Procurement at Depot and CIN configuration
Dear all,
We have a depot procurement. When we create a PO on external vendor at depot, put a tax code on invoice tab at item level. The excise duty details are not seen on the taxes tab, where as the VAT value is defaulted from tax code. Even excise duty rates and values are not defaulted at the time of GR into excise details tab.
The same tax code when used for the other plants, we can see the excise duty details on the invoice tab ( taxes) as well as the excise duty rates and amount are defaulted in the GR.
The material excise details are already maintained in J1ID.
Further more we have to input the excise duties manually at the time of excise invoice change in J1IG.
Pls also tell how to post the excise invoice at depot so that RG23D is updated correctly?
Where to look for the folio number?
Regards.
Milind
Hi,
For Folio Numbers; go to SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Maintain Excise Groups > here for Excise group, under "Depot Settings", activate "Folio Numbers" indicator.
As a result of this, it automatically generates a folio number when you post a goods receipts and goods issues that are recorded in register RG 23D.
If you use this function, maintain the number ranges for the folio number in J1I9 for No Range Object J_1IRG23D (Folio Numbers).
Now for automatic copy of Excise Duties in J1IG; activate indicator "Depot Excise Invoice" in the same screen.
As a result of this, it automatically verifies and posts the selection of excise invoices that you have assigned to a delivery from a depot.
Similar Messages
-
Foriegn Trade and CIN configuration for SD
Hi all,
Can anybody please send me step by step procedures regarding
1. Foriegn trade configuration in SD Module wrt India.
2. CIN configuration in SD Module.
Regards,
KhanYou require to do thenecessay configuration for Foreign Trade Data:
IMG --> Sales and Distribution --> Foreign Trade/Customs --> Basic Data for Foreign Trade --> (Do the necessary configuration here)
In most probability, it will not default, but it is required to be maintained in Invoice (based on configuration)
Regards,
Rajesh Banka
Reward points if helpful. -
Difference in CIN configuration of depot sales and factory sales
Hi all,
I have just completed CIN configuration of a manufacturing plant. I want to know waht would be different in cin configuration of depot sales and factory sales. please guide me in this regard.
thanks,
Vikranthi vikrant,
first define the plant as either depot or factory. this can be dne by putting a chek mark against the plant in the depot column. then you need to knw if the depot is excisble or non excible. for excisible depot there will be an excise registration number maintained for the non excisble there will be none.
then define the excise groups against each plant. here u again define the depot or non depot settings, the kind of excise invoices, the registers (RG1 for factory and RE23D for depot).
saurabh -
CIN configuration in TAXINJ and TAXINN !!
Friends !!
Please help in configuring TAXINJ and TAXINN for VAT, Higher Edn.cess.If possible send me screen shots for the same and how to maintain taxcodes.
Thanks.
Yours sincerely,
sreedharDear sreedhar kodali,
CIN Means Country India Version
In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenarios. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself.
Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better)
Country Version India comes with four pricing procedures as follows:
- JINFAC (Sales from manufacturing plants)
- JINEXP (Export sales)
- JINDEP (Sales from depots)
- JINSTK (Stock transfers
CIN: IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings > Maintain Excise Registrations
In this IMG activity, you maintain the data relating to your excise registrations.
- Enter each of your excise registrations, specifying a four-character code for each Excise Registration Ids
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
- For each excise registration in your business create a registration ID, and state:
- Which taxes the registration covers (additional excise duty, special excise duty, and cess) Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
- The maximum number of items to be printed on each excise invoice
- Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
ECC Number: Specifies the organization's ECC number.
Excise Registration Number: A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division: Specifies the excise division in whose area the excise registration is located.
Excise Collectorate: The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming, AED usage Additional Excise duty Percentage.
These are livable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty. Example - Additional Excise duty is livable in case of textile products, tobacco and sugar.
Similarly for SED CESS Number of Items in Excise Invoice Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies - This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements. This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description: Description of the excise registers set.
Partial CENVAT Credit: Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account
Dependencies - When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings.
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings.
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator - Excise year start month. The calendar month marking the beginning of the excise year. This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure :Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received. Number of excise invoices to be selected Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection Number of days from document date for excise invoice selection.
Example - If the value of this field is 20 and today is 28-03-97. The excise invoice selection will show the related invoices only for the period 08-03-97 to 28-03-97.
Document type for TDS FI posting: Financial accounting document type for TDS posting.
Document type for FI posting on Utilisation Financial accounting document type for TDS posting.
Indicator for item level excise duty round off - This indicator is to be used for deciding whether Item level excise
duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice - You can round off the Excise amount to be paid during an outgoing
Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods - Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts. The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account - Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type - Key representing a type of exchange rate in the system.
- You enter the exchange rate type to store different exchange rates. Example - You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts - When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings - In this IMG activity, you maintain excise information relating to your plants.
Plant Settings - In this activity, you maintain excise information relating to your plants.
For each plant:
- Specify whether it is a manufacturing site or a depot.
- Assign it an excise registration ID. - You can assign the same ID to more than one plant, if required.
Depot - Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
- Number of goods receipt per excise invoice.
- Multiple GR for one excise invoice, Single credit
- Multiple GR for one excise invoice, multiple credit
Maintain Excise Groups - In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups - In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation - Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
1. Create one excise group for each set of registers that you need to keep.
2. Assign the excise groups to plants.
3. Maintain whether this Excise group is for a depot or not.
If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock. Excise Group Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration. - In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to. At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
- GR Per Excise Invoice
- Multiple GR for one excise invoice , Multiple credit
- Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically - Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background. - If you want to make use of this function, you must also define the
default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option - RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step. If this is not selected then you need to separately do RG23D selection
followed by PGI and then RG23D verification and posting. If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR - If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo Posting - If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
- Blocked stock
- Stock transport order
- Consignment stock
Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
- Define excise series groups based on type of outgoing document
- Assign series group to excise registration ID
- If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
- If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
- No account postings for CENVAT in sales cycle
- No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators - In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty > Select Tax Calculation Procedure
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
- If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
- If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults - In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
- Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
- Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
- Specify the conditions in the sales order that are used for excise rates.
- Specify the countervailing duty condition type used for import purchase orders.
See also : SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features : The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Customizing : Make the settings in Customizing Basic -> India -> for Logistics General, by choosing Taxes on Goods Movements Account -> Excise Duties Using Condition Technique and -> Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data - Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities - When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for. On the dialog box, Control Code means "chapter ID." So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose .
5. Enter data as required. - In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination - When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data®access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.
You maintain the following types of data:
- Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone. See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
- Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry. For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
- Customer master data
Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
- Material master data
Each material is assigned a chapter ID.
- Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant. Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indicator is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under
status 7.
Define Tax Code for Purchasing Documents - In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents. Only carry out this activity if you use condition-based excise
determination.
- Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
- Assign Tax Code to Company Codes
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types - In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method. The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a
purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here. In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
- For taxes on purchases, use the condition types contained in the tax procedure.
- For taxes on sales, use the condition types contained in the pricing procedures.
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes - In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements - You have set up G/L accounts for each of the processing keys listed below.
- Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
- VS1 (basic excise duty)
- VS2 (additional excise duty)
- VS3 (special excise duty)
- VS5 (sales tax setoff)
- MWS (central sales tax)
- MW3 (local sales tax)
- ESA (service tax)
- ESE (service tax expense)
Specify Excise Accounts per Excise Transaction - In this IMG activity, you specify which excise accounts (for excise
duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type. If you use sub transaction types, enter the accounts for each sub transaction type as well.
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly. The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example:
- Excise TT DC ind Account name
- GRPO CR CENVAT clearing account
- GRPO CR RG 23 BED account
- GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction - In this IMG activity, you assign the excise and CENVAT accounts to G/L
accounts. When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
- Excise group
- Company code
- Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
- Defined the G/L accounts
- Defined the excise groups
- Maintained the transaction accounts
Activities - For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note : you need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty. Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
- Material Master à Logistics General
1. Go to IMG Define Structure of Data Screen for each Configuring the Material master Screen Sequence.
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Sub screens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view sub screen and ensure that the sub screen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade
Import, Excise related sub screen appears.
A small search on SDN SD forum will help you to answer your query.
I will suggest you to visit http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
Moreover there is a separate section of FAQs with answers which will help you in great deal.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
P.S. you can send me a mail at my mail id [email protected] for any specific details -
CIN Configuration settings and T.codes
Please, Can anyone explain about the CIN Proess in MM and important configuration of IMG settings? I would like to know the Important transaction codes used for the CIN Business scenarios. Also give some link related to CIN .
Regards,
ThiruHi,
***CIN CONFUGURATION***
1.1 Maintain Excise Registration
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Basic setting Maintain Excise Registrations
APPLICABLE
1.2 Maintain Company Code Settings
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Basic setting Maintain Company Code Settings
APPLICABLE
1.3 Maintain Plant Settings
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Basic setting Maintain Plant Settings
APPLICABLE
1.4 Maintain Excise Groups
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Basic setting Maintain Excise Groups
APPLICABLE
1.5 Maintain Series Groups
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Basic setting Maintain Series Groups
APPLICABLE
1.6 Maintain Excise Duty Indicators
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Basic setting Maintain Excise Duty Indicators
APPLICABLE
1.7 Maintain Subtransaction Type with Text
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Basic setting Maintain Subtransaction Type with Text
APPLICABLE
1.8 Determination of Excise Duty
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Determination of Excise Duty Select Tax Calculation Procedure
APPLICABLE
1.9 Maintain Excise Defaults
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Determination of Excise Duty Maintain Excise Defaults
APPLICABLE
1.10 Condition-Based Excise Determination
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Condition-Based Excise Determination Define Tax Code for Purchasing Documents
APPLICABLE
1.11 Condition-Based Excise Determination
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Condition-Based Excise Determination Assign Tax Code to Company Codes
APPLICABLE
1.12 Classify Condition Types
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Condition-Based Excise Determination Classify Condition Types
APPLICABLE
1.13 Maintain Chapter IDs
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Master data Maintain Chapter ids
APPLICABLE
1.14 Assign Users to Material Master Screen Sequence for Excise Duty
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Master data Assign Users to Material Master Screen Sequence for Excise Duty
APPLICABLE
1.15 Specify Excise Accounts per Excise Transaction
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Account determination Specify Excise Accounts per Excise Transaction
APPLICABLE
1.16 Specify G/L Accounts per Excise Transaction
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Account determination Specify G/L Accounts per Excise Transaction
APPLICABLE
1.17 Incoming Excise Invoices
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Business Transactions Incoming Excise Invoices
APPLICABLE
1.18 Define Processing Modes Per Transaction
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Business Transactions Define Processing Modes Per Transaction
APPLICABLE
1.19 Define Reference Documents Per Transaction
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Business Transactions Define Reference Documents Per Transaction
APPLICABLE
1.20 Maintain Rejection Codes
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Business Transactions Maintain Rejection Codes
APPLICABLE
1.21 Specify Which Movement Types Involve Excise Invoices
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Business Transactions Specify Which Movement Types Involve Excise Invoices
APPLICABLE
1.22 Outgoing Excise Invoices
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Business Transactions Outgoing Excise Invoices Assign Billing Types to Delivery Types
APPLICABLE
1.23 Maintain Default Excise Groups and Series Groups
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Business Transactions Outgoing Excise Invoices Maintain Default Excise Groups and Series Groups
APPLICABLE
1.24 Subcontracting Attributes
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Business Transactions Subcontracting Subcontracting Attributes
APPLICABLE
1.25 Maintain Movement Type Groups
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Business Transactions Subcontracting Subcontracting Attributes
APPLICABLE
1.26 Utilization Determination
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Business Transactions Utilization Utilization Determination
APPLICABLE
1.27 Specify SAPscript Forms
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Business Transactions Excise Registers Specify SAPscript Forms
APPLICABLE
1.28 Number Ranges
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Tools Number Ranges
APPLICABLE
1.29 Message Control
SPRO SAP Ref. IMG Logistics general tax on Goods MovementsIndia Tools Message Control
APPLICABLE
For check the link:
http://www.mysaphelp.com/blog/?p=118
Regards,
Biju K -
Cin and brs configuration materila
Can anybody send CIN and BRS configuration material to my mail ID [email protected]
Thanks in advancehi
Bank Reconcilliation Statement
The following are the steps for BRS:
Create Bank Master Data - This can be created through T.Code FI01 or you can also create the house bank through IMG/FA/Bank accounting/Bank account
2. Define House Bank
3. Set up Bank selection payment programe- IMG/FA/ARAP/BT/AUTOIP/PM/Bank selection for payment prg.
a. setup all co codes for payment transaction - Customer and vendors
b.setup paying co codes for payment transactions
c.setup payment method per country
d.setup payment method per co code for payment transaction
e.setup bank determination for payment transaction
Please go for Cheque mangement using T code FCHI (IMG/FA/ARAP/BT/OP/AutoOp/PaymentMedia/CheckManagement) and for void reasons FCHV. You can create Bank Reconcilliation statement by TC FF67 (SAP/AC/Treasury/CashManagement/Incomings/ManualBankStatement) . Don't forget to keep the opening Balance as zero. Use FBEA for post process.
All the steps together will lead to (FF67) Bank reconciliation statement.
for CIN
http://help.sap.com/bp_bblibrary/500/documentation/U40_BB_ConfigGuide_EN_IN.doc
http://help.sap.com/saphelp_erp2005vp/helpdata/en/dd/ab17adedc9438fb548a8d86efbb187/frameset.htm
nagesh -
Hi All,
Can anybody tell me Link about CIN (Configuration and about CIN) and MM configuration.
Thanks in Advance.
Pankaj Garghi
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/erplo/cin%2bconfiguration
http://help.sap.com/bp_bblibrary/600/html/J05_EN_IN.htm
http://www.scribd.com/doc/2527809/CINcustomizing-1
thank to original poster
regards
kunal -
CIN Configuration Doccument needed
Hello friends
Can anybody give me the Complete CIN configuration Doccuments (including Screen Shots) for FI step by step for TDS , Excise , CST , VAT ,Export / Import Procedures,etc.I dont know from where to start and how to start.
Pls help me out in my configuration.
Regards
Anup
Points are assuredHi Anup,
We cant send screen shots for now,but i am sending detailed list of configuration CIN.i think this is very usefull to you
Re: CIN Configuration
Posted: Sep 21, 2007 6:25 AM in response to: vudumula sriniv... E-mail this post
Hi
Refer below link and also search in sdn you have no ogf posts on this issue
http://help.sap.com/saphelp_470/helpdata/en/95/00bb3cfbe1624be10000000a114084/frameset.htm
SAP SD CIN Configuration
What is CIN?
CIN Means Country India Version
In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenarios. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself.
Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better)
Country Version India comes with four pricing procedures as follows:
- JINFAC (Sales from manufacturing plants)
- JINEXP (Export sales)
- JINDEP (Sales from depots)
- JINSTK (Stock transfers
CIN: IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings > Maintain Excise Registrations
In this IMG activity, you maintain the data relating to your excise registrations.
- Enter each of your excise registrations, specifying a four-character code for each Excise Registration Ids
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
- For each excise registration in your business create a registration ID, and state:
- Which taxes the registration covers (additional excise duty, special excise duty, and cess) Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
- The maximum number of items to be printed on each excise invoice
- Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
ECC Number: Specifies the organization's ECC number.
Excise Registration Number: A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division: Specifies the excise division in whose area the excise registration is located.
Excise Collectorate: The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming, AED usage Additional Excise duty Percentage.
These are livable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty. Example - Additional Excise duty is livable in case of textile products, tobacco and sugar.
Similarly for SED CESS Number of Items in Excise Invoice Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies - This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements. This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description: Description of the excise registers set.
Partial CENVAT Credit: Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account
Dependencies - When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings.
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings.
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator - Excise year start month. The calendar month marking the beginning of the excise year. This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure :Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received. Number of excise invoices to be selected Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection Number of days from document date for excise invoice selection.
Example - If the value of this field is 20 and today is 28-03-97. The excise invoice selection will show the related invoices only for the period 08-03-97 to 28-03-97.
Document type for TDS FI posting: Financial accounting document type for TDS posting.
Document type for FI posting on Utilisation Financial accounting document type for TDS posting.
Indicator for item level excise duty round off - This indicator is to be used for deciding whether Item level excise
duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice - You can round off the Excise amount to be paid during an outgoing
Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods - Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts. The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account - Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type - Key representing a type of exchange rate in the system.
- You enter the exchange rate type to store different exchange rates. Example - You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts - When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings - In this IMG activity, you maintain excise information relating to your plants.
Plant Settings - In this activity, you maintain excise information relating to your plants.
For each plant:
- Specify whether it is a manufacturing site or a depot.
- Assign it an excise registration ID. - You can assign the same ID to more than one plant, if required.
Depot - Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
- Number of goods receipt per excise invoice.
- Multiple GR for one excise invoice, Single credit
- Multiple GR for one excise invoice, multiple credit
Maintain Excise Groups - In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups - In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation - Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
1. Create one excise group for each set of registers that you need to keep.
2. Assign the excise groups to plants.
3. Maintain whether this Excise group is for a depot or not.
If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock. Excise Group Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration. - In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to. At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
- GR Per Excise Invoice
- Multiple GR for one excise invoice , Multiple credit
- Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically - Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background. - If you want to make use of this function, you must also define the
default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option - RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step. If this is not selected then you need to separately do RG23D selection
followed by PGI and then RG23D verification and posting. If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR - If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo Posting - If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
- Blocked stock
- Stock transport order
- Consignment stock
Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
- Define excise series groups based on type of outgoing document
- Assign series group to excise registration ID
- If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
- If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
- No account postings for CENVAT in sales cycle
- No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators - In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty > Select Tax Calculation Procedure
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
- If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
- If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults - In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
- Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
- Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
- Specify the conditions in the sales order that are used for excise rates.
- Specify the countervailing duty condition type used for import purchase orders.
See also : SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features : The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Customizing : Make the settings in Customizing Basic -> India -> for Logistics General, by choosing Taxes on Goods Movements Account -> Excise Duties Using Condition Technique and -> Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data - Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities - When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for. On the dialog box, Control Code means "chapter ID." So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose .
5. Enter data as required. - In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination - When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data®access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.
You maintain the following types of data:
- Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone. See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
- Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry. For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
- Customer master data
Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
- Material master data
Each material is assigned a chapter ID.
- Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant. Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indicator is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under
status 7.
Define Tax Code for Purchasing Documents - In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents. Only carry out this activity if you use condition-based excise
determination.
- Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
- Assign Tax Code to Company Codes
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types - In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method. The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a
purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here. In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
- For taxes on purchases, use the condition types contained in the tax procedure.
- For taxes on sales, use the condition types contained in the pricing procedures.
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes - In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements - You have set up G/L accounts for each of the processing keys listed below.
- Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
- VS1 (basic excise duty)
- VS2 (additional excise duty)
- VS3 (special excise duty)
- VS5 (sales tax setoff)
- MWS (central sales tax)
- MW3 (local sales tax)
- ESA (service tax)
- ESE (service tax expense)
Specify Excise Accounts per Excise Transaction - In this IMG activity, you specify which excise accounts (for excise
duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type. If you use sub transaction types, enter the accounts for each sub transaction type as well.
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly. The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example:
- Excise TT DC ind Account name
- GRPO CR CENVAT clearing account
- GRPO CR RG 23 BED account
- GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction - In this IMG activity, you assign the excise and CENVAT accounts to G/L
accounts. When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
- Excise group
- Company code
- Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
- Defined the G/L accounts
- Defined the excise groups
- Maintained the transaction accounts
Activities - For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note : you need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty. Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
- Material Master à Logistics General
1. Go to IMG Define Structure of Data Screen for each Configuring the Material master Screen Sequence.
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Sub screens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view sub screen and ensure that the sub screen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade
Import, Excise related sub screen appears.
Hope this helps to you
Prem -
Batch Selection config. in Excise Invoice Creation (J1IJ) at Depot in CIN
Hi,
In the business scenario that I have to map in SAP system stock transfer occurs from Plant to Depot. Then the batch is split at the Depot and minor changes are made to characteristic. These individual small batches and then sold to the end customer from depot.
<b>Problem:</b> If the batch number is kept the same at depot as the incoming batch number, system is able to find the incoming invoice in J1IJ. If the batch number is changed (to mark individual characteristic) then the system in not able to idetify the incoming batch.
Please help...
In SAP help link http://help.sap.com/erp2005_ehp_02/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm I could find mention that "You can also automate this procedure, using the batch selection program (J_1IJCHK), by making the appropriate Customizing settings in the Country Version India (CIN) Implementation Guide (IMG)." Can anyone help by elobarinting what specific configuration is to be made for batch selection?
Thanks
RajatHi,
SAP has released a SAP note 1001446 which can be implemented for your requirement. There is an user exit J_1I7_USEREXIT_BATCH_CHK_FLAG which has the parameter NO_BATCH_CHK_FLAG. If you pass the value ' X' to the parameter NO_BATCH_CHK_FLAG then the batches will not be checked during J1ij. you can implement this user exit through SE37.
Regards,
Murali -
Pricing procedure for Depot Sales(CIN Version)
HI,
Can anyone explain me TAXINJ and
The Pricing procedure for Depot Sales(CIN Version)
alongwith the Condition Types like JMOD,JECS,JECX etc.
Points will be given
Regrds,
BinayakHi Binayak.
JMOD is a FI Tax condition which gets the Basic Excise duty from calculation formula 352. JEX2 is a copy of JMOD and is a Sales pricing condition. The value of JEX2 gets posted for Excise account key. This ensures that the cost accounting of excise value paid is done correctly. In cases where commercial invoice is created after utilization the condition value formula 353 ensures that the actual MODVAT utilized is accounted as excise.
Similarly JAED is a FI Tax condition which gets the Additional Excise duty from calculation formula 352. JEXA is a copy of JAED and is a Sales pricing condition. The accounting is done for the value of JEXA.
JSED is a FI Tax condition which gets the Special Excise duty from calculation formula 352. JEXS is a copy of JSED and is a Sales pricing condition. The accounting is done for the value of JEXS.
JCES is a FI Tax condition which gets the CESS from calculation formula 352. JCED is a copy of JCES and is a Sales pricing condition. The accounting is done for the value of JCED.
So, Conclusion :---->
JMOD -- > Basic Excise duty condition for FI side.
corresponding to it,
JEX2 is the Basic Excise duty condition for SD side.
That's why
account key to JMOD is linkes in TAXINJ.
and
account key to JEX2 is linkes in JDEPOT.
Hope this certainly helps you.
Please reward points if found useful to you.
Let me know if you have any other doubt.
Regards,
Gaurav Raghav. -
Maintain CIN configuration & Pricing Procedure for Trading Company
Hi Experts,
Our client is a Trading Company. In this company...first they purchase finish goods and than sale it. They are not selling their material to the manufactures. They are not creating the excise invoice.
Please suggest us how to maintain CIN configuration & maintain Pricing Procedure for them.
Thanks in advance.
Regards,
ShatrughanHi,
Create 2 tax codes in T-code FTXP
1 for VAT, 2nd for CST
then you define 2 condition types in v/06,
ex:ZVAT,ZCST
place these 2 condition types in your pricing procedure in V/08
And in VK11 maintaine condition records.
Thank you, -
Issue : with CIN configuration
Hello frinds
After finishing of cin configuration ,Actualy where do link in fico and start in(FICO) Plz let me know this.
thanks
priyarani
Moderator: Please, respect the rules: don't use SMS language, post in proper forums and the most important SEARCH before postingThanks Prasanna/JP
The mistake was from my side. I had not maintained condition records for these condition types.
JEXT IN A/R BED total 100.000 %
JECT IN A/R Ecess TOT 100.000 %
JHET IN A/R S&H eduCesTOT 100.000 %
The values are capturing now in excise invoice.
Thanks and Regards
Adithya -
Need Cin Configuration related to sd
HI,
This is kiran i want to know about contry India Version (CIN) can any one help to know about this in detail.
Thanks in Advance,
KiranThere are mainly links, sdn thread & message, sdn wiki & doc flowing around.
Only thing required from your side is to put afford to search them.
Thus, kindly put an afford to search for the topics search you want and if you find any problem in that then post your query on any of the respective forum.
For instance, follow the following link:
- [CIN Configuration|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=ERPLO&title=CIN+Configuration&decorator=printable]
- export sale
- Excise Invoice
- Re: Two tax rates in VF01 screen
Thanks & Regards
JP -
Dear Experts,
I have following query.
There is one trading company which purchases exisable materials. Since it is a trading company, no cenvat of excise is taken and no registers are maintained. This company also purchases services. The credit on services and vat are being taken by them.
Please tell me whether the CIN configurations have to be maintained for trading company or not? And how the credit on service tax and Vat will be taken in this company?
Thanks & Regards,
Aaditya
Moderator message : Not related to ABAP development. Post the question in relevant functional forum. Thread locked.
Edited by: Vinod Kumar on Sep 20, 2011 1:33 PMDear Experts,
I have following query.
There is one trading company which purchases exisable materials. Since it is a trading company, no cenvat of excise is taken and no registers are maintained. This company also purchases services. The credit on services and vat are being taken by them.
Please tell me whether the CIN configurations have to be maintained for trading company or not? And how the credit on service tax and Vat will be taken in this company?
Thanks & Regards,
Aaditya
Moderator message : Not related to ABAP development. Post the question in relevant functional forum. Thread locked.
Edited by: Vinod Kumar on Sep 20, 2011 1:33 PM -
Dear All,
I have to do SD-CIN configuration, following TAXINN, I am not much aware about it.
Request you to provide the documents and guidelines to configure the basic excise duty, Education cess and Higher Education
Cess in case of TAXINN.
Thanks in advance
RahulHi,
Check the below linkfo r more details SD CIN Config.
http://www.sap-img.com/sap-sd/sap-sd-cin-configuration.htm
Regards,
Kishore K
Maybe you are looking for
-
Using bapi in lsmw posting g/l account
hi experts, i am trying to post a document in lsmw using bapi method. i am using business object: BUS6030 (Accounting GL posting). method : POST. when trying to mapping the line items i coudnt find the line item NEWBS(po
-
Isssue in publishingWSDL for @WebServiceProvider
I wrote an simple JAX-WS webservice for @WebServiceProvider. After deploying it as war while accessing the WSDL i am facing below error. :/GPSProxy spec-version:2.5]] Servlet failed with Exception java.lang.NullPointerException at weblogic.wsee.jaxws
-
Standard Program for User Maintaince
hi friends can anybody give me the standard prograname in which has output , user name , tcode which has acces with descriptions regards
-
Macbook will not sleep automatically
Hi I've recently noticed that my Macbook will not sleep automatically, even when the power management is set to sleep at minimum (1 minute). It will sleep if I do it via the menu, however if I walk away from the machine with the lid up, it just won't
-
Hi, We have one full rak exalogic machine, we are running weblogic on it. The question is, on each node on exalogic, how many managed server's can we create , considering all the application does the same thing. currently we care running managed serv