Product hierarchy is showing 'Not assigned Materials' in Bex Report

Dear Gurus,
I have loaded product hierarchy to 0material from 0PROD_HIER_LPRH_HIER successfully. In Bex report if i use product hierarchy nothing showing to me and it is showing message in one row like 'Not assigned Materials.
If i remove the Hierarchy i am able to see all materials in the report.
I have searched in sdn but i didnt get any help.Please help me in this issue.
Thanks & Regards,
chandu

Hi Ravi,
I have run the Hierarchy change run for 0material.but again it is showing same message 'not assigned materials'.
Regards,
chandu

Similar Messages

Not assigned value in Bex report

Hello experts,
One of the value in the BEx report is appearing as not assigned. What could be the reason?
Thanks
SP

Hi all,
In the back end system 0sales_office is attribute of 0customer,
Then I have activated the 0customer master data and done attribute change, I have such display at BEx reporting
customer        sales office(key)       sales office(text)                      Sales
9876554               0010                         Michigan                         USD   4567
                                #                            Not Assigned                  USD   2563
although I expect to see
customer        sales office(key)       sales office(text)                      Sales
9876554               0010                         Michigan                         USD   7130
Is there anything I do miss?

Hierarchy showing not assigned in Bex report

Hi all,
I created an hierarchy on an infoobject, I included this infobject in a cube without populating the hierarchy infoobject in the cube (as I only need it for selection in the variable screen).
However the hierarchy is showing unassigned without relevant nodes; all the nodes are active in the H table.
how can I get the hierarchy to show in the variable screen or report?
please any suggestions on this?
Many thanks

Hi,
In the Query Designer, you can restrict characteristics by hierarchy or by hierarchy node, on a fixed or variable basis.
Hope below link helps you.
http://help.sap.com/saphelp_nw04s/helpdata/en/83/096d399bd2046fe10000000a114084/frameset.htm
Regards,
Vinay

How to get rid of a "not assigned" line in Bex

Hello Experts,
I feed a Cube with two ODS-Objects, one fpr orders and one for items.
ODS1 provides the number of orders and
ODS2 provides the number of items and the charachteristic item_type for the dimension item.
Because the charachteristic item_type is not provided by ODS1 there is a "not assigned" line at the bottom of the table in Bex!
How can I get rid of this line? I want to avoid usong seperate Cubes for Orders and Items!
thanx
hiza

Hi Hiza.
In the query designer restrict item_type to # -> right click on # -> exclude from selection.
Hope it helps.
BR
Stefan

Not assigned and # in BEX 7.0 WAD

Hi all,
In the report I have a characteristic time Z object.
In the portal, For the value 00:00:00 (midnight) it displays '#' instead of 00:00:00. Is there a way around this?
Also in Javascript is it posible to change 'Not Assigned' to some other verbiage?

Hi Raj,
Not too sure how to fix your midnight issue but I have some javascript code that toggles the # or Not Assigned values and hides them by turning their text to the colour of the background. I have this attached as a context menu item of the column headings, but could be applied to any element with a bit of playing around.
See below :-
function showHideNullItems()
var mytab = document.getElementById("GR1Table");
// var myrow = mytab.getElementsByTagName("TR");
// for (j=0;j<myrow.length;++j) {
var mycells = mytab.getElementsByTagName("TD");
for (l = 0; l < mycells.length; ++l) {
    if (document.all) {
       var textToCompare = mycells[l].innerText.replace(/^\s+|\s+$/g, "");
       var compStyle = mycells[l].currentStyle['backgroundColor'];
     } else {
       var textToCompare = mycells[l].textContent.replace(/^\s+|\s+$/g, "");
       var compStyle = getComputedStyle(mycells[l], null).backgroundColor;
    if (mycells[l].firstChild.style) {
       if ((mycells[l].firstChild.style.color != compStyle) && (textToCompare == "#" || textToCompare == "Not assigned" )) {
         mycells[l].firstChild.style.color = compStyle;
       } else {
         mycells[l].firstChild.style.color = "";
    } else {
       if ((mycells[l].style.color != compStyle) && (textToCompare == "#" || textToCompare == "Not assigned" )) {
         mycells[l].style.color = compStyle;
       } else {
         mycells[l].style.color = "";
Hope this is useful.
Cheers
Craig

Product hierarchy wise Target sale v/s Actual sale report

hi
i have a BILLING ITEM cube which contains Actual sales fig. I also want to develope a cube in which i have Target sales fig. Product hierarchy wise. i have the product hierarchy wise data in an excel sheet. my questions are
1. how can i develope a cube containing the product hierarchy wise data.
2. how to develope a multiprovider using the above cubes so that when i will write query on the MP, i will be able to get report like
Product hier         Target sale                 Actual sale
Fans
|- Ceiling Fan          1000                             9000
|- Exhuast Fan         800                               850
pls help. its urgent. if able to give any sample example of the above queries to refer, it will b a great help.

Hi,
Why don't u put ur product hierarchy in column on top of key figure, query will fetch the amount for each hierarchy value.
try this it might help u.
Rajesh

Field "Not Assigned" in the Bex Query

Hi All,
I've build a query which target is a multi-provider ( 1 Cube + 1 ODS ).
My 2 InfoProvider are joined by 0material.
In my Query fields(from the ODS) are "Not Assigned" when displaying the result ?
Someone has an idea, plz ?
Thanks a lot,
Erwan.

Hello ErWaN,
How r u ?
Check this thread.... seems to be the same issue....
# and Unassigned - in BW Report
Best Regards....
Sankar Kumar

How to show the units separately in BEx reporting

My Bex reporting shows the units along with keyfigures. Say 15.45Kgs. i would like to show the units separately in a column. Pl tell me how to do it.

Hi,
you can do it. follow the below steps.
1) create a calculated key figure by assigning the function NODIM to the base key figure (NODIM<base key figure).
2) Drag and drop the unit info-object ( the unit info-object that is used in the key figure definition) in the rows section.
3) Hide the base key figure.
Hope it helps.
Thanks
Soumya

BEx Report- Not assigned is displaying in report

Hi All,
I'm running a report on remote cube.
I maintained all master data values for one char which has navigational attributes.
When i run the report it showing for not assiagned to one value for rest it showing the values.
I did the change run also.
Any guesses.
Thanks.

baazi,
U need check whether data exists for the combination of characteristics say if u have 3 chars
Char1    char2    char3(NAV)
ABC       M01      A123
ABC       M02        #
means there is no record for the combination ABC and M02 .
Like this u have to do the analysis.
Hope it helps
bhaskar

Cal year / Month is not populating correctly in Bex report

Hi Experts,
We have a bex query on virtual provider with only one column in it i.e 'cal year / month'. I'm having the problem with this column.
In the excel output of this report the cal year /month is displaying in this sequence.
01/0000     02/0000     03/0000     04/0000     05/0000     06/0000     07/0000     08/0000     09/0000     08/2008     09/2008     10/2008     11/2008     12/2008     01/2009     02/2009     03/2009     04/2009     05/2009     03/2010     04/2010     05/2010     06/2010     07/2010     08/2010     09/2010     10/2010     11/2010     12/2010     01/2011     02/2011     03/2011     04/2011     05/2011     06/2011     07/2011     08/2011     09/2011     10/2011     11/2011     12/2011     01/2012     02/2012     03/2012     04/2012     05/2012     06/2012     07/2012     08/2012
I'm not getting why the first 9 columns its displaying as 01/0000     02/0000     03/0000     04/0000     05/0000     06/0000     07/0000     08/0000     09/0000     .
It should display as
08/2008     09/2008     10/2008     11/2008     12/2008     01/2009     02/2009     03/2009     04/2009     05/2009
06/2009        07/2009        08/2009         09/2009         10/2009        11/2009        12/2009        01/2010         02/2010         03/2010     04/2010     05/2010     06/2010     07/2010     08/2010     09/2010     10/2010     11/2010     12/2010     01/2011     02/2011     03/2011     04/2011     05/2011     06/2011     07/2011     08/2011     09/2011     10/2011     11/2011     12/2011     01/2012     02/2012     03/2012     04/2012     05/2012     06/2012     07/2012     08/2012
My data source is fetching the correct data including this cal year/ month.
Thanks in advance for your help.
Regards,
Brahma Reddy

It seems there are some records of "cal year/month" with value 01/0000 02/0000 03/0000 04/0000 05/0000 06/0000 07/0000 08/0000 09/0000
2 possible solution:
1) Check the data again, you may simply filter them by restrict the cal year/month to the specific value (01/0000)
2) restrict the cal year/month, only allow 2008/8 + value in the result.

Unable to remove the Set Type assignment to product Hierarchy

Hi
I have created a set type and assigned to a product hierarchy.
Now I want to undo the assignment as this has been inherited by the lower level hierarchies.
Can anyone suggest how to remove this.
Thanks & Regards
Subhabrata

Hi Dash,
Sorry to say that once you have assigned the set type to a product hierarchy you can not remove this.
Best regards,
Vikash.

Regading not assinned materials in product group

pls help me when we create a daily sales report in BW , then some articles show in not assigned in articles groups. eg , like some articles show sales , shirt 20 pc , jeans 30 pc , and some r show not assigned 12 pc, like this,
pls give me solution.
Regards,
S.rahman

Hi,
Check weather they are assigned to article groups in ECC(Source system). If they are assigned there then load your masterdata and then Transactional data again.
Regards
R Karthik K

Show blank texts instead of key or 'not assigned' in query-result

Hi,
is there a way / workaround to
1. suppress # / 'not assigned' in query results?
or
2. show blank texts (if maintained) instead of the key
(when showing texts for a characteristic in a query all characteristics with blank texts - none or ' ' -
will show the key instead of the blan text) ?
Thanks,
Christoph

Hi Christoph,
there have been several posts concerning this topic. As Saad told there is no direct way within SAP standard to reach this aim.
Depending on the Front-End Tools you are using these posts may help:
Not assigned and # in BEX 7.0 WAD
how to set field to blank if the data is # or unassigned
Brgds,
Marcel

It shows vlaues # not assigned

Hi Friends,
I have created the multiprovider for 0sd_co3& co4 and load the unloading point,
I have created query for multiprovider,
in that query all values shows , company code and unloading point put to same query it shows only one value and reaming character shows # not assigned
why it shows any link to company code and unloading point plz tell me suggestions.

Hi Prasana,
You can define the settings on how the data should be displayed for Mixed result or Null values or Division by Zero values
SPRO -> SAP reference IMG -> SAP Netweaver -> Business Intelligence -> Settings for Reporting and analysis -> General settings for reporting and analysis ->Presenting numeric values in Business explorer
here you define the setting to display Null values/No result as blank.
hope it helps
Uday.

Customer Hierarchy and product Hierarchy

Hi friends what is customer Hierarchy and what is product hierarchy?
please explain step by step with examples.
mail id: [email protected]
Thanx.

Hi Sirivas,
CUSTOMER HIERARCHY:
Customer hierarchies are available in Sales and Distribution, so that you can create flexible hierarchies to reflect the structure of customer organizations. If your customer base includes multi-level buying groups, cooperatives, or chains of retail outlets, for example, you can create hierarchies to reflect the structure of these groups. Use customer hierarchies during sales order processing and billing for determining pricing and running statistics.
 A customer hierarchy consists of nodes.
 To create a customer hierarchy:
1. Create master records for each node.
2. Assign the nodes to each other.
3. Assign the customer master records to the relevant nodes.
 Hierarchy nodes are only valid for a certain period of time. They may also be moved. If a node is moved, the system automatically reassigns all related nodes and customer master records.
With customer hierarchies, you can assign price or rebate agreements to a higher level node. The agreements are then valid for customers at all subordinate levels to this node. You can create pricing condition records for each node indicated as relevant for pricing. If one or more nodes in the hierarchy path of a sales order contain pricing information, the system takes them into account automatically during pricing.
'How to check'
All the customizing is in SD/Master Data/Business Partner/Customers/Customers hierarchy
All the customizing is in SD/Master Data/Business Partner/Customers/Customers hierarchy
1) Define hierarchy type: just put and ID and a name to the new hierarchy.
2) Set partner determination: if you want to user the hierarchy in price determination, then, in the orders, at the header level, you have to have a Partner Procedure with a partner function for each level. In the partner procedure, in each partner function you must indicate the source partner function. With this information, in the order, you obtain the business partner for each partner function.
3) Assign account groups: you indicate which accounts groups are allowed for being part or your hierarchy.
4) Assign sales areas: simple you indicate which sales areas are allowed in your hierarchy. (Here you can customize common sales areas, just for not having to build de hierarchy in all the different sales areas).
5) Assigning hierarchy type for pricing: you indicate which classes of documents uses hierarchy in pricing determination.
It is possible to maintain so called customer hierarchies. This might be useful when for example you create a condition discount for a customer that is part of such a hierarchy structure. All subnodes in the hierarchy below that customer, will thus receive the same discount.
Customer hierarchy setup, firstly decide the hierarchy type to be used.
The standard is type A.
You can also assign a partner function to the customer so that the higher level customer in the hierarchy is copied into a sales order as a partner function - but you don't need that right?
Next assign your customer account group to the hierarchy type. And enter the combinations that will be allowed for creating the hierarchy.
You want to assign a ship-to to a payer. So enter the ship to account group and enter the payer account group as the higher level.
You must also make an entry for permitted sales area assignments. So if you want to a hierarchy for customers in the same sales area then enter the sales area and enter the same one as the higher level sales area.
All these settings can be found in the IMG. Under SD - master data - business partners - customers - customer hierarchy
You use for example customer hierarchy when you have an company like Unilever and you agree both on a discount. Unilever does have different locations / businesses and you have to maintain the discount for all customers. If you use a customer hierarchy you can maintain the discount for the partner in the top of the hierarchy and in this way it will be valid for all customers in the hierarchy.
Product Hierarchy:
The product hierarchy on the Basic Data screen is used to depict the competitive materials of competitor 1 in relation to those of competitor 2. Here, your own company and its materials are also regarded as a competitor and as competitive materials respectively. You can use this representation as a basis for market analyses.
Normally we enter competitive materials using material type WETT. When entering your own materials as competitive materials, you can, however, display the product hierarchy on the Basic Data screen for other material types too.
Requirement type determination is based on the "Origin of requirement type in requirement type determination"
In this field you can select an alternative search strategy (source):
Source 0 = Material master strategy, then item category and MRP type
Source 1 = Item type and MRP type strategy
Source 2 = Item type and MRP type strategy (as for source 1) with additional check of the allowed requirements type
e.g. If you set value "0" system will first strategy group in material master based on that it will determine requirement type and no value found then it will determine requirement type based on item category and MRP type.
Above settings can be found at SD --> Basic Functions --> Availability Check and transfer of requirement --> Transfer of Requirement --> Determination of Requirement type using Transaction
For make to order std strategy group 20 is used to which req type KE is assigned.
Check
Check in Tcode OVZH, what requirement class is assigned to your requirement type
Check in Tcode OVZG, what value is assigned to field "Consumption" in requirement class because that determines consumption posting.
The product hierarchy is used to group materials by combining different features. It is used for analyses and pricing. A product hierarchy can consist of up to Eighteen characters. Its features can be combined in various ways.
Example: A dishwasher can be described by product hierarchy 000010000200000002. This series of characters states that dishwashers belong to the category electrical appliances (series of characters 00001, position 1-5), and also to wet appliances (series of characters 00002, position 6-10) and, finally, to dishwashers (series of characters 00000002, position 11-18).
One can maintain the product hierarchy via transaction "OVSV" and "V/76.
Path = IMG-Logistics General-Material master-Setting for Key fields-Data relevant to SD-Define Product hierarchy.
The product hierarchy is maintained in the Basic Data view of the material master record, and is used for evaluation as well as price determination in materials management.
The standard SAP allows only 3 levels, but you can go up to 6 levels, for additional 3 levels u will have to take abapper help and add 3 more fields and corresponding data element into structure. So that in material master drop down you will see 6 levels.
The transaction which will be useful to change product hierarchies for material master will be V/76.
Yes, You can print the levels of the product hierarchy through a report.
Use the view SE16 - V_T179 (Table Name) to display Product hierarchy with level numbers.
Field Name is PRODH
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Product hierarchy is showing 'Not assigned Materials' in Bex Report

Similar Messages

Maybe you are looking for