Processing Invoices for Service Entries Via a 3rd Party System

Hi all
We are using a 3rd party business collab site to allow vendors to accept purchase orders, process their own service entries and upon reciept of a service entry reponse, they will be able to invoice via this 3rd party website.
The problem the technical team (XI/PI) team is having is that the when the invoice comes in, using stand idocs and function modules, SAP processes the Invoice using MIR6. The problem we get here it that it sees the Service entry as a GRV and the level of the information is no longer at a lower level and come up to a PO line item level. Is this cause I am using GRV base invoice verification. But based on this, if a service entry has multiple services, it only processes the last one, and looks at the others as duplicates as they all reference the same PO and Line Item.
Have any of you come across such a senario and what did you do?
What would be the impact if I did not do goods reciept based invoice verification. Could that cause additional problems elsewhere in the system?
PLEASE HELP
Thanks
Vinesh

Hi Chandra
Its always preferred to use Business service for communication with systems outside the landscape. As it does not refer to any SLD components and safe to use on internet etc.
What is the use of using a 3rd Business system instead of using business service in my current situation?
If you want to use 3rd party system you need to define party based communication and it acts as a party in production environment. You can also create a Standalone sytem in SLD for your use. Standalone technical system mostly refers to standalone Java applications in landscape.
n both the cases, i can use a file sender CC and pickup the file from a folder using FTP protocol.
What is the criteria based on which i need to take this decision?
If your communication is party based and the 3rd party you refer is a party for ERP then it make sense to use a third party communication and use party name as well.By this i mean business wise. Else its always good to use Business service.
And finally, how are the system name & host name details, which we given during 3rd party technical system definition in SLD useful?
To use this third party system you need to register products on TS else you will not be able to see any Interface etc while configuring in ID. you need to add all details to it in SLD.
Thanks
Gaurav

Similar Messages

Post Invoice for Service Entry with many Service line item-MM-LIV

Dear All,
I have a problem to post Invoice for Service Entry with many Service line item. The problem is as follow:
I have created 1 Service Entry which has 5 Service line item in it. Three of the service line item are subject to Value Added Tax (VAT), the others aren't. Then, i wanted to post Invoice for the Service Entry, however, it just display 1 item which amount in total. How can i segregate each service line item in Service Entry thus i can post Invoice for all Service line item with subject to VAT and all service item with not subject to VAT, if just 1 Service Entry created for it ?
Please help me.
Thank You

Hi Ganda,
If you mark the 'service based invoice verification' checkbox in your PO item, your service items will be in your invoice as seperate invoice lines. Then you can modify the taxcodes on service item level.
Kind regards, Dick Hendriks.

MIRO invoice verification for Service entry sheet

When trying to do invoice verification for Service entry sheet i am getting this below error pls guide me
Delivery note/service entry sheet 5000000150 does not exist
Message no. M8183

Hi,
You may be saves SES number and now SES is not released!
1st Just cross check PO history TAB of service PO(ME23N), did you have only service entry sheet number or you have service entry sheet number and material document( will be created after releasing SES) with 101 movement type.
You have created service entry sheet (SES) in ML81N and got SES number, so as to recognize the vendor performed service. Next step, you need to accept service by releasing SES( in ML81N by clicking green flag or if release strategy there for SES, you need to release SES in ML85) so that FI document will be created.
Once SES released, then you can do MIRO w.r.t SES only.
Check doc:
http://help.sap.com/bp_bl604/BBLibrary/Documentation/209_BPP_EN_FI.doc
Regards,
Biju K

Service entry sheet:No provision for service entry for purchase order

Hi.I create a Purchase order with one item.The Item category was D(Service).Also lines of Service number was input in the Service tab of the item detail.After save the Purchase order,I goto t-code ML81N to Maintain the Service entry sheet.When I input the Purchase order number and item number and press enter,the SAP raise an error message box with following text:
No provision for service entry for purchase order 4500000149 00010
Message no. SE198
Diagnosis
The "GR =NO" (no goods receipts) indicator has been set in the PO item. It is thus not possible to enter services against this purchase order.
I don't know why and how to resolve this problem.So I need the experts to give me some advice.Thank you so much.
Regards
Yoda

pls check in ur PO at item details in delivery tab whether goods receipt checkbox is unticked.if yes then tick it and then process.
regards,
indranil

INVOICE FOR SERVICES

hi sap guru's
i need to invoice for services not for materials
in F-43 i am try to enter invoice getting materials only
how to get serces in invoice is there any tcode is there.
pls give me solution for the above.
raju
[email protected]

HI ,
Generally FI Invoice will be created in F-43.
If it relates to Materail , it will be through P.o, migo& miro.
If its service use F-43 OR
Come through service entry sheet.
service master
p.o
service entry sheet
invoice verification
chandra

Best Practices for Service Entry Sheet Approval

Hi All
Just like to get some opinion on best practices for external service management - particularly approval process for Service Entry Sheet.
We have a 2 step approval process using workflow:
1 Entry Sheet Created (blocked)
2. Workflow to requisition creator to verify/unblock the Entry Sheet
3. Workflow to Cost Object owner to approve the Entry Sheet.
For high volume users (e.g. capital projects) this is cumbersome process - we looking to streamline but still maintain control.
What do other leaders do in this area? To me mass release seems to lack control, but perhaps by using a good release strategy we could provide a middle ground?
Any ideas or experiences would be greatly appreciated.
thanks
AC.

Hi,
You can have purchasing group (OME4) as department and link cost center to department (KS02). Use user exit for service entry sheet release and can have two characteristics for service entry sheet release, one is for value (CESSR- LWERT) and another one for department (CESSR-USRC1) .Have one release class for service entry sheet release & then add value characteristics (CESSR- LWERT) and department characteristics (CESSR-USRC1). Now you can design release strategies for service entry sheet based on department & value, so that SES will created and then will be released by users with release code based on department & value assigned to him/her.
Regards,
Biju K

Work Flow for Service Entry Sheet

Hi all,
We need Work Flow for Service Entry Sheet as below using SAP mail box :
Once Created, will go to Incharge for varification.
If yes, will go to Manager for further varification.
If yes, will go to again Incharge back for Release.
Regards,
Hamadeh Bashir
Gulf Petrochemical Industries Company,
Bahrain

Hi,
Object Type BUS2080 (Service Notification)
Standard Task TS00008336 (Processing a Service Notification)
Workflow Template WS00200099 (Putting a Service Notification in Process)
You can define your own workflow.
Regards,
Srilatha.

PLN PCK No in BAPI for service entry

Hi,
I am creating service entries via BAPI_ENTRYSHEET_CREATE for planned services.
If I am using one PO line item then I am able to create service entries with proper PLN_PCK number and all.
But if I use mutliple line items in PO(not sublines) then PLN PCK number are not correct and I am getting message 'buffer table not upto date' in the service entry.
Anybody who has done this please help me.
Thanks.
Edited by: PS on May 24, 2010 11:38 PM

hi,
have you used the commit function too in se37, then only the values get updated.
se37- bapi_entrysheet_create
select header-- function module---> test sequence.
here you enter the two function modules -Bapi_entrysheet_create,bapi_transaction_commit.
do the same procedure as followed by you before in addition to this.
REgards,
velu

Creating invoice for Service PO - IDOC (INVOICE01) issue

Hello Friends,
We are facing a problem with creating invoice for service PO through IDOC (INVOICE01) from supplier portal.
Example: A service PO having one Line item and different service line items, I can successfully create Service entry sheet. Also I can change the tax code for service line items and can successfully create Service entry sheet.
When trying to create Invoice for that PO at 1st time (after creating Service entry sheet) through INVOCE01 (IDOC), It is end up with idoc error (Msg no FF812: Tax code XX also exists)
But the funny thing is , when trying to create Invoice for the same PO at 2nd time it is posting successfully.
Did any one face this problem?
Kindly let me know if there is any solution for this issue.
Thanks.
Regards,
Magesh Basavaraj.

Message closed

MM - ML81N, Release Procedure for service entry sheet

Hi Gurus,
I would like to active the realease strategy for service.
in order to customize I set:
-Relase Groups
-Release Codes
-Release indicator
-Release startegues
Then I run ML81N TRX and I called a sheet to try. This sheet had to has done to one of the release strategy set...
on the menu (of this trx ML81N)Entry Sheet->Set Status->Release (is still turn off)
Where is the problem?, anybody could help me?
Tks in advance,
Nacho

Hi,
please read the FAQ note 672719, question 5:
Setting up a release procedure is explained in the following short
example: All service entry sheets with material group 007 are supposed
to be subject to a release strategy. This release strategy requires that
the service entry sheets must be released with release code A1. Only the
cost center manager has the authorization for release code A1.
A) Create a characteristic for the material group:
o Call Transaction CT04. (Path in the SAP menu in R/3 Enterprise:
       Cross-Application Components -> Classification System -> Master
       Data -> Characteristics)
o Specify a name for the characteristic, for example CESSR_MATKL,
       and choose the 'Create' pushbutton.
o On the 'Basic data' tab page, enter a description and keep the
       'Released' status.
o On the 'Addnl data' tab page, enter table name CESSR and field
       name MATKL (Material group).
o Enter class type 032 (Release strategy) on the 'Restrictions' tab
       page and then save the characteristic.
Note: The release strategy must be based on a field of structure CESSR.
Using Transaction SE11, you can display which other fields are available
in addition to the material group (field MATKL).
B) Create a class to which you assign the characteristic:
o Call Transaction CL02. (Path in the SAP menu in R/3 Enterprise:
       Cross-Application Components -> Classification System -> Master
       Data -> Classes)
o Enter a class name, for example FRG_ESSR, and class type 032 (for
       release strategy) and then choose the 'Create' pushbutton.
o On the 'Basic data' tab page, enter any name. (Keep the
       'Released' status.)
o Enter characteristic CESSR_MATKL on the 'Char.' tab page and then
       save the class.
C) Now carry out the required Customizing settings. Follow IMG path
(Transaction SPRO) 'Materials Management -> External Services Management
Seite 4
-> Define Release Procedures for Service Entry Sheet'
o At first, you must create a release group (for example 03). For
       that, choose 'Release Groups', then choose 'New Entries', enter
       'Rel. Group' = 03 and 'Class' = FRG_ESSR. Save the entry. The
       system automatically determines value 3 (for entry of services
       performed) for the release object.
o Now create release code A1 for release group 03. Choose 'New
       Entries' and specify the following values: Grp = 03, Code = A1,
       and description, for example cost center manager.
o Create two release indicators, for example A and B. Select the
       'Released' field for release indicator B and save the entries.
       (Note: A release strategy must at least contain two release
       indicators. The first indicator (here A) must be defined as
       locked, the last indicator as released. Furthermore, the general
       changeability of the service entry sheet and the behavior for
       value changes are defined via the release indicators.)
o Finally create the release strategy. Choose 'New Entries' and
       specify the following values: Release group = 03, release
       strategy, for example RS, release codes = A1. Assign the two
       release indicators A and B via 'Release statuses'. Assign
       material group 007 via 'Classification'. Save the release
       strategy.
D) Assign the authorization for release code A1 and release group 03 to
the cost center manager. In role maintenance (Transaction PFCG), you can
for example use the default values for Transaction ML85 for that.
Regards,
Edit

Report for Service Entry Sheet in MM

Hi all,
Is there standard data source & infoproviders are available for "Service Entry Sheet (ML81N)".
We need to develop a report for service receipt confirmation along with PO & Vendor payment details.
Looking forward your answers.
With regards,
MK.

HI,
Yes, WBS wise PO details showing in T-code ME2J - Purchasing Document Per Project .
Enter the above T-code and select Database Profile ' 000000000008-PO Display for WBS' then give inputs project code,WBS Element,plant,Scope fo List-'ALV'.and execute the report. Now, report showing the selected WBS Purchase documents.
Hope, it is useful for you.
Regards,
K.Rajendran

Agent Determination for Service Entry (BO-BUS2091)

HI,
I am new to workflow and facing below issue.
I have created a workflow for Service entry sheet approval (BO- BUS2901) and I am having an issue with the agent determination. I am using my own Ztable to determine the possible agents.
I am using the following code in the FM of the rule I created for determining the agent:
FUNCTION ZME_SRV_REL_GET_RESPONSIBLE.
*"*"Local Interface:
*" TABLES
*"      ACTOR_TAB STRUCTURE SWHACTOR
*"      AC_CONTAINER STRUCTURE SWCONT
*" EXCEPTIONS
*"      NOBODY_FOUND
INCLUDE <cntain>.
TABLES: essr_rel, essr,zmm_service_mail.
DATA: object TYPE swc_object.
DATA: BEGIN OF essrkey,
lblni LIKE essr-lblni,
END OF essrkey.
DATA: verak_user TYPE csks-verak_user.
REFRESH actor_tab.
CLEAR actor_tab.
swc_get_element ac_container 'service' object.
if sy-subrc eq space.
essrkey-lblni = object-objkey(10).
select single * from essr where lblni = essrkey-lblni.
select single * from zmm_service_mail
where frggr = essr-frggr
and frgsx = essr-frgsx.
if essr-frgzu eq ' '.
verak_user = zmm_service_mail-pernr1.
elseif essr-frgzu eq 'x'.
verak_user = zmm_service_mail-pernr2.
endif.
actor_tab-otype = 'us'.
actor_tab-objid = verak_user.
append actor_tab.
endif.
ENDFUNCTION.
When I debug, sy-subrc = 8 at swc_get_element ac_container 'service' object.
What could be the problem?
Note- I have gone thru below thread but still I am unable to find the error.
http://scn.sap.com/thread/2017416

Hi,
You should re-read the thread that you quoted above. The mighty Sue Keohan suggested a solution.
Instead of trying to pass a service *object*, and then extracting the key, you can just pass the key itself. It has type EESSR-LBLN1.
swc_get_element ac_container 'service_key' lv_service_key.
if sy-subrc eq 0.
essrkey-lblni = lv_service_key.
(etc)
cheers
Paul

Manual for service entry sheet and service master

hello all,
if someone is having manual available for service entry sheet and service master....
regards,
Rahul Bhardwaj.

You have to configure service category in SPRO for service master and you can assign the number range in SPRO
The path is SPRO is:
Materials Management-External Services ManagementService Master---Define Service Category
Service Master is created using AC03
The service master record counts as part of the master data within External Services Management and serves as a source of data for you to draw upon when creating service specifications. This enables you to save time and reduces the frequency of errors, since you need only enter the complete service descriptions in the service master record once.
A service master record contains the following principal information for the unique description of a service:
Service number
Service category
Descriptive texts (short and long text)
Base unit of measure
Material group
Valuation class by which G/l account is determined
when you reference it in the PO, all the data gets transfered and you avoids the mistakes

Workflow Required for Service Entry release

Hi !,
Can anyone help me out by provide input as i want to have a workflow to be generated based on a Text feild (Sap Login ID) which user will be entering in a Text feild in Service Entry Sheet. What it should do is :
1. Should Validate with my provided list of Approved Users. (Separate table entry to be maintained with reqd T-code).
2. Mail to be triggered to his(Approver) SAP and Outlook ID for the release to be made with Document Information.
3. He Should be able to Approve / Release through Workflow.
4. Creator should be informed for the Approval Done.
Please forward your comments.
MM

Please check these helpfull links:
workflow for service entry sheet(ML81N)
Re: Workflow Template(WS) or Workflow Task(TS) for Service Acceptance (SES)
Re: Workflow issue on service receipting
Service Entry Sheet Workflow
Edited by: Afshad Irani on Jun 3, 2010 2:48 PM

Supress Mandatory field for Service Entry Sheet Creation

Hi,
I am using BDC for Service Entry Sheet creation as BAPI cannot fulfill the Business needs.
During Recording when I click on Service Overview and click on Service Selection we provide the Model Service Specification Number there I can see the Services and select it, but when I select the service and adopt, an error message ocuured to enter the quantity.
Is there any way to supress the standard error message without using acess Key.
BR
Aviram

Hi Aviram,
Messages type 'E' , 'I' or 'W' are controlled through configurations. Please check with your functional consultant with the message number you want to supress. It can be made as 'I' or 'W' through configuration.
Similarly if you do not want that particular field as mandatory field ask functional consultant to make it optional.
Regards
Sachin
Edited by: sachin G patil on Mar 9, 2011 3:13 PM
Edited by: sachin G patil on Mar 9, 2011 3:20 PM

Processing Invoices for Service Entries Via a 3rd Party System

Similar Messages

Maybe you are looking for