Produciton Order link to SO/STO

Hello all,
Is there any way we can obtain the link between Sales Order/STO and the production order in MTS scenario?
Thanks a lot!
Deepak

Hi Deepak
In MTO scenario, you would have the reference of SO in the production order.
If you have configured the MTO, when you run the MRP the planned / production orders would be automatically created based on the sales orders on hand.
Award points so as to say thanks.
Regards,
Suraj

Similar Messages

  • Open PIR quantity, unconverted Pld orders and open Prod/ STO orders

    Dear all,
    How to deal with open PIR quantity, unconverted planned orders and open production/ STO orders in the next MRP run? Do we need to delete/ reduce them manually?
    Thanks and Regards,
    Raghu

    Hi Shiva,
    Thanks for your immediate response. I have still some confusion.
    Last month, I have material A with Production order quantity of 30000.
    'A' has a component 'B' which is an in-house produced material. Three planned orders each of 10000 were generated for B. Of these two planned orders were converted to production orders. One is still in planned order form.
    This month I am not going to use this planned order of B. I get new requirement for A. So during MRP run I get the planned orders for B also.
    For the last month requirement, as I have not converted one planned order of B to prod order, there will an open quantity of A prod order in this plant and open STO quantity in another plant. Again the PIR will also be not reduced to the same extent. If I reduce the PIR manually or through some reorganization, what about the open quantity of prod order and STO
    I think I can TECO the prod order of A. Is there any such thing for STO also?
    Thanks and Regards,
    Raghu

  • What happens sales order linked with wip job is cancelled

    HI,
    what happens sales order linked with wip job is cancelled ?
    actually if wip job is cancelled then sales order lines is on hold ?
    i wanted to know what if sales order of that wip job item line is cancelled say example  if that wip job already is in processing .
    please help me
    Thanks in Advance.

    If WIP job cancelled or Requisition/PO is cancelled, corresponding order line reservation will be cleared and will go to 'Supply Eligible' Status. Progressing this line will again follow the WIP/Requisition path based on item.

  • Sales order link to MRP run

    Dear gurus,
    I have one query regarding sales order link to MRP run.
    I had created sales order by VA01 & also independent requirement in MD61.
    Both are acknowledged in MRP run.I know the requirement in MD61 transferred for MRP run(MD02/MDBT/MD01).
    But my question is how sales order requirement considered in MRP run i.e. link to MRP run.Is there any customization?
    Pl.suggest the same...
    Rg,
    Tushar

    Hi,
    Strategy 11  :-
    Sales Order creation - no impact.
    BSF    Gross planned independent requirements 
    KSL    Sale from stock without independent                                                                               
    Requirement reduction
    Goods Receipt - minus the quantity for the oldest planned independent in demand management. For e.g. if PIR is 100 and delivery 90, PIR becomes 10 (withdrawal 90).
    Delivery - no impact as delivery is issue from sales order.
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Create a purchase order linked to sale order with DI

    Hello all,
    I tried to create a purchase order based on a sale order with the DI but I get an error message "the business partner selected in base document is different than the target document"
    As you understand, this is normal to have a different business partner. So my question is : is it possible to create with the DI a purchase order linked to a sale order or is this a missing functionality ?
    Thank you
    Sebastien

    Hi sébastien,
       oDoc.Lines.ItemCode = "A00001"
        oDoc.Lines.Quantity = 1
        oDoc.Lines.BaseType = 17
        oDoc.Lines.BaseEntry = 213
    A Purchase document's BaseType can only be a Purchase document itself.
    A Sales document's BaseType can only be a Sales documento itself.
    To create a Purchase Order based on a Sales Order you must go through each row of the Sales Order and copy the values (ItemCode, Quantity, Discounts, VatGroup, etc.) to the Purchase Order.  And remember the VATCode used in a Sales document cannot be the same as the one used in a Purchase document.
    Best Regards,
    Vítor Vieira

  • Rounding base requirement quantities of produciton orders

    Hello,
    We are using component scrap in BOMs for components that are tracked with EA as base unit of measure. This causes fractional requirement quantites for these components in MRP. Also in MB26 or MB1A we are facing fractional quantities. We do not want to post goods movements with fractional quantites for the materials that have EA as base UoM. Our requirement is to supply these transactions with quantities that are rounded to integers?
    We tried using an alternative UoM that has 0 decimal places. In components' master data, we assigned these UoM to unit of issue. MRP seems to work fine, producing requirement quantities as integers. In produciton orders converted from planned orders, requirement quantites are also integers. Whereas in produciton orders created with CO01 and CO10, although unit of entry (ERFMG) is calculated with no decimals, base requirement quantity (BDMNG)  is fractional and it is being used in transactions MB1A and MB26. At the point of goods issue, system exhibits an odd behaviour of showing the UoM as unit of issue but taking the quantity from base requirement quantity.
    Entering a rounding value of 1 to these components did not work either.
    We thought we could manipulate requirement quantities prior to kitting or during goods movement with the help of user exits. However for the sake of sticking with the standart we'd rather solve this problem with customization. Any help will be appreciated.
    Thanks,
    Ozgen CANAN

    Thanks Jiaul,
    The alternative UoM I explained before has decimal rounding value of zero. However this does not prevent base quantity to be fractional. Changing the decimal rounding value of EA to 0 is not applicable since it is being used widely. Changing directly the base UoM of components related with component scrap would not work either as far as I have read and according to the note 931971.

  • CIC Activity and Sales Order Link Tables?

    Hello Experts,
    Can somebody let me know the CRM Customer Interaction Center(CIC) activity and its leading Sales Order Link tables or the data model?
    If somebody could point me to CRM CIC Data model it would be real helpful.
    If you have any document please send it to [email protected]
    Thank you
    Arun

    Arun,
    You should be able to use the document flow function mod : 'CRM_DOC_FLOW_READ_OB' to get any leading documents
    CALL FUNCTION 'CRM_DOC_FLOW_READ_OB'
         EXPORTING
           IV_HEADER_GUID  = wa_activity_guid
         IMPORTING
           ET_DOC_FLOW_WRK = lt_doc_flow.

  • Email Sales order link from SAP Work Place

    Dear SAP Gurus,
    Well guys i have to mail the sales order link through the work place but its not working for the sales order. but its working for delivery order and billing document...so i want to know that why its not working?
    Regards,
    Mohsin

    Dear All,
    Can u please help me on this situation? I will be very thankful to u....
    Regards,
    Mohsin

  • Produciton order status TECO, but WIP is not equal to zero

    Dear Expert,
    In OKGC,
    1000     0     000002     REL     2     WIP Calculation on Basis of Actual Costs
    1000     0     000002     DLV     3     Cancel Data of WIP Calculation and Results Ana
    1000     0     000002     PREL     1     WIP Calculation on Basis of Actual Costs
    *1000     0     000002     TECO     4     Cancel Data of WIP Calculation and Results Ana
    We checked produciton order status TECO (CO03)
    but WIP is not equal to zero (KKAO)
    Also, we found production order status show "rel" status in KKAO.
    Why order status in CO03 is TECO, but show "REL" in KKAO?
    Thanks in advance.

    Hi,
    We also had similar issue that the WIP is not equal to zero even though the status of the Process Order is DLV/TECO. When we analyzed, we found that few of the operations/resources/activityeps are not yet confirmed in the same month for the order. These operations/resources/activityeps are confirmed in subsequent month, then WIP got automatically Zero.
    Also refer the SAP Note 530563 - WIP calculation: Status DLV and TECO. Which provide the details for how WIP will get calculated.
    Thanks & regards,
    ADI

  • Collective production order link based on parent production order in MTS with strategy 10

    Dear Team,
    Now we are using MTS Production order system with strategy 10,As per my Business requirement we need to take all the child components production
    orders based on the Parent component production order .In this case for planned order conversion we are using CO40 transaction code(i.e. Collective conversion) as well as all planned orders  generated through MRP. As per my business process we are using Route cards which are Z smart forms with all Production orders from parent to child component with quantity is taken as a PDF printout,As per our customer requirement we will store those Route cards up to next 15 years. When user has to check Production order linking at any point of time, this functionality is not available for MTS. I tried MD4C but it is not a best solution for my business requirement.So please provide any another standard solution available for this requirement.
    Thanks in advance,
    Regards,
    Krishna.

    There is another suggestion that you can determine the costing indicator in the requirement class. you can get the requirement type from procurement page in the sales order header, then go the customizing menu to find out which requirement class has been assigned to the requirement type. Then you can get the "costing" and "mark" indicator.
    The customizing menu is the node of controlling - cost object controlling -> CO PC for sales order.
    Correct me if i am wrong, thanks.
    Best Regards!
    Flex Yang

  • Lineitem detial for confirmation/produciton order-othr thn 0pp_c03/0pp_c01?

    Dear Friend,
    I am using 0pp_c03(work center view) for confirmation order detial But while first full load  i am getting latest total record i.e. order confirmed on 4 diffrent days than we are getting sum of confirm quantity of all 4 days with latest confirmation date
    same with when using 0pp_c01(order view) for produciton order detial But while first full load  i am getting latest total record i.e. order confirmed on 4 diffrent days than we are getting sum of GR quantity of all 4 days with latest confirmation date
    this above records we can compare(matching) with coois transaction of ECC.
    are there any other infoprovider(Cube. Ods. Multiprovider, Infoset. etc....) for getting line item wise detail   i.e. if confirmation or GR done in 4 diffrent day for same order than i want all 4 days confirmation quantity & GR quantity's with its posting date in 4 diffrent line(not like that 0pp_c01/0pp_c03 - sum of all 4 days quantity with latest date performed in system)?
    Regards
    Dushyant.

    Hi All,
    Is there any other cube/ods/multiprovider from where we can get this lineitem wise detail?

  • Pre-order link Crashed????

    It seems that the pre-order link for the iPhone 4 has crashed!

    Apple Online Store (pre-order started at 4:00AM ET on 06/15/2010)...attempted to order 2 black iPhone 4 (32gb) individually for family plan to ship to my house and it kept giving me local store pickup option.
    so I ordered via my AT&T Premier (business) account for 2 black iPhone 4 (32gb) - two separate credit card transaction - and the process took less than 10 minutes.
    Pre-orders for iPhone 4 will begin to arrive on June 24, 2010. Orders will be shipped on a first-come, first-served basis. The date of actual shipment and receipt of your order is not guaranteed and may be subject to delays.
    iPhone 4 will ship within 3 to 5 business days regardless of the selected shipping method.
    FedEx Free Priority Overnight Delivery ($0.00)
    UPS 2nd Day Delivery ($0.00)
    UPS Next Day ($14.95)
    Shipping Carrier:
    Unless you are an employee of UPS, USPS or DHL, your shipment should ship via FedEx.

  • Make produciton order long text mandatory...

    Hi All..
    We want to make produciton order long text mandatory. Tried with SHD0 where we unable to find the proper field. please confirm is it possible with any ways???
    one more thing ... what ever the long text has been entered in the produciton order, how to pull the text to confirmation screen (CO11N).
    Please provide the inputs....
    Edited by: srinivas rapelly on Dec 19, 2008 12:26 PM

    Hi Srinivas,
    SAP has provided the Long Text Tab screen only for Information purpose. Hence it is not possible to make it mandatory.
    One thing can be tried out - Try to use some User Exit in Production Order creation and see that the order will not be saved untill the Long Text field is entered with some text.
    Similarly use one more User Exit in Production Order Confirmation and see that the data from the Production Order Long text screen is populated.
    Take the help of ABAPer.
    Hope this will help.
    Regards
    radhak mk

  • Sales Order Completed Status through STO SD Delivery

    Hi,
    (a) Demand is created for FG with strategy 50 for 100 qty in plant 1000.
    (b) Sales Order received for 100 qty with customer as alternative plant 2000.
    (c) Production completed in plant 1000 and now stock is available specific to that sales order.
    (d) Requirement is to deliver the sales order stock of 100 qty from plant 1000 to plant 2000. ie; Inventory of plant 1000 should be upated. For this we created STO scenerio.
    (e)STO created using SD deliver and PGI MT 641 by Tcode VL10B and auto GRN Update. We could achieve the Sales order specific stock delivery from plant 1000 to plant 2000.
    (f) Sales Order stock reduced in plant 2000, but Sales Order is still OPEN and with not delivered status. Requirement is system should automatically set the sales order status as completed and delivered once delivery is done using VL10B so that sales order will not be available for planning again the same quantity.
    Any suggestions please?
    Thanks & Regards,
    RSR

    Hi Chandrasekhar,
    Yes, u are right. I did not deliver the customer sales order. But here the customer is Plant 2000 itself and we are doing the delivery and moving the stock using STO. Requirement is once delivery is done by STO the sales order status should update as completed and delivered. Any link can we have between STO delivery and sales order ??
    Thanks & Regards,
    RSR

  • Collective purchase order linke with auto replenishment process

    Hi!
    This is with reference to linking  collective putchase order with auto replenishment process.
    For eg: an article defined with replenishment parameter(the reorder point and target stock). while running collective purchase order using transaction wf10...will system consider the reorder point and target stock and raise the PO.

    Hi Jyotsna,
    The collective purchase order should be used in DC level. That means, based on Stores STO, system automatically converts STO requirements into CPO.
    If you want consider Reorder point and target stock, then this is putaway process. That means, DC will maintain and replenish stock based on your inventory norms fixed by you.
    Hope this information will be useful.
    Bye,
    Muralidhara

Maybe you are looking for

  • ICal problem with events

    iCal - since installing Lion, when I enter an event, it defaults to "all day" and the default end time is 8 hours later rather than 1.

  • Add new Item to Drag and Relate Menu

    Hi Dear; 1- how can i add a new item to drag and relate menu? 2- how can i link it to an sql statement? exp: user table (OUSR) best regards;

  • SQLDeveloper export data from script question

    Yes I can right click on a result set in the SQL editor and export to CSV, TEXT, EXCEL, XML, etc. Very nice. But is there a way to automate the export from the SQL Editor to avoid the manual right clicking using the engine built into SQL Developer to

  • Need skype no. only for 1 month

    hi, is that possible to have skype no only for 1 month?

  • Freight Accural

    Hi Guru,              I need to show a report where in I pull the sales and the billing document ,based on customer group ,and the dollar amounts for Merchanise total , Freight amount etc. Now for one customer, the frieght is paid by the the company