Processchain errors in Production and how to solve those issues
Dear All,
Please share some process chain errors in production and how to solve those errors as well,
Please send me if any one have the list of errors and how you are solved those..
I am very new to BW,am also preparing my list of errors and solutions to fix them..Please share me if any one have ?
Thanks
Hi
Table of Contents
1. Time stamp error 2
2. PSA error records 4
3. SID not found for characteristic 7
4. Error calling number range object 8
5. Trfc error 10
6. ALE REMOTE lock 13
7. Delta fails 14
8. Deleting setup table 18
9. How to run statistical setup for different Application components 19
10. How to do selective deletion 22
11. Roll up 24
11. Compression or collapse 25
12. How to do Attribute change run 27
1.Time stamp error
Resolution procedure
Go to RSA1Source system
Run program RS_TRANSTRU_ACTIVATE_ALL
Mention source system and Info source and then execute.
Now the transfer structure will be automatically activated.
Then proceed with the reload, it will get success now.
2. PSA error records
Go to details tab, we will find its packet no. and its record no.
Resolution procedure
Click on PSA icon in monitor and select the error data packet
Double click on error record and edit it to the correct value,
select save.
Now update from PSA to target by selecting the option Start update immediately.
3. SID not found for characteristic
Resolution procedure
a. Remove the failed request from data target by making its QM status into red.
b. Load Master data for characteristic using full update.
c. Then reload the transactional data.
4. Error calling number range object
Resolution procedure
Note down the assigned dimension into the cube for 0VAL_TYPE
copy the dimension name
Go to RSRV transaction
Tests in Transaction RSRV -> All Elementary Tests ->Transactional Data then double click on Comparison of Number Range of a Dimension and Maximum DIMID- then click on the right pane in same->Mention the cube name and dimension name, click on enter.
Then click on correct error. It will correct the error.
5. Trfc error
Resolution procedure
Go to SM58
Go to edit->Execute LUW.
Then do refresh in monitor.
Now it will pick the records and the load will get success.
Some times we found that some packets will not get updated even if the extraction is showing as complete.
Do manual update of each packet
6. ALE REMOTE lock
Resolution procedure
This can happen when user or ALEREMOTE is accessing the same table
a. Remove failed request from data target by making its QM status into red.
b. Check into sm12 and delete the lock, usually the BASIS deletes them
c. Reload the package
7. Delta fails
Resolution procedure
R/3->BW
Data is coming from R/3 then make the request technical status red in monitor and remove the request from manage.
go to info package restart the load, then you will get a pop up saying that repeat of last delta click on request again.
Go back to manage and look for the delta type, it will show as Repeat of last delta.
BW->BW(Data mart)
Delta load failed from ODS to cube/any data mart.
Make its technical status as red
Go to manage and remove the failed request by making its QM status as red.
It is updating from ODS, so we have to remove the data mart status in ODS manage, before restarting delta
If you click on data mart status it will pop up a window
Click on delete icon, select YES and then ok.
Now refresh manage the data mart status will get deleted.
If you load now the failed delta will get success.
Similar Messages
-
Most common BW data load errors in production and how to solve them ..
Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shobahi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error -
What does the xantrex driver error 5 mean and how to solve it?
Dear Experts,
I downloaded a new XANTREX driver and used it to control our new XHR
150-7 power supply. I tried to use the GET STRAT.vi to control the
output of the power supply. The output could be controlled according to
the command input. However, there is always an ERROR 5 message poped
out whenever it ran. The error source seemed to be in the DELAY &
READ.vi.
I would be most grateful if you could tell me how solve this problem at your earliest convenience.
Thanks a lot for your attention and help,
JamesExactly which driver did you downlaod and from where? By "GET STRAT", do you mean one of the Getting Started VIs? Error 5 means "NI-488: Command requires GPIB Controller to be System Controller." Are you using GPIB to control the instrument? If so, what type of board are you using and which version of VISA and NI-488? If the error only occurs on a read, try issuing the query from MAX and see if the error occurs there. In a couple of the Xantrex drivers I looked at, there seemed to be some fixed delays after a write and before a read. You might try increasing those values to see if that makes any difference.
-
HT201210 what is error 409 and how to solve the error
i was trying to restore my iphone but it give an error 409
what does this mean and how to solve itWhy apple technical support will help the apple customer to solve this problem ??????????
the complication of apple products let most of my county's people use SAMSUNG phones -
What is the error code mean? And how to solve it ?Please give your answer. Thanks
What is the error code mean? And how to solve it ?Please give your answer. Thanks
Attachments:
QQ截图20140403134626.png 59 KBduplicate post
LabVIEW Champion . Do more with less code and in less time . -
What is the error code mean? Why is there an error?And how to solve it ?Please give your answer. Thanks!
——1110340026
Attachments:
QQ图片20140403140655.jpg 108 KBSannieboyyyy wrote:
Could be me, but your VI is not working properly on the english version of LV. Can I suggest you to try programming in English in the future?
Yes, it's you. The VI is working just fine, except for some cosmetic issues with the labeling. I don't think is is a valid suggestion to force somebody to program in a specific language, especially since LabVIEW supports all these languages.
Here are the problems with the VI:
If you don't want an amplitude of zero, you need to set the amplitude control to a nonzero value before running. Simple as that!. (You could also set the input range for the amplitude control to exclude zero or use a case structure to skip certain code if the amplitude is zero).
You could also wire the error output to an indicator so it simply displays the errors, but keeps running.
Your while loop is currently useless. You can delete it and the program function will not change. Use a stop button at the loop condition.
Your while loop needs some timing so it runs at a reasonable rate. Either add a small wait or configure the signal generation to "simulate acquisition timing" instead of "run as fast as possible".
LabVIEW Champion . Do more with less code and in less time . -
When I try to open up this program, Pacifist, I receive this error message. Here's a screenshot. http://i.imgur.com/v717w.jpg What does this error message mean and how do I solve it?
It sounds like some of the Unix Executable commands were removed (or the permissions to those were modified) out of the /usr/bin/ folder. You can try opening disk utility and repairing permissions on Macintosh HD or you can reboot your computer and holding down option-r when it comes back up to reinstall Lion again. This will not delete your personal information or applications you have installed but it would be best to back it up to Time Machine before you do. The article on how to do this is here. (http://www.apple.com/macosx/recovery/) I have had to do this before and it works like a charm. It should fix your issue but grab a cup of coffee because its going to take about 35 - 40 minutes depending on how fast your computer is.
-
My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not. The error message indicates an unknown error has occurred, with error code 6. Does anyone have any idea what the problem might be and how to solve it? Many thanks.
Hi
I followed this guy's instructions and it worked:
http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
Cheers for you help.
Andy
Message was edited by: bigbadandy -
When I signin Apple ID showing error 403 on my mobile. What is the reason? And how can solve it?
This often means that the maximum of 3 iCloud accounts have already been created on the phone and it cannot create another account. When this happens, all you can do is re-use one of the accounts previously created or creat your account using a different iOS device or Mac, if you have one.
-
Spotlight and search field in Outlook on MacBoon cannot find files as of a certain date. What can be the problem and how to solve?
Reinstall on both.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it isthree times faster than wireless.
Restore your iPhone to reinstall iOS. Be sure to do this while connected to your computer and iTunes.
Tap Settings > General > Reset > Erase all content and settings. -
** File Content Conversion Error in Receiver CC - How to solve this?
Hi friends,
My target structure looks like below.
EmployeeJobDetails --> Message Type
JobCode --> Node
EmployeeNumber xsd:string
Domain xsd:string
JobTrack --> Node
Department xsd: string
Position xsd: string
I use the FCC parameters in the receiver CC as below:
Recordset Structure: JobCode,JobTrack
JobCode.fieldSeparator = |
JobCode.endSeparator = 'nl'
JobTrack.fieldSeparator = |
JobTrack.endSepartor = 'nl'.
Because, we want the output like below
1099|Raja
Accts|JuniorAccountant
1100|Ram
HR|Recruiter
like this.
In this scenario Source is XML and target is txt file.
I am using XSLT Mapping. The FCC works fine, if my source input file contains some records. But, when we send empty source XML file as below
<?xml version="1.0" encoding="UTF-8"?>
<EMPLOYEE_DATA/>
Mapping works fine. Message is processed successfully in SXMB_MONI. The payload in response also comes with Message Type name like below
<EmployeeJobDetails namespace >
</EmployeeJobDetails>
While convert this, the system throws below error.
Error Message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)'
Friend, how to convert this when source XML is empty.
But, if we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the same empty XML file FCC is working fine and we get the target text file 0 KB. (Amazing !!)
But, in the first case, how to solve the issue?
Kind Regards,
Jegathees P.Hi friends,
If we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the <b>same empty XML file</b> FCC is working fine and<b> we get the target text file 0 KB</b>. (Amazing !!)
But, if we give parameters like JobCode,JobTrack then send pass the same empty file, we face the problem 'File Content Conversion' Error.
Searching solution for this problem ... -
My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?
Need Help Ye,
boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it still very slow? -
Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html -
hai when my iphone 5 connet to my windows 7 error massege is blink on my system the error code is oxe8000084 how to solve my problem
https://discussions.apple.com/message/22296149#22296149
more from the google I did
iphone error 21 -
When starting a rental movie, I get the message: "An error occured loading this content, please try again later". Any ideas how to solve this issue?
Firstly, I should have typed speedtest.net previously.
Now that's an interesting comment you make, out of interest do you have any purchased HD movies in your iTunes collection, if so, do they play on the Apple TV with your new tv.
Maybe you are looking for
-
Why can I not open my firefox, even though it's on my laptop. I double click on it, and it won't open, it worked fine this morning, but now it's not. I have had the trouble twice before. I have to uninstall it then download it again.
-
The applies to Vista (bootcamp) and attempting to connect an external display. To be clear, under OSX I seem to have no issues, so I was kinda hoping this was a known issue, as I don't expect this to be the place to do any extensive Vista troubleshoo
-
Profit center substitution in cross-company sales
Hi, We're working here with cross-company sales and profit center. Let assume that we have a final customer, sales organization (1090 and 1190) and plants (1090 and 1190). 1090 is selling to the final customer and 1190 will sell to 1090. Everything i
-
Buttons not working when I publish my HTML 5 project and play in LMS
When creating an HTML 5 project in Captivate 8, my project plays fine when i preview in web browser, but when i upload to my LMS the project won't autoplay and the buttons don't work. Has anyone else experienced this? Any ideas how to fix it?
-
I want to know the price of led of iphone 4
i want to know the price of led of iphone 4