Product version doesn't list in dropdown for MOPZ

All,
We have a solman on version 7, EHP1, sp24 where I am having trouble to download the patches for a newly installed netweaver portal system. The new Netweaver Portal 7 has EHP2 as default and so I want to patch to the latest patches for a project.
So when I invoke the mopz and then select the portal system and view the product version drop down no values are populated. So I am unable to progress with the download of patches to be downloaded.
So I have retraced my steps back and providing you the list of steps done.
I have added this new system in smsy through server, database, product system, technical system.
After which I created the solution landscape and here I have not been able to maintain the logical component.
Once I click on the F4 button for logical component it brings components and when I select SAP netweaver, no values are seen below this for selection. I believe this is the cause of MOPZ also being unable to display the product version.
I am not sure if any of you have encountered this situation or if I am missing anything here.
I would be glad if some one can share or suggest their views.
Cheers Sam

Hi,
Check SAP Note 1141406 - Product (version) is missing in SAP Solution Manager (SMSY)
Thanks
Sunny

Similar Messages

LTP consider production version and not consider selection id for routing

Dear guru.
I run mrp long term planning for a material.
The material have a production version linked to a specific bom and routing.
In trx OPU5 I have defined that the planning scenario consider a specific selection id for routing , this routing is different from the routing of production version.
The result is that for this material ltp donu2019t consider any routing and no evaluation activity is possible.
Do you know a solution in order that for LTP the system donu2019t consider production version and instead only consider OPU5 settings ?
Thanks for your interesting.

Dear CONS SAP,
Create a new planning scenario in T Code MS31 and then maintain the scheduling parameters for this planning scenario and
assign this selection Id and then execute and check.
Check and revert
Regards
Mangalraj.S

Apple doesn't list quicktime download for 64 bit windows 8.1

The apple store lists QuickTime 7 Player free for PC and Mac. It states it is
for Windows XP, Windows Vista or Windows 7.
However, I have a 64 bit windows 8.1. Will the Quicktime 7 player install on Windows 8.1 or is there another version available?

I am having the same problem. I'm wondering if anyone has successfully installed on a windows 8 machine?

3.1.1. doesn't list episode numbers for TV shows?

What gives? It tells me all the seasons and episode names but not the episode number.
This is not remotely helpful.

bug reports: http://www.apple.com/feedback/ipodtouch.html

How to select the production versions for MTO?

Hi PP Experts,
In our scenario we have two production versions and also we are in MTO strategy. While creating the sales order is there any option to select the production version (i.e.) before planning for that corresponding sales order I have to choose the production versions.
Example:
Material u2013 A -
sale order u2013 666001 u2013Prod version - 0001
Material u2013 A --- sale order u2013 666002 u2013 prod version - 0002
How to map the above scenario?
Thanks in advance.
Regards,
Vimal

In our scenario we have two production versions and also we are in MTO strategy. While creating the sales order is there any option to select the production version (i.e.) before planning for that corresponding sales order I have to choose the production versions.
If the Production version selection is based on Lot size means No problem.
If both the Production version is same lot size, system will select the first PV only in MRP
In STD SAP, we can't Give Production Version in sale order level,
If you want after MRP run , U can assign Production version in plan order or in production order Manually

Maintenance optimizer transaction dont see product version for a solution

Hi,
I am having a very difficult time in understanding the concept of solution manager product system,instance,solution. Now, in Technical Administration >> Solutions >> I click on a solution, in the solution the product column is missing. Then it appears after some configuration.
Now, when I create a maintenance optimizer transaction, I select the solution but I don't see the see product version, nothing appears.
Please guide

Hi Shashank,
If I am getting you correctly then you are not getting product version in drop down in a new MOPZ transaction ?
Use below steps:
Run Transaction Solman_Workcenter.
Select the Solution Manager Administration tab.
Click Solutions.
Either.
Create a new Solution to add the logical component, or add it to an existing solution.
If a new solution...
Click on New.
Give the solution a name.
Set the Solution Data settings.
Now the Solution exists.
Select an existing solution that you want the System to be placed (can be the new one).
Add the Logical Component to the Solution.
If the system is other than Type Production then...
Go to change edit mode.
Right click on the SID, and select “Put in Solution” the cell the SID is in will turn green.
Save.
Regards,
Divyanshu

Project "Installer Build Product version" vs exe version

Hi,
Can someone help me understand why the "Installer Build" in a project has a "product version", which later shows up in the Windows add/remove programs?
I must be missing something because to me it seems very strange that what they call "product version" in the installer is not automatically linked to the compiled exe version that the installer is built for?
Now I have to try and remember to manually keep these two versions synchronized, and the build 'product version' doesn't even have the same number of fields as the exe version information?!
It's strange when my program splash screen shows "V1.2.0.8" (read by the app by inspecting its own exe) but in the windows add/remove programs, it could say something totally different, such as 1.0.6...
Why is it like this?? How do other people use/handle these various version numbers? -is there a way for my app exe to find what the installed "product version" is?
---Confused...
-QFang
QFang
CLD LabVIEW 7.1 to 2013

QFang wrote:
I suppose it helps explain.. Perhaps I just need to think differently about how to name our installers.. Divorce the installer name from the (main) application name, then the difference in version numbers wouldn't be confusing.
Ideally the NI builder would be flexible enough that you could have a "Company Name" as the "installer name" and you could add/remove/maintain the whole company's product list with that same installer, similar to the NI installer.. sounds like a lot of work though.
Thanks for replying!
It does sound like a ton of work! I have to belive it is feasable with TKs like VIPM and Deploy on the market. (A few others I am less familliar with come to mind as well) Niether is exactly what you seem to want but demo that the tech is there!
Jeff

System shows wrong product version in smsy and SMD Setup Wizard

Hi
We have a SOLMAN EHP1 SPS22 running. The Satellite systems are correctly registered in SLD, also the SOLMAN Fetchjobs is running successfully.
I wanted to run the SMD Setup for a NetWeaver ABAP system, when I click in the Setup Wizard on the System the following link is under Managed Products apears: [NOT DIAGNOSTICS RELEVANT] .
By clicking the link you get the products to be managed, but i only two products are for selection.
SAP ERP 6.0 and SAP FSCM 6.0.
In smys checked the assignment in Systems --> <SID> in the Header Tab I clicked Installed Product version. The List in the Pulldown menu in "Product" are the same as above: SAP ERP 6.0 and SAP FSCM 6.0.
I tried to assign the product manually with no luck. Running the Solman_setup for the Diagnostics did not solve the problem either.
Thanks for your help
Murat

Hi Stuart,
In SolMan, goto t-code SMSY-> Product Definitions-> Select any product.
On the right hand side, click on the button "System Roles"-> Click "Select Product".
Now activate the relevant product as required by clicking on the "Active" checkbox.
Hope this helps!
Regards,
Rinkal

Production Version at item catagory "L" PO

Hi,
Can i select the production version at Purhcase order lelve for item catagory L- Subcontracting Purchase order.
We can do it at Info record level , but is it possible to do at PO level? if yes then How?
Thanks,
Samir Bhatt

Hi Samir,
Follow these steps to get your required Production version when you create PO
We assume two different vendor with different BOM for Material "X"
1.Create BOM with alternative 01 and 02 for material "X",
2.Add those BOM in production version in material master MRP4 view for material "X".
3.Create Info records with Production version (Step 2 material master) in Purchasing Organisation View for each vendor.
4.Create Source list for material "X"
5.Now go to ME21n enter the required vendor and material "X", it will automatically default your required production version.
Hope these steps will help you,
Cheers!!!
Gopi.

Urgent :-PIR Saving w.r.t multiple Production version/Month wise

Hi,
1) Please let me know whether It is possible to enter Planned independent requirement saving in MD61 Txn code month wise & with respect to three Production version..
i.e. in detail,
I am having 3 alternative BOMs of the same finish material. I want save the Independent Requirement in a particular month with respect to 3 BOMs /3 Production Version wise in the same month.
After that I want to run MRP multilevel planning which will create planned orders of Finish Products & Dependent materials exploding corresponding BOM with respect to the particular Production Versions.
2) Please let me know the best suitable strategy which will not consider present stock & Production/Planned orders in hand , will only create planned orders from the PIR saved in the Demand Management.
Please sugggest the best way to do. I am in pressure from the client.
Regards

Hi
PIRs cannot be created for 3 production versions.
In MRP documentation, check for quota arrangement. Planned orders can be assigned to three different production versions in equal quantities by the quota arrangement.
MRp run reads the quota file MEQ1 when it has to distribute planned orders across three production versions.
Regards
Pragnesh

Creating Production Order with wrong production version

Hello Expert,
please provide me answer and solution to resolve our problem regarding creation of production order (CO01 and CO41), because SAP provide and propose production version which have alternative BOM which is status 02 (inactive) already it is not picking the production version which has active alternative bom for our finished material. it is allowing the production to be created even the bom was inactive.
please help us to this it still bugging our system
tenx

Hi Ryan,
Production version will be selected based on the field Selection Method field in Material Matser MRP 4 view.
1 Selection by explosion date
2 Selection by production version
3 Selection only by production version
If the selected field value is 1 , then system selects the version based on the validity dates i.e whichever production version is active on that day that will be considered in MRP.
If the selected field value is 2 by production version. Then system will select the First Prodution version mentioned in the Material Master MRP 4 View (production version Tab).
If the selected field value is 3 always only by production version. Then system will select the First Prodution version mentioned in the Material Master MRP 4 View (production version Tab).
So to address you query I suggest you to delete the production version PV1 with BOM 01 and Make production version PV2 will be available and active in seen as the first production version in teh screen.
Then for your inof purpose you want have the PV1 then re-create it as second version in the Version tab screen.
Regards
radhak mk

Create PIR with Production Version

Dears ,
Can I Create PIR with Production Version Specific
Best Regards
Rami

Hy Rami,
Yes you can select required Prod. Version With PIR itself.
To do the same follow below Path,
MD61/MD62 --- > Go to Schd. Line Tab ---> Go to Settings Menu --->
Production version.
After pressing that Tab for Prd. Version you will find Column for Prod. version gets Activated and there you can select your required Prd. Version.
System will explod the BOM and Recipe as per that Selected Prod. Version during MRP run.
Regards,
Dhaval

Download of production versions

Hello,
Is there any T- Code available to download all production version and its details in mass (for eg. a plant?) to excel sheet?
Regards,
R. Srinivasan

I don't think so. That would be a pretty big liability. You can always check SE16 for MKAL, PLKO, PLAS, PLPO, etc...
Generally, recipe details are secured pretty heavily.
Regards,
Roger

Cost Comparing both production version

Dear gurus,
Cost estimation is runned for the BOM with version 001 and saved, againn iam running the cost estimation for the same material with BOM version 002 and saved.
In the above case i need to see the report of cost estimation comparison for both the BOM.
how to i see this one
Regards,
s.sakthivel

Dear Sakthivel subramanian,
Once after executing CK11N for the respective production version you will get the itemization for the
material and you export that into a spreedsheet or a local file as per your need.
In the same way do it for each production version and save the datas as a local file and compare it.
check and revert back.
Regards
Mangalraj.S

Using a jQuery list box placed onto a tab control doesn't seem to work for posting?

Hello,
I developed a U.I. in Dreamweaver for a product and have several list boxes that use the onChange modifier to collect what the user selects from the list. I use the onChange=this.form.submit() function to grab the user's selection from the list box..
When this dropdown list box code is placed onto a form, it posts properly and I can retrieve the user's list selection. If however I place the list box code onto a Tab page from a jQuery Tab Control, developed in Dreamweaver, the posting doesn't seem to work.
I must be missing something because identical code is working fine when the list box code is placed on a form yet when the code is repeated from within a Tab, it isn't working.
The code is simple, and shown below). The list values are coming from a MySQL table.
$MyQuantity_query="SELECT * FROM Quantity_Table";
$MyQuantity_Result=mysqli_query($cxn,$MyQuantity_query) or Die ("Cannot connect");
echo"<select name='ThisQuantity[$RowCounter]' value='ThisQuantity[$Rowcounter]' onChange='this.form.submit()'><option value='-1' selected>Qty</option>";
While($MyQuantity_Row=mysqli_fetch_assoc($MyQuantity_Result))
extract($MyQuantity_Row);
echo"<option value='$Qty_Number'>$Qty_Number</option>";
echo"</select>";
Any suggestions would be appreciated. Thanks.
Joel
[email protected]

Thanks you.
I tried placing the selection list inside of
tags but posting still doesn’t seem to be working?
Regards,
Joel

Product version doesn't list in dropdown for MOPZ

Similar Messages

Maybe you are looking for