Process to Move Stock from Unrestricted to Restricted / Quality Stock

Dear All,
In one of my plant Quality Management Module is not implemented, but MM module is live and manually using Mov. Type: 321 stock is transferred from Quality to Unrestricted and vice-verse.
My requirement are as follows:
1) How can stock status be changed automatically from Unrestricted to Restricted / Quality once its re validity period reaches.
(For this Inspection Interval of 365 days has been maintained in QM view.)
2) Inspection Lot is not required.
3) How can QA07 & QA05 can help in this ?
Best wishes,
Vivek Kumar

Hi,
1) I am passing Material code, Plant, taking 'Initial run in days=1' and selecting 'Block Batch at Inspection Date',  I am getting msg 'No Entries Found' (In this case Inspection Type '09' was not active)
2) When I activate Insp. Type '09' the Inspection Lot is getting generated when i perform the above process but I dont required Insp. Lot.
Suggestion welcome.
Rgds,
Vivek

Similar Messages

  • Movement type from unrestricted to reserved

    Hi Friends,
    Is there a T-code for stock transferring from unrestricted to reserved?
    Here is the scenario, we have 100 pieces of material ABC under unrestricted , we'd like to reserve 50 pieces for a particular customer who will place the order two months later.
    Thanks for your help
    Linda

    it is not possible to create a reservation in MB21 transaction for movement 601.
    So you need  to find a workaround to "reserve" the material.
    one idea could be to create the sales order in advance with a certain delivery data (e.g. Dec.31) and use and change this one when the real order comes in.
    Another option could be to change the status to blocked, or move the stock into an extra storage bin.
    any workaround has follow on actions, as you would need to transfer the status again to unrestrcted if you want make use of this material.
    In any case, such reservations may lead to dead-stock if the expected sales order does not arrive.

  • Movement type from unrestricted use to particular storage location

    Hi ,
    I have situation wherein the stock was goods receipted with referendce to  a PO into unrestricted stock (without mentioning storage location).
    I now want to transfer this stock to a particular storage location.
    Please let me know how to do this,
    Regards,
    Vinayak

    Hi,
    How can you receive a material without mentioning the storage location in MIGO (101), it is not possible as per standard system.
    Please check the PO, It must be created with account assignment that means it was consumed at the time of GR, that is the reason you do not need to enter storage location at MIGO
    So if you need that material in storage location cancel that GR, change that PO receive again in desired Store

  • Moving a Lot back from unrestricted use to quality inspection

    Hi experts
    I made GR and qulaity inspection lot is created and I made a user decision ater released it and the stock is posted to unrestricted use.
    Due to manual error I need to cancel the material document and the invoice captured for that lot using MIGO t.code.
    So i went to MIGO Selected cancellation with material document, I have given doc number and pressed enter. It is not allowing me cancel the material doc instead it throughing an error "You cannot cancel GR, since inspection lot is already partly posted"
    How to proceed with this?  pls help
    regards
    K.R.Srinivasan

    Hello Srinivasan,
    if you have made the UD and completed the stock posting SAP recommends that you create a bseperate return delivery for the stock (Not nice, but standard).
    You could however try the following notes:
    [175842|https://websmp205.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=175842&_NLANG=E] describes how to reverse material documents created by the UD
    [33924|https://websmp205.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=33924&_NLANG=E] describes how to reverse the UD code
    Then you can try to make the UD and return the stock.
    Please note the exceptions in note 175842 concerning the reversal of stock postings.
    Regards,
    Isabelle

  • Transport Table K9RPEF1000006  from Production Server to Quality Server

    Dear Friends,
         I am performing client export/import activity and I have exported the Production Client with SAP Profile SAP_CUSX but when we checked log then It shows the table K9RPEF1000006 is available on production server but not available in quality server.So I have two queries ,( i) how can we create tranport request for this sap standard table (ii) How can we transport/move table from production client to quality client.
    Regards,
    Adya

    Hi Adya,
    You will need to create a transport manually using SE03 or SE09 ...
    R3TR TABL will transport technical settings for the table.
    R3TR TABU will transport table contents.
    Best regards,
    Derrick Hurley
    Development Workbench

  • Movement type to scrap the Restricted stock from warehouse

    Hi,
    Kindly advise the movement type to scrap the Restricted stock from warehouse.
    Thank you.

    hi
    what do u mean by restricted stock
    i thnk it is BLOCKED stock
    please clerify that
    u cant see any restricted stock in MMBe
    it is GR blocked stock and blocked stock or reserved stock
    hope it clears
    regards
    kunal

  • Move  stock from Sales order stock unrestricted stock

    HI ,
    I have material in sales order stock. I want to move it to unrestricted stock . How it should be done
    PLease reply .

    use transection code mb1b and  movement type 411 E .
    Regards,
    Dhaval

  • Stock Reversal - From Unrestricted to Quality

    Hi All,
    Our scenario is as follows,
    Inspection takes place for a Inward material (101). Once the UD is given stock is moved from Quality Inspection to Un restricted.
    Then the Raw Material is issued to Production. Some defects are observed at production Stage and they are returning it to Quality. How this can be done in SAP. I have tried to Transfer Posting (321 to 323), System says, as the Material is activated for QM Inspection, this is not possible.
    Pease guide me, how to move the Material back from Unrestricted to Quality Inspection.
    Regards
    Sam

    Hello,
    You can choose a line rejection process for this. Please activate 08 inspection type for the material.
    First pls do 344 movement type (MB1B)  and post the material from unrestricted to block.
    Then do 349 movement type for posting the material to quality from Block.
    Lot will get created and you can reject the material by giving the UD and posting it to return delivery.
    Please make sure that quality is active for 349 movement type in SPRO > Inspection for good movement.
    Please revert back for any more doubts.
    Regards
    gajesh

  • Revaluation in stock transfer to Sales Order stock from unrestricted

    User is trying to do a stock transfer posting from unrestricted to Sales order stock.  Now the system is throwing an error saying that account setting has not been done for UMB (OBYC setting).  I have given the GL for this UMB transaction type in OBYC>  UMB is for posting Gain/Loss from revaluation.
    I dont understand how a revauation happens when we transfer stock from unrestricted to Sales Order Stock ?  What is the purpose of that in our scenario, could you please explain.

    Hi:
            Normally it should not happen in case of stock transfer posting. Please check the movement type settings for valuation class of your material and see if the transaction type UMB has been set against valuation class in OMJJ...Account grouping.
    Hope it will help you.
    Regards

  • How to transfer special stock type ''O'' from unrestricted into blocked

    Hello!
    I would like to finD out if there is any movement type which would move sprecial stock ''O'' (provided for Vendor) from unrestricted to blocked? The stock should still belong to vendor afterthat.
    We want to move the quantity of some batches into ststus blocked as we do not want them to be used (bad quality) - the are physicaly at vendor. We move this unavailable materials from vendor to our plant every 2-3 months and would need to have accurate information about unrestricted stock.
    Many thanks in advance for your answer.

    Hi ,
    For the stock of material provided to vendors, the available stock types are unrestricted-use stock and stock in quality inspection. So you can NOT change the stock type to blocked.
    I suggest you create a special storage location for this purpose.
    Best regards,
    CM

  • Movement of material from Unrestricted to Quality at sub contractor

    Hi Expert,
    I am looking for a way to move stock from Unrestricted to Quality for stock that is stored at a vendor (sub contractor)?
    Have you got any advice?

    Hi Anders,
    Is your wish to move your goods from unrestricted special stock at SC vendor to QI special stock at SC vendor?
    In this case you may have solution, please check transaction MB1B + relevant movement type (sorrowfully I cannot check 'cause I have no access to SAP now). Please take care of choosing proper movement type with special stock category 'O'.
    http://help.sap.com/saphelp_46c/helpdata/en/4d/2b909643ad11d189410000e829fbbd/frameset.htm
    BR
    Csaba

  • Stock reversal : Unrestricted to restricted  for Production GR/Purchage GR

    We need help in fixing the client problemd on:
    1. Inspection lot uses decision for GR for production order is rejeted client want the rejected qty in unrestricted stock. No intital stcok update option or additional qty confirmation for production order is acceptable.
    2. Inspection lot uses decision for GR for purchase order is rejeted client want the rejected qty in unrestricted stock or if passes by mistake than have to take unrestricted stock to restricted stock.
    Any suitable solution any consultant has applied in above two cases.
    Thanks & regards
    Rajiv K. Pandey , PMP
    SAP SCM certified solution consultant

    I am able to solve this isues > Following are the steps .
    1. Apply the note correction ( SAP note No 175842)
    2. Create Z-Tr Code for reversal posting . This will create one simple screen for making entry for Inspection lot no.
    3. Configure the table T158 B for making additional entry for Tr Code QA11 ( Quality Uses decision) allowed for reversal movement type 322 block stock to restricted stock. or any other posted stock to reversal movement type for taking it to quality restricted strock.
    4. Run above Z -Tr for making it reversal in taking any stock to quality stock for all priviuos takeen uses decision.
    Hope it will help all the user who made some mistake in taking uses decision & want to take posted stock in quality stock.
    Rajiv Pandey , PMP
    SCM solution consultant.

  • Movement type for Unrestricted to Blocked stock

    Can anyone tell the movement type for moving material from unrestricted storage location to Blocked stock for scrapping purpose.??
    Also tell if any other way is also there...??
    regards
    Inder Pal

    Dear sasikanth
    If I am correct,
    321 is for transferring quality to unrestricted and
    322 is reversal of 321
    which means, unrestricted to quality.
    Correct me if I am wrong.
    Thanks
    G. Lakshmipathi

  • Automatic movement of goods from unrestricted to blocked on expiry date

    hi,
    Is it possible move stocks from unrestricted to blocked when it reaches expiry date.
    What is the use of dealine monitoring of batches by QA06, QA07, QA05
    sathish. R

    Hi ,
    You can use the Dead line Inspections :
    1. Here after the Expiry date is reached , the material can be moved back to quality stock ( New  lot is created )
    2. For that in Material Master , You have to  activate the bath managemnet,
    3. Self life interval also has to be maintained in Material Master.
    4. Once based on the self line intravel, when you recevive material at Migo stage the SLED date is given and Expiy date is calculated automatically by the system.
    5.By using the T-code QA 05 ,you can create the inspection lot which expired for particular batch.
    Needs any clarification, i will give to you

  • Reg. Block stock of material from Unrestricted

    Dear All
    Using TCode MB1B - Mvt 344 , I am trying to <b>block</b> stock of material  from Unrestricted. The below error occurs. Pleaes help.
    "Deficit of BA Unrestricted-use 1.225,000 KG : MODALYARN-N 1001 SC01 RED"
    I have stock in Unrestricted and also some quantity in Blocked.
    But I can't move.
    Thanks
    Rajkumar

    Hi,
    Are you using batch management please insert the batch
    Or check if any default batch is coming in MB1B transaction
    BR
    Diwakar

Maybe you are looking for

  • Tirgger not firing sometimes

    Hi, Here is the problem: Table A has 4 triggers and one of them is updating a field in table B. On all but one installation table B does not get updated all the time. (We have this code on different versions of Oracle on Solaris, Windows and Linux) F

  • Why is my final swf so slow/stuttering?

    Need help cause Im going out of my mind. I have created a webpage with some frame by frame animations and I've tried it in Flash at different simulated download speeds and it works perfect. But when uploaded to internet it runs like slowmotion in bot

  • Programmtically insert text into header of panelWindow?

    Hi Experts, Is it possible to replace the content of a panelWindow's header with anything other than another image? for example with html-formatted text? I'm creating a M$-Ribbon like widget and trying to use panelWindows as the backbone for the menu

  • Mac Notes won't connect to iCloud; system preferences crash despite fixes tried

    I am on 10.8.5, have not updated to Mavericks yet. My Mac for notes doesn't want to connect to iCloud so that my notes will sync between all devices. I have tried all of the solutions that seemed to work for others, like deleting cache, rebooting, ma

  • Planning Dependent Demand with Phantom Strategy (59)

    Hi We would like to maintain forecasts at a Phantom material level and consume this forecast based on dependent demand (Planning Strategy 59 in ECC and an equivalent custom strategy in APO). This works in ECC MRP, but does not appear to work in APO C