Processing ALE Error in Foreground?
Hi All,
I am having problem with ALE doing my trial with PO-SO ALE.
I am creating a PO in one client(800) and it should create a SO in another client(810).
I am able to do the setup. Outbound Idoc generated successfully.
Inbound Idoc was successful to some extent, but it failed after call transaction.
The error message it is telling is "Please enter all the mandatory fields"
When i referred to Arvind Nagpal, for this error message, it is telling to process the idoc in foreground and get to the point where it stuck.
But i am not sure how to process an idoc in foreground. What is the transaction to process the idoc in foreground and how to process it in foreground?
Regards
Mitesh
Hi Mitesh,
There is a little trick to this.
You do this in transaction BD87. Run the transaction and enter the selection criteria to display the idoc. Put the cursor on the idoc in the display, right click and select: Restrict and Process.
You have another selection screen which allows you to further filter the idoc list. Put any further selection criteria you need to reduce the list to one idoc. The important step now, is to uncheck "Import in background". Hit execute.
A new screen appears with the specific idoc. Go to the menu: Edit->Proces->Foreground processing.
There it is.
Occasionally the Foreground processing will be greyed out. That means that foreground processing is not supported for that Idoc status.
Hope that helps.
Brad
Similar Messages
-
Processing overdue error during delta extraction from datasource 0CO_OM_CCA
Hi,
I'm getting "Processing overdue error" in BW while extracting delta from datasource 0CO_OM_CCA_9. all other extraction jobs from R3 -> BW are successful. Even Delta init on this datasource is successful & problem is only with delta package.
I appreciate if someone could provide information based on the following error details on this issue.
here are the extraction steps we followed.
Full load of fiscal years 2006 & 2007 Into transactional cube.
load budget data into transactional cube.
compression of the cube with "0 elimination"
Delta Initialization with fiscal period selections 1/2008 to 12/9999
all the above steps were successful.
and when delta package is scheduled, we are getting following errors.
BW system log
BW Monitoring job is turning red with following message.
Technical : Processing is overdue
Processing Step : Call to BW
Sending packages from OLTP to BW lead to errors
Diagnosis
No IDocs could be sent to the SAP BW using RFC.
System response
There are IDocs in the source system ALE outbox that did not arrive in
the ALE inbox of the SAP BW.
Further analysis:
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely
connected to the SAP BW. Check especially the authorizations of the
background user in the source system.
R3 Job Log
Even after BW job turns to red, R3 job continues to run for 2 hours and
eventually gets cancelled with an ABAP dump & here is the log.
Job
started
Step 001 started (program SBIE0001, variant &0000000110473, user ID
BWREMOTE) DATASOURCE = 0CO_OM_CCA_9
Current Values for Selected Profile Parameters
abap/heap_area_nondia.........2000000000 *
abap/heap_area_total..........2000000000 *
abap/heaplimit................20000000 *
zcsa/installed_languages......EDJIM13 *
zcsa/system_language..........E *
ztta/max_memreq_MB...........2047 *
ztta/roll_area................6500000 *
ztta/roll_extension...........2000000000 *
ABAP/4 processor: SYSTEM_CANCELED
Job cancelled
Thanks,
Hari Immadi
http://immadi.com
SEM BW AnalystHi Hari,
We were recently having similar problems with the delta for CCA_9. And activating index 4 on COEP resolved our issues.
Yes, by default there is a 2 hour safety interval for the CCA_9 DataSource. You could run this extractor hourly but at the time of extraction you will only be pulling postings through 2 hours prior to extraction time. This can be changed for testing purposes but SAP strongly discourages changing this interval in a production environment. SAP does provide an alternative described in OSS note 553561. You may check out this note to see if it would work for your scenario.
Regards,
Todd -
About ale error handling in workflow?
Hi,
can any one explian in detail ale error handling through workflow,its urgent for me.
Regards,
phaniHi Srikanth,
follw the steps it will helpful u,
Pre-requisites.
It is assumed that the reader of this article has some knowledge in SAP workflow BOR objects and ALE Idoc process like process code, Partner Profile etc.
Description
Here, we will be discussing in details the Error handling of an Inbound Idoc through triggering an event, which in turn will be triggering a workflow attached to the workflow.
Steps:-
1. Create custom BOR object with the events, Start and Stop event
2. Create a workflow for the error handling, like generating a notification whenever an error occurred in the Inbound Idoc.
3. Creation of Function Module and attachment with the Process Code
4. Create the settings for the Inbound Process of the Idoc through the Process Code.
Creation of BOR objects. Go to the[http://www.****************/Tutorials/ALE/ErrorHandling/page3.htm] transaction SWO1.
Enter a name for the Object type and click CREATE button for creating the custom BOR object.
Enter the details required for creating the BOR objects...
Create the Key fields and events of the BOR object.
For creating the Key fields place the cursor on the Key fields and Click on the Create Button
Create events for triggering the workflow and stopping the workflow.
For creating the event place the cursor on the EVENTS and Click the create button like Key fields.
Create two events.
Enter the event name description etc and proceed further to create it.
Similarly create another event for ending the Workflow in the similar manner like that created earlier.
Now, Generate the BOR object through the generate button
Release the EVENTS and subsequently release the BOR object.
After the creation of BOR object
Create a workflow for the generation of notification whenever an error is reached in the Inbound Idoc.
Execute the transaction SWDD.
Click on the CREATE button for creating the workflow for error handling.
Choose the Step type to be inserted for the notification like here we are using Send Mail option for sending a mail to the user whenever any error occurred.
Activate the Workflow and test it whether it is working as per the requirement.
After the successful completion it is required to attach the workflow with the event.
Go to the Header section (Denoted by CAP).
Go to the Start Events TAB.
Enter the details of the event with which the workflow should be linked like the category, BOR object type and the event with which that should be linked.
Enter here the BOR object that has been created and give the name of event created for starting the workflow.
Click on the Binding Button for generating the binding between the event and the workflow.
Click on the Binding Button for generating the binding between the event and the workflow.
Generate the binding and click OK button to save the binding.
Click on Activate / deactivate button for activating the linkage.
After the successful linkage the following sign will appear on the workflow.....
This shows that the workflow has been linked to the event and it will be triggered whenever that particular event will be triggered.
After the creation and successful linkage of workflow with the event it is required it is required to generate a function module and attached it to the process code.
Go to SE37 transaction and copy a standard process code function module to a custom one. Do no delete any parameters from the function module as the SAP standard program itself is calling this.
In that function module do the required validation and whenever the validation fails set a standard parameter WORKFLOW_RESULT to 9999 from within the function module, otherwise normally proceed to set the status to 53.
After the creation of function module it is required to attach it to the process code and corresponding attached to the message type at the Partner Profile stage.
The process code is being created through the transaction WE42
Go to the change mode and click the New Entries button for creating new process code.
Enter the Process Code Name, description and choose the processing type as Processing by function module. Click on the extension button of Identification.
The details for the of the Process Code after clicking the identification button will be
Whenever idoc arrives into the Destination system then the standard SAP triggers the Process code attached to the Message type in the partner profile. The partner profile is being maintained in the transaction WE20.
Since, it is and inbound scenario so the message type and the corresponding process code will be maintained for the Inbound Parameters.
Click on Create Inbound Parameters button for creating new Inbound Message type and the corresponding message type.
Enter the process code for the corresponding message type.
Click SAVE button for saving the changes.
Whenever the IDOC arrives into the target system, it checks the partner profile and finds the corresponding process code. The process code is being linked with the function module through which the IDOC is required to be processed.
Regards,
Phani. -
What are the varoius type of process chain errors how we can solve them.
Hi,
I need to work with process chains maintainace , Can any body tell me what are the different type of process chain errors generelly we used to get ,how we can solve them . IF possible please provide me any document also so that i can solve my
abnormal problems for process chain errors.
Thanks in advance .Hi,
1) Invalid characters while loading: When you are loading data then you may get some special characters like @#$%...e.t.c.then BW will throw an error like Invalid characters then you need to go through this RSKC transaction and enter all the Invalid chars and execute. It will store this data in RSALLOWEDCHAR table. Then reload the data. You won't get any error because now these are eligible chars done by RSKC.
2) IDOC Or TRFC Error: We can see the following error at u201CStatusu201D Screen:Sending packages from OLTP to BW lead to errorsDiagnosisNo IDocs could be sent to the SAP BW using RFC.System responseThere are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.Further analysis:Check the TRFC log.You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".Removing errors:If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.Action to be taken:If Source System connection is OK Reload the Data.
For more errors and solutions go thorugh the link below
http://indelasap.blogspot.com/2009/04/sap-bi-production-support-issues.html
Regards,
Marasa. -
I'm using the following code to retrieve order list is working fine but it give me an error Server was unable to process request ERROR: A server error has occurred when I trying to retrieve order total paid with same code: and the output when retrieve order total paid is [object Object]
var wsUrl = "https://mysite.worldsecuresystems.com/CatalystWebService/CatalystCRMWebservice.asmx?WSDL";
var RetrieveTotalPaidXML =
'<?xml version="1.0" encoding="utf-8"?>\
<soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" \
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope">\
<soap12:Body>\
<Order_RetrieveTotalPaid xmlns="http://tempuri.org/CatalystDeveloperService/CatalystCRMWebservice">\
<username>user</username>\
<password>pass</password>\
<siteid>111222</siteid>\
<orderId>112345</orderId>\
</Order_RetrieveTotalPaid>\
</soap12:Body>\
</soap12:Envelope>';
$.ajax({
type: "POST",
url: wsUrl,
Host: "mysite.worldsecuresystems.com",
contentType: "application/soap+xml; charset=utf-8",
data: RetrieveTotalPaidXML,
dataType: "xml",
success: processSuccess,
error: function(){alert("Error: Something went wrong");}
function processSuccess(ResData) {
var RetrieveTotalPaidParse = $.parseXML(ResData);
var $xmlRetrieveTotalPaidParse = $(RetrieveTotalPaidParse);
var $Order_RetrieveTotalPaidResult = $xmlRetrieveTotalPaidParse.find('Order_RetrieveTotalPaidResult');
$Order_RetrieveTotalPaidResult = $(this).find('Order_RetrieveTotalPaidResult').text();
$('#RetrieveTotalPaidResult').text(Order_RetrieveTotalPaidResult);
I think there a bug in BC CRM Web Service when trying to make a request for Order_RetrieveTotalPaid using soap need to be fixPerhaps it would be good to update the sample request as shown on the Developer reference page for this method (and, actually ALL of the SOAP samples)
The sample shows siteid (all lower case) -
Process Chain Error while activating DSO
Hello.
1st, let me say that I'm pretty new to BI so I apologize for the stupid question :-S
I have a process chain (Warehouse Mangement) that failed this morning at the DSO data activation step. It's simply because some entries have lowercase value in a field that should not. I know how easy this is to fix in the transformation but my problem is more on how to fix the actual fail of the process chain. Can I edit the "non-activated" data in the DSO (only 2-3 records that I need to put in uppercase) and "repair" my process chain or should I proceed another way?
Thanks for your help.Hi John.
If guess your Process Chain process ended in "Red color". Once you fix the error you can try to make "right-click" on the process with error and select "Repair". If this operation is "supported" by the activation process you won't have error.
But I really believe that you'll have to erase the request and launch the complete process (o set of related processes) once again. It's possible that the data you want its already in the NEW-DATA table of your ODS.
This tables is the following. /BIC/A<your ods tech-name>40
Hope it helps
gdmon.- -
while installing adobe creative cloud , getting the following error msg " There seems to be a problem with the download process. Error code:201"
Creative Cloud Help / Error downloading Creative Cloud applications
http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html -
[0C00:0A0C][2015-02-10T11:49:06]i001: Burn v3.7.1224.0, Windows v5.1 (Build 2600: Service Pack 3), path: C:\Documents and Settings\K4MLD.K4MLD-F2F3858A4\My Documents\Downloads\Message+.exe, cmdline: ''
[0C00:0A0C][2015-02-10T11:49:06]i000: Setting string variable 'WixBundleLog' to value 'C:\DOCUME~1\K4MLD~1.K4M\LOCALS~1\Temp\Message+_20150210114906.log'
[0C00:0A0C][2015-02-10T11:49:06]i000: Setting string variable 'WixBundleOriginalSource' to value 'C:\Documents and Settings\K4MLD.K4MLD-F2F3858A4\My Documents\Downloads\Message+.exe'
[0C00:0A0C][2015-02-10T11:49:06]i000: Setting string variable 'WixBundleName' to value 'Message+'
[0C00:0A0C][2015-02-10T11:49:07]i100: Detect begin, 3 packages
[0C00:0A0C][2015-02-10T11:49:07]i000: Registry key not found. Key = 'SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full'
[0C00:0A0C][2015-02-10T11:49:07]i000: Trying per-machine extended info for property 'State' for product: {F0C3E5D1-1ADE-321E-8167-68EF0DE699A5}
[0C00:0A0C][2015-02-10T11:49:07]i000: Setting numeric variable 'VCRedistx86' to value 5
[0C00:0A0C][2015-02-10T11:49:07]w120: Detected partially cached package: vcredist_x86.exe, invalid payload: vcredist_x86.exe, reason: 0x80070570
[0C00:0A0C][2015-02-10T11:49:07]i052: Condition 'VCRedistx86<>2' evaluates to true.
[0C00:0A0C][2015-02-10T11:49:07]w120: Detected partially cached package: NetFx45Web, invalid payload: NetFx45Web, reason: 0x80070570
[0C00:0A0C][2015-02-10T11:49:07]i052: Condition 'NETFRAMEWORK45 >= 378389' evaluates to false.
[0C00:0A0C][2015-02-10T11:49:07]i101: Detected package: vcredist_x86.exe, state: Present, cached: Partial
[0C00:0A0C][2015-02-10T11:49:07]i101: Detected package: NetFx45Web, state: Absent, cached: Partial
[0C00:0A0C][2015-02-10T11:49:07]i101: Detected package: VMAApplication, state: Absent, cached: Complete
[0C00:0A0C][2015-02-10T11:49:07]i199: Detect complete, result: 0x0
[0C00:0A0C][2015-02-10T11:49:11]i200: Plan begin, 3 packages, action: Install
[0C00:0A0C][2015-02-10T11:49:11]i052: Condition 'VCRedistx86=2' evaluates to false.
[0C00:0A0C][2015-02-10T11:49:11]w321: Skipping dependency registration on package with no dependency providers: vcredist_x86.exe
[0C00:0A0C][2015-02-10T11:49:11]w321: Skipping dependency registration on package with no dependency providers: NetFx45Web
[0C00:0A0C][2015-02-10T11:49:11]i000: Setting string variable 'NetFx45FullWebLog' to value 'C:\DOCUME~1\K4MLD~1.K4M\LOCALS~1\Temp\Message+_20150210114906_0_NetFx45Web.log'
[0C00:0A0C][2015-02-10T11:49:11]i000: Setting string variable 'WixBundleRollbackLog_VMAApplication' to value 'C:\DOCUME~1\K4MLD~1.K4M\LOCALS~1\Temp\Message+_20150210114906_1_VMAApplication_rollback.log'
[0C00:0A0C][2015-02-10T11:49:11]i000: Setting string variable 'WixBundleLog_VMAApplication' to value 'C:\DOCUME~1\K4MLD~1.K4M\LOCALS~1\Temp\Message+_20150210114906_1_VMAApplication.log'
[0C00:0A0C][2015-02-10T11:49:11]i201: Planned package: vcredist_x86.exe, state: Present, default requested: Absent, ba requested: Absent, execute: None, rollback: None, cache: No, uncache: No, dependency: None
[0C00:0A0C][2015-02-10T11:49:11]i201: Planned package: NetFx45Web, state: Absent, default requested: Present, ba requested: Present, execute: Install, rollback: None, cache: Yes, uncache: No, dependency: None
[0C00:0A0C][2015-02-10T11:49:11]i201: Planned package: VMAApplication, state: Absent, default requested: Present, ba requested: Present, execute: Install, rollback: Uninstall, cache: No, uncache: No, dependency: Register
[0C00:0A0C][2015-02-10T11:49:11]i299: Plan complete, result: 0x0
[0C00:0A0C][2015-02-10T11:49:11]i300: Apply begin
[0CEC:0C1C][2015-02-10T11:49:16]i360: Creating a system restore point.
[0CEC:0C1C][2015-02-10T11:49:32]i361: Created a system restore point.
[0CEC:0C1C][2015-02-10T11:49:33]i000: Caching bundle from: 'C:\DOCUME~1\K4MLD~1.K4M\LOCALS~1\Temp\{1ca30da3-9557-44ec-bdf2-e0887854efd9}\.be\Message+.exe' to: 'C:\Documents and Settings\All Users.WINDOWS\Application Data\Package Cache\{1ca30da3-9557-44ec-bdf2-e0887854efd9}\Message+.exe'
[0CEC:0C1C][2015-02-10T11:49:33]i320: Registering bundle dependency provider: {1ca30da3-9557-44ec-bdf2-e0887854efd9}, version: 1.0.14.0
[0C00:0484][2015-02-10T11:49:33]w343: Prompt for source of package: NetFx45Web, payload: NetFx45Web, path: C:\Documents and Settings\K4MLD.K4MLD-F2F3858A4\My Documents\Downloads\redist\dotNetFx45_Full_setup.exe
[0C00:0484][2015-02-10T11:49:33]i338: Acquiring package: NetFx45Web, payload: NetFx45Web, download from: http://go.microsoft.com/fwlink/?LinkId=225704
[0CEC:094C][2015-02-10T11:49:45]i305: Verified acquired payload: NetFx45Web at path: C:\Documents and Settings\All Users.WINDOWS\Application Data\Package Cache\.unverified\NetFx45Web, moving to: C:\Documents and Settings\All Users.WINDOWS\Application Data\Package Cache\F6BA6F03C65C3996A258F58324A917463B2D6FF4\redist\dotNetFx45_Full_setup.exe.
[0CEC:094C][2015-02-10T11:49:48]i304: Verified existing payload: VMAApplication at path: C:\Documents and Settings\All Users.WINDOWS\Application Data\Package Cache\{70A85191-F402-4CB5-8AFF-050956C7A9E1}v1.0.14.0\Message+.msi.
[0CEC:0C1C][2015-02-10T11:49:48]i301: Applying execute package: NetFx45Web, action: Install, path: C:\Documents and Settings\All Users.WINDOWS\Application Data\Package Cache\F6BA6F03C65C3996A258F58324A917463B2D6FF4\redist\dotNetFx45_Full_setup.exe, arguments: '"C:\Documents and Settings\All Users.WINDOWS\Application Data\Package Cache\F6BA6F03C65C3996A258F58324A917463B2D6FF4\redist\dotNetFx45_Full_setup.exe" /q /norestart /ChainingPackage "Message+" /log C:\DOCUME~1\K4MLD~1.K4M\LOCALS~1\Temp\Message+_20150210114906_0_NetFx45Web.log.html'
[0CEC:0C1C][2015-02-10T11:50:36]e000: Error 0x800713ec: Process returned error: 0x13ec
[0CEC:0C1C][2015-02-10T11:50:36]e000: Error 0x800713ec: Failed to execute EXE package.
[0C00:0A0C][2015-02-10T11:50:36]e000: Error 0x800713ec: Failed to configure per-machine EXE package.
[0C00:0A0C][2015-02-10T11:50:36]i319: Applied execute package: NetFx45Web, result: 0x800713ec, restart: None
[0C00:0A0C][2015-02-10T11:50:36]e000: Error 0x800713ec: Failed to execute EXE package.
[0CEC:0C1C][2015-02-10T11:50:36]i351: Removing cached package: NetFx45Web, from path: C:\Documents and Settings\All Users.WINDOWS\Application Data\Package Cache\F6BA6F03C65C3996A258F58324A917463B2D6FF4\
[0CEC:0C1C][2015-02-10T11:50:36]i330: Removed bundle dependency provider: {1ca30da3-9557-44ec-bdf2-e0887854efd9}
[0CEC:0C1C][2015-02-10T11:50:36]i352: Removing cached bundle: {1ca30da3-9557-44ec-bdf2-e0887854efd9}, from path: C:\Documents and Settings\All Users.WINDOWS\Application Data\Package Cache\{1ca30da3-9557-44ec-bdf2-e0887854efd9}\
[0C00:0A0C][2015-02-10T11:50:37]i399: Apply complete, result: 0x800713ec, restart: None, ba requested restart: NoTry deleting the downloaded ,exe file and re-downloading and re-installing it. If you have an AV running, try disabling it just for the installation; it may be preventing some parts from installing properly.
If that isn't what you need, please ask your specific question; posting the error log may help a tech, but is not very useful to us regular customers. -
hello,
following with my tread [ICR: Define Reconciliation Process Detail Attributes|Intercompany reconciliation - help with customizing] I have already make trx FBICS3 - Select Documents store 2 documents at table FBICRC003T, looks good. But unfortunately when I run trx FBICA3 - Assign Documents Automatically or FBICR3 - Reconcile Documents Manually the system shows the following error message:
Reconciliation Process 003: Error in setup of reconciliation display
Message no. FB_ICRC110
Diagnosis
Your customizing for the reconciliation display is invalid.
when I go to customizing "Set Up Reconciliation Display" the system shows a "Run time error"
Runtime Errors SYNTAX_ERROR
Date and Time 19.09.2008 20:20:30
Short text
Syntax error in program "SAPLFB_RC_UI_VIEWS ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSVIM" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLFB_RC_UI_VIEWS " in include
"LFB_RC_UI_VIEWSF00 " in
line 1308:
"The data object "V_FBRC0070C" does not have a component called "AUTO"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP* "
Error in the ABAP Application Program
The current ABAP program "SAPLSVIM" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
The following syntax error was found in the program SAPLFB_RC_UI_VIEWS :
"The data object "V_FBRC0070C" does not have a component called "AUTO"."
Trigger Location of Runtime Error
Program SAPLSVIM
Include LSVIMU04
Row 92
Module type (FUNCTION)
Module Name VIEW_MAINTENANCE_LOW_LEVEL
Does any body knows what is happening? Should I implement a SAP Note?
Thanks in advanceHello Rafael,
Apparently you did not generate the customizing using FBICC. If you have not invested much effort in customizing settings I suggest that you implement note 1172591 and generate the customizing via transaction FBICC. After you run this and make sure that the transaction data tables are activated the programs should run (provided the customizing for the companies in FBIC032 is correct). Please go through the generated customizing settings and make sure that everything looks OK...
I also recommend implenting note 1161993. Whether you run FBICC or not it will help when going through the customizing settings. The most likely cause for the error messages is that there are some incorrect settings in your field catalog and due to this also in the display hierarchy setup.
I hope this helps you in your efforts,
Ralph -
Step by Step documents for Process Chain Error Handling with Screen Shots
Hi
Is anybody having Step By Step Documents for Process Chain Error Handling with Screen Shots ?. Please forward it to me to my e-mail [email protected] . I will reward points to u immediately.
bye
Aamira KhanHi,
You can find lots of topic related to process chain issues in SDN.Please make a search in SDN.
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_library&query=process+chain&adv=true&sdn_author_name=&sdn_updated_on_comparator=ge&sdn_updated_on=&sortby=cm_rnd_rankvalue
Regards. -
Soap fault: SOAP processing failure, error id = 1018
Hello,
if I try to call a web service exposed via XI, i have this error message:
soap fault: SOAP processing failure, error id = 1018
Can someone help me to solve this problem?
Thank youThe following OSS note talks of 1018 error, see if it helps.
[946658|https://service.sap.com/sap/support/notes/946658] -
SSIS execute process task error on unziping
Hi
I am using 7zip to unzip files in SSIS using execute process task. Here is the configuration of the task:
executable: C:\Program Files\7-Zip\7z.exe
arguments: e default-o\\servername\livechat\unzip\
However, on executing package in BIDS, following error is thrown
[Execute Process Task] Error: In Executing "C:\Program Files\7-Zip\7z.exe" "e \\servername\livechat\7566_20121009.zip-o\\servername\livechat\unzip\" at "", The process exit code was "2" while the expected was "0".
Can someone help where I made mistake?
Thanks,
hsbalI have mapped the share to F: and then tested. Unfortunately that doesnt work as well.
I am getting the following error:
[Execute Process Task] Error: In Executing "C:\Program Files\7-Zip\7z.exe" " F:\*.zip -o F:\unzip" at "", The process exit code was "7" while the expected was "0".
Thanks,
hsbal
Seems like a syntax error. Go through this
http://www.dotnetperls.com/7-zip-examples
Rajkumar -
Ssis execute process task error: process exit code was 1 while the expected was 0
Hi Sir,
in my SSIS Package(2012) i am using Execute Process Task which will call bat file. bat file is located on UNC Path.i am having the below script in the batch file.
del \\servername\foldername\name.txt
rcmd \\servername D:\name1.bat
del \\servername\foldername\name2.txt
xcopy \\servername\foldername\file.txt \\server\foldername\outfilefolder
i am getting the below error message:
ssis execute process task error: process exit code was 1 while the expected was 0
i want know at what cases error exit code was 1?
Thanks for your time.Hi prasad.alm,
The error is generic and can be caused by various factors. Here are some suggestions for your reference:
Manually run the executable to execute the batch file so that we can check whether the command lines in the batch file are correct or not.
Check there are no duplicate/existing files in the destination folder.
Try to run the package in 32-bit or 64-bit runtime mode.
If the issue occurs when running a job, try to create a CmdExec type job step to call the excutable. If this job also fails, it might be an issue between executable and SQL Server Agent rather than the SSIS package itself.
If the issue persists, enable logging for the package, and check if we can obtain more detailed error message for further analysis.
Regards,
Mike Yin
TechNet Community Support -
Hi Sir,
I have develop the SSIS Package in 2012 version and i am calling the SSIS Package using Stored Procedure according to my requirement and that stored procedure will be using in my SSRS report Datasource.
once after the SSIS Pacakge has design and develop and deploy into the server as Project Deployment model..when i run the ssis Package ,calling through the SP it is working fine...
even when i design a SSRS report using SSDT(sql server data tools), in the SSRS reprot calling the above SP in Dataset.when i execute the SSRS report it is wroking fine...
once SSRS report has been deployed into the remote Server.. when i Execute the SSRS report i am getting the below Error message:
SSIS-Execute Process task Error _File/Process "\\Servername\Foldername\batfile.bat" is not in path
belo is the SP for calling the SSIS package.
DECLARE @EXECUTION_ID BIGINT,
@PKG_RESULT INT
EXEC [SSISDB].[CATALOG].[CREATE_EXECUTION] @PACKAGE_NAME=N'abc.DTSX',
@EXECUTION_ID=@EXECUTION_ID
OUTPUT,
@FOLDER_NAME=N'aa',
@PROJECT_NAME=N'xxx',
@USE32BITRUNTIME=FALSE,
@REFERENCE_ID=29 --unique identifier for environment
EXEC [SSISDB].[CATALOG].[START_EXECUTION] @EXECUTION_IDWhere the BAT part is ?
It looks like a security issue.
The account running has no permission apparently over "\\Servername\Foldername\batfile.bat"
Arthur My Blog -
Hello,
I cannot download an application from Apple store. A message appeares "your request cannot be processed. Error code 1009 "hi
i have a messege ( your request cannot be processed error code 1009) my iphone is 4s with ios 7.0.4 .
so cannot download in itunes
if i creat a new apple id problem is solved
thanks
Maybe you are looking for
-
While executing a jar file I am getting an error
while exec a jar file i am getting an error invalid file (bad magic number): Exec format error i tried to execute it with the commnad java -jar test.jar or by directly too ./test.jar
-
Remove custom label in maveriks contacts
I did some custom labels on iPhone. And now I cannot delete them, not on iphone (ios 7), not on macbook (mavericks) and even iCloud web interface could not help me.
-
How do I get rid of a dialog box that keeps coming back even though I press Cancel?
How do I get rid of a dialog box that keeps coming back even though I press Cancel?
-
Tried to load ios6 through itunes and it failed
docked and backed up iphone 4s to windows 7 pc running 10.7 itunes selected install update in itunes It ended with an unkown error dialog box that said you must restore your iphone to connect it to itunes the restore fails with an unknown error and n
-
About login authentication in ADF Security
I have applied ADF Security in application which I learned from the Cue Cards example and I did it successfully but I wanted to change the login page. So I created a PopUp which I learned from "Oracle JDeveloper 11g Handbook A Guide to Oracle Fusion