Process will not be created with zero standard prices in material master

Hi,
I have two type of material;
1. In process material say A1
2. Finished Goods say B1
Both materials price control are standard price. I do not run costing. So , after creation of material master , standerd price has to update through MR21 in the account1 tab before start production .
Suppose, if I forget to update standard price in material master and prepared process order, it will carry zero value of production cost.
Hence, I want to restrict the creation of process order with zero standard prices in the material master.
In order words, as long as standard price will not be updated after creation of the material master, user will not be allowed to create process order, if wrongly try, system will give message u201Cwith zero standard price creation of process order will not be allowedu201D.
Please let me know either standard configuration or name of User exit or Badi.
Regards,
Amit

Hi,
You need to use BADI: workorder_update.
Method: At release.
check MBEW-STPRS field in the code ..and flag error and reject error if STPRS = 0.
Regards,
Santosh Sarda

Similar Messages

Standard Price in material master and MBEW

Hi
We have unique problem. The currency was setup with out decimal places due to some valid reason. Due to which STANDARD PRICE in MATERIAL MASTER looks alright (lets say 1000) but in MBEW(field STPRS) it is 10.
I would like use value which is in Material master for calculations in ABAP program. How can i achieve this? Is there any function module for the same so that I can convert value in MBEW-STPRS to value in material master.
Thanks in advance.

Hi ,
Try to use the following FM's:
CONVERT_MATPR_TO_MBEW_MTPER
use the BAPI "BAPI_MATERIAL_GET_DETAIL" and take the price from the Export parameter MATERIALVALUATIONDATA. This parameter points to the structure BAPIMATDOBEW which has all the material price details like :
Price control indicator
Moving average price/periodic unit price
Standard price
Price Unit
Currency Key
ISO code currency
Hope this solves your problem.
Thanks,
Greetson

How to view previous standard price in material master?

Dear expert,
in material master Costing tab 2, i can view the current and future cost estimate price. but i want to view the previous month standard cost estimate price in material master?
For these, is there any configuration setting needed?
Thanks for advance

Hi
When you re-release a Std Cost - The Future cost would become the CURRENT cost and the Existing curent cost would become the PREVIOUS cost.... You can then see the Previous cost estimate in material master
br, Ajay M

Changing standard price in Material Master.

Hi Gurus,
Can anyone please tel me in material master Accounting1 view,is there any way to change the standard price field immediately,once its created?When I go in change mode the standard price field is disabled.
Thank you all in advance.
T6

Hi,
Use MR21 Tcode and change the moving average price if u have a stock means no problem bcaz in the OBYC T code Cost (price) differences- PRD u have to give the G/L account and that value goes to that account. System Does not allow to change the price in MM02 Transaction. U must do it in MR21 only.
Regards,
Venkatesh
MM consultant

Want to update Moving or Standard price from material master to ***.Value ?

Hai Experts,
As per Subcontract Logic, 1.1 % of the standard price should be update in J1ID Asseable value..
so I need to update Standard price value should be automatically update in Assesable value whenever it price changes..
Kindly guide me

Hi,
I think its not possible to shiftf from th MAp to J1Id assessable value.
Need to maintina in the field place of J1ID.
Regards,
Andra

Negativ Standard Price in Material Master Record

My customer (a cement producer) purchase a rohmaterial (bone) and get mony for it, so that the quantity on stock is positiv but the total-value negatic;
--> standard price negativ.
Do somebody have a solution???

Hi ,
Try to use the following FM's:
CONVERT_MATPR_TO_MBEW_MTPER
use the BAPI "BAPI_MATERIAL_GET_DETAIL" and take the price from the Export parameter MATERIALVALUATIONDATA. This parameter points to the structure BAPIMATDOBEW which has all the material price details like :
Price control indicator
Moving average price/periodic unit price
Standard price
Price Unit
Currency Key
ISO code currency
Hope this solves your problem.
Thanks,
Greetson

Standard price in Material master

Hello,
in the Table MBEW und Field STPRS ther is the actual standard preis.
We actualise (change) the preis every Friday. It means we have another price on saturday
How can I see the Preis from wednesday on saturday. It's there any table for change history where i can get the last price.
Thanks

HI,
try following
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/b3/7e6da267a4cd47bbba47d3536adeeb/content.htm]
Regards
Kailas Ugale

I use an iMac 10.6.8 with iPhoto '09 to download digital images from Canon DSLRs. Until the last two weeks there has been no trouble whatever importing images by a USB connection from either camera to the Mac. Now the process will not kick in. Any ideas?

I use an Mac OSX 10.6.8 with iPhoto 09 to download digital images from two Canon DSLRs. Until the last week, there has been no problem whatever in launching the import procedure once the USB connection has been connected and the camera switched on. Now the process will not kick in at all for either camera. I can't find a solution through iPhoto help or from other sources.
Any ideas to fix? (I admit I have not tested the USB cable at this time).

What does "kick in" mean?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Post back with the result.

The process could not be created because the maximum number of asynchronous responses (5) has already been reached, and it will be dropped.

Hi
he process could not be created because the maximum number of asynchronous responses (5) has already been reached, and it will be dropped.
Command executed: "C:\WINDOWS\system32\WindowsPowerShell\v1.0\powershell.exe" -command "&G:\SCOM\SCOMModule\Notification\SMS.ps1 -scomalertid:'{c5a013e7-5408-468a-9b04-febab33cc56d}' -alertname:'Common Primary Database TableSpace
Threshold Alert' -alertdesc:'TableSpace TEMP FreeSizePercent:0.4375\n' -alertstate:'Closed' -alerttime:'7/26/2014 1:55:19 PM' -Priority:'1' -Severity:'2'"
Working Directory: g:\SCOM\SCOMModule\Notification
One or more workflows were affected by this.
Workflow name: Subscription852fbf70_40eb_450c_874d_46b631ca1352
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group:******
Please help me
Thanks

Hi,
the RMS is "Root Management Server". When you install first management server it becomes RMS. The RMS is relevant in SCOM 2007x management group. You can identify which server is RMS in administration console under management server view. Look for instance
with "yes" value in "Is RMS" column.
If you have SCOM 2012x version management group create sugested registry entrys on all management servers (MS) which executes command channel.
This will surely solve your
problem.
Regards,
Ivan

Intercompany Deliveries were created with zero quantity, causing an idoc failure and the remaining delivery too

Intercompany Deliveries were created with zero quantity, causing an idoc failure and the remaining delivery too
a. User trying to create delivery but stock not available.
b. When stock is not there it should show an error message in SAP screen but its not - like stock not available etc
c. Fedex gets delivery notice for the delivery; if its more than zero it will create delivery otherwise less than zero it won’t accept.
d. But issue its creating even its less than zero
Is there anyone who can help me out...

When one is created with zero quantities it starts blocking our deliveries from getting through to fedex because deliveries will in doubt have been blocked at fedex. As we process our orders in morning and if there is an STO blocking orders, it will be in afternoon .
Any suggestions !!!

Often, Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted.

Hello,
Often, the Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted. This happens especially when many apps are running but even though there are plenty of memory resources available.
I have tried to find if something is using Firefox in the background, but have no way to know what that would be.
Their are no apparent viruses detected.
Firefox is version v5.0 and occurred in earlier release.
System is Windows 7 (64bit).

well, it's not the same hardware and it's a bit different.
I managed to pass that stage somehow but I still have a problem
I don't use the built-in creator tool that comes with Spyrus as it doesn't know how to append a pre-staged media that was created by SCCM that should apply the Windows file system to a second partition and the WinPE to the first partition.
I managed to do everything. my only problem is that the WTGCreator that comes with SCCM 2012 R2 creates the 350MB partition with FAT32 file system.
when I boot from the device I get the WinPE, I can choose a task sequence and then it fails when trying to apply the wim file. the error tells me that the 350MB partition is FAT32 which is not supported (even though it chooses the second partition, which
is all the rest of the disk space)
what I did was adding another task that converts the 32 Fat partition to an NTFS partition and then the process continues and finishes successfully! but that's a workaround.
I'm trying to make this process as smooth as possible without having additional steps
Tamir Levy

Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

If you think you're insane now, try maintaining those pop up menus.
As far as I know, these menus have not been updated since FW 8, so
they are at least two versions old.
Save yourself a lot of grief by avoiding those menus. There are many
other products on the market which do a much better job of creating
and maintaining this type of navigation structure.
Read this link before you climb any higher on this slippery slope:
http://apptools.com/rants/jsmenu.php
There was another blog post by the fellow who originally wrote the pop
up menu feature, but I can't seem to locate it. Even he says stay away
from them.
Not the answer you probably want, but I hope it helps, nonetheless.
Jim Babbage

[FlexPMD] flexpmd.html report created with zero bytes [Plz help]

hi folks,
initially i integrated FlexPMD with Maven.
when i tried to build it creates the following:
two folders:
* CSS --- contains css files
* Images --- contains image files
two files:
flexpmd.html -- created with zero bytes
pmd.xml -- it lists the violations.
my pom.xml
<plugin>
<groupId>com.adobe.ac</groupId>
<artifactId>flex-pmd-maven-plugin</artifactId>
<version>1.0.RC3</version>
<executions>
    <execution>
    <goals>
        <goal>check</goal>
    </goals>
    </execution>
</executions>
<configuration>
    <ruleSet>${basedir}/pmd-ruleset.xml</ruleSet>
    <outputDirectory>${basedir}/target/pmd</outputDirectory>
</configuration>
</plugin>
then i tried to integrate with Hudson, i configured this pmd.xml with hudson, its showing empty graph(see below)
could you tell me , why this flexpmd.html is generated with zero bytes and why i'm not able to see plotted graph
i tried the following version 1.0.RC4,1.0.RC5 and 1.1. but these versions also creating empty html report and some versions not running under hudson.
please provide the correct version and details to solve this issue.
please help in this issue, no help except this forum... i googled already did nt get any help.
correct me if i'm wrong.
thanks in advance.
Regards,
Mani

Hi,
What do you have in the console log?
Please, try with 1.1.
Xavier

Outbound created with zero value against STO PO

Hi experts,
I have created an outbound delivery (VL10D) against STO PO. OBD has been created with zero value. in PGI correct accounting entry is getting generated. However, material price is maintained in STO PO.
Please highlight the gaps, due to which amount in OBD is coming as zero. Subsequently, in billing document zero value is appearing.
regards

probably something wrong in your price schema if you want copy the price from the STO, or you just missed to maintain the price conditions if you use special intercompany prices.
For details see OSS Note 338922 - Analysis note for cross-company transactions (delivery)
look at point 6 in this note.

TS4118 Ever since I got the iphone 5 my phone/icloud calender and contacts will not remain synced with Outlook. I am constantly having to sign in and sign out and unlink and re link to Outlook.

Ever since I got the iphone 5 my phone/icloud calender and contacts will not remain synced with Outlook. I am constantly having to sign in and sign out and unlink and re link to Outlook. this creates multiple categories of contacts and calenders and I have no idea which is syncing with my phone, ipad, outlook. Help. thanks.

Sounds like the Outlook plugin isn't working properly. You could try a couple of things:
Go to Start>Control Panel>Add/Remove Programs, uninstall iCloud, the download and install the iCloud contol panel for Windows again from here: http://support.apple.com/kb/DL1455. Then sign back into your iCloud account and check your syncing settings again.
Uninstall iTunes and all of its components as by following this guide exactly: Windows XP or Windows Vista/7, then reinstall iTunes. You must follow this guide exactly or it will not be successful. (Uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.) This will replace the Outlook plugin.
Then try your calendar again and see if it will sync properly now.

Process will not be created with zero standard prices in material master

Similar Messages

Maybe you are looking for