Processing table Dispatcher is not running
Hi All,
I am trying Web Dynpro Flights tutorial.
When I start the J2E sever through SAP Management Console
the status of the J2EE Server and SDM is running but the status of Dispatcher is always Stopped. I also tried restarting the servers by right clicking the Dispatcher and then selecting "Enable process" but still the status becomes Stopped. Hence I am unable to deploy the application and getting error.
Please let me know what could be the problem and how
to start the Dispatcher?
Thanks in advance.
Regards,
Abhijit
Hi Abhijit,
Within the file there is an error
"Wed Aug 04 15:48:42 2004
ERROR => JStartupFixMemSize: Bad memory size unit in 64 (neither K, M, of G - assuming M [jstartxx.c 1822]"
It seems that there is a parameter wrong...
So the easiest way would be to uninstall and install again. BTW - You can order the DVD via SAP Shop (http://www.sap.com/company/shop/) using the following material number 50067985.
Hope that helps.
Best regards,
Karin
Similar Messages
-
Disp+work.exe dispatcher is not running
disp+work.exe dispatcher is not running while message server and igswd.exe is running properly. SAP is installed on Windows 64bit and on oracle. this errror message occures when i restore data from cold backup
thanks for ur reply but still i am facing the same problem. i had done all the things which were mention in the note 400241and 50088. still disp+work.exe is not running. its developer trace is given below
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid TRN
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 660
Thu Feb 14 12:54:58 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 660) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Feb 14 12:55:04 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >drsap_TRN_00 <
DpShMCreate: sizeof(wp_adm) 18512 (1424)
DpShMCreate: sizeof(tm_adm) 5258160 (26160)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1744)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F0D0050, size: 5947376)
DpShMCreate: allocated sys_adm at 000000000F0D0050
DpShMCreate: allocated wp_adm at 000000000F0D1F00
DpShMCreate: allocated tm_adm_list at 000000000F0D6750
DpShMCreate: allocated tm_adm at 000000000F0D67B0
DpShMCreate: allocated wp_ca_adm at 000000000F5DA360
DpShMCreate: allocated appc_ca_adm at 000000000F5E0120
DpShMCreate: allocated comm_adm at 000000000F5E2060
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F668CF0
DpShMCreate: allocated gw_adm at 000000000F668D70
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F668DA0
DpShMCreate: allocated wall_adm at 000000000F668DB0
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1504
argv[0] = H:\usr\sap\TRN\DVEBMGS00\exe\jcontrol.EXE
argv[1] = H:\usr\sap\TRN\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS00_drsap
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2650
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=TRN
argv[7] = -DSAPMYNAME=drsap_TRN_00
argv[8] = -DSAPPROFILE=H:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS00_drsap
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( drsap) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >drsap_TRN_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Thu Feb 14 12:55:07 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 276
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2652) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1504)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Feb 14 12:55:44 2008
ERROR => W0 (pid 2116) died [dpxxdisp.c 14241]
ERROR => W1 (pid 3156) died [dpxxdisp.c 14241]
ERROR => W2 (pid 1616) died [dpxxdisp.c 14241]
ERROR => W3 (pid 1812) died [dpxxdisp.c 14241]
ERROR => W4 (pid 224) died [dpxxdisp.c 14241]
ERROR => W5 (pid 3100) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 3964) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 3316) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 3024) died [dpxxdisp.c 14241]
ERROR => W9 (pid 3780) died [dpxxdisp.c 14241]
ERROR => W10 (pid 1820) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 1712) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 3760) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:55:54 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Feb 14 07:55:54 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2116 Ended no 1 0 0
1 DIA 3156 Ended no 1 0 0
2 DIA 1616 Ended no 1 0 0
3 DIA 1812 Ended no 1 0 0
4 DIA 224 Ended no 1 0 0
5 DIA 3100 Ended no 1 0 0
6 UPD 3964 Ended no 1 0 0
7 ENQ 3316 Ended no 1 0 0
8 BTC 3024 Ended no 1 0 0
9 BTC 3780 Ended no 1 0 0
10 BTC 1820 Ended no 1 0 0
11 SPO 1712 Ended no 1 0 0
12 UP2 3760 Ended no 1 0 0
Dispatcher Queue Statistics Thu Feb 14 07:55:54 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Thu Feb 14 07:55:54 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Feb 14 07:55:54 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:55:59 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >drsap_TRN_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (4068) (SOFT_KILL)
Stop icman
killing process (1840) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:4068 HANDLE:372)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:00 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4068 HANDLE:372)
wait for end of icman
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:01 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:02 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:03 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:04 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1840 HANDLE:380)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 14 12:56:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1840 HANDLE:380)
[DpProcDied] Process died (PID:1504 HANDLE:356)
DpStartStopMsg: send stop message (myname is >drsap_TRN_00 <)
NiIMyHostName: hostname = 'drsap'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu Feb 14 12:56:12 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 300 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 300 (pos=3)
SiSelNRemove: removed sock 300
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 300
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 660) [dpxxdisp.c 10259]
Good Bye ..... -
FAIL: process hdbdaemon HDB Daemon not running - HANA
Hello guys,
I'm not being able to start a SAP HANA instance. Here's the output of the HDB start command:
I've already check the free space on the files systems as you can see here:
I can't figure out what is happening. Any suggestions?
Regards.The startup error is somewhat misleading as Serge commented above:-
> FAIL: process hdbdaemon HDB Daemon not running
In a recent HEC HANA DB startup error scenario, the clue was this message in the startup.log file in the trace directory:-
> Unable to change to Directory /usr/sap/<SID>/HDB<nn>/vh<cid><sid>db01/trace
It turned out that the profile was edited with the incorrect instance number <nn>. After correcting this error, HANA DB started up successfully. -
hi
this is sekhar
when i am starting sap dispatcher is not connecting
please suggest me to solve this problem?Is this Enterprise Search related?
Please post in appropriate forum!
Karsten -
Process with an ID not running
Hi,
I browse lot of websites and could not find any solution for this problem.
I did add CSRUN_AROUND_WORKABOUTS to environmental settings.
Rename IISEXPRESS folder
Change application config settings but nothing worked.
I need help to sort it out.
Jibran IshtiaqHi,
Please refer to the similar discussion:
http://neimke.blogspot.com/2013/07/problem-trying-to-run-web-application.html
IF not working for you, please post it in IIS forum where you can get better answers.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Process hdbdaemon HDB Daemon not running
Hi.
I was working on Hana Studio, i wanted to do a recovery, so Hana Studio stopped the instance, so i click on cancel the recovery and when i went to start again the instance it showed me this Error:
So i went to Linux Server (hanab1) to start manually HDB, and again showed me the same error:
So what can i do to fix this without doing a reinstallation of HANA???...I hope you can help so i can continue working on my client schemas.Hi Miller,
See if the below note is usefull.
A procedure is implemented in the SAP HANA database that, after a failed recovery, prevents the database that is inconsistent as a result from starting. During this, the system writes the state transitions to the topology tree of a name server during a recovery, and deletes these if the recovery is successful. If the recovery is not completed successfully, relevant entries remain in the topology tree as a result. This causes the database start to terminate.
However, due to an error in the implementation of revision 23, entries of this type were permanently written to the topology tree for failed database backups. Therefore, these entries also prevent a subsequent restart or upgrade of the SAP HANA database.
1678038 - Restarting SAP HANA database fails
Regards,
Pavan Gunda -
Hi Gurus,
I have a XI 3.5 system with Oracle 10.2 Database.
Errors
01) From MMC Dispatcher is not running
02) 'Work' Folder is also not accessible. Although the folder is showing almost 3.5 GB of Data but on clicking no files can be seen
R3trans -d is successfull, Oracle & listener is also running
Please suggest....
Regards,
Souren
Edited by: Souren on Jun 15, 2009 10:04 AMThe directory 'work' is not hidden or compressed. Same problem persists with this folder.
But now the system is up but dispatcher is yellow and following msg is showing.
"Running but dialog Queue Info Unavailable: j2ee all processes running"
The only thing that I did is I have re-initialise the auth to all SAP & Administrative users from OS level.
Please suggest
01) How to get access of the Work folder.
02) How to make the dispatcher green from yellow?
Regards,
Souren -
Mapping is not run after adding to existing Process Flow
I am about to scream.
I have a process flow that has been running fine.
I added a mapping to the existing process flow, deployed the process flow, and now when I run the process flow it will not run the new added mapping.
What gives? I am going to recreate the process flow, but I will not recreate a new process flow everytime I add a mapping to it.
What am I doing wrong.
thanks for any help.
greGOleg,
Thanks so much for all the help. I read the other posts and checked my mapping but nothing helped.
I had to put a transition line directly from the fork to my new process and it worked.
I think it was kind of a logic error on my part.
I forgot had all my maps that were called from the Fork just going straight to either Error Warning or Success endpoints.
I tried to add another process after one of the mappings.
I forgot that to do that I would have to "OR" up all the transitions coming from the forked maps.
Then proceed from there. -
ABAP Trial 7.01 SR3 Dispatcher not running
Hi All,
I have successfully installed. But when I go for strating the NSP instance from MMC, the message server runs successfully, but the dispatcher does not runs. In Syslog, I get an error message.SAP-Basis System: Failed to establish a connection to the message server.I disabled firewall and antivirus before start.
Please help.
Regards
Arindam
Edited by: Arindam Chattopadhyay on Feb 12, 2010 1:06 PM
Edited by: Arindam Chattopadhyay on Feb 12, 2010 1:27 PMHi Peter,
Thanks a lot for your reply.No Joy, same problem persists, dispatcher starts but stops in a few seconds. I have uploaded files again.
dev_icm
dev_icm_sec
dev_ms
dev_w0
dev_rd
dev_disp.
Please use the below urls for accessing those respectively (no login required).
http://docs.google.com/leaf?id=0B6acLBWN-KnrOWEyN2U1MDgtZmFhMi00MzQ1LTliMDYtZWUzZjE4YTIyOWUw&hl=en
http://docs.google.com/leaf?id=0B6acLBWN-KnrZDY4NDgxNzEtM2UxZi00ODU5LTgxZmUtZWYyODY4NzI0OTcy&hl=en
http://docs.google.com/leaf?id=0B6acLBWN-KnrZjIwYTU5OTgtMDZhMy00NjBmLWIxYWQtZjE2ZDIxNjRlYzkz&hl=en
http://docs.google.com/leaf?id=0B6acLBWN-KnrNjIwN2VjYjYtMzI0Yy00OGFkLWEwMjQtZWJiOGI3YTlmNTBk&hl=en
http://docs.google.com/leaf?id=0B6acLBWN-KnrZWI2MTFkM2EtMTUwNS00YzY3LTk5NWYtNzhkNDc5M2IxNzg3&hl=en
http://docs.google.com/leaf?id=0B6acLBWN-KnrYTYwMTI2MGMtNjJjMS00ODJjLTk5MTktMjhjZDVjODNjMjJi&hl=en
Regards
Arindam -
SHADOW system Dispatcher NOT RUNNING
Hi All,
We are upgrading from 4.7 to ECC6.0. The PREPARE went fine but during the upgrade, we are getting an error. The SAPup is not able to connect to the shadow system for running some jobs. When we checked the MMC, we found that the dispatcher is not running for our SHADOW system. We are on Windows/Oracle 10g.
Here is the dev_rfc.trc file -
ERROR file opened at 20070819 171047 Eastern Daylig, SAP-REL 640,0,144 RFC-VER 3 851602 MT-SL
T:3916 Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP'
ERROR partner not reached (host nkharb, service 3300)
TIME Sun Aug 19 17:10:47 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r.cpp
LINE 8716
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
>TS> Sun Aug 19 17:10:48 2007
T:3916 Error in program 'igsmux': ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ECC, GWHOST=nkharb, GWSERV=3300
ERROR internal error
(this retcode should be handled by caller of NI-layer)
TIME Sun Aug 19 17:10:48 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -8
MODULE nixx.c
LINE 666
COUNTER 3
ERROR file opened at 20070819 171213 Eastern Daylig, SAP-REL 640,0,144 RFC-VER 3 851602 MT-SL
T:3916 Error in program 'IGS.ECC': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2414
ERROR file opened at 20070819 171455 Eastern Daylig, SAP-REL 640,0,144 RFC-VER 3 851602 MT-SL
T:2996 Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP'
ERROR partner not reached (host nkharb, service 3300)
TIME Sun Aug 19 17:14:55 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r.cpp
LINE 8716
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
>TS> Sun Aug 19 17:14:56 2007
T:2996 Error in program 'igsmux': ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ECC, GWHOST=nkharb, GWSERV=3300
ERROR internal error
(this retcode should be handled by caller of NI-layer)
TIME Sun Aug 19 17:14:56 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -8
MODULE nixx.c
LINE 666
COUNTER 3
>TS> Sun Aug 19 17:17:01 2007
T:2996 Error in program 'IGS.ECC': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2414
T:2996 Error in program 'IGS.ECC': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2414
>TS> Sun Aug 19 17:21:21 2007
>TS> Sun Aug 19 19:09:14 2007
T:2860 Error in program 'listenerrfc': ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ECC, GWHOST=nkharb, GWSERV=3300
ERROR partner 'nkharb:3300' not reached
TIME Sun Aug 19 19:09:14 2007
RELEASE 710
COMPONENT NI (network interface)
VERSION 39
RC -10
MODULE nixxi.cpp
LINE 2985
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
>TS> Sun Aug 19 19:11:19 2007
T:2860 Error in program 'listenerrfc': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2605
>TS> Sun Aug 19 19:12:24 2007
ERROR file opened at , SAP-REL 710,0,0 RFC-VER 3 880476 MT-SL
T:3088 Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP'
ERROR partner 'nkharb:3300' not reached
>TS> Sun Aug 19 23:41:23 2007
T:3088 Error in program 'listenerrfc': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2605
>TS> Sun Aug 19 23:42:28 2007
ERROR file opened at 20070821 010533 Eastern Daylig, SAP-REL 700,0,108 RFC-VER 3 904546 MT-SL
T:960 Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP'
>TS> Tue Aug 21 01:05:34 2007
T:960 Error in program 'igsmux': ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ECC, GWHOST=nkharb, GWSERV=3300
>TS> Tue Aug 21 01:07:44 2007
T:960 Error in program 'igsmux': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2609
>TS> Tue Aug 21 01:08:49 2007
>TS> Tue Aug 21 11:54:21 2007
T:960 Error in program 'igsmux': Error RFCIO_ERROR_SYSERROR in abrfcio.c : 2609
Log for Dev_w1 is -
A RFC 2736 CONVID 16423171
A * CMRC=20 DATA=0 STATUS=0 SAPRC=236 ThSAPECMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SAP_UPGRADE_SHADOW_SYSTEM (handle: 2, , {704B2D05-0936-4393-9297-15EB6564E298})
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M Tue Aug 21 12:19:07 2007
M ***LOG R49=> ThCPICSyncWait, CPIC-Error (020236) [thxxcpic.c 3595]
M ***LOG R64=> ThCPICSyncWait, CPIC-Error ( CMINIT(SAP)) [thxxcpic.c 3608]
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host nkharb / sapgw00
M * ERROR partner not reached (host nkharb, service sapgw01)
M *
M * TIME Tue Aug 21 12:19:07 2007
M * RELEASE 640
M * COMPONENT NI (network interface)
M * VERSION 37
M * RC -10
M * MODULE nixxi.cpp
M * LINE 8715
M * DETAIL NiPConnect2
M * SYSTEM CALL SiPeekPendConn
M * ERRNO 10061
M * ERRNO TEXT WSAECONNREFUSED: Connection refused
M * COUNTER 675
M *
M *****************************************************************************
M
A RFC 2272 CONVID 16466453
A * CMRC=20 DATA=0 STATUS=0 SAPRC=236 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SAP_UPGRADE_SHADOW_SYSTEM (handle: 2, , {CE9AC984-34D3-4F59-B121-4212EF40B493})
A RFC> Called function module: RFC_PING
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Please suggestHere is the output of dev_rd -
ERROR => NiGetHdlParam: hdl 6 invalid [nixxi.cpp 5774]
Tue Aug 21 13:15:45 2007
LOCATION SAP-Gateway on host nkharb / sapgw00
ERROR partner not reached (host nkharb, service sapgw01)
TIME Tue Aug 21 13:15:45 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi.cpp
LINE 8715
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 731
GwTraceHdlInfo:
ni hdl = 9
type = CLIENT
net_stat = CONNECT_TO_REM_GW_PENDING
hostaddr = 192.168.1.107
opcode = NORMAL_CLIENT
index = 120
data = 07244F68
ext_info = 003CEE78
ERROR => NiGetHdlParam: hdl 6 invalid [nixxi.cpp 5774]
Tue Aug 21 13:15:45 2007
LOCATION SAP-Gateway on host nkharb / sapgw00
ERROR partner not reached (host nkharb, service sapgw01)
TIME Tue Aug 21 13:15:45 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi.cpp
LINE 8715
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 731
GwTraceHdlInfo:
ni hdl = 9
type = CLIENT
net_stat = CONNECT_TO_REM_GW_PENDING
hostaddr = 192.168.1.107
opcode = NORMAL_CLIENT
index = 120
data = 07244F68
ext_info = 003CEE78
ext_info = 003CEE78
offset = 0
rest_len = 64
snc_forced = 0
remote gateway infos:
hostname =
hostaddr = 192.168.1.107
service = sapgw01
tpname = sapdp01
GwTraceHdlInfo:
ni hdl = -1
type = NO_CONN_TYPE
net_stat = NET_NORMAL
hostaddr = 0.0.0.0
opcode = UNDEF_TYPE
index = -1
data = 00000000
ext_info = 00000000
offset = 0
rest_len = 0
snc_forced = 0
ERROR => NiGetHdlParam: hdl 9 invalid [nixxi.cpp 5774]
Please help me on this. -
MMC not showing J2ee process table
Dear Gurus,
I installed ECC 6.0 SR3(ABAP+JAVA) Development and Quality on the same server windows 2003 operating systems.
in MMC it is showing only development system J2ee process table it is not showing the quality system
J2ee process table.
Can any body give the solution for this.
Regards
Rao.Hi,
Please see the below link.
http://help.sap.com/saphelp_nw70/helpdata/EN/63/0f5bcdbc3611d2890d0000e8200722/frameset.htm
Anil -
My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
I manually deleted Firefox from the list once I have Windows processing.
And when I clicked on Firefox, Firefox will open quickly and easily.
Firefox process in Windows Processes names list called "firefox.exe * 32" is.
Please try to solve my problem, my problem is how to solve?Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
You might already have seen these troubleshooting articles. If not, does anything here help:
* [[Firefox won't start - find solutions]]
* [[Firefox hangs or is not responding - How to fix]] -
FAIL: process disp+work.EXE Dispatcher not running
Hi All,
I've reinstalled OS and installed NW 7.01 ABAP Trial. The installation is fine (no error). At the time I "start application server" through "SAP NW 7.01 ABAP Trial Version => NSP => Start Application Server", it shows the error on command dos window as below:
===================================================
============== Starting System NSP ================
===================================================
=============== Starting database instance ...
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
The MaxDB Database Starter, Version 7.7.04.23
Copyright 2000-2008 by SAP AG
OK
============== Starting ABAP instance ...
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
12.10.2008 12:25:40
Start
OK
12.10.2008 12:25:50
StartWait
FAIL: process disp+work.EXE Dispatcher not running
============== Start operation timed out !
Press any key to continue . . .
Please help me out,
PeerasitClean uninstall and delete 'sapdb; and 'SAP' folders. Then reinstall again.
-
Server Process is not running in the WAS JAVA
Hi,
The WAS JAVA have the resources Netweaver7.0 and java is j2sdk1.4.2_13 version Operating system is Windows2003 and database server is SQLserver2005.
Previously it was running properly Now it giving the following Error.
Any one of you please give me suggestions how to solve it .
Devolper trace for the jcontol.exe process is as follows
trc file: "D:\usr\sap\NW2\JC02\work\dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 4516
system name : NW2
system nr. : 02
started at : Mon Mar 24 17:07:20 2008
arguments :
arg[00] : D:\usr\sap\NW2\JC02\exe\jcontrol.EXE
arg[01] : pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
[Thr 4512] Mon Mar 24 17:07:20 2008
[Thr 4512] *** WARNING => INFO: Unknown property [instance.box.number=NW2JC02mmsr17] [jstartxx.c 841]
[Thr 4512] *** WARNING => INFO: Unknown property [instance.en.host=mmsr17] [jstartxx.c 841]
[Thr 4512] *** WARNING => INFO: Unknown property [instance.en.port=3203] [jstartxx.c 841]
[Thr 4512] *** WARNING => INFO: Unknown property [instance.system.id=2] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties;D:\usr\sap\NW2\JC02\SDM\program\config\sdm_jstartup.properties]
-> ms host : mmsr17
-> ms port : 3903
-> OS libs : D:\usr\sap\NW2\JC02\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> files [01] : D:\usr\sap\NW2\JC02\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : mmsr17
-> ms port : 3903
-> os libs : D:\usr\sap\NW2\JC02\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> [01] bootstrap_ID28653700 : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> [02] bootstrap_ID28653750 : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID28653700 : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> [01] ID28653750 : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> [02] sdm : D:\usr\sap\NW2\JC02\SDM\program\config\sdm_jstartup.properties
[Thr 4512] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 4512] [Node: bootstrap] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_13
[Thr 4512] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\NW2\JC02\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> node execute : yes
-> java path : C:\j2sdk1.4.2_13
-> java parameters : -Djco.jarm=1
-> java vm version : 1.4.2_13-b06
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 256M
-> root path : D:\usr\sap\NW2\JC02\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : D:\usr\sap\NW2\JC02\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\NW2\JC02\exe\jstartup.jar;D:\usr\sap\NW2\JC02\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0286537
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> arg[02] = -DSAPINFO=NW2_02_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
-> arg[06] = -nodeName=bootstrap
-> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_bootstrap.out
-> arg[08] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_bootstrap.out
-> arg[09] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
[Thr 4512] Mon Mar 24 17:07:20 2008
[Thr 4512] JControlExecuteBootstrap: read instance values after global bootstrap
[Thr 4512] *** WARNING => INFO: Unknown property [instance.box.number=NW2JC02mmsr17] [jstartxx.c 841]
[Thr 4512] *** WARNING => INFO: Unknown property [instance.en.host=mmsr17] [jstartxx.c 841]
[Thr 4512] *** WARNING => INFO: Unknown property [instance.en.port=3203] [jstartxx.c 841]
[Thr 4512] *** WARNING => INFO: Unknown property [instance.system.id=2] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties;D:\usr\sap\NW2\JC02\SDM\program\config\sdm_jstartup.properties]
-> ms host : mmsr17
-> ms port : 3903
-> OS libs : D:\usr\sap\NW2\JC02\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
[Thr 4512] JControlExecuteBootstrap: enumerate the nodes after global bootstrap
Used property files
-> files [00] : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> files [01] : D:\usr\sap\NW2\JC02\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : mmsr17
-> ms port : 3903
-> os libs : D:\usr\sap\NW2\JC02\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> [01] bootstrap_ID28653700 : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> [02] bootstrap_ID28653750 : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID28653700 : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> [01] ID28653750 : D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> [02] sdm : D:\usr\sap\NW2\JC02\SDM\program\config\sdm_jstartup.properties
[Thr 4512] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID28653700]
[Thr 4512] [Node: dispatcher bootstrap] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_13
[Thr 4512] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\NW2\JC02\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap_ID28653700]
-> node name : dispatcher bootstrap
-> node type : bootstrap
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_13
-> java parameters : -Djco.jarm=1
-> java vm version : 1.4.2_13-b06
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 256M
-> root path : D:\usr\sap\NW2\JC02\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : D:\usr\sap\NW2\JC02\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\NW2\JC02\exe\jstartup.jar;D:\usr\sap\NW2\JC02\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID028653700
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> arg[02] = -DSAPINFO=NW2_02_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
-> arg[06] = -nodeName=bootstrap_ID28653700
-> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_bootstrap_ID28653700.out
-> arg[08] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_bootstrap_ID28653700.out
-> arg[09] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_bootstrap_ID28653700
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
[Thr 4512] Mon Mar 24 17:07:20 2008
[Thr 4512] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID28653750]
[Thr 4512] [Node: server0 bootstrap] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_13
[Thr 4512] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\NW2\JC02\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap_ID28653750]
-> node name : server0 bootstrap
-> node type : bootstrap
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_13
-> java parameters : -Djco.jarm=1
-> java vm version : 1.4.2_13-b06
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 256M
-> root path : D:\usr\sap\NW2\JC02\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : D:\usr\sap\NW2\JC02\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\NW2\JC02\exe\jstartup.jar;D:\usr\sap\NW2\JC02\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID028653750
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> arg[02] = -DSAPINFO=NW2_02_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
-> arg[06] = -nodeName=bootstrap_ID28653750
-> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_bootstrap_ID28653750.out
-> arg[08] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_bootstrap_ID28653750.out
-> arg[09] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_bootstrap_ID28653750
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
[Thr 4512] Mon Mar 24 17:07:20 2008
[Thr 4512] JControlIBuildProcessList: Maximum error count is set to 4
[Thr 5144] JControlRequestFunc: Thread 5144 started as listener thread for np messages.
[Thr 4512] [Node: dispatcher] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_13
[Thr 4512] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\NW2\JC02\exe\jvmx.jar
JStartupIReadSection: read node properties [ID28653700]
-> node name : dispatcher
-> node type : dispatcher
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_13
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -XX:NewSize=57m -XX:MaxNewSize=57m -XX:NewRatio=3 -XX:DisableExplicitGC -verbose:gc -XX:UseConcMarkSweepGC
-> java vm version : 1.4.2_13-b06
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 170M
-> init heap size : 170M
-> root path : D:\usr\sap\NW2\JC02\j2ee\cluster\dispatcher
-> class path : .\bin\boot\boot.jar;.\bin\system\bytecode.jar;.
-> OS libs path : D:\usr\sap\NW2\JC02\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\NW2\JC02\exe\jstartup.jar;D:\usr\sap\NW2\JC02\exe\jvmx.jar
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
[Thr 4512] [Node: server0] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_13
[Thr 4512] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\NW2\JC02\exe\jvmx.jar
JStartupIReadSection: read node properties [ID28653750]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_13
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> java vm version : 1.4.2_13-b06
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 1024M
-> init heap size : 1024M
-> root path : D:\usr\sap\NW2\JC02\j2ee\cluster\server0
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : D:\usr\sap\NW2\JC02\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\NW2\JC02\exe\jstartup.jar;D:\usr\sap\NW2\JC02\exe\jvmx.jar
-> parameters :
-> debuggable : yes
-> debug mode : yes
-> debug port : 50221
-> shutdown timeout : 120000
[Thr 4512] INFO: Invalid property value [Debbugable=yes]
[Thr 4512] [Node: SDM] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_13
[Thr 4512] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\NW2\JC02\exe\jvmx.jar
JStartupIReadSection: read node properties [sdm]
-> node name : SDM
-> node type : sdm
-> node execute : yes
-> java path : C:\j2sdk1.4.2_13
-> java parameters :
-> java vm version : 1.4.2_13-b06
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 256M
-> root path : D:\usr\sap\NW2\JC02\SDM\program
-> class path : D:\usr\sap\NW2\JC02\SDM\program\bin\SDM.jar
-> OS libs path : D:\usr\sap\NW2\JC02\j2ee\os_libs
-> main class : SDMInternal
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\NW2\JC02\exe\jstartup.jar;D:\usr\sap\NW2\JC02\exe\jvmx.jar
-> shutdown class : com.sap.sdm.jstartup.shutdown.InternalShutDown
-> parameters : server sdmhome=D:\usr\sap\NW2\JC02\SDM\program
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
[Thr 4512] JControlMSConnect: attached to message server (mmsr17/3903)
[Thr 5340] JControlMSMessageFunc: Thread 5340 started as listener thread for ms messages.
JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> arg[02] = -DSAPINFO=NW2_02_dispatcher
-> arg[03] = -nodeId=0
-> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
-> arg[06] = -nodeName=ID28653700
-> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_dispatcher.out
-> arg[08] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_dispatcher.out
-> arg[09] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_dispatcher
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
[Thr 4512] JControlICheckProcessList: process dispatcher started (PID:5444)
JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> arg[02] = -DSAPINFO=NW2_02_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
-> arg[06] = -nodeName=ID28653750
-> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
-> arg[08] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
-> arg[09] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
-> arg[10] = -mode=JCONTROL
-> arg[11] = -debugMode=yes
-> arg[12] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
[Thr 4512] JControlICheckProcessList: process server0 started (PID:4684)
JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> arg[02] = -DSAPINFO=NW2_02_sdm
-> arg[03] = -nodeId=2
-> arg[04] = -file=D:\usr\sap\NW2\JC02\SDM\program\config\sdm_jstartup.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
-> arg[06] = -nodeName=sdm
-> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_sdm.out
-> arg[08] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_sdm.out
-> arg[09] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_sdm
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
[Thr 4512] JControlICheckProcessList: process SDM started (PID:5472)
[Thr 4512] JControlMSSendLogon: delete SDM logon information (rc=0)
[Thr 4512] Mon Mar 24 17:07:20 2008
[Thr 4512] JControlMSSendLogon: insert SDM logon information (port=50218; rc=0)
[Thr 4512] Mon Mar 24 17:07:20 2008
[Thr 4512] JControlICheckProcessList: process server0 (pid:4684) died (RUN-FLAG)
[Thr 4512] JControlIResetProcess: reset process server0
[Thr 4512] JControlIResetProcess: [server0] not running -> increase error count (1)
[Thr 4512] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID28653750 1189856249 -bz D:\usr\sap\NW2\SYS\global
JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> arg[02] = -DSAPINFO=NW2_02_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
-> arg[06] = -nodeName=ID28653750
-> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = -debugMode=yes
-> arg[15] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
[Thr 4512] JControlICheckProcessList: process server0 started (PID:3944)
[Thr 4512] Mon Mar 24 17:07:20 2008
[Thr 4512] JControlICheckProcessList: process server0 (pid:3944) died (RUN-FLAG)
[Thr 4512] JControlIResetProcess: reset process server0
[Thr 4512] JControlIResetProcess: [server0] not running -> increase error count (2)
[Thr 4512] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID28653750 1189856314 -bz D:\usr\sap\NW2\SYS\global
JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> arg[02] = -DSAPINFO=NW2_02_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
-> arg[06] = -nodeName=ID28653750
-> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = -debugMode=yes
-> arg[15] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
[Thr 4512] Mon Mar 24 17:07:20 2008
[Thr 4512] JControlICheckProcessList: process server0 started (PID:4308)
[Thr 4512] Mon Mar 24 17:07:20 2008
[Thr 4512] JControlICheckProcessList: process server0 (pid:4308) died (RUN-FLAG)
[Thr 4512] JControlIResetProcess: reset process server0
[Thr 4512] JControlIResetProcess: [server0] not running -> increase error count (3)
[Thr 4512] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID28653750 1189856350 -bz D:\usr\sap\NW2\SYS\global
JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> arg[02] = -DSAPINFO=NW2_02_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
-> arg[06] = -nodeName=ID28653750
-> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = -debugMode=yes
-> arg[15] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
[Thr 4512] JControlICheckProcessList: process server0 started (PID:2616)
[Thr 4512] Mon Mar 24 17:07:20 2008
[Thr 4512] JControlICheckProcessList: process server0 (pid:2616) died (RUN-FLAG)
[Thr 4512] JControlIResetProcess: reset process server0
[Thr 4512] JControlIResetProcess: [server0] not running -> increase error count (4)
[Thr 4512] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID28653750 1189856405 -bz D:\usr\sap\NW2\SYS\global
[Thr 5144] Mon Mar 24 17:07:20 2008
[Thr 5144] JControlRequestFunc: receive command:10, argument:1 from pid:0
[Thr 5144] JControlIDumpStackTrace: dump stacktrace for server0
[Thr 5144] *** ERROR => Can't send command for stack dump (rc=-3) [jcntrxxi.c 1403]
[Thr 5144] Mon Mar 24 17:07:20 2008
[Thr 5144] JControlRequestFunc: receive command:19, argument:1 from pid:0
[Thr 5144] JControlITraceIncrement: increment trace level for server0
[Thr 5144] *** ERROR => Can't send command for trace level increment (rc=-3) [jcntrxxi.c 1434]
[Thr 5144] Mon Mar 24 17:07:20 2008
[Thr 5144] JControlRequestFunc: receive command:4, argument:1 from pid:0
[Thr 5144] JControlIEnableProcess: enable process server0
JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> arg[02] = -DSAPINFO=NW2_02_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
-> arg[06] = -nodeName=ID28653750
-> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = -debugMode=yes
-> arg[15] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
[Thr 4512] JControlICheckProcessList: process server0 started (PID:3556)
[Thr 4512] Mon Mar 24 17:07:20 2008
[Thr 4512] JControlICheckProcessList: process server0 (pid:3556) died (RUN-FLAG)
[Thr 4512] JControlIResetProcess: reset process server0
[Thr 4512] JControlIResetProcess: [server0] not running -> increase error count (5)
[Thr 4512] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID28653750 1189856490 -bz D:\usr\sap\NW2\SYS\global
[Thr 5144] Mon Mar 24 17:07:20 2008
[Thr 5144] JControlRequestFunc: receive command:4, argument:1 from pid:0
[Thr 5144] JControlIEnableProcess: enable process server0
JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> arg[02] = -DSAPINFO=NW2_02_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
-> arg[06] = -nodeName=ID28653750
-> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = -debugMode=yes
-> arg[15] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
[Thr 4512] JControlICheckProcessList: process server0 started (PID:2872)
[Thr 4512] Mon Mar 24 17:07:20 2008
[Thr 4512] JControlICheckProcessList: process server0 (pid:2872) died (RUN-FLAG)
[Thr 4512] JControlIResetProcess: reset process server0
[Thr 4512] JControlIResetProcess: [server0] not running -> increase error count (6)
[Thr 4512] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID28653750 1189858000 -bz D:\usr\sap\NW2\SYS\global
[Thr 5144] Mon Mar 24 17:07:20 2008
[Thr 5144] JControlRequestFunc: receive command:10, argument:1 from pid:0
[Thr 5144] JControlIDumpStackTrace: dump stacktrace for server0
[Thr 5144] *** ERROR => Can't send command for stack dump (rc=-3) [jcntrxxi.c 1403]
[Thr 5144] Mon Mar 24 17:07:20 2008
[Thr 5144] JControlRequestFunc: receive command:8, argument:1 from pid:0
[Thr 5144] JControlIDisableDebugging: disable debugging server0
[Thr 5144] JControlIEnableProcess: restart process server0
[Thr 5144] Mon Mar 24 17:07:20 2008
[Thr 5144] JControlRequestFunc: receive command:4, argument:1 from pid:0
[Thr 5144] JControlIEnableProcess: enable process server0
JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> arg[02] = -DSAPINFO=NW2_02_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
-> arg[06] = -nodeName=ID28653750
-> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
[Thr 4512] JControlICheckProcessList: process server0 started (PID:4836)
[Thr 5144] Mon Mar 24 17:07:20 2008
[Thr 5144] JControlRequestFunc: receive command:8, argument:1 from pid:0
[Thr 5144] JControlIDisableDebugging: disable debugging server0
[Thr 5144] JControlIEnableProcess: restart process server0
[Thr 5144] JControlIProcessSoftKill: soft kill of process server0 (pid:4836)
[Thr 5144] Mon Mar 24 17:07:20 2008
[Thr 5144] JControlRequestFunc: receive command:8, argument:1 from pid:0
[Thr 5144] JControlIDisableDebugging: disable debugging server0
[Thr 5144] JControlIEnableProcess: restart process server0
[Thr 5144] Mon Mar 24 17:07:20 2008
[Thr 5144] JControlRequestFunc: receive command:8, argument:1 from pid:0
[Thr 5144] JControlIDisableDebugging: disable debugging server0
[Thr 5144] JControlIEnableProcess: restart process server0
[Thr 4512] Mon Mar 24 17:07:20 2008
[Thr 4512] JControlICheckProcessList: process server0 (pid:4836) died (STOPPING)
[Thr 4512] JControlIResetProcess: reset process server0
JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> arg[02] = -DSAPINFO=NW2_02_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
-> arg[06] = -nodeName=ID28653750
-> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
[Thr 4512] JControlICheckProcessList: process server0 started (PID:5428)
[Thr 4512] Mon Mar 24 17:07:20 2008
[Thr 4512] JControlICheckProcessList: process server0 (pid:5428) died (RUN-FLAG)
[Thr 4512] JControlIResetProcess: reset process server0
[Thr 4512] JControlIResetProcess: [server0] not running -> increase error count (7)
[Thr 4512] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID28653750 1189860005 -bz D:\usr\sap\NW2\SYS\global
[Thr 5144] Mon Mar 24 17:07:20 2008
[Thr 5144] JControlRequestFunc: receive command:8, argument:1 from pid:0
[Thr 5144] JControlIDisableDebugging: disable debugging server0
[Thr 5144] JControlIEnableProcess: restart process server0
[Thr 5144] Mon Mar 24 17:07:20 2008
[Thr 5144] JControlRequestFunc: receive command:4, argument:1 from pid:0
[Thr 5144] JControlIEnableProcess: enable process server0
JControlStartJLaunch: program = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\NW2\JC02\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> arg[02] = -DSAPINFO=NW2_02_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=D:\usr\sap\NW2\JC02\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4516
-> arg[06] = -nodeName=ID28653750
-> arg[07] = -jvmOutFile=D:\usr\sap\NW2\JC02\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=D:\usr\sap\NW2\JC02\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=D:\usr\sap\NW2\JC02\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=D:\usr\sap\NW2\SYS\profile\NW2_JC02_mmsr17
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;D:\usr\sap\NW2\JC02\j2ee\os_libs;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;D:\usr\sap\NW2\SYS\exe\uc\NTI386
[Thr 4512] JControlICheckProcessList: process server0 started (PID:5196)
[Thr 4512] Mon Mar 24 17:07:20 2008
[Thr 4512] JControlICheckProcessList: process server0 (pid:5196) died (RUN-FLAG)
[Thr 4512] JControlIResetProcess: reset process server0
[Thr 4512] JControlIResetProcess: [server0] not running -> increase error count (8)
[Thr 4512] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_13\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID28653750 1189860117 -bz D:\usr\sap\NW2\SYS\global
[Thr 5144] Mon Mar 24 17:07:20 2008
[Thr 5144] JControlRequestFunc: receive command:8, argument:1 from pid:0
[Thr 5144] JControlIDisableDebugging: disable debugging server0
[Thr 5144] JControlIEnableProcess: restart process server0
[Thr 5144] Mon Mar 24 17:07:20 2008
[Thr 5144] JControlRequestFunc: receive command:8, argument:1 from pid:0
[Thr 5144] JControlIDisableDebugging: disable debugging server0
[Thr 5144] JControlIEnableProcess: restart process server0
Thanks,
VivekHi Vivek,
FYI :
JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\NW2\JC02\exe\jvmx.jar
The above message can be ignored. You will see that message often in perfectly up/running systems as well.
Also, the dev_jcontrol file shows that the server process was terminating !
You need to check std_server0.out file for the errors/exceptions as to why server0 was terminating abruptly. The reason should be apparent from dev_server0 and std_server0 most of the times unless its a startup framework bug where the error messages are not written to the log files.
So, whenever the server process or dispatcher process fails to start, you should check the corresponding dev_server<n> or dev_dispatcher and std_server<n> / std_dispatcher files. Also, usually, there will be some exception (if its application related) in the defaultrace file as well under server<n>\log or dispatcher\log depending on which one is failing to start.
e.g. if server0 is failing to start due to some UME issues, you will see the mention of it in std_server0.out (definitely) and more ellaborate info/exceptions in deafultrace under server0\log as well.
Hope the above helps. -
I'm stumped. I have a really odd situation. Any help is appreciated...I've deleted the page, reloaded the app, deleted all the processes and recreated them...all to no avail.
I have about 20 after submit processes. Everything seems to look OK. However, a couple of the processes don't seem to be executing and others are executing but not listed in the debug on the page.
Example of debug:
0.03: ...Process "Get PK for PHYSICAL_INTERFACE_ID Create/Create Another": PLSQL (AFTER_SUBMIT) declare function get_pk return varchar2 is begin for c1 in (select PHYSICAL_INTERFACE_ID_SEQ.nextval next_val from dual) loop return c1.next_val; end loop; end; begin :P780_PHYSICAL_INTERFACE_I
0.03: ...Session State: Saved Item "P780_PHYSICAL_INTERFACE_ID" New Value="32"
0.04: ...Do not run process "Get PK for PHYSICAL_INTERFACE_ID Create/Done", process point=AFTER_SUBMIT, condition type=, when button pressed=CREATE
0.04: ...Process "Get PK for VIRTUAL_INTERFACE_ID Create/Create Another": PLSQL (AFTER_SUBMIT) declare function get_pk2 return varchar2 is begin for c1 in (select VIRTUAL_INTERFACE_ID_SEQ.nextval next_val from dual) loop return c1.next_val; end loop; end; begin :P780_VIRTUAL_INTERFACE_ID
0.05: ...Session State: Saved Item "P780_PKG_RETURN_VALUE2" New Value="ERROR: Problem Creating Virtual Interface Table"
0.05: ...Do not run process "Call stored procedure - Virtual Interface Create/Done", process point=AFTER_SUBMIT, condition type=, when button pressed=CREATE
After running the process "Get PK for VIRTUAL_INTERFACE_ID Create/Create Another" I would expect to see a session state saved similar to the physical interface at time .03 The saved item "P780_PKG_RETURN_VALUE2" actually occurs in a process at a later sequence (which is actually much later--it seems to have skipped a couple processes).
Has anyone else see this type of problem? The last thing I can do is recreate the whole page (ouch!).
Thanks,
-CarmineGood afternoon. I am running Apex 3.1 and Oracle 10.2.0.4 on RHEL 4.
The stranger part is that I have another box running a slightly older version of the Apex application--and that one works. The differences were not in this area/on these pages. Strange.
I tried remove and rewrite all the processes, deleting the page and copying it from another load of the application, etc. Since it was a development box, I'm reloading everything.
I can try to get something up on apex.oracle.com. But it was so odd as Apex saw the processes. I even opened SQL developer to look at the processes and it looked good. Yet somehow it seemed to skip a process (not even show that it wasn't to run due to conditions), and the session state from the PK not showing but another process.
I've never seen anything like it. In my investigation, I will note that something went wrong (invalid) with ctxsys.driload. I forgot the exact error. I'm not very familiar with this package.
Thanks,
-Carmine
Maybe you are looking for
-
HT4929 Should I move to icloud if none of my devices are compatible?
I have a macmini and a macbook air both with 2GB ram running snow leopard, an iphone 3G running iOS4.2.1 and and an original ipad. I was a .mac member and a mobileme member. I stopped using mobileme to sync contacts and calendars because for some rea
-
Problem with SipServerConnection in JSR180
Hello everybody, I am developing a notification system to J2ME clients from a J2SE application, I am implementing SUBSCRIBE/NOTIFY service. My J2ME application sends SUBSCRIBEs perfectly, and receives their OK responses, but when receiving NOTIFY req
-
How to show at least one "0" before decimal ?
Sometimes numbers are displayed which are lower than 1 e.g. 0.034 (=US format) However when they are displayed in sqlplus then they are shown as .034 How can I achieve that in such cases one 0 is prepended so that 0.034 is shown?
-
Can't Play Video Files in Lightroom 4
I can import video files (.mov) into Lightroom 4 but I can't play them. I can play them in Photoshop CS6 Beta. The Control Bar with the "Play" icon doesn't show and the space bar does nothing.
-
How do I troubleshoot my iPad if the apple won't go away
MY iPad apple won't go away how do I fix this?