskThread::s_ThreadProc+0x2f
    30, SHCore.dll!StrRetToBSTR+0x19f
    31, kernel32.dll!BaseThreadInitThunk+0x22
    32, ntdll.dll!RtlUserThreadStart+0x34
    I was hoping I could identify a rogue shell extension or something similar, but I didn't find any such evidence so far.
    In case you need this information, this is a list of my shell extensions/copy hooks/context menu handlers/drag&drop handlers (without duplicates):
    + " SkyDrivePro1 (ErrorConflict)" "Microsoft OneDrive for Business Extensions" "Microsoft Corporation" "c:\program files\microsoft office 15\root\vfs\programfilesx64\microsoft office\office15\grooveex.dll" "12.11.2014 01:13"
    + "{C52AF81D-F7A0-4AAB-8E87-F80A60CCD396}" "" "Apache Software Foundation" "c:\program files (x86)\openoffice 4\program\shlxthdl\shlxthdl.dll" "20.09.2013 12:50"
    + "{C52AF81D-F7A0-4AAB-8E87-F80A60CCD396}" "" "Apache Software Foundation" "c:\program files (x86)\openoffice 4\program\shlxthdl\shlxthdl_x64.dll" "20.09.2013 12:41"
    + "7-Zip" "7-Zip Shell Extension" "Igor Pavlov" "c:\program files\7-zip\7-zip32.dll" "18.04.2011 19:34"
    + "7-Zip" "7-Zip Shell Extension" "Igor Pavlov" "c:\program files\7-zip\7-zip.dll" "18.04.2011 19:35"
    + "ANotepad++64" "ShellHandler for Notepad++ (64 bit)" "" "c:\program files (x86)\notepad++\nppshell_06.dll" "12.05.2014 10:49"
    + "Ath_CopyHook" "Bluetooth File Transfer Plugin" "Qualcomm®Atheros®" "c:\program files (x86)\bluetooth suite\folderviewimpl.dll" "25.09.2013 10:58"
    + "Atheros" "Atheros Bluetooth Module" "Qualcomm®Atheros®" "c:\program files (x86)\bluetooth suite\btvappext.dll" "25.09.2013 10:58"
    + "DropboxExt" "Dropbox Shell Extension" "Dropbox, Inc." "c:\users\david\appdata\roaming\dropbox\bin\dropboxext64.24.dll" "24.06.2014 01:32"
    + "DropboxExt1" "Dropbox Shell Extension" "Dropbox, Inc." "c:\users\david\appdata\roaming\dropbox\bin\dropboxext.24.dll" "24.06.2014 01:31"
    + "FTShellContext" "Atheros Bluetooth Module" "Qualcomm®Atheros®" "c:\program files (x86)\bluetooth suite\shellcontextext.dll" "25.09.2013 10:58"
    + "GDContextMenu" "Google Drive shell extension" "Google" "c:\program files (x86)\google\drive\contextmenu64.dll" "16.01.2015 01:57"
    + "GDriveBlacklistedOverlay" "Google Drive shell extension" "Google" "c:\program files (x86)\google\drive\googledrivesync64.dll" "16.01.2015 01:56"
    + "igfxcui" "igfxpph Module" "Intel Corporation" "c:\windows\system32\igfxpph.dll" "09.09.2013 18:26"
    + "LockHunterShellExt" "LockHunter Explorer Extension" "Crystal Rich Ltd" "c:\program files\lockhunter\lhshellext32.dll" "25.03.2009 08:53"
    + "LockHunterShellExt" "LockHunter Explorer Extension" "Crystal Rich Ltd" "c:\program files\lockhunter\lhshellext64.dll" "28.04.2009 10:21"
    + "PDF Shell Extension" "PDF Shell Extension" "Adobe Systems, Inc." "c:\program files (x86)\common files\adobe\acrobat\activex\pdfshell.dll" "11.05.2013 10:34"
    + "PushbulletCtx" "" "" "File not found: :/Program Files (x86)/Pushbullet/pushbullet_ctx.DLL" ""
    + "RecuvaShellExt" "Recuva shell extensions" "Piriform Ltd" "c:\program files\recuva\recuvashell64.dll" "14.03.2014 12:41"
    + "SD360" "360 Total Security" "" "c:\program files (x86)\360\total security\menuex64.dll" "12.01.2015 03:55"
    + "SourceGearDiffMergeShellExtension32" "SourceGear DiffMerge ShellExtension 32" "SourceGear LLC" "c:\program files (x86)\sourcegear\common\diffmerge\sourcegeardiffmergeshellextension32.dll" "23.10.2013 19:15"
    + "SourceGearDiffMergeShellExtension64" "SourceGear DiffMerge ShellExtension 64" "SourceGear LLC" "c:\program files\sourcegear\common\diffmerge\sourcegeardiffmergeshellextension64.dll" "23.10.2013 19:17"
    + "StartMenuExt" "Start Menu Helper Extension" "IvoSoft" "c:\windows\syswow64\startmenuhelper32.dll" "20.04.2014 18:17"
    + "StartMenuExt" "Start Menu Helper Extension" "IvoSoft" "c:\windows\system32\startmenuhelper64.dll" "20.04.2014 18:16"
    + "WinRAR32" "WinRAR shell extension" "Alexander Roshal" "c:\program files\winrar\rarext32.dll" "02.12.2014 11:07"
    + "WinRAR" "WinRAR shell extension" "Alexander Roshal" "c:\program files\winrar\rarext.dll" "02.12.2014 11:07"
    + "WinSCPCopyHook" "Drag&Drop shell extension for WinSCP (64-bit)" "Martin Prikryl" "c:\program files (x86)\winscp\dragext64.dll" "14.08.2013 12:22"
    I you have any clue what might be going, I would be very happy to hear it. It's really annoying, as I have to kill explorer.exe and thereby close all my folder windows when this happens.
    Thank you!
    Best regards,
    David Trapp

    Hello,
    thanks for having a look. However, I already ran SFC before posting on this forum (as part of my own investigation) and it came back clean. RescueTime (a time tracking tool) is probably not the culprit because it happened also several times in the past without
    RescueTime being running (that was because I had accidentally removed it from autorun at that time).
    Unfortunately, I can't follow your "invalid date" explanation. I don't think an "invalid date" is anywhere involved; in fact, the method in question is called "_TreeInvalidateItemInfo" and not "_TreeInvalidDateItemInfo"
    (note that there is only one "d"), so I assume its job is just to invalidate (and in turn, refresh) the cached information about nodes in the left pane's folder tree of the explorer window(s) - since the folder tree is the only NamespaceTreeControl
    (whose corresponding class name is CNscTree) in explorer folder view windows. As I see it, something is causing explorer to repeatedly refresh the folder tree data, but I am stuck at finding out what exactly.
    Best regards,
    David Trapp
    EDIT: Disassembling ExplorerFrame!CNscTree::_TreeInvalidateItemInfo confirms that, because it seems to call TreeView_SetItem for a tree node and its parent (possibly with all fields set to *_CALLBACK), and CNscTree::_UpdateItemDisplayInfo
    for the parent node.
    EDIT2: I'd love to dig more into the trace, however I am hitting a wall at function names/addresses. Everywhere where I would expect a function name/address (such as the "by stack" views), I only see question marks instead. What
    could be the reason?

  • BT NetProtect intermitantly consuming 100% CPU

    Hi, I have Infinity install and all is working fine, I installed the BT NetProtect secuity software and find that every so often it suddeny consumes 100% cpu and my PC slows to halt for about 1 or 2 seconds. This happens randomly through the day sometime 20 times over an hour, sometime once every 4 or 5 hours.
    At first I have disabled various functions such as the rteal time scanning etc but it still causing a problem. Uninstall the software and the problem is resolved - re-install and problem back again.
    Watch the Performance monitor under the Task Manager and you can see the CPU max out when the problem is experienced.
    Any one else with this problem and any ideas for a solution.
    All help greatly received.
    Steven

    Without more detailed info I wouldn't like to guess on why it's using 100% cpu, sone older McAffee products that I have used have been pretty resource hungry but 100% dosen't sound right at all! Although I have never used it myself there are many good free alternatives.
    I have tried many AV solutions and Firewalls on my Windows Machines over the years inc BitDeffender, Avast, NOD32, Avira, AVG, ZoneAlarm, ClamAV.
    Until recently I was running Agnitums Outpost Pro firewall and Eset NOD32 antivirus. Both of which have been very good, NOD is a nice lightweight AV but it's not free.
    Recently I switched to Comodo Internet Scurity Pro which is a free security suite containing comodo's excellent firewall which always rates highly firewall tests, and their equaly impresive AV system if interested you can download it here:-
    comodo.com/home/download/download.php?prod=cis
    Choose the free version its identical to the paid version but without GeekBuddy.
    Also take a look at Avast Free or AVG free.
    If all else fails try Linux

  • Wireportserver.exe is consuming 100% cpu

    Hi Experts,
    We are using SAP BI 4.0 sp6 windows for our BO Application.From last week onwards we are experiencing system freeze as the WIreportserver.exe consuming 100% cpu.we have to manually kill it to make the system work again.Even restarting the servers doesn't help!
    Sometimes this issue happens when if there are no user logged in.Recently there are no changes made to the server.Hence not sure what
    might be the reason behind this.
    Thanks in advance for your help.
    Regards
    Kishore

    I would request you to confirm the below steps.
    1) If you are using Load balance then please increase the Load Balancer idle session timeout .
    2) Can you also do this test: Please do take backup of the file.
    1- Open folder : <Your BO install Folder>\Tomcat55\webapps\AnalyticalReporting\WEB-INF\classes
    2- Edit file : webi.properties
    3- Change the lines :
    #WID_FAILOVER_SIZE=10
    #WID_STORAGE_TOKEN_STACK_SIZE=10
    By:
    WID_FAILOVER_SIZE=0
    WID_STORAGE_TOKEN_STACK_SIZE=0
    4- Save ans close the file
    5- Restart tomcat
    6- check if the issue is resolved
    3) Purge the query and run the same one by one. Once it is done then refresh all the queries. With this we can get to know which query is causing the issue. If you find that few queries are taking long time then foloow the below steps for that specific queries:
    a. . Edit the report and go to Edit Query.
    b. At bottom you can see the name of the Query
    c. Right click on Query and click Duplicate Query. It will create a copy of the original query.
    d. And then delete the original query.
    e. Do the same step for all queries
    f. Run all queries and then test the issue again.
    4) Run the report in Webi Rich Client. If it works then Save the report with different name and in different folder. And export same in Repository. From the Infoview try to refresh the report.
    5) Please check if using Web mode is acceptable workaround.
    6) In Universe Designer> parameter> Controls, uncheck the option 'Limit Execution Time To' and 'Limit Result Set To' parameters. By doing this it will allow users to create queries that have not been tuned, run for extended period of time .
    7) It is always recommended to Schedule the report which are of large size instead of refreshing. I would suggest you to schedule the report to resolve the issue.
    ~Sujeet Sharma

  • Crystalras.exe consuming 100% CPU usage

    Hi everyone,
    When we try to open an instance of one of our Crystal reports from InfoView, the crystalras.exe process runs at 100% CPU usage and the report never shows up. After a few minutes, we get the following message:
    The request timed out because there has been no reply from the server for 600,000 milliseconds.
    Does anyone know where the problem could come from? Could this be because the report is retrieving too much data?
    Thanks in advance for any help.

    Dear Both,
    I traced the RAS server as suggested by Tim and obtained a log that - I have to admit - is quite difficult for me to understand. Could I send it to one of you for examination? Thanks in advance.
    Ted, please find below my answers to your questions:
    Just to close out possible data source issues, are the reports going against Business Views or Universes?
    The report is based on Business Views.
    Do you have Processing Extensions specified for the reports?
    Sorry but what are Processing Extensions?
    Also, when you checked in the Crystal Reports Designer, was it Designer installed on the same machine where the page server and RAS server is running?
    Yes, it is installed on the same machine.
    Also, since it affects both Page Server and RAS, it may require CRPE traces to get to the bottom of this (CRPE - 'creepy' - is the CR engine used by both the Page and RAS server).
    I will certainly open a case with SAP to have them help me on that.
    Thank you both for your help. It is very appreciated.

  • Listener - consuming 100% CPU - problem

    Hi Gurus!
    I have a problem with my Listener in Oracle 10g. When I`m trying to start/stop I see
    +[oracle@ZB ~]$ lsnrctl stop+
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 02-JAN-2010 16:18:47
    Copyright (c) 1991, 2005, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    but listner is not starting. Does anybody knows where can be a problem ? It cant start but listner proces consuming 100% CPU.
    This is my listner.ora
    +# listener.ora Network Configuration File: /opt/oracle/network/admin/listener.ora+
    +# Generated by Oracle configuration tools.+
    SID_LIST_LISTENER =
    +(SID_LIST =+
    +(SID_DESC =+
    +(SID_NAME = PLSExtProc)+
    +(ORACLE_HOME = /opt/oracle)+
    +(PROGRAM = extproc)+
    +)+
    +)+
    LISTENER =
    +(DESCRIPTION_LIST =+
    +(DESCRIPTION =+
    +(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))+
    +(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.129)(PORT = 1521))+
    +)+
    +)+
    and my tnsnames.ora
    +# tnsnames.ora Network Configuration File: /opt/oracle/network/admin/tnsnames.ora+
    +# Generated by Oracle configuration tools.+
    ZKB =
    +(DESCRIPTION =+
    +(ADDRESS = (PROTOCOL = TCP)(HOST = ZKB)(PORT = 1521))+
    +(CONNECT_DATA =+
    +(SERVER = DEDICATED)+
    +(SERVICE_NAME = ZKB)+
    +)+
    +)+
    EXTPROC_CONNECTION_DATA =
    +(DESCRIPTION =+
    +(ADDRESS_LIST =+
    +(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))+
    +)+
    +(CONNECT_DATA =+
    +(SID = PLSExtProc)+
    +(PRESENTATION = RO)+
    +)+
    +)+
    Where can I find logs for Listner ? /oracle/network/logs/listener.log ?
    help...

    I have found a problem... Vmware...
    This is my last Oracle on Virtual Machine...
    Simply reboot of the virtual machine and working again... ehh...

  • "IMAQ Stop" takes 10sec to execute and consumes 100% CPU

    Hi, I'm calling IMAQ Stop to end an acquisition but it consumes 100% of my processor and takes 10sec to complete (all the while consuming 100% CPU).  In our application we start and stop the camera regularly and this is exactly when the user wants the program to be interactive so this 10sec delay is a big irritation to them.
    My setup is - Dalsa Piranha line scan camera, RT 9 running on a desktop PC  (it is compatible according to the test), PCI-1429 cameralink card.
    Any help or comments welcome.
    Thanks.
    Solved!
    Go to Solution.

    Ah I have managed to solve this one, but first here are the answers to your questions:
    Using Stop and then Close or just Close makes no difference.  The Stop was taking so long that I simply used a probe before and after it on the error cluster and with 2009's probe timestamp function I could easily see how long it took.  For more detailed timing analysis I use the us timer available with RT.
    In any case, the way I solved the problem was by making sure that I stop the acquisition BEFORE the line clock to the camera is stopped.  So IMAQ Stop probably waits for the end of the current frame before it returns - and if the line clock stops halfway through a frame (as was the case), a 10 sec timeout probably causes Stop to return eventually. 
    The line clock is being driven by a DAQ card (via RTSI) and I simply closed the session to that counter AFTER calling IMAQ Stop.  The DAQ interface is not shown in the example above as it is coded in a different vi.
    Thanks for all the help. 

  • CustomTableCellRenderer consume 100%CPU

    I have a Table wtih a customTableCellRenderer. I �ve found out that the method getTableCellRendererComponent of my cellRenderer will be repeatly called. Thats why it consumes 100% Cpu.
    Here the setting of table
    tableOverview.setDefaultRenderer(Object.class,new AppointmentStateIconTableCellRenderer());And thats my customTableCellRenderer
    * Created on 03.09.2005
    * TODO To change the template for this generated file go to Window -
    * Preferences - Java - Code Style - Code Templates
    package client.gui;
    import java.awt.Color;
    import java.awt.Component;
    import java.io.IOException;
    import javax.swing.JTable;
    import javax.swing.table.DefaultTableCellRenderer;
    import client.AppointmentStateIcon;
    public class AppointmentStateIconTableCellRenderer extends
              DefaultTableCellRenderer {
         private long init = 0;
         public Component getTableCellRendererComponent(JTable table, Object value,
                   boolean isSelected, boolean hasFocus, int row, int column) {
              Component renderer = null;
              table.setShowGrid(false);
              if (value instanceof AppointmentStateIcon){
                             try {
                        renderer = new AppointmentStateIconTableRenderer(
                                  (AppointmentStateIcon) value);
                   } catch (IOException e) {
              } else {
                   renderer = super.getTableCellRendererComponent(table, value,isSelected, hasFocus,row,column);
              renderer.setForeground(Color.BLACK);
              renderer.setBackground(Color.WHITE);
              return renderer;
    }thx for fast help

    Do not construct a new Renderer everytime when your value is a instance of AppointmentStateIcon. A renderer just act as a rubber-stamp for rendering all cells in the table; it renders the first cell, changes the contents of that cell renderer, shifts the origin to the new location, re-draws it, and so on. Try to overrides the validate, revalidate, repaint, and firePropertyChange methods to be no-ops to help to increase the performance. Read the API Documentation for DefaultCellRenderer for more information.

  • Client process (uniengd) on the Calendar server is consuming 100% CPU usage

    The Calendar client bits in the Communicator 4.5 release (Calendar Build 981008)
    are suspect of hanging the Calendar server when the end user uses the off-line
    feature. The behavior seen will be that a cpu will start climbing and could
    reach 80-100% of usage, which will cause the response time for all other end
    users to be extremely slow and may not even accept any new logins.
    <P>
    The patch for these bits is available via the Smart Update (Windows and Mac) web
    site:
    <P>
    http://home.netscape.com/smartupdate/su1_40.html
    <P> Or you can download the complete version from
    http://home.netscape.com/download/selectplatform_1_361.html
    <P>
    For Unix platforms, you will need to download the compressed tar file
    (available from http://help/filelib.html#nscal)
    and reinstall it.
    <p>NOTE: To verify that you are executing a patched version, in the
    Calendar client:
    <b>Windows platform</b>
    <br>Help menu pulldown, About Netscape Calendar, make sure it has <b>Build
    981104</b> or higher.
    <br><b>Mac platform</b>
    <br>Select the file from your desktop
    <br>File menu pulldown, Get Info. Make sure has a <b>date of 121698, version
    4.51</b> or later.
    <br><b>Unix platform</b>
    <br>Help menu pulldown, About Netscape Calendar, make sure it has is <b>Version
    4.51</b> or higher
    <P>
    The procedure for determining which user of Calendar is causing the server's cpu
    hang is as follows:
    <OL>
    <LI>Using your favorite monitoring tool on the server, note the PID
         (process ID) of the uniengd process that is consuming
    80 - 100% cpu activity.
    <LI>Change directory to /users/unision/db/tmp/PID#
    <LI>Execute the command "strings" on all the files in the directory
         (there are usually not very many):
    <P>
              # strings *
    <P>
         Near the end of the output, you will see the user's name.
    <LI>You can now kill the uniengd process on the server:
    <P>
              # kill PID# (note: do not use the kill -9 unless absolutely
              necessary!)
    <P>
    <LI>Contact the name of the user whose process you looked up and determine
         what version of Calendar client they are using. Immediately inform
         them of your procedure on upgrading to the correct version.
    </OL>

    Hi TrondWH,
    Thanks for contacting Microsoft.
    Currently, would you please try cleaning boot the server and test how the issue goes. Cleaning boot can exclude some third-party application affect. Following are the detailed steps about clean boot:
    Log on to the computer by using an account that has administrator rights.
    Click Start, type msconfig.exe in the Start Search box, and then press ENTER to start the
         System Configuration Utility.
    On the General tab, click Selective Startup, and then click to clear the Load startup items check box. (The Use Original Boot.ini check box is unavailable.)
    On the Services tab, click to select the Hide all Microsoft services check box, and then click Disable all.
    Click OK, Choose Don’t show this message again and then click Restart.
    Please check if the issue is still the same.
    Please let me know the result.
    Best regards,
    Sophia Sun
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for

  • Mac Book fails to boot properly after EFI Firmware 27 update

    hi I have a strange boot issue having (tried) to install EFI 2.7 update. When I restart the laptop, it 'chimes', displays a grey screen ... then chimes, displays a grey screen , ... for ever I hit the bower (off) button for 5 secs or thereabouts, and

  • How I survided Error 1418 after upgrading to itunes 7.0.2

    IT WORKS AGAIN !!!!!!! Problem 5.0 Gen ipod, upgraded to itunes 7.0.2 and got an icon at my ipod with a folder shape. Connecting the ipod gaves a "corrupt ipod" message. Trying to restore ipod gave a 1418 unknown error, tried many things like format

  • Windows 8 graphics not good in vlc player and audio is choppy

    even though everything is fine in windows 8 in my macbook pro 2011 model , videos in vlc player is not of good quality. Audio in youtube makes a strange shrill sound after a while . I have all latets bootcamp drivers installed (amd radeon one for gra

  • What's this icon mean?

    So when this icon shows up on an email in a shared mailbox that email when attempting to froward, tries to forward from the senders address.. any idea why this is?

  • Adobe Acrobat XI Form Help

    Hello experts, I need javascript to calculate the following: "Discount_Subtotal" + "Sales_Tax" + Shipping_Handling" - "Deposit_Received" = "Invoice_Total" Can anyone help me?