Product Revenue Bookings and Backlog Dashboard does not display any data
Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?
hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S
Similar Messages
-
ReportViewer control used with a remote report does not display any data.
Hi there,
I have this .rdl report that runs just fine on our reporting server (I can see that when I try to run the report by accessing its URL in a browser). However, when I run it in my Windows-based application, I do not see any data. My report has two input parameters
and it needs to impersonate the caller's identity because the database uses Windows Authentication.
Here is the code I use:
var reportViewer = new ReportViewer();
// Set Processing Mode
reportViewer.ProcessingMode = ProcessingMode.Remote;
// Set report server and report path
reportViewer.ServerReport.ReportServerUrl = new Uri("http://MySsrsServer/reportserver");
reportViewer.ServerReport.ReportPath = "/Reports/MyReport";
// set the credentials
reportViewer.ServerReport.ReportServerCredentials.ImpersonationUser = WindowsIdentity.GetCurrent();
// create report parameters and set them in the report
var param1 = new ReportParameter("First_Param", "Some string");
var param2 = new ReportParameter("Second_Param", "Some other string");
reportViewer.ServerReport.SetParameters(new ReportParameter[] { param1, param2 });
using (var reportForm = new ReportForm(reportViewer))
reportForm.ShowDialog();
The ReportForm is just a regular Form that has a member of type ReportViewer. In the class' constructor, I assign the member:
public ReportForm(ReportViewer reportViewer)
InitializeComponent();
try
this.reportViewer = reportViewer;
reportViewer.SetDisplayMode(DisplayMode.PrintLayout);
reportViewer.Dock = DockStyle.Fill;
reportViewer.ZoomMode = ZoomMode.Percent;
reportViewer.ZoomPercent = 100;
reportViewer.RefreshReport();
catch (Exception exception)
MessageBox.Show(exception.Message);
Using database level tracing, we were able to confirm that the two Stored Procedures used by the report are called and they return correct and valid records. However, in the form nothing shows up:
Any suggestions?
TIA,
EdGood to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,.... -
Results view does not display any data
Hi
Every time I execute a query in the sql worksheet, I do not see anything in the results view. I only see the ouput in the output script folder. The output script view display is just like the usual sqlplus screen results. I want to look at the results in a table format that is suppose to be displayed in the results view.I used F5 and F9 to execute the query.
Can anyone tell me why this is so?
Example below is what I see in the output script view, when I run the query below.
select file_name,tablespace_name from dba_data_files;
FILE_NAME
D:\ORACLE\ORADATA\ORA92\SYSTEM01.DBF
D:\ORACLE\ORADATA\ORA92\UNDOTBS01.DBF
D:\ORACLE\ORADATA\ORA92\CWMLITE01.DBF
D:\ORACLE\ORADATA\ORA92\DRSYS01.DBF
D:\ORACLE\ORADATA\ORA92\EXAMPLE01.DBF
D:\ORACLE\ORADATA\ORA92\INDX01.DBF
D:\ORACLE\ORADATA\ORA92\ODM01.DBF
D:\ORACLE\ORADATA\ORA92\TOOLS01.DBF
D:\ORACLE\ORADATA\ORA92\USERS01.DBF
D:\ORACLE\ORADATA\ORA92\XDB01.DBF
D:\ORACLE\ORADATA\ORA92\TEST01.DBF
11 rows selected.
I want to be able to see the results in the results view in a table format. Why is this not happening?
Thanks.It works for me, when I use F9. Ensure you select the statement (unless it's the only statement) then press F9, or click the triangle button.
I guess it makes sense for F5, or execute script, to not show a table as there may be many selects, and other statements, in a script and there is no specific return value from a script.
Message was edited by:
TonyW -
Corresponding table in the source system does not contain any data -URGENT
Hi Guru's,
I have already uploaded master data.
I have created infosource added infoObjects to it and activated it to create communication strucure.
M using RSA1OLD transaction.
and assigned datasource to infosource ie source system name and clicked ok.
save datasource to infosurce assigned msg displayed, clicked ok.
transfer rules r created, i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv
in datatargets tab selected data target as infocube. n then in schedule tab start data load immediately and clicked ok.
everything is fine upto schedule n in monitor it does not display any data.
what will be the problem??i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv ??
Are you loading the data from flat file or R3? If you are loading it from R3, why are you giving the Flat file name?
In this case, check in RSA3 (R3 side), whther the datas source is getting the value.
In case you are loading a flat file, you need to create a flat file data source and assign to the infosource.
Thanks..
Shambhu -
To move the iTunes library to this new computer I switched on Home Sharing and can see the other libraries on my home network. If I select tracks from a Shared library I can't import them as the strip containing "Show: All Items" and the "Settings" and "Import" buttons, does not display at the bottom of the screen. Goes straight from the list of tracks to the strip with Playlist icons and xxxx items, tttttt total time, yyyy GB.
Any suggestions for making the Import button appear?I hvae the EXACT same issue
I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
what do i do
windows 7 64 bit -
I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.
I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.
-
Mac computers - FF 29.0 and 30.0 does not display the video layer in the Revolution Slider section of WordPress site. Why?
We prepared simple Word Press web site. We used a Revolution slider plugin with HTML5 video layer. It works properly on Chrome, Safari, older Mozilla FF.
But we had a problem on PC computers with FF 29.0 30.0 – after reinstall of browser everthing seems to be OK. The slider works. Unfortunately even the reinstallation on Mac computers does not help. There is no visible video on Mac FF 30.0.
We are looking for some information what we can do to solve this problem. Could you help?Can you play the video on YouTube?
*http://www.youtube.com/watch?v=Ugh2YvHU7D0#t=58
Note that Mac lacks support to play MP4 files natively without using a Flash player. -
I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?
I'm not clear on exactly what it is you're asking, but if you're referring to changing opacity, you can change the opacity setting for the States of a menu item via the States panel and Control Strip.
-
When I burn a disc from a playlist in iTunes on my MacBook, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.
No, this standard has been implemented for several decades.
How iTunes remembers audio CDs - http://support.apple.com/kb/TA27785
It is just conceivable you burned a CD that exactly matched one already in the Gracenote database. Gracenote uses track count and duration to decide what CD it is you have in a computer. If you have one that matches that it will label it. You could conceivably even have one that matches it that is not the correct one.
This script will only work on Macs:
http://dougscripts.com/itunes/scripts/ss.php?sp=cdtexttocdinfo - script to use CD-text file on CD to label CD in iTunes -
My top and under folder does not list any images
Suddenly, my top and under folder does not list any images ?
For exemple : lightrom 0 /2013 0 /2013-05-11 126
LR5 ; I run windows 8 64bits
Thanks for your help.
Best regard
RegisLibrary Menu, select "Show Photos in Subfolders".
-
I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?
Hi ..
Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Back to Safari. Press Command + Option + E to empty the Safari cache.
Quit and relaunch Safari, try a video. -
My iphone 4s will not connect to networks. the button is greyed out and cannot turn on. I have reset the network settings and it still does not work - any ideas?
Thank you I tried the reset again did not fix- I think I am down to calling Apple and paying for a tech - phone company says it is a software problem. I just updated to 8.1.3 - I thought the update might fix it.
-
Managed System Configuration ! The table does not contain any data !
Hi,
In Sol Man Setup , Managed System Configuration, in phase 6 - Create Logical Componets -
There is no Product Version and Product Instance Available.
The message is : " The table does not contain any data "
How can correct this problem ?
ThanksHi,
while creating new Logical Component via SMSY , you need to specify Product first.
e.g. if you managed system is ERP 6.0 , select Product as SAP ERP
once you select Product , it automatically fetches information for product Version and Main Instance depending upon Product field input.
Please check and let us know if issue still persits.
Thanks,
Rupali -
Creative Cloud desktop app does not display any means of signing in to my account. What would be the reason
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
or
Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html -
DataGrid does not display XML data
Hello, and thanks for reading this...
I am having a problem displaying XMLList data in a DataGrid.
The data is coming from a Tree control, which is receiving it
from a database using HTTPService.
The data is a list of "Job Orders" from a MySQL database,
being formatted as XML by a PHP page.
If it would be helpful to see the actual XML, a sample is
here:
http://www.anaheimwib.com/_login/get_all_orders_test2.php
All is going well until I get to the DataGrid, which doesn't
display the data, although I know it is there as I can see it in
debug mode. I've checked the dataField property of the appropriate
DataGrid column, and it appears correct.
Following is a summary of the relevant code.
...An HTTPService named "get_all_job_orders" retrieves
records from a MySQL database via PHP...
...Results are formatted as E4X:
HTTPService resultFormat="e4x"
...An XMLListCollection's source property is set to the
returned E4X XML results:
...The "order" node is what is being used as the top-level of
the XML data.
<mx:XMLListCollection id="jobOrdersReviewXMLList"
source="{get_all_job_orders.lastResult.order}"/>
...The "jobOrdersReviewXMLList" collection is assigned to be
the dataProvider property of a Tree list, using the @name syntax to
display the nodes correctly, and a change event function is defined
to add the records to a DataGrid on a separate Component for
viewing the XML records:
<mx:Tree dataProvider="{jobOrdersReviewXMLList}"
labelField="@name"
change="jobPosForm.addTreePositionsToDG(event)"/>
...Here is the relevant "jobPosForm" code (the Job Positions
Form, a separate Component based on a Form) :
...A variable is declared:
[Bindable]
public var positionsArray:XMLList;
...The variable is initialized on CreationComplete event of
the Form:
positionsArray = new XMLList;
...The Tree's change event function is defined within the
"jobPosForm" Component.
...Clicking on a Tree node fires the Change event.
...This passes an event object to the function.
...This event object contains the XML from the selected Tree
node.
...The Tree node's XML data is passed into the positionsArray
XMLList.
...This array is the dataProvider for the DataGrid, as you
will see in the following block.
public function addTreePositionsToDG(event:Event):void{
this.positionsArray = selectedNode.positions.position;
...A datagrid has its dataProvider is bound to
positionsArray.
...(I will only show one column defined here for brevity.)
...This column has its dataField property set to "POS_TITLE",
a field in the returned XML record:
<mx:DataGrid width="100%" variableRowHeight="true"
height="75%" id="dgPositions"
dataProvider="{positionsArray}" editable="false">
<mx:columns>
<mx:DataGridColumn width="25" headerText="Position Title"
dataField="POS_TITLE"/>
</mx:columns>
</mx:DataGrid>
In debug mode, I can examine the datagrid's dataProvider
property, and see that the correct XML data from the Tree control
is present. However, The datagrid does not display the data in any
of its 6 columns.
Does anyone have any advice?
Thanks for your time.Hello again,
I came up with a method of populating the DataGrid from the
selected Item of a Tree Control which displays complex XML data and
XML attributes. After the user clicks on a Tree branch, I call this
function:
public function addTreePositionsToDG(event:Event):void{
//Retrieve all "position" nodes from tree.
//Loop thru each Position.
//Add Position data to the positionsArray Array Collection.
//The DataGrid dataprovider is bound to this array, and will
be updated.
positionsArray = new ArrayCollection();
var selectedNode:Object=event.target.selectedItem;//Contains
entire branch.
for each (var position:XML in
selectedNode.positions.position){
var posArray:Array = new Array();
posArray.PK_POSITIONID = position.@PK_POSITIONID;
posArray.FK_ORDERID = position.@FK_ORDERID;
posArray.POS_TITLE = position.@POS_TITLE;
posArray.NUM_YOUTH = position.@NUM_YOUTH;
posArray.AGE_1617 = position.@AGE_1617;
posArray.AGE_1821 = position.@AGE_1821;
posArray.HOURS_WK = position.@HOURS_WK;
posArray.WAGE_RANGE_FROM = position.@WAGE_RANGE_FROM;
posArray.WAGE_RANGE_TO = position.@WAGE_RANGE_TO;
posArray.JOB_DESCR = position.@JOB_DESCR;
posArray.DES_SKILLS = position.@DES_SKILLS;
positionsArray.addItem(posArray);
So, I just had to manually go through the selected Tree node,
copy each XML attribute into a simple Array, then ADD this Array to
an ArrayCollection being used as the DataProvider for the DataGrid.
It's not elegant, but it works and I don't have to use a Label
Function, which was getting way too complicated. I still think that
Flex should have an easier way of doing this. There probably is an
easier way, but the Flex documentation doesn't provide an easy path
to it.
I want to thank you, Tracy, for the all the help. I checked
out the examples you have at www.cflex.net and they are very
helpful. I bookmarked the site and will be using it as a resource
from now on.
Maybe you are looking for
-
Why cant i ping any host/servers behing my Firewall Cisco 5505
Can anyone please help me to figure out what in my configuration of the Cisco asa 5505 is wrong or missing. I have multiple host behind my firewall these hosts run different websites on port 80. I am able to ping the server from one to another but I
-
I have created 2 jtextfields to enter a start and stop date for printing a report within the date range selected. How do format the jtextfields to insure they are properly date formatted i.e. MM/dd/yyyy Thanks, William
-
How to create complicated materials or product ?
Hi, is that possible in MM or SD to create a Software Produkt with release, component, componentrelease and patch? thanks
-
Cannot install update, other firefox is runnibg, close first. but there is not any program running
Firefoc probeert een update te installeren. Venster verschijnt: kan de update niet installeren omdat een ander firefox in gebruik is. Sluit firefox. Er is echter geen ander firefox in gebruik. Als ik het schermpje weg tik, komt het steeds terug. Wat
-
Updated plug-ins, you tube/life stream still stopping and starting
My computer has always run you tube video/life feed fine. Last week it started starting and stopping, I updated adobe plug ins yesterday, it was running great. Today it is stopping and starting again? Any Advice? I've run anti-virus scan-- fine-- res