Processor always at 50% minimum, several services no longer function

Recently I've run into a problem where upon booting my system, one of the cores is at max utilization and internet access shuts down within a few seconds after turning on the machine.
When viewing active processes in Activity Monitor, none of the processes appears to be using any processor power, what could be going wrong?
I've tried reformatting with a fresh install of the OS, this appeared to fix the problem for about a week, then the problem returned. Reformatted again, same story.
Please help!

I've tried reformatting with a fresh install of the OS, this appeared to fix the problem for about a week, then the problem returned.
You've got a hardware issue that you can not fix. Call AppleCare.

Similar Messages

Hi, im having problems with my iphone it would always be showing up "No Service" even when I get my simcard out, when i turn airplane mode it would switch to " Searching" and then go back to "No Service", i have tried restoring several times, but nothing

Hi, im having problems with my iphone it would always be showing up "No Service" even when I get my simcard out, when i turn airplane mode it would switch to " Searching" and then go back to "No Service", i have tried restoring several times, but nothing has changed. I must say that my iphone was working perfectly until the last months my battery began to die all from a sudden, so my phone got turn off really frequently, so then i ordered a battery and changed it myself so when phone was on.. it had this problem.. im desperate here

No I haven´t take it to Apple Store, i think I will actually. My iphone was jailbroken and ulocked with gevey sim, but when this failures began i decided to restore it, and I did preserve the baseband, but when I took it into one of these "Places" they told me it would be a good idea to do a clean restore and see if this fixed the problem so I upgraded my baseband, and right now my iphone is freshly restore, no jailbreak no nothing.
Btw yes something like a year ago my screen was replaces by others not by apple, but I didnt had any issues after this.. until today (a little more than a year later).

Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I have a wndiws 7 system and use a Intel core processor. I have restarted several times and still ge this

Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I have a wndows 7 system and use a Intel core processor. I have restarted several times and still ge this error. I have also tried to reinstall firefox and get the same error
== This happened ==
Every time Firefox opened
== today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MDDS; InfoPath.2; .NET4.0C; AskTbUT2V5/5.8.0.12304)

'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

My iphone 5 *****. Always losses signal. No service. Omg so frustrating. Called AT

My iphone 5 *****. Always losses signal. No service. Omg so frustrating. Called AT&T bunch of times and still nothing. If this doesn't get resolved vary soon I'm switching to galaxy s4. Any pointers?

Try restarting your iPhone. Press and hold the power and home button for 10 seconds and then turn your device back on. Otherwise, the place where you currently are may not have very good signal for ATT.

Getting SEVERE: Service Unavailable (503):while running promote_content.bat

hi,
can anyone help me on this issue
all four services are working fine
D:\Endeca\APPS\CRS\control>promote_content.bat
[09.23.13 19:24:56] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[09.23.13 19:25:14] INFO: Definition has not changed.
[09.23.13 19:25:14] INFO: Promoting IFCR content...
[09.23.13 19:25:16] SEVERE: Service Unavailable (503):
Occurred while executing line 3 of valid BeanShell script:
1|
2|
3| IFCR.promoteFromAuthoringToLive();
4|
5|
[09.23.13 19:25:16] SEVERE: Caught an exception while invoking method 'run' on object 'PromoteAuthoringToLive'. Releasing locks.
Caused by java.lang.reflect.InvocationTargetException
sun.reflect.NativeMethodAccessorImpl invoke0 - null
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.utility.IFCRUtility$HttpStatusException
com.endeca.soleng.eac.toolkit.utility.IFCRUtility execute - Service Unavailable (503):

Looks like the workbench was down when you were trying to promote your content. Did you check that ? By default workbench runs on 8006 and its accessible @ http://localhost:8006 with admin/admin as default userid/password.
-Naga

Enterprise Services, Service Operations and Functional Business Component

Hi,
in the Enterprise Service desing guide (see https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/40c05360-0501-0010-63bd-aedd415b6e05 ) the relations between Enterprise Services and Service Operations are covered.
I understand that one Enterprise Service consists of one or more Service Operations. For Example General Ledger Processing ES offers seven Service Operations. (See Solution Composer)
Functional Business Components offer one or more Enterprise Services and several Service Operations. As mentioned in the Design Guide, an Enterprise Services is dedicated to a certain Functional Business Component. An Enterprise Service could use several Service Operations of one ore more Functional Business Components.
When browsing the Solution Composer I couldn't discover any Enterprise Service that uses Service Operations of more than one Functional Component.
Here's my question: Does anyone know an Enterprise Service described in the Solution Composer which uses Service Operations of several Functional Business Components? If there aren't any, why?
Regards,
Sebastian

Sebastian,
I haven't looked through the entire set of preview services, but most of what I have seen is consistent with what you are describing. I think the short answer is the ESA preview system is really a pre-release of the intial ESR which itself is essentially an extension of XI's integration repository. These are basically the finer grained object and interface level services.
SAP should be releasing some significant content updates to this ESR after NW2004S goes GA later this year. More importantly the next edition of the ESR tied to the BPP release will greatly expand on the scope including containing the more complex service defintions and process models which cut across components that you are looking for.

Minimum Voltage for how long?

Minimum Voltage for how long b/4 it f's something up?
I just found that my V-core is only 1.28v. And it has to be due to the 12 volt only being 12A I hadn't noticed that this was bad until I ran Sandra. I can't get it over that mark even by cranking it up in the bios. What should the amps be? I know I have read all the best power supplies posts but I gather that the 12v is for the processor so that should be the highest. But any damage at my current voltage? I have been running it for a week.

did you plug in both mobo plugs. the small 4 pin is also a 12v supply.
if the psu had two main leads you spread out the load on both leads to your drives fans etc.
look on the back of you psu(or top there should be a sticker with max loads etc what does that say, while your at it, check to make sure red 115V/220V swithch is is right spot ie..115 vfor us
the 12A was on label? under what? input current
I have a compusa 600W precision power, which i am sure is a cheapo unit
but it has 30A +5v..25A+3.3v..28A..+12v...6A-12v...6A -12v..2A+5vsb
+3,+5+12 max combined load is 570W input current 11A for 115v
12a is way low I think the cpu is @9amps by its self.
you have 3 hd and 2 dvd/cd's
...I would run to the store and get a new psu pronto.
I have read underpowering can damage also, but not as bad as overpowering.
But broke is broke

Good day. as I can do to update my iphone 4 to the latest version of ios 5. whenever you connect to the pc and try to update the waiting time is very long, sometimes up to 12 hours and despite the wait always produce an error message for a long time waiti

good day. as I can do to update my iphone 4 to the latest version of ios 5. whenever you connect to the pc and try to update the waiting time is very long, sometimes up to 12 hours and despite the wait always produce an error message for a long time waiting

Disable ALL security software (firewall, antivirus/spyware, etc.) running on your PC while updating.

Test web service for a function module

Hello,
I have created web service for a functiona module. I can see the same service in SE80 in Enterprise Services.
How do I test this service?
I can see the URL in WSDL tab but when I try to execute it give me following error,
What has happened?
URL http://emhbssap15.domain.local:8027/sap/bc/srt/wsdl/sdef_service_name/wsdl11/ws_policy/document call was terminated because the corresponding service is not available.
Note
The termination occurred in system BDV with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:EMHBSSAP15_BDV_27-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
The URL I am trying is
http://emhbssap15.domainname:8027/sap/bc/srt/wsdl/sdef_servicename/wsdl11/ws_policy/document?sap-client=400
Can anyone help me?
Regards,,,
Sunil Joyous
Edited by: Sunil Joyous on Dec 2, 2009 1:52 PM

Thanks Venu for your input.
Unfortunetly we do not have Java stack on our development system. You said we can test it by SOAP UI tool. Where do I see the WSDL file for the service?
I used WSDL from SE80 --> Service --> WSDL tab, but SOAP UI does not accept this format ?
What are the other ways I can test this web service? I think about SAP PI, importing RFC & creating web service or creating ABAP proxies... Which is the best way to go forward in case you do not have Java stck.
Regards,,,
Sunil Joyous

Location services no longer working after 4.3.3 update.

I have a 3rd Gen 32GB touch, and after updating the software today, my location services no longer work. My device fails to find my location for the maps app, as well as other 3rd party apps. There was no problem with finding my location prior to this update, and other devices on my network aren't having an issue pinpointing a location either.
I have tried restoring my iPod as well as turning the location services on and off.
Any help would be greatly appreciated (:

I have the same iTouch and have experienced the same problemafter updating the software.
If you go to Settings>Location Services and it says “ON yet it’s gray and faded, please read on.
Go to Settings>General>Restrictions (Enter Passcode)>Allow Changes:Location
The page should have something that would say “Allow Changes”, “Don’t AllowChanges”….and some of the 3rd party apps that need location servicesas you mentioned listed below. Tap “Allow Changes” and slide “Location Services”ON. Then manually slide the 3rd party apps that you want to enableLocation Services to ON.
Then, you’re good. Hope it works out. Frustrating, I know.

Generic Object Services ; create attachment function grey out in Tcode KA03

Hi all,
I would like to know how can I enable create attachment function in GOS toolbar in Tcode KA03.
Currently it was grey out.
However, was tried to use the same function in KS03 and it works.Please help. Thanks!

I just found the solution...
SAP note : 961572
Symptom
In the transactions for displaying cost elements (KA03) and changing cost elements (KA02), the 'Services for Object' function does not work correctly, as most Generic Object Services are unavailable.
Other terms
KA03, KA02, SWO1, K_OBJECT_SERVICES_INITIALIZE, BUS1059, BUS1030
Reason and Prerequisites
The problem is caused by a program error.
Solution
Implement the attached program corrections
Then go to Transaction SW01 (Business Object Builder), enter BUS1059 as the object type, click Change, and make the following changes:
Navigate to Methods -> RevenueType.Display, press F2 to select it, and go to the 'ABAP' tab page: Select the 'Transaction' radio button, enter the name as KA03, and click 'Save'
Navigate to Attributes -> Attribute properties, select the 'Mandatory' checkbox, and click 'Save'
Then change the release status by navigating as follows:
Edit -> Change Release Status -> Object Type -> To implemented
Edit -> Change Release Status -> Object Type -> To released
Then double-click BUS1059 (or select using F2) in SWO1 to reach the 'General' tab page, which should appear as follows:
ObjectType BUS1059 Revenue element
Object Name RevenueType
Program RBUS1059
Objtype status generated Saved released

Service For Objects functionality (SDV transaction)

Hello experts,
Some users are getting an authorization error while trying to display an image from t-code FBL1N (services for objects). After identifying the reason of this issue with NSU53, the simple fix is to provide access to the user to transaction SDV. Actually, we are proposing to the security team to provide the access in a Generic role, so all user can get the access.
Their concern is that if for any reason, any of the users runs the t-code directly (SDV), and not through the Services for Objects funtionality, they might be able to access other documents that they should not be allowed. To be honest, I haven't seen this as an issue before in my 13 years working with SAP.
The question for you guys is: what is the best approach to grant access to users from different modules to Services for Objects functionality without violating security policies?
Thanks,
Alfredo

own

Responsible Service Org and Service Team (partner function)

Hi all CRM gurus,
I'm trying to understand the reasons behind the following design and I hope someone can clarify some points for me:
1. Organisation structure in CRM is set up with service organisation followed by service team, e.g.
ABC Company
|_Call Center 1 (the service organisation indicator under Function is selected)
|_ Region A
                   |_ Service Team A (the local service team indicator under Function is selected)
                                 |_ User Nancy
|_Call Center 2 (the service organisation indicator under Function is selected)
|_ Region B (the service organisation indicator under Function is selected)
                   |_Service Team B (the local service team indicator under Function is selected)
                                 |_ User Mary
2. Organisation determination is set up using rule 14000148 and assigned to the transaction type Z001 for interaction transaction.
3. A service team partner function is created and set up to be determined automatically via the user's assignment in the org structure (14000148). This partner is configured to be made available on the interaction record screen.
4. When a new interaction is created by user Nancy, the system automatically derives the following
Responsible service org = 'Service Team A'
Service organisation = 'Call Center 1'
Service team partner = 'Service Team A'
5. When user Nancy decides that this call should be looked after by another group, she assigns the user Mary and changes the Service team partner to 'Service Team B'. The reason why she has to change the service team partner manually is that the system does not automatically re-determine the partner in change mode.
What I can see is that the focus here is on the service team (which is the partner) and there is no means to update the service organisation and responsible service organisation. So, when the user is changed to Mary, although the service team is captured correctly, the corresponding responsible service organisation (i.e. Service Team B) and service organisation (i.e. call center 1) still remains the same. Is this acceptable?
I would think that the responsible service organisation and service organisation needs to be re-determined but this is not the case.
Are there any reasons why one would not re-determine the responsible service and service organisations?
The service team (partner) and the responsible service and service orgs seem to be handled quite independently which is another area that I don't understand. What is the benefit of having a service team partner?
I have not seen a lot of queries in this area so am not sure whether my thinking is correct or not.
Appreciate some pointers on the above.
Cheers!
SF

Hi Anyone? Any opinion or comments on this set up?

"Service no longer supported. Account is not acces...

Hello. Since this morning (Thursday 29th) I can't seem to access my emails via Hotmail. It is the only email system I use. I just get the following message: "Service no longer supported. Account is not accessible anymore."
What does this mean? I've tried removing my account and setting it up again but same thing. I googled it and it seems other people have had this problem but there is nothing about why or how to fix it. I've read something about Microsoft changing Hotmail or Outlook or something. Can someone help?

Never mind I've just turned off my phone, taken out the battery and sim, wiped the sim and put it in after 2 minutes. Turned it on and its working again Not sure if the clearing cache thing worked but thanks

Tracking of Service master LONG TEXT changes

Hi ,
I know we have functionality to track changes made in a Service master thru Change Documents .... but it doesn't show the changes made in SERVICE MASTER long text.
How can we see those changes ?
Regards
shrey

Changes to long text are not stored in CDHDR/CDPOS tables.
You can only see that there was a change, but not what was changed in detail.

Processor always at 50% minimum, several services no longer function

Similar Messages

Maybe you are looking for